#include "usb_dev.h" #define USB_DESC_LIST_DEFINE #include "usb_desc.h" #include "usb_serial.h" #include #include "debug/printf.h" // device mode, page 3155 typedef struct endpoint_struct endpoint_t; struct endpoint_struct { uint32_t config; uint32_t current; uint32_t next; uint32_t status; uint32_t pointer0; uint32_t pointer1; uint32_t pointer2; uint32_t pointer3; uint32_t pointer4; uint32_t reserved; uint32_t setup0; uint32_t setup1; transfer_t *first_transfer; transfer_t *last_transfer; void (*callback_function)(transfer_t *completed_transfer); uint32_t unused1; }; /*struct transfer_struct { uint32_t next; uint32_t status; uint32_t pointer0; uint32_t pointer1; uint32_t pointer2; uint32_t pointer3; uint32_t pointer4; uint32_t callback_param; };*/ endpoint_t endpoint_queue_head[(NUM_ENDPOINTS+1)*2] __attribute__ ((used, aligned(4096))); transfer_t endpoint0_transfer_data __attribute__ ((used, aligned(32))); transfer_t endpoint0_transfer_ack __attribute__ ((used, aligned(32))); typedef union { struct { union { struct { uint8_t bmRequestType; uint8_t bRequest; }; uint16_t wRequestAndType; }; uint16_t wValue; uint16_t wIndex; uint16_t wLength; }; struct { uint32_t word1; uint32_t word2; }; uint64_t bothwords; } setup_t; static setup_t endpoint0_setupdata; static uint32_t endpoint0_notify_mask=0; static uint32_t endpointN_notify_mask=0; //static int reset_count=0; volatile uint8_t usb_configuration = 0; static uint8_t endpoint0_buffer[8]; static uint8_t usb_reboot_timer = 0; static void isr(void); static void endpoint0_setup(uint64_t setupdata); static void endpoint0_transmit(const void *data, uint32_t len, int notify); static void endpoint0_receive(void *data, uint32_t len, int notify); static void endpoint0_complete(void); void usb_init(void) { // TODO: only enable when VBUS detected // TODO: return to low power mode when VBUS removed // TODO: protect PMU access with MPU PMU_REG_3P0 = PMU_REG_3P0_OUTPUT_TRG(0x0F) | PMU_REG_3P0_BO_OFFSET(6) | PMU_REG_3P0_ENABLE_LINREG; usb_init_serialnumber(); // assume PLL3 is already running - already done by usb_pll_start() in main.c CCM_CCGR6 |= CCM_CCGR6_USBOH3(CCM_CCGR_ON); // turn on clocks to USB peripheral // Before programming this register, the PHY clocks must be enabled in registers // USBPHYx_CTRLn and CCM_ANALOG_USBPHYx_PLL_480_CTRLn. //printf("USBPHY1_PWD=%08lX\n", USBPHY1_PWD); //printf("USBPHY1_TX=%08lX\n", USBPHY1_TX); //printf("USBPHY1_RX=%08lX\n", USBPHY1_RX); //printf("USBPHY1_CTRL=%08lX\n", USBPHY1_CTRL); //printf("USB1_USBMODE=%08lX\n", USB1_USBMODE); // turn on PLL3, wait for 480 MHz lock? // turn on CCM clock gates? CCGR6[CG0] #if 1 if ((USBPHY1_PWD & (USBPHY_PWD_RXPWDRX | USBPHY_PWD_RXPWDDIFF | USBPHY_PWD_RXPWD1PT1 | USBPHY_PWD_RXPWDENV | USBPHY_PWD_TXPWDV2I | USBPHY_PWD_TXPWDIBIAS | USBPHY_PWD_TXPWDFS)) || (USB1_USBMODE & USB_USBMODE_CM_MASK)) { // USB controller is turned on from previous use // reset needed to turn it off & start from clean slate USBPHY1_CTRL_SET = USBPHY_CTRL_SFTRST; // USBPHY1_CTRL page 3292 USB1_USBCMD |= USB_USBCMD_RST; // reset controller int count=0; while (USB1_USBCMD & USB_USBCMD_RST) count++; NVIC_CLEAR_PENDING(IRQ_USB1); USBPHY1_CTRL_CLR = USBPHY_CTRL_SFTRST; // reset PHY //USB1_USBSTS = USB1_USBSTS; // TODO: is this needed? printf("USB reset took %d loops\n", count); //delay(10); //printf("\n"); //printf("USBPHY1_PWD=%08lX\n", USBPHY1_PWD); //printf("USBPHY1_TX=%08lX\n", USBPHY1_TX); //printf("USBPHY1_RX=%08lX\n", USBPHY1_RX); //printf("USBPHY1_CTRL=%08lX\n", USBPHY1_CTRL); //printf("USB1_USBMODE=%08lX\n", USB1_USBMODE); delay(100); } #endif // Device Controller Initialization, page 3161 // USBCMD pg 3216 // USBSTS pg 3220 // USBINTR pg 3224 // DEVICEADDR pg 3227 // ENDPTLISTADDR 3229 // USBMODE pg 3244 // ENDPTSETUPSTAT 3245 // ENDPTPRIME pg 3246 // ENDPTFLUSH pg 3247 // ENDPTSTAT pg 3247 // ENDPTCOMPLETE 3248 // ENDPTCTRL0 pg 3249 USBPHY1_CTRL_CLR = USBPHY_CTRL_CLKGATE; USBPHY1_PWD = 0; //printf("USBPHY1_PWD=%08lX\n", USBPHY1_PWD); //printf("USBPHY1_CTRL=%08lX\n", USBPHY1_CTRL); USB1_USBMODE = USB_USBMODE_CM(2) | USB_USBMODE_SLOM; memset(endpoint_queue_head, 0, sizeof(endpoint_queue_head)); endpoint_queue_head[0].config = (64 << 16) | (1 << 15); endpoint_queue_head[1].config = (64 << 16); USB1_ENDPOINTLISTADDR = (uint32_t)&endpoint_queue_head; // Recommended: enable all device interrupts including: USBINT, USBERRINT, // Port Change Detect, USB Reset Received, DCSuspend. USB1_USBINTR = USB_USBINTR_UE | USB_USBINTR_UEE | /* USB_USBINTR_PCE | */ USB_USBINTR_URE | USB_USBINTR_SLE; //_VectorsRam[IRQ_USB1+16] = &isr; attachInterruptVector(IRQ_USB1, &isr); NVIC_ENABLE_IRQ(IRQ_USB1); //printf("USB1_ENDPTCTRL0=%08lX\n", USB1_ENDPTCTRL0); //printf("USB1_ENDPTCTRL1=%08lX\n", USB1_ENDPTCTRL1); //printf("USB1_ENDPTCTRL2=%08lX\n", USB1_ENDPTCTRL2); //printf("USB1_ENDPTCTRL3=%08lX\n", USB1_ENDPTCTRL3); USB1_USBCMD |= USB_USBCMD_RS; } static void isr(void) { //printf("*"); // Port control in device mode is only used for // status port reset, suspend, and current connect status. uint32_t status = USB1_USBSTS; USB1_USBSTS = status; // USB_USBSTS_SLI - set to 1 when enters a suspend state from an active state // USB_USBSTS_SRI - set at start of frame // USB_USBSTS_SRI - set when USB reset detected if (status & USB_USBSTS_UI) { //printf("data\n"); uint32_t setupstatus = USB1_ENDPTSETUPSTAT; //printf("USB1_ENDPTSETUPSTAT=%X\n", setupstatus); while (setupstatus) { USB1_ENDPTSETUPSTAT = setupstatus; setup_t s; do { USB1_USBCMD |= USB_USBCMD_SUTW; s.word1 = endpoint_queue_head[0].setup0; s.word2 = endpoint_queue_head[0].setup1; } while (!(USB1_USBCMD & USB_USBCMD_SUTW)); USB1_USBCMD &= ~USB_USBCMD_SUTW; //printf("setup %08lX %08lX\n", s.word1, s.word2); USB1_ENDPTFLUSH = (1<<16) | (1<<0); // page 3174 while (USB1_ENDPTFLUSH & ((1<<16) | (1<<0))) ; endpoint0_notify_mask = 0; endpoint0_setup(s.bothwords); setupstatus = USB1_ENDPTSETUPSTAT; // page 3175 } uint32_t completestatus = USB1_ENDPTCOMPLETE; if (completestatus) { USB1_ENDPTCOMPLETE = completestatus; //printf("USB1_ENDPTCOMPLETE=%lX\n", completestatus); if (completestatus & endpoint0_notify_mask) { endpoint0_notify_mask = 0; endpoint0_complete(); } if (completestatus & endpointN_notify_mask) { // TODO: callback functions... } } } if (status & USB_USBSTS_URI) { // page 3164 USB1_ENDPTSETUPSTAT = USB1_ENDPTSETUPSTAT; // Clear all setup token semaphores USB1_ENDPTCOMPLETE = USB1_ENDPTCOMPLETE; // Clear all the endpoint complete status while (USB1_ENDPTPRIME != 0) ; // Wait for any endpoint priming USB1_ENDPTFLUSH = 0xFFFFFFFF; // Cancel all endpoint primed status if ((USB1_PORTSC1 & USB_PORTSC1_PR)) { //printf("reset\n"); } else { // we took too long to respond :( // TODO; is this ever really a problem? //printf("reset too slow\n"); } // TODO: Free all allocated dTDs //if (++reset_count >= 3) { // shut off USB - easier to see results in protocol analyzer //USB1_USBCMD &= ~USB_USBCMD_RS; //printf("shut off USB\n"); //} } if (status & USB_USBSTS_PCI) { if (USB1_PORTSC1 & USB_PORTSC1_HSP) { //printf("port at 480 Mbit\n"); } else { //printf("port at 12 Mbit\n"); } } if (status & USB_USBSTS_SLI) { // page 3165 //printf("suspend\n"); } if (status & USB_USBSTS_UEI) { //printf("error\n"); } if ((USB1_USBINTR & USB_USBINTR_SRE) && (status & USB_USBSTS_SRI)) { printf("sof %d\n", usb_reboot_timer); if (usb_reboot_timer) { if (--usb_reboot_timer == 0) { asm("bkpt #251"); // run bootloader } } else { // turn off the SOF interrupt if nothing using it USB1_USBINTR &= ~USB_USBINTR_SRE; } } } /* struct transfer_struct { // table 55-60, pg 3159 uint32_t next; uint32_t status; uint32_t pointer0; uint32_t pointer1; uint32_t pointer2; uint32_t pointer3; uint32_t pointer4; uint32_t unused1; }; transfer_t endpoint0_transfer_data __attribute__ ((aligned(32)));; transfer_t endpoint0_transfer_ack __attribute__ ((aligned(32)));; */ static void endpoint0_setup(uint64_t setupdata) { setup_t setup; uint32_t datalen = 0; const usb_descriptor_list_t *list; setup.bothwords = setupdata; switch (setup.wRequestAndType) { case 0x0500: // SET_ADDRESS endpoint0_receive(NULL, 0, 0); USB1_DEVICEADDR = USB_DEVICEADDR_USBADR(setup.wValue) | USB_DEVICEADDR_USBADRA; return; case 0x0900: // SET_CONFIGURATION usb_configuration = setup.wValue; // configure all other endpoints volatile uint32_t *reg = &USB1_ENDPTCTRL1; const uint32_t *cfg = usb_endpoint_config_table; int i; for (i=0; i < NUM_ENDPOINTS; i++) { uint32_t n = *cfg++; *reg = n; // TODO: do the TRX & RXR bits self clear?? uint32_t m = n & ~(USB_ENDPTCTRL_TXR | USB_ENDPTCTRL_RXR); *reg = m; //uint32_t p = *reg; //printf(" ep=%d: cfg=%08lX - %08lX - %08lX\n", i + 1, n, m, p); reg++; } // TODO: configure all queue heads with max packet length, zlt & mult endpoint_queue_head[CDC_ACM_ENDPOINT*2+1].config = (CDC_ACM_ENDPOINT << 16); endpoint_queue_head[CDC_RX_ENDPOINT*2+0].config = (CDC_RX_SIZE << 16) | (1 << 29); endpoint_queue_head[CDC_TX_ENDPOINT*2+1].config = (CDC_TX_SIZE << 16) | (1 << 29); // TODO: de-allocate any pending transfers? endpoint0_receive(NULL, 0, 0); return; case 0x0680: // GET_DESCRIPTOR case 0x0681: //printf("desc:\n"); // yay - sending device descriptor now works!!!! for (list = usb_descriptor_list; list->addr != NULL; list++) { if (setup.wValue == list->wValue && setup.wIndex == list->wIndex) { if ((setup.wValue >> 8) == 3) { // for string descriptors, use the descriptor's // length field, allowing runtime configured length. datalen = *(list->addr); } else { datalen = list->length; } if (datalen > setup.wLength) datalen = setup.wLength; endpoint0_transmit(list->addr, datalen, 0); return; } } break; case 0x2221: // CDC_SET_CONTROL_LINE_STATE //usb_cdc_line_rtsdtr_millis = systick_millis_count; //usb_cdc_line_rtsdtr = setup.wValue; case 0x2321: // CDC_SEND_BREAK endpoint0_receive(NULL, 0, 0); return; case 0x2021: // CDC_SET_LINE_CODING if (setup.wLength != 7) break; endpoint0_setupdata.bothwords = setupdata; endpoint0_receive(endpoint0_buffer, 7, 1); return; } USB1_ENDPTCTRL0 = 0x000010001; // stall } static void endpoint0_transmit(const void *data, uint32_t len, int notify) { //printf("tx %lu\n", len); if (len > 0) { // Executing A Transfer Descriptor, page 3182 endpoint0_transfer_data.next = 1; endpoint0_transfer_data.status = (len << 16) | (1<<7); uint32_t addr = (uint32_t)data; endpoint0_transfer_data.pointer0 = addr; // format: table 55-60, pg 3159 endpoint0_transfer_data.pointer1 = addr + 4096; endpoint0_transfer_data.pointer2 = addr + 8192; endpoint0_transfer_data.pointer3 = addr + 12288; endpoint0_transfer_data.pointer4 = addr + 16384; // Case 1: Link list is empty, page 3182 endpoint_queue_head[1].next = (uint32_t)&endpoint0_transfer_data; endpoint_queue_head[1].status = 0; USB1_ENDPTPRIME |= (1<<16); while (USB1_ENDPTPRIME) ; } endpoint0_transfer_ack.next = 1; endpoint0_transfer_ack.status = (1<<7) | (notify ? (1 << 15) : 0); endpoint0_transfer_ack.pointer0 = 0; endpoint_queue_head[0].next = (uint32_t)&endpoint0_transfer_ack; endpoint_queue_head[0].status = 0; USB1_ENDPTPRIME |= (1<<0); endpoint0_notify_mask = (notify ? (1 << 0) : 0); while (USB1_ENDPTPRIME) ; } static void endpoint0_receive(void *data, uint32_t len, int notify) { //printf("rx %lu\n", len); if (len > 0) { // Executing A Transfer Descriptor, page 3182 endpoint0_transfer_data.next = 1; endpoint0_transfer_data.status = (len << 16) | (1<<7); uint32_t addr = (uint32_t)data; endpoint0_transfer_data.pointer0 = addr; // format: table 55-60, pg 3159 endpoint0_transfer_data.pointer1 = addr + 4096; endpoint0_transfer_data.pointer2 = addr + 8192; endpoint0_transfer_data.pointer3 = addr + 12288; endpoint0_transfer_data.pointer4 = addr + 16384; // Case 1: Link list is empty, page 3182 endpoint_queue_head[0].next = (uint32_t)&endpoint0_transfer_data; endpoint_queue_head[0].status = 0; USB1_ENDPTPRIME |= (1<<0); while (USB1_ENDPTPRIME) ; } endpoint0_transfer_ack.next = 1; endpoint0_transfer_ack.status = (1<<7) | (notify ? (1 << 15) : 0); endpoint0_transfer_ack.pointer0 = 0; endpoint_queue_head[1].next = (uint32_t)&endpoint0_transfer_ack; endpoint_queue_head[1].status = 0; USB1_ENDPTPRIME |= (1<<16); endpoint0_notify_mask = (notify ? (1 << 16) : 0); while (USB1_ENDPTPRIME) ; } /*typedef union { struct { union { struct { uint8_t bmRequestType; uint8_t bRequest; }; uint16_t wRequestAndType; }; uint16_t wValue; uint16_t wIndex; uint16_t wLength; }; struct { uint32_t word1; uint32_t word2; }; uint64_t bothwords; } setup_t; */ static void endpoint0_complete(void) { setup_t setup; setup.bothwords = endpoint0_setupdata.bothwords; //printf("complete\n"); #ifdef CDC_STATUS_INTERFACE if (setup.wRequestAndType == 0x2021 /*CDC_SET_LINE_CODING*/) { memcpy(usb_cdc_line_coding, endpoint0_buffer, 7); printf("usb_cdc_line_coding, baud=%u\n", usb_cdc_line_coding[0]); if (usb_cdc_line_coding[0] == 134) { USB1_USBINTR |= USB_USBINTR_SRE; usb_reboot_timer = 80; // TODO: 10 if only 12 Mbit/sec } } #endif } void usb_prepare_transfer(transfer_t *transfer, const void *data, uint32_t len, uint32_t param) { transfer->next = 1; transfer->status = (len << 16) | (1<<7); uint32_t addr = (uint32_t)data; transfer->pointer0 = addr; transfer->pointer1 = addr + 4096; transfer->pointer2 = addr + 8192; transfer->pointer3 = addr + 12288; transfer->pointer4 = addr + 16384; transfer->callback_param = param; } void usb_transmit(int endpoint_number, transfer_t *transfer) { // endpoint 0 reserved for control // endpoint 1 reserved for debug //printf("usb_transmit %d\n", endpoint_number); if (endpoint_number < 2 || endpoint_number > NUM_ENDPOINTS) return; endpoint_t *endpoint = &endpoint_queue_head[endpoint_number * 2 + 1]; if (endpoint->callback_function) { transfer->status |= (1<<15); } else { //transfer->status |= (1<<15); // remove all inactive transfers } uint32_t mask = 1 << (endpoint_number + 16); __disable_irq(); #if 0 if (endpoint->last_transfer) { if (!(endpoint->last_transfer->status & (1<<7))) { endpoint->last_transfer->next = (uint32_t)transfer; } else { // Case 2: Link list is not empty, page 3182 endpoint->last_transfer->next = (uint32_t)transfer; if (USB1_ENDPTPRIME & mask) { endpoint->last_transfer = transfer; __enable_irq(); printf(" case 2a\n"); return; } uint32_t stat; uint32_t cmd = USB1_USBCMD; do { USB1_USBCMD = cmd | USB_USBCMD_ATDTW; stat = USB1_ENDPTSTATUS; } while (!(USB1_USBCMD & USB_USBCMD_ATDTW)); USB1_USBCMD = cmd & ~USB_USBCMD_ATDTW; if (stat & mask) { endpoint->last_transfer = transfer; __enable_irq(); printf(" case 2b\n"); return; } } } else { endpoint->first_transfer = transfer; } endpoint->last_transfer = transfer; #endif // Case 1: Link list is empty, page 3182 endpoint->next = (uint32_t)transfer; endpoint->status = 0; USB1_ENDPTPRIME |= mask; while (USB1_ENDPTPRIME & mask) ; __enable_irq(); //printf(" case 1\n"); // ENDPTPRIME - momentarily set by hardware during hardware re-priming // operations when a dTD is retired, and the dQH is updated. // ENDPTSTAT - Transmit Buffer Ready - set to one by the hardware as a // response to receiving a command from a corresponding bit // in the ENDPTPRIME register. . Buffer ready is cleared by // USB reset, by the USB DMA system, or through the ENDPTFLUSH // register. (so 0=buffer ready, 1=buffer primed for transmit) } /*struct endpoint_struct { uint32_t config; uint32_t current; uint32_t next; uint32_t status; uint32_t pointer0; uint32_t pointer1; uint32_t pointer2; uint32_t pointer3; uint32_t pointer4; uint32_t reserved; uint32_t setup0; uint32_t setup1; transfer_t *first_transfer; transfer_t *last_transfer; void (*callback_function)(transfer_t *completed_transfer); uint32_t unused1; };*/