more teensy audio board settings

Adds more comments on how to use sd on teensy audio board

examples/CardInfo/CardInfo.ino

@@ -7,10 +7,10 @@
  	
  The circuit:
   * SD card attached to SPI bus as follows:
- ** MOSI - pin 11 on Arduino Uno/Duemilanove/Diecimila
+ ** MOSI - pin 11 on Arduino Uno/Duemilanove/Diecimila, pin 7 on Teensy with audio board
  ** MISO - pin 12 on Arduino Uno/Duemilanove/Diecimila
- ** CLK - pin 13 on Arduino Uno/Duemilanove/Diecimila
- ** CS - depends on your SD card shield or module. 
+ ** CLK - pin 13 on Arduino Uno/Duemilanove/Diecimila, pin 14 on Teensy with audio board
+ ** CS - depends on your SD card shield or module - pin 10 on Teensy with audio board
  		Pin 4 used here for consistency with other Arduino examples
 
  
@@ -40,6 +40,9 @@ const int chipSelect = 4;
 
 void setup()
 {
+  //SPI.setMOSI(7);  // Audio shield has MOSI on pin 7
+  //SPI.setSCK(14);  // Audio shield has SCK on pin 14
+  
  // Open serial communications and wait for port to open:
   Serial.begin(9600);
    while (!Serial) {

examples/Datalogger/Datalogger.ino

@@ -7,10 +7,10 @@
  The circuit:
  * analog sensors on analog ins 0, 1, and 2
  * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
+ ** MOSI - pin 11, pin 7 on Teensy with audio board
  ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
+ ** CLK - pin 13, pin 14 on Teensy with audio board
+ ** CS - pin 4,  pin 10 on Teensy with audio board
  
  created  24 Nov 2010
  modified 9 Apr 2012
@@ -40,6 +40,10 @@ const int chipSelect = 4;
 
 void setup()
 {
+  //UNCOMMENT THESE TWO LINES FOR TEENSY AUDIO BOARD:
+  //SPI.setMOSI(7);  // Audio shield has MOSI on pin 7
+  //SPI.setSCK(14);  // Audio shield has SCK on pin 14
+  
  // Open serial communications and wait for port to open:
   Serial.begin(9600);
    while (!Serial) {

examples/DumpFile/DumpFile.ino

@@ -6,10 +6,9 @@
  	
  The circuit:
  * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
+ ** MOSI - pin 11, pin 7 on Teensy with audio board
  ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
+ ** CLK - pin 13, pin 14 on Teensy with audio board
  
  created  22 December 2010
  by Limor Fried
@@ -40,6 +39,10 @@ const int chipSelect = 4;
 
 void setup()
 {
+ //UNCOMMENT THESE TWO LINES FOR TEENSY AUDIO BOARD:
+ //SPI.setMOSI(7);  // Audio shield has MOSI on pin 7
+ //SPI.setSCK(14);  // Audio shield has SCK on pin 14
+  
  // Open serial communications and wait for port to open:
   Serial.begin(9600);
    while (!Serial) {

examples/Files/Files.ino

@@ -4,10 +4,10 @@
  This example shows how to create and destroy an SD card file 	
  The circuit:
  * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
+ ** MOSI - pin 11, pin 7 on Teensy with audio board
  ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
+ ** CLK - pin 13, pin 14 on Teensy with audio board
+ ** CS - pin 4, pin 10 on Teensy with audio board
  
  created   Nov 2010
  by David A. Mellis
@@ -34,6 +34,10 @@ const int chipSelect = 4;
 
 void setup()
 {
+ //UNCOMMENT THESE TWO LINES FOR TEENSY AUDIO BOARD:
+ //SPI.setMOSI(7);  // Audio shield has MOSI on pin 7
+ //SPI.setSCK(14);  // Audio shield has SCK on pin 14
+  
  // Open serial communications and wait for port to open:
   Serial.begin(9600);
    while (!Serial) {

examples/ReadWrite/ReadWrite.ino

@@ -4,10 +4,10 @@
  This example shows how to read and write data to and from an SD card file 	
  The circuit:
  * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
+ ** MOSI - pin 11, pin 7 on Teensy with audio board
  ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
+ ** CLK - pin 13, pin 14 on Teensy with audio board
+ ** CS - pin 4, pin 10 on Teensy with audio board
  
  created   Nov 2010
  by David A. Mellis
@@ -35,6 +35,10 @@ const int chipSelect = 4;
 
 void setup()
 {
+ //UNCOMMENT THESE TWO LINES FOR TEENSY AUDIO BOARD:
+ //SPI.setMOSI(7);  // Audio shield has MOSI on pin 7
+ //SPI.setSCK(14);  // Audio shield has SCK on pin 14
+  
  // Open serial communications and wait for port to open:
   Serial.begin(9600);
    while (!Serial) {

examples/listfiles/listfiles.ino

@@ -4,10 +4,10 @@
  This example shows how to create and destroy an SD card file 	
  The circuit:
  * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
+ ** MOSI - pin 11, pin 7 on Teensy with audio board
  ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
+ ** CLK - pin 13, pin 14 on Teensy with audio board
+ ** CS - pin 4, pin 10 on Teensy with audio board
  
  created   Nov 2010
  by David A. Mellis
@@ -34,6 +34,10 @@ const int chipSelect = 4;
 
 void setup()
 {
+  //UNCOMMENT THESE TWO LINES FOR TEENSY AUDIO BOARD:
+  //SPI.setMOSI(7);  // Audio shield has MOSI on pin 7
+  //SPI.setSCK(14);  // Audio shield has SCK on pin 14  
+  
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
    while (!Serial) {