/* * Copyright (c) 2010 by Cristian Maglie * SPI Master library for arduino. * * This file is free software; you can redistribute it and/or modify * it under the terms of either the GNU General Public License version 2 * or the GNU Lesser General Public License version 2.1, both as * published by the Free Software Foundation. */ #include "SPI.h" #include "pins_arduino.h" /**********************************************************/ /* 8 bit AVR-based boards */ /**********************************************************/ #if defined(__AVR__) SPIClass SPI; uint8_t SPIClass::interruptMode = 0; uint8_t SPIClass::interruptMask = 0; uint8_t SPIClass::interruptSave = 0; #ifdef SPI_TRANSACTION_MISMATCH_LED uint8_t SPIClass::inTransactionFlag = 0; #endif void SPIClass::begin() { // Set SS to high so a connected chip will be "deselected" by default digitalWrite(SS, HIGH); // When the SS pin is set as OUTPUT, it can be used as // a general purpose output port (it doesn't influence // SPI operations). pinMode(SS, OUTPUT); // Warning: if the SS pin ever becomes a LOW INPUT then SPI // automatically switches to Slave, so the data direction of // the SS pin MUST be kept as OUTPUT. SPCR |= _BV(MSTR); SPCR |= _BV(SPE); // Set direction register for SCK and MOSI pin. // MISO pin automatically overrides to INPUT. // By doing this AFTER enabling SPI, we avoid accidentally // clocking in a single bit since the lines go directly // from "input" to SPI control. // http://code.google.com/p/arduino/issues/detail?id=888 pinMode(SCK, OUTPUT); pinMode(MOSI, OUTPUT); } void SPIClass::end() { SPCR &= ~_BV(SPE); } // mapping of interrupt numbers to bits within SPI_AVR_EIMSK #if defined(__AVR_ATmega32U4__) #define SPI_INT0_MASK (1< 1) return; stmp = SREG; noInterrupts(); switch (interruptNumber) { #ifdef SPI_INT0_MASK case 0: mask = SPI_INT0_MASK; break; #endif #ifdef SPI_INT1_MASK case 1: mask = SPI_INT1_MASK; break; #endif #ifdef SPI_INT2_MASK case 2: mask = SPI_INT2_MASK; break; #endif #ifdef SPI_INT3_MASK case 3: mask = SPI_INT3_MASK; break; #endif #ifdef SPI_INT4_MASK case 4: mask = SPI_INT4_MASK; break; #endif #ifdef SPI_INT5_MASK case 5: mask = SPI_INT5_MASK; break; #endif #ifdef SPI_INT6_MASK case 6: mask = SPI_INT6_MASK; break; #endif #ifdef SPI_INT7_MASK case 7: mask = SPI_INT7_MASK; break; #endif default: interruptMode = 2; SREG = stmp; return; } interruptMode = 1; interruptMask |= mask; SREG = stmp; } /**********************************************************/ /* 32 bit Teensy 3.0 and 3.1 */ /**********************************************************/ #elif defined(__arm__) && defined(TEENSYDUINO) && defined(KINETISK) SPIClass SPI; uint8_t SPIClass::interruptMasksUsed = 0; uint32_t SPIClass::interruptMask[(NVIC_NUM_INTERRUPTS+31)/32]; uint32_t SPIClass::interruptSave[(NVIC_NUM_INTERRUPTS+31)/32]; #ifdef SPI_TRANSACTION_MISMATCH_LED uint8_t SPIClass::inTransactionFlag = 0; #endif void SPIClass::begin() { SIM_SCGC6 |= SIM_SCGC6_SPI0; SPI0_MCR = SPI_MCR_MDIS | SPI_MCR_HALT | SPI_MCR_PCSIS(0x1F); SPI0_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(0) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1); SPI0_CTAR1 = SPI_CTAR_FMSZ(15) | SPI_CTAR_PBR(0) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1); SPI0_MCR = SPI_MCR_MSTR | SPI_MCR_PCSIS(0x1F); SPCR.enable_pins(); // pins managed by SPCRemulation in avr_emulation.h } void SPIClass::end() { SPCR.disable_pins(); SPI0_MCR = SPI_MCR_MDIS | SPI_MCR_HALT | SPI_MCR_PCSIS(0x1F); } void SPIClass::usingInterrupt(IRQ_NUMBER_t interruptName) { uint32_t n = (uint32_t)interruptName; if (n >= NVIC_NUM_INTERRUPTS) return; //Serial.print("usingInterrupt "); //Serial.println(n); interruptMasksUsed |= (1 << (n >> 5)); interruptMask[n >> 5] |= (1 << (n & 0x1F)); //Serial.printf("interruptMasksUsed = %d\n", interruptMasksUsed); //Serial.printf("interruptMask[0] = %08X\n", interruptMask[0]); //Serial.printf("interruptMask[1] = %08X\n", interruptMask[1]); //Serial.printf("interruptMask[2] = %08X\n", interruptMask[2]); } void SPIClass::notUsingInterrupt(IRQ_NUMBER_t interruptName) { uint32_t n = (uint32_t)interruptName; if (n >= NVIC_NUM_INTERRUPTS) return; interruptMask[n >> 5] &= ~(1 << (n & 0x1F)); if (interruptMask[n >> 5] == 0) { interruptMasksUsed &= ~(1 << (n >> 5)); } } const uint16_t SPISettings::ctar_div_table[23] = { 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 32, 40, 56, 64, 96, 128, 192, 256, 384, 512, 640, 768 }; const uint32_t SPISettings::ctar_clock_table[23] = { SPI_CTAR_PBR(0) | SPI_CTAR_BR(0) | SPI_CTAR_DBR | SPI_CTAR_CSSCK(0), SPI_CTAR_PBR(1) | SPI_CTAR_BR(0) | SPI_CTAR_DBR | SPI_CTAR_CSSCK(0), SPI_CTAR_PBR(0) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0), SPI_CTAR_PBR(2) | SPI_CTAR_BR(0) | SPI_CTAR_DBR | SPI_CTAR_CSSCK(0), SPI_CTAR_PBR(1) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0), SPI_CTAR_PBR(0) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1), SPI_CTAR_PBR(2) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0), SPI_CTAR_PBR(1) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1), SPI_CTAR_PBR(0) | SPI_CTAR_BR(3) | SPI_CTAR_CSSCK(2), SPI_CTAR_PBR(2) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(0), SPI_CTAR_PBR(1) | SPI_CTAR_BR(3) | SPI_CTAR_CSSCK(2), SPI_CTAR_PBR(0) | SPI_CTAR_BR(4) | SPI_CTAR_CSSCK(3), SPI_CTAR_PBR(2) | SPI_CTAR_BR(3) | SPI_CTAR_CSSCK(2), SPI_CTAR_PBR(3) | SPI_CTAR_BR(3) | SPI_CTAR_CSSCK(2), SPI_CTAR_PBR(0) | SPI_CTAR_BR(5) | SPI_CTAR_CSSCK(4), SPI_CTAR_PBR(1) | SPI_CTAR_BR(5) | SPI_CTAR_CSSCK(4), SPI_CTAR_PBR(0) | SPI_CTAR_BR(6) | SPI_CTAR_CSSCK(5), SPI_CTAR_PBR(1) | SPI_CTAR_BR(6) | SPI_CTAR_CSSCK(5), SPI_CTAR_PBR(0) | SPI_CTAR_BR(7) | SPI_CTAR_CSSCK(6), SPI_CTAR_PBR(1) | SPI_CTAR_BR(7) | SPI_CTAR_CSSCK(6), SPI_CTAR_PBR(0) | SPI_CTAR_BR(8) | SPI_CTAR_CSSCK(7), SPI_CTAR_PBR(2) | SPI_CTAR_BR(7) | SPI_CTAR_CSSCK(6), SPI_CTAR_PBR(1) | SPI_CTAR_BR(8) | SPI_CTAR_CSSCK(7) }; static void updateCTAR(uint32_t ctar) { if (SPI0_CTAR0 != ctar) { uint32_t mcr = SPI0_MCR; if (mcr & SPI_MCR_MDIS) { SPI0_CTAR0 = ctar; SPI0_CTAR1 = ctar | SPI_CTAR_FMSZ(8); } else { SPI0_MCR = SPI_MCR_MDIS | SPI_MCR_HALT | SPI_MCR_PCSIS(0x1F); SPI0_CTAR0 = ctar; SPI0_CTAR1 = ctar | SPI_CTAR_FMSZ(8); SPI0_MCR = mcr; } } } void SPIClass::setBitOrder(uint8_t bitOrder) { SIM_SCGC6 |= SIM_SCGC6_SPI0; uint32_t ctar = SPI0_CTAR0; if (bitOrder == LSBFIRST) { ctar |= SPI_CTAR_LSBFE; } else { ctar &= ~SPI_CTAR_LSBFE; } updateCTAR(ctar); } void SPIClass::setDataMode(uint8_t dataMode) { SIM_SCGC6 |= SIM_SCGC6_SPI0; // TODO: implement with native code SPCR = (SPCR & ~SPI_MODE_MASK) | dataMode; } void SPIClass::setClockDivider_noInline(uint32_t clk) { SIM_SCGC6 |= SIM_SCGC6_SPI0; uint32_t ctar = SPI0_CTAR0; ctar &= (SPI_CTAR_CPOL | SPI_CTAR_CPHA | SPI_CTAR_LSBFE); if (ctar & SPI_CTAR_CPHA) { clk = (clk & 0xFFFF0FFF) | ((clk & 0xF000) >> 4); } ctar |= clk; updateCTAR(ctar); } bool SPIClass::pinIsChipSelect(uint8_t pin) { if (pin == 10 || pin == 9 || pin == 6 || pin == 2 || pin == 15) return true; if (pin >= 20 && pin <= 23) return true; return false; } bool SPIClass::pinIsChipSelect(uint8_t pin1, uint8_t pin2) { if (!pinIsChipSelect(pin1) || !pinIsChipSelect(pin2)) return false; if ((pin1 == 2 && pin2 == 10) || (pin1 == 10 && pin2 == 2)) return false; if ((pin1 == 6 && pin2 == 9) || (pin1 == 9 && pin2 == 6)) return false; if ((pin1 == 20 && pin2 == 23) || (pin1 == 23 && pin2 == 20)) return false; if ((pin1 == 21 && pin2 == 22) || (pin1 == 22 && pin2 == 21)) return false; return true; } uint8_t SPIClass::setCS(uint8_t pin) { switch (pin) { case 10: CORE_PIN10_CONFIG = PORT_PCR_MUX(2); return 0x01; // PTC4 case 2: CORE_PIN2_CONFIG = PORT_PCR_MUX(2); return 0x01; // PTD0 case 9: CORE_PIN9_CONFIG = PORT_PCR_MUX(2); return 0x02; // PTC3 case 6: CORE_PIN6_CONFIG = PORT_PCR_MUX(2); return 0x02; // PTD4 case 20: CORE_PIN20_CONFIG = PORT_PCR_MUX(2); return 0x04; // PTD5 case 23: CORE_PIN23_CONFIG = PORT_PCR_MUX(2); return 0x04; // PTC2 case 21: CORE_PIN21_CONFIG = PORT_PCR_MUX(2); return 0x08; // PTD6 case 22: CORE_PIN22_CONFIG = PORT_PCR_MUX(2); return 0x08; // PTC1 case 15: CORE_PIN15_CONFIG = PORT_PCR_MUX(2); return 0x10; // PTC0 } return 0; } /**********************************************************/ /* 32 bit Teensy-3.4/3.5 */ /**********************************************************/ #if defined(__MK64FX512__) || defined(__MK66FX1M0__) SPI1Class SPI1; uint8_t SPI1Class::interruptMasksUsed = 0; uint32_t SPI1Class::interruptMask[(NVIC_NUM_INTERRUPTS+31)/32]; uint32_t SPI1Class::interruptSave[(NVIC_NUM_INTERRUPTS+31)/32]; #ifdef SPI_TRANSACTION_MISMATCH_LED uint8_t SPI1Class::inTransactionFlag = 0; #endif void SPI1Class::begin() { SIM_SCGC6 |= SIM_SCGC6_SPI1; SPI1_MCR = SPI_MCR_MDIS | SPI_MCR_HALT | SPI_MCR_PCSIS(0x1F); SPI1_CTAR0 = SPI_CTAR_FMSZ(7) | SPI_CTAR_PBR(0) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1); SPI1_CTAR1 = SPI_CTAR_FMSZ(15) | SPI_CTAR_PBR(0) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1); SPI1_MCR = SPI_MCR_MSTR | SPI_MCR_PCSIS(0x1F); SPCR1.enable_pins(); // pins managed by SPCRemulation in avr_emulation.h } void SPI1Class::end() { SPCR1.disable_pins(); SPI1_MCR = SPI_MCR_MDIS | SPI_MCR_HALT | SPI_MCR_PCSIS(0x1F); } void SPI1Class::usingInterrupt(IRQ_NUMBER_t interruptName) { uint32_t n = (uint32_t)interruptName; if (n >= NVIC_NUM_INTERRUPTS) return; //Serial.print("usingInterrupt "); //Serial.println(n); interruptMasksUsed |= (1 << (n >> 5)); interruptMask[n >> 5] |= (1 << (n & 0x1F)); //Serial.printf("interruptMasksUsed = %d\n", interruptMasksUsed); //Serial.printf("interruptMask[0] = %08X\n", interruptMask[0]); //Serial.printf("interruptMask[1] = %08X\n", interruptMask[1]); //Serial.printf("interruptMask[2] = %08X\n", interruptMask[2]); } void SPI1Class::notUsingInterrupt(IRQ_NUMBER_t interruptName) { uint32_t n = (uint32_t)interruptName; if (n >= NVIC_NUM_INTERRUPTS) return; interruptMask[n >> 5] &= ~(1 << (n & 0x1F)); if (interruptMask[n >> 5] == 0) { interruptMasksUsed &= ~(1 << (n >> 5)); } } static void updateCTAR1(uint32_t ctar) { if (SPI1_CTAR0 != ctar) { uint32_t mcr = SPI1_MCR; if (mcr & SPI_MCR_MDIS) { SPI1_CTAR0 = ctar; SPI1_CTAR1 = ctar | SPI_CTAR_FMSZ(8); } else { SPI1_MCR = SPI_MCR_MDIS | SPI_MCR_HALT | SPI_MCR_PCSIS(0x1F); SPI1_CTAR0 = ctar; SPI1_CTAR1 = ctar | SPI_CTAR_FMSZ(8); SPI1_MCR = mcr; } } } void SPI1Class::setBitOrder(uint8_t bitOrder) { SIM_SCGC6 |= SIM_SCGC6_SPI1; uint32_t ctar = SPI1_CTAR0; if (bitOrder == LSBFIRST) { ctar |= SPI_CTAR_LSBFE; } else { ctar &= ~SPI_CTAR_LSBFE; } updateCTAR1(ctar); } void SPI1Class::setDataMode(uint8_t dataMode) { SIM_SCGC6 |= SIM_SCGC6_SPI1; // TODO: implement with native code SPCR = (SPCR & ~SPI_MODE_MASK) | dataMode; } void SPI1Class::setClockDivider_noInline(uint32_t clk) { SIM_SCGC6 |= SIM_SCGC6_SPI1; uint32_t ctar = SPI1_CTAR0; ctar &= (SPI_CTAR_CPOL | SPI_CTAR_CPHA | SPI_CTAR_LSBFE); if (ctar & SPI_CTAR_CPHA) { clk = (clk & 0xFFFF0FFF) | ((clk & 0xF000) >> 4); } ctar |= clk; updateCTAR1(ctar); } bool SPI1Class::pinIsChipSelect(uint8_t pin) { if (pin == 6 || pin == 31) return true; return false; } bool SPI1Class::pinIsChipSelect(uint8_t pin1, uint8_t pin2) { return false; // only one CS bith 6 and 31 or logially the same. } uint8_t SPI1Class::setCS(uint8_t pin) { switch (pin) { case 6: CORE_PIN6_CONFIG = PORT_PCR_MUX(7); return 0x01; // PTD4 case 31: CORE_PIN31_CONFIG = PORT_PCR_MUX(2); return 0x01; // PTD5 } return 0; } #endif /**********************************************************/ /* 32 bit Teensy-LC */ /**********************************************************/ #elif defined(__arm__) && defined(TEENSYDUINO) && defined(KINETISL) SPIClass SPI; SPI1Class SPI1; uint32_t SPIClass::interruptMask = 0; uint32_t SPIClass::interruptSave = 0; uint32_t SPI1Class::interruptMask = 0; uint32_t SPI1Class::interruptSave = 0; #ifdef SPI_TRANSACTION_MISMATCH_LED uint8_t SPIClass::inTransactionFlag = 0; uint8_t SPI1Class::inTransactionFlag = 0; #endif void SPIClass::begin() { SIM_SCGC4 |= SIM_SCGC4_SPI0; SPI0_C1 = SPI_C1_SPE | SPI_C1_MSTR; SPI0_C2 = 0; uint8_t tmp __attribute__((unused)) = SPI0_S; SPCR.enable_pins(); // pins managed by SPCRemulation in avr_emulation.h } void SPIClass::end() { SPCR.disable_pins(); SPI0_C1 = 0; } const uint16_t SPISettings::br_div_table[30] = { 2, 4, 6, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320, 384, 448, 512, 640, 768, }; const uint8_t SPISettings::br_clock_table[30] = { SPI_BR_SPPR(0) | SPI_BR_SPR(0), SPI_BR_SPPR(1) | SPI_BR_SPR(0), SPI_BR_SPPR(2) | SPI_BR_SPR(0), SPI_BR_SPPR(3) | SPI_BR_SPR(0), SPI_BR_SPPR(4) | SPI_BR_SPR(0), SPI_BR_SPPR(5) | SPI_BR_SPR(0), SPI_BR_SPPR(6) | SPI_BR_SPR(0), SPI_BR_SPPR(7) | SPI_BR_SPR(0), SPI_BR_SPPR(4) | SPI_BR_SPR(1), SPI_BR_SPPR(5) | SPI_BR_SPR(1), SPI_BR_SPPR(6) | SPI_BR_SPR(1), SPI_BR_SPPR(7) | SPI_BR_SPR(1), SPI_BR_SPPR(4) | SPI_BR_SPR(2), SPI_BR_SPPR(5) | SPI_BR_SPR(2), SPI_BR_SPPR(6) | SPI_BR_SPR(2), SPI_BR_SPPR(7) | SPI_BR_SPR(2), SPI_BR_SPPR(4) | SPI_BR_SPR(3), SPI_BR_SPPR(5) | SPI_BR_SPR(3), SPI_BR_SPPR(6) | SPI_BR_SPR(3), SPI_BR_SPPR(7) | SPI_BR_SPR(3), SPI_BR_SPPR(4) | SPI_BR_SPR(4), SPI_BR_SPPR(5) | SPI_BR_SPR(4), SPI_BR_SPPR(6) | SPI_BR_SPR(4), SPI_BR_SPPR(7) | SPI_BR_SPR(4), SPI_BR_SPPR(4) | SPI_BR_SPR(5), SPI_BR_SPPR(5) | SPI_BR_SPR(5), SPI_BR_SPPR(6) | SPI_BR_SPR(5), SPI_BR_SPPR(7) | SPI_BR_SPR(5), SPI_BR_SPPR(4) | SPI_BR_SPR(6), SPI_BR_SPPR(5) | SPI_BR_SPR(6) }; uint8_t SPIClass::setCS(uint8_t pin) { switch (pin) { case 10: CORE_PIN10_CONFIG = PORT_PCR_MUX(2); return 0x01; // PTC4 case 2: CORE_PIN2_CONFIG = PORT_PCR_MUX(2); return 0x01; // PTD0 } return 0; } void SPI1Class::begin() { SIM_SCGC4 |= SIM_SCGC4_SPI1; SPI1_C1 = SPI_C1_SPE | SPI_C1_MSTR; SPI1_C2 = 0; uint8_t tmp __attribute__((unused)) = SPI1_S; SPCR1.enable_pins(); // pins managed by SPCRemulation in avr_emulation.h } void SPI1Class::end() { SPCR1.disable_pins(); SPI1_C1 = 0; } uint8_t SPI1Class::setCS(uint8_t pin) { switch (pin) { case 6: CORE_PIN6_CONFIG = PORT_PCR_MUX(2); return 0x01; // PTD4 } return 0; } /**********************************************************/ /* 32 bit Arduino Due */ /**********************************************************/ #elif defined(__arm__) && defined(__SAM3X8E__) #include "SPI.h" SPIClass::SPIClass(Spi *_spi, uint32_t _id, void(*_initCb)(void)) : spi(_spi), id(_id), initCb(_initCb), initialized(false) { // Empty } void SPIClass::begin() { init(); // NPCS control is left to the user // Default speed set to 4Mhz setClockDivider(BOARD_SPI_DEFAULT_SS, 21); setDataMode(BOARD_SPI_DEFAULT_SS, SPI_MODE0); setBitOrder(BOARD_SPI_DEFAULT_SS, MSBFIRST); } void SPIClass::begin(uint8_t _pin) { init(); uint32_t spiPin = BOARD_PIN_TO_SPI_PIN(_pin); PIO_Configure( g_APinDescription[spiPin].pPort, g_APinDescription[spiPin].ulPinType, g_APinDescription[spiPin].ulPin, g_APinDescription[spiPin].ulPinConfiguration); // Default speed set to 4Mhz setClockDivider(_pin, 21); setDataMode(_pin, SPI_MODE0); setBitOrder(_pin, MSBFIRST); } void SPIClass::init() { if (initialized) return; interruptMode = 0; interruptMask = 0; interruptSave = 0; initCb(); SPI_Configure(spi, id, SPI_MR_MSTR | SPI_MR_PS | SPI_MR_MODFDIS); SPI_Enable(spi); initialized = true; } #ifndef interruptsStatus #define interruptsStatus() __interruptsStatus() static inline unsigned char __interruptsStatus(void) __attribute__((always_inline, unused)); static inline unsigned char __interruptsStatus(void) { unsigned int primask; asm volatile ("mrs %0, primask" : "=r" (primask)); if (primask) return 0; return 1; } #endif void SPIClass::usingInterrupt(uint8_t interruptNumber) { uint8_t irestore; irestore = interruptsStatus(); noInterrupts(); if (interruptMode < 2) { if (interruptNumber > NUM_DIGITAL_PINS) { interruptMode = 2; } else { uint8_t imask = interruptMask; Pio *pio = g_APinDescription[interruptNumber].pPort; if (pio == PIOA) { imask |= 1; } else if (pio == PIOB) { imask |= 2; } else if (pio == PIOC) { imask |= 4; } else if (pio == PIOD) { imask |= 8; } interruptMask = imask; interruptMode = 1; } } if (irestore) interrupts(); } void SPIClass::beginTransaction(uint8_t pin, SPISettings settings) { if (interruptMode > 0) { if (interruptMode == 1) { uint8_t imask = interruptMask; if (imask & 1) NVIC_DisableIRQ(PIOA_IRQn); if (imask & 2) NVIC_DisableIRQ(PIOB_IRQn); if (imask & 4) NVIC_DisableIRQ(PIOC_IRQn); if (imask & 8) NVIC_DisableIRQ(PIOD_IRQn); } else { interruptSave = interruptsStatus(); noInterrupts(); } } uint32_t ch = BOARD_PIN_TO_SPI_CHANNEL(pin); bitOrder[ch] = settings.border; SPI_ConfigureNPCS(spi, ch, settings.config); } void SPIClass::endTransaction(void) { if (interruptMode > 0) { if (interruptMode == 1) { uint8_t imask = interruptMask; if (imask & 1) NVIC_EnableIRQ(PIOA_IRQn); if (imask & 2) NVIC_EnableIRQ(PIOB_IRQn); if (imask & 4) NVIC_EnableIRQ(PIOC_IRQn); if (imask & 8) NVIC_EnableIRQ(PIOD_IRQn); } else { if (interruptSave) interrupts(); } } } void SPIClass::end(uint8_t _pin) { uint32_t spiPin = BOARD_PIN_TO_SPI_PIN(_pin); // Setting the pin as INPUT will disconnect it from SPI peripheral pinMode(spiPin, INPUT); } void SPIClass::end() { SPI_Disable(spi); initialized = false; } void SPIClass::setBitOrder(uint8_t _pin, BitOrder _bitOrder) { uint32_t ch = BOARD_PIN_TO_SPI_CHANNEL(_pin); bitOrder[ch] = _bitOrder; } void SPIClass::setDataMode(uint8_t _pin, uint8_t _mode) { uint32_t ch = BOARD_PIN_TO_SPI_CHANNEL(_pin); mode[ch] = _mode | SPI_CSR_CSAAT; // SPI_CSR_DLYBCT(1) keeps CS enabled for 32 MCLK after a completed // transfer. Some device needs that for working properly. SPI_ConfigureNPCS(spi, ch, mode[ch] | SPI_CSR_SCBR(divider[ch]) | SPI_CSR_DLYBCT(1)); } void SPIClass::setClockDivider(uint8_t _pin, uint8_t _divider) { uint32_t ch = BOARD_PIN_TO_SPI_CHANNEL(_pin); divider[ch] = _divider; // SPI_CSR_DLYBCT(1) keeps CS enabled for 32 MCLK after a completed // transfer. Some device needs that for working properly. SPI_ConfigureNPCS(spi, ch, mode[ch] | SPI_CSR_SCBR(divider[ch]) | SPI_CSR_DLYBCT(1)); } byte SPIClass::transfer(byte _pin, uint8_t _data, SPITransferMode _mode) { uint32_t ch = BOARD_PIN_TO_SPI_CHANNEL(_pin); // Reverse bit order if (bitOrder[ch] == LSBFIRST) _data = __REV(__RBIT(_data)); uint32_t d = _data | SPI_PCS(ch); if (_mode == SPI_LAST) d |= SPI_TDR_LASTXFER; // SPI_Write(spi, _channel, _data); while ((spi->SPI_SR & SPI_SR_TDRE) == 0) ; spi->SPI_TDR = d; // return SPI_Read(spi); while ((spi->SPI_SR & SPI_SR_RDRF) == 0) ; d = spi->SPI_RDR; // Reverse bit order if (bitOrder[ch] == LSBFIRST) d = __REV(__RBIT(d)); return d & 0xFF; } void SPIClass::attachInterrupt(void) { // Should be enableInterrupt() } void SPIClass::detachInterrupt(void) { // Should be disableInterrupt() } #if SPI_INTERFACES_COUNT > 0 static void SPI_0_Init(void) { PIO_Configure( g_APinDescription[PIN_SPI_MOSI].pPort, g_APinDescription[PIN_SPI_MOSI].ulPinType, g_APinDescription[PIN_SPI_MOSI].ulPin, g_APinDescription[PIN_SPI_MOSI].ulPinConfiguration); PIO_Configure( g_APinDescription[PIN_SPI_MISO].pPort, g_APinDescription[PIN_SPI_MISO].ulPinType, g_APinDescription[PIN_SPI_MISO].ulPin, g_APinDescription[PIN_SPI_MISO].ulPinConfiguration); PIO_Configure( g_APinDescription[PIN_SPI_SCK].pPort, g_APinDescription[PIN_SPI_SCK].ulPinType, g_APinDescription[PIN_SPI_SCK].ulPin, g_APinDescription[PIN_SPI_SCK].ulPinConfiguration); } SPIClass SPI(SPI_INTERFACE, SPI_INTERFACE_ID, SPI_0_Init); #endif #endif