teensy-sdfat/examples/examplesV1/LongFileName/LongFileName.ino

// Example use of lfnOpenNext and open by index.
// You can use test files located in
// SdFat/examples/LongFileName/testFiles.
#include<SPI.h>
#include "SdFat.h"
#include "FreeStack.h"

// SD card chip select pin.
const uint8_t SD_CS_PIN = SS;

SdFat sd;
SdFile file;
SdFile dirFile;

// Number of files found.
uint16_t n = 0;

// Max of ten files since files are selected with a single digit.
const uint16_t nMax = 10;

// Position of file's directory entry.
uint16_t dirIndex[nMax];
//------------------------------------------------------------------------------
void setup() {
  Serial.begin(9600);
  while (!Serial) {}
  delay(1000);

  // Print the location of some test files.
  Serial.println(F("\r\n"
                   "You can use test files located in\r\n"
                   "SdFat/examples/LongFileName/testFiles"));

  // Initialize at the highest speed supported by the board that is
  // not over 50 MHz. Try a lower speed if SPI errors occur.
  if (!sd.begin(SD_CS_PIN, SD_SCK_MHZ(50))) {
    sd.initErrorHalt();
  }
  Serial.print(F("FreeStack: "));
  Serial.println(FreeStack());
  Serial.println();

  // List files in root directory.
  if (!dirFile.open("/", O_RDONLY)) {
    sd.errorHalt("open root failed");
  }
  while (n < nMax && file.openNext(&dirFile, O_RDONLY)) {

    // Skip directories and hidden files.
    if (!file.isSubDir() && !file.isHidden()) {

      // Save dirIndex of file in directory.
      dirIndex[n] = file.dirIndex();

      // Print the file number and name.
      Serial.print(n++);
      Serial.write(' ');
      file.printName(&Serial);
      Serial.println();
    }
    file.close();
  }
}
//------------------------------------------------------------------------------
void loop() {
  int c;

  // Read any existing Serial data.
  do {
    delay(10);
  } while (Serial.available() && Serial.read() >= 0);
  Serial.print(F("\r\nEnter File Number: "));

  while (!Serial.available()) {
    SysCall::yield();
  }
  c = Serial.read();
  uint8_t i = c - '0';
  if (!isdigit(c) || i >= n) {
    Serial.println(F("Invald number"));
    return;
  }
  Serial.println(i);
  if (!file.open(&dirFile, dirIndex[i], O_RDONLY)) {
    sd.errorHalt(F("open"));
  }
  Serial.println();

  char last = 0;

  // Copy up to 500 characters to Serial.
  for (int k = 0; k < 500 && (c = file.read()) > 0; k++)  {
    Serial.write(last = (char)c);
  }
  // Add new line if missing from last line.
  if (last != '\n') {
    Serial.println();
  }
  file.close();
  Serial.flush();
  delay(100);
}