/* Teensyduino Core Library * http://www.pjrc.com/teensy/ * Copyright (c) 2013 PJRC.COM, LLC. * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * 1. The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * 2. If the Software is incorporated into a build system that allows * selection among a list of target devices, then similar target * devices manufactured by PJRC.COM must be included in the list of * target devices and selectable in the same manner. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include "core_pins.h" #include "pins_arduino.h" #include "HardwareSerial.h" #include "IntervalTimer.h" // IntervalTimer based tone. This allows tone() to share the timers with other // libraries, rather than permanently hogging one PIT timer even for projects // which never use tone(). Someday this single-tone implementation might be // changed to allow multiple simultaneous tones. static uint32_t tone_toggle_count; static volatile uint8_t *tone_reg; static uint8_t tone_pin=255; static float tone_usec=0.0; static uint32_t tone_new_count=0; IntervalTimer tone_timer; void tone_interrupt(void); #if defined(KINETISK) #define TONE_CLEAR_PIN tone_reg[0] = 1 #define TONE_TOGGLE_PIN tone_reg[128] = 1 #define TONE_OUTPUT_PIN tone_reg[384] = 1 #elif defined(KINETISL) static uint8_t tone_mask; #define TONE_CLEAR_PIN tone_reg[0] = tone_mask #define TONE_TOGGLE_PIN tone_reg[4] = tone_mask #define TONE_OUTPUT_PIN __disable_irq(); tone_reg[12] |= tone_mask; __enable_irq() #endif void tone(uint8_t pin, uint16_t frequency, uint32_t duration) { uint32_t count; volatile uint32_t *config; float usec; if (pin >= CORE_NUM_DIGITAL) return; if (duration) { count = (frequency * duration / 1000) * 2; if (!(count & 1)) count++; // always full waveform cycles } else { count = 0xFFFFFFFD; } usec = (float)500000.0 / (float)frequency; config = portConfigRegister(pin); // TODO: IntervalTimer really needs an API to disable and enable // the interrupt on a single timer. __disable_irq(); if (pin == tone_pin) { // changing a pin which is already playing a tone if (usec == tone_usec) { // same frequency, so just change the duration tone_toggle_count = (tone_toggle_count & 1) + count - 1; } else { // different frequency, reduce duration to only the // remainder of its current cycle, and configure for // the transition to the new frequency when the // current cycle completes tone_usec = usec; tone_new_count = count; tone_toggle_count = (tone_toggle_count & 1); } } else { // if playing on a different pin, immediately stop, even mid-cycle :-( if (tone_pin < CORE_NUM_DIGITAL) { TONE_CLEAR_PIN; // clear pin } // configure the new tone to play tone_pin = pin; tone_reg = portClearRegister(pin); #if defined(KINETISL) tone_mask = digitalPinToBitMask(pin); #endif TONE_CLEAR_PIN; // clear pin TONE_OUTPUT_PIN; // output mode; *config = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); tone_toggle_count = count; tone_usec = usec; tone_timer.begin(tone_interrupt, usec); } __enable_irq(); } void tone_interrupt(void) { if (tone_toggle_count) { // odd = rising edge, even = falling edge // not the end TONE_TOGGLE_PIN; // toggle tone_toggle_count--; if (tone_toggle_count == 0xFFFFFFFB) tone_toggle_count = 0xFFFFFFFD; } else { // this transition completes the tone TONE_CLEAR_PIN; // clear if (tone_new_count > 0) { // begin playing a new tone tone_timer.begin(tone_interrupt, tone_usec); tone_toggle_count = tone_new_count; tone_new_count = 0; } else { // finished playing tone_timer.end(); tone_pin = 255; } } } void noTone(uint8_t pin) { if (pin >= CORE_NUM_DIGITAL) return; __disable_irq(); if (pin == tone_pin) { tone_timer.end(); TONE_CLEAR_PIN; // clear tone_pin = 255; } __enable_irq(); }