/* * Copyright (c) 2010 by Cristian Maglie * Copyright (c) 2014 by Paul Stoffregen (Transaction API) * Copyright (c) 2014 by Matthijs Kooijman (SPISettings AVR) * SPI Master library for arduino. * * This file is free software; you can redistribute it and/or modify * it under the terms of either the GNU General Public License version 2 * or the GNU Lesser General Public License version 2.1, both as * published by the Free Software Foundation. */ #ifndef _SPI_H_INCLUDED #define _SPI_H_INCLUDED #include #if defined(__arm__) && defined(TEENSYDUINO) #if defined(__has_include) && __has_include() // SPI_HAS_TRANSFER_ASYNC - Defined to say that the SPI supports an ASYNC version // of the SPI_HAS_TRANSFER_BUF #define SPI_HAS_TRANSFER_ASYNC 1 #include #include #endif #endif // SPI_HAS_TRANSACTION means SPI has beginTransaction(), endTransaction(), // usingInterrupt(), and SPISetting(clock, bitOrder, dataMode) #define SPI_HAS_TRANSACTION 1 // Uncomment this line to add detection of mismatched begin/end transactions. // A mismatch occurs if other libraries fail to use SPI.endTransaction() for // each SPI.beginTransaction(). Connect a LED to this pin. The LED will turn // on if any mismatch is ever detected. //#define SPI_TRANSACTION_MISMATCH_LED 5 // SPI_HAS_TRANSFER_BUF - is defined to signify that this library supports // a version of transfer which allows you to pass in both TX and RX buffer // pointers, either of which could be NULL #define SPI_HAS_TRANSFER_BUF 1 #ifndef LSBFIRST #define LSBFIRST 0 #endif #ifndef MSBFIRST #define MSBFIRST 1 #endif #define SPI_MODE0 0x00 #define SPI_MODE1 0x04 #define SPI_MODE2 0x08 #define SPI_MODE3 0x0C #define SPI_CLOCK_DIV4 0x00 #define SPI_CLOCK_DIV16 0x01 #define SPI_CLOCK_DIV64 0x02 #define SPI_CLOCK_DIV128 0x03 #define SPI_CLOCK_DIV2 0x04 #define SPI_CLOCK_DIV8 0x05 #define SPI_CLOCK_DIV32 0x06 #define SPI_MODE_MASK 0x0C // CPOL = bit 3, CPHA = bit 2 on SPCR #define SPI_CLOCK_MASK 0x03 // SPR1 = bit 1, SPR0 = bit 0 on SPCR #define SPI_2XCLOCK_MASK 0x01 // SPI2X = bit 0 on SPSR /**********************************************************/ /* 8 bit AVR-based boards */ /**********************************************************/ #if defined(__AVR__) #define SPI_ATOMIC_VERSION 1 // define SPI_AVR_EIMSK for AVR boards with external interrupt pins #if defined(EIMSK) #define SPI_AVR_EIMSK EIMSK #elif defined(GICR) #define SPI_AVR_EIMSK GICR #elif defined(GIMSK) #define SPI_AVR_EIMSK GIMSK #endif class SPISettings { public: SPISettings(uint32_t clock, uint8_t bitOrder, uint8_t dataMode) { if (__builtin_constant_p(clock)) { init_AlwaysInline(clock, bitOrder, dataMode); } else { init_MightInline(clock, bitOrder, dataMode); } } SPISettings() { init_AlwaysInline(4000000, MSBFIRST, SPI_MODE0); } private: void init_MightInline(uint32_t clock, uint8_t bitOrder, uint8_t dataMode) { init_AlwaysInline(clock, bitOrder, dataMode); } void init_AlwaysInline(uint32_t clock, uint8_t bitOrder, uint8_t dataMode) __attribute__((__always_inline__)) { // Clock settings are defined as follows. Note that this shows SPI2X // inverted, so the bits form increasing numbers. Also note that // fosc/64 appears twice // SPR1 SPR0 ~SPI2X Freq // 0 0 0 fosc/2 // 0 0 1 fosc/4 // 0 1 0 fosc/8 // 0 1 1 fosc/16 // 1 0 0 fosc/32 // 1 0 1 fosc/64 // 1 1 0 fosc/64 // 1 1 1 fosc/128 // We find the fastest clock that is less than or equal to the // given clock rate. The clock divider that results in clock_setting // is 2 ^^ (clock_div + 1). If nothing is slow enough, we'll use the // slowest (128 == 2 ^^ 7, so clock_div = 6). uint8_t clockDiv; // When the clock is known at compiletime, use this if-then-else // cascade, which the compiler knows how to completely optimize // away. When clock is not known, use a loop instead, which generates // shorter code. if (__builtin_constant_p(clock)) { if (clock >= F_CPU / 2) { clockDiv = 0; } else if (clock >= F_CPU / 4) { clockDiv = 1; } else if (clock >= F_CPU / 8) { clockDiv = 2; } else if (clock >= F_CPU / 16) { clockDiv = 3; } else if (clock >= F_CPU / 32) { clockDiv = 4; } else if (clock >= F_CPU / 64) { clockDiv = 5; } else { clockDiv = 6; } } else { uint32_t clockSetting = F_CPU / 2; clockDiv = 0; while (clockDiv < 6 && clock < clockSetting) { clockSetting /= 2; clockDiv++; } } // Compensate for the duplicate fosc/64 if (clockDiv == 6) clockDiv = 7; // Invert the SPI2X bit clockDiv ^= 0x1; // Pack into the SPISettings class spcr = _BV(SPE) | _BV(MSTR) | ((bitOrder == LSBFIRST) ? _BV(DORD) : 0) | (dataMode & SPI_MODE_MASK) | ((clockDiv >> 1) & SPI_CLOCK_MASK); spsr = clockDiv & SPI_2XCLOCK_MASK; } uint8_t spcr; uint8_t spsr; friend class SPIClass; }; class SPIClass { // AVR public: // Initialize the SPI library static void begin(); // If SPI is used from within an interrupt, this function registers // that interrupt with the SPI library, so beginTransaction() can // prevent conflicts. The input interruptNumber is the number used // with attachInterrupt. If SPI is used from a different interrupt // (eg, a timer), interruptNumber should be 255. static void usingInterrupt(uint8_t interruptNumber); // Before using SPI.transfer() or asserting chip select pins, // this function is used to gain exclusive access to the SPI bus // and configure the correct settings. inline static void beginTransaction(SPISettings settings) { if (interruptMode > 0) { #ifdef SPI_AVR_EIMSK if (interruptMode == 1) { interruptSave = SPI_AVR_EIMSK; SPI_AVR_EIMSK &= ~interruptMask; } else #endif { uint8_t tmp = SREG; cli(); interruptSave = tmp; } } #ifdef SPI_TRANSACTION_MISMATCH_LED if (inTransactionFlag) { pinMode(SPI_TRANSACTION_MISMATCH_LED, OUTPUT); digitalWrite(SPI_TRANSACTION_MISMATCH_LED, HIGH); } inTransactionFlag = 1; #endif SPCR = settings.spcr; SPSR = settings.spsr; } // Write to the SPI bus (MOSI pin) and also receive (MISO pin) inline static uint8_t transfer(uint8_t data) { SPDR = data; asm volatile("nop"); while (!(SPSR & _BV(SPIF))) ; // wait return SPDR; } inline static uint16_t transfer16(uint16_t data) { union { uint16_t val; struct { uint8_t lsb; uint8_t msb; }; } in, out; in.val = data; if ((SPCR & _BV(DORD))) { SPDR = in.lsb; asm volatile("nop"); while (!(SPSR & _BV(SPIF))) ; out.lsb = SPDR; SPDR = in.msb; asm volatile("nop"); while (!(SPSR & _BV(SPIF))) ; out.msb = SPDR; } else { SPDR = in.msb; asm volatile("nop"); while (!(SPSR & _BV(SPIF))) ; out.msb = SPDR; SPDR = in.lsb; asm volatile("nop"); while (!(SPSR & _BV(SPIF))) ; out.lsb = SPDR; } return out.val; } inline static void transfer(void *buf, size_t count) { if (count == 0) return; uint8_t *p = (uint8_t *)buf; SPDR = *p; while (--count > 0) { uint8_t out = *(p + 1); while (!(SPSR & _BV(SPIF))) ; uint8_t in = SPDR; SPDR = out; *p++ = in; } while (!(SPSR & _BV(SPIF))) ; *p = SPDR; } static void setTransferWriteFill(uint8_t ch ) {_transferWriteFill = ch;} static void transfer(const void * buf, void * retbuf, uint32_t count); // After performing a group of transfers and releasing the chip select // signal, this function allows others to access the SPI bus inline static void endTransaction(void) { #ifdef SPI_TRANSACTION_MISMATCH_LED if (!inTransactionFlag) { pinMode(SPI_TRANSACTION_MISMATCH_LED, OUTPUT); digitalWrite(SPI_TRANSACTION_MISMATCH_LED, HIGH); } inTransactionFlag = 0; #endif if (interruptMode > 0) { #ifdef SPI_AVR_EIMSK if (interruptMode == 1) { SPI_AVR_EIMSK = interruptSave; } else #endif { SREG = interruptSave; } } } // Disable the SPI bus static void end(); // This function is deprecated. New applications should use // beginTransaction() to configure SPI settings. inline static void setBitOrder(uint8_t bitOrder) { if (bitOrder == LSBFIRST) SPCR |= _BV(DORD); else SPCR &= ~(_BV(DORD)); } // This function is deprecated. New applications should use // beginTransaction() to configure SPI settings. inline static void setDataMode(uint8_t dataMode) { SPCR = (SPCR & ~SPI_MODE_MASK) | dataMode; } // This function is deprecated. New applications should use // beginTransaction() to configure SPI settings. inline static void setClockDivider(uint8_t clockDiv) { SPCR = (SPCR & ~SPI_CLOCK_MASK) | (clockDiv & SPI_CLOCK_MASK); SPSR = (SPSR & ~SPI_2XCLOCK_MASK) | ((clockDiv >> 2) & SPI_2XCLOCK_MASK); } // These undocumented functions should not be used. SPI.transfer() // polls the hardware flag which is automatically cleared as the // AVR responds to SPI's interrupt inline static void attachInterrupt() { SPCR |= _BV(SPIE); } inline static void detachInterrupt() { SPCR &= ~_BV(SPIE); } private: static uint8_t interruptMode; // 0=none, 1=mask, 2=global static uint8_t interruptMask; // which interrupts to mask static uint8_t interruptSave; // temp storage, to restore state #ifdef SPI_TRANSACTION_MISMATCH_LED static uint8_t inTransactionFlag; #endif static uint8_t _transferWriteFill; }; /**********************************************************/ /* 32 bit Teensy 3.x */ /**********************************************************/ #elif defined(__arm__) && defined(TEENSYDUINO) && defined(KINETISK) #define SPI_HAS_NOTUSINGINTERRUPT 1 #define SPI_ATOMIC_VERSION 1 class SPISettings { public: SPISettings(uint32_t clock, uint8_t bitOrder, uint8_t dataMode) { if (__builtin_constant_p(clock)) { init_AlwaysInline(clock, bitOrder, dataMode); } else { init_MightInline(clock, bitOrder, dataMode); } } SPISettings() { init_AlwaysInline(4000000, MSBFIRST, SPI_MODE0); } private: void init_MightInline(uint32_t clock, uint8_t bitOrder, uint8_t dataMode) { init_AlwaysInline(clock, bitOrder, dataMode); } void init_AlwaysInline(uint32_t clock, uint8_t bitOrder, uint8_t dataMode) __attribute__((__always_inline__)) { uint32_t t, c = SPI_CTAR_FMSZ(7); if (bitOrder == LSBFIRST) c |= SPI_CTAR_LSBFE; if (__builtin_constant_p(clock)) { if (clock >= F_BUS / 2) { t = SPI_CTAR_PBR(0) | SPI_CTAR_BR(0) | SPI_CTAR_DBR | SPI_CTAR_CSSCK(0); } else if (clock >= F_BUS / 3) { t = SPI_CTAR_PBR(1) | SPI_CTAR_BR(0) | SPI_CTAR_DBR | SPI_CTAR_CSSCK(0); } else if (clock >= F_BUS / 4) { t = SPI_CTAR_PBR(0) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0); } else if (clock >= F_BUS / 5) { t = SPI_CTAR_PBR(2) | SPI_CTAR_BR(0) | SPI_CTAR_DBR | SPI_CTAR_CSSCK(0); } else if (clock >= F_BUS / 6) { t = SPI_CTAR_PBR(1) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0); } else if (clock >= F_BUS / 8) { t = SPI_CTAR_PBR(0) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1); } else if (clock >= F_BUS / 10) { t = SPI_CTAR_PBR(2) | SPI_CTAR_BR(0) | SPI_CTAR_CSSCK(0); } else if (clock >= F_BUS / 12) { t = SPI_CTAR_PBR(1) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(1); } else if (clock >= F_BUS / 16) { t = SPI_CTAR_PBR(0) | SPI_CTAR_BR(3) | SPI_CTAR_CSSCK(2); } else if (clock >= F_BUS / 20) { t = SPI_CTAR_PBR(2) | SPI_CTAR_BR(1) | SPI_CTAR_CSSCK(0); } else if (clock >= F_BUS / 24) { t = SPI_CTAR_PBR(1) | SPI_CTAR_BR(3) | SPI_CTAR_CSSCK(2); } else if (clock >= F_BUS / 32) { t = SPI_CTAR_PBR(0) | SPI_CTAR_BR(4) | SPI_CTAR_CSSCK(3); } else if (clock >= F_BUS / 40) { t = SPI_CTAR_PBR(2) | SPI_CTAR_BR(3) | SPI_CTAR_CSSCK(2); } else if (clock >= F_BUS / 56) { t = SPI_CTAR_PBR(3) | SPI_CTAR_BR(3) | SPI_CTAR_CSSCK(2); } else if (clock >= F_BUS / 64) { t = SPI_CTAR_PBR(0) | SPI_CTAR_BR(5) | SPI_CTAR_CSSCK(4); } else if (clock >= F_BUS / 96) { t = SPI_CTAR_PBR(1) | SPI_CTAR_BR(5) | SPI_CTAR_CSSCK(4); } else if (clock >= F_BUS / 128) { t = SPI_CTAR_PBR(0) | SPI_CTAR_BR(6) | SPI_CTAR_CSSCK(5); } else if (clock >= F_BUS / 192) { t = SPI_CTAR_PBR(1) | SPI_CTAR_BR(6) | SPI_CTAR_CSSCK(5); } else if (clock >= F_BUS / 256) { t = SPI_CTAR_PBR(0) | SPI_CTAR_BR(7) | SPI_CTAR_CSSCK(6); } else if (clock >= F_BUS / 384) { t = SPI_CTAR_PBR(1) | SPI_CTAR_BR(7) | SPI_CTAR_CSSCK(6); } else if (clock >= F_BUS / 512) { t = SPI_CTAR_PBR(0) | SPI_CTAR_BR(8) | SPI_CTAR_CSSCK(7); } else if (clock >= F_BUS / 640) { t = SPI_CTAR_PBR(2) | SPI_CTAR_BR(7) | SPI_CTAR_CSSCK(6); } else { /* F_BUS / 768 */ t = SPI_CTAR_PBR(1) | SPI_CTAR_BR(8) | SPI_CTAR_CSSCK(7); } } else { for (uint32_t i=0; i<23; i++) { t = ctar_clock_table[i]; if (clock >= F_BUS / ctar_div_table[i]) break; } } if (dataMode & 0x08) { c |= SPI_CTAR_CPOL; } if (dataMode & 0x04) { c |= SPI_CTAR_CPHA; t = (t & 0xFFFF0FFF) | ((t & 0xF000) >> 4); } ctar = c | t; } static const uint16_t ctar_div_table[23]; static const uint32_t ctar_clock_table[23]; uint32_t ctar; friend class SPIClass; }; class SPIClass { // Teensy 3.x public: #if defined(__MK20DX128__) || defined(__MK20DX256__) static const uint8_t CNT_MISO_PINS = 2; static const uint8_t CNT_MOSI_PINS = 2; static const uint8_t CNT_SCK_PINS = 2; static const uint8_t CNT_CS_PINS = 9; #elif defined(__MK64FX512__) || defined(__MK66FX1M0__) static const uint8_t CNT_MISO_PINS = 4; static const uint8_t CNT_MOSI_PINS = 4; static const uint8_t CNT_SCK_PINS = 3; static const uint8_t CNT_CS_PINS = 11; #endif typedef struct { volatile uint32_t &clock_gate_register; uint32_t clock_gate_mask; uint8_t queue_size; uint8_t spi_irq; uint32_t max_dma_count; uint8_t tx_dma_channel; uint8_t rx_dma_channel; void (*dma_rxisr)(); uint8_t miso_pin[CNT_MISO_PINS]; uint32_t miso_mux[CNT_MISO_PINS]; uint8_t mosi_pin[CNT_MOSI_PINS]; uint32_t mosi_mux[CNT_MOSI_PINS]; uint8_t sck_pin[CNT_SCK_PINS]; uint32_t sck_mux[CNT_SCK_PINS]; uint8_t cs_pin[CNT_CS_PINS]; uint32_t cs_mux[CNT_CS_PINS]; uint8_t cs_mask[CNT_CS_PINS]; } SPI_Hardware_t; static const SPI_Hardware_t spi0_hardware; static const SPI_Hardware_t spi1_hardware; static const SPI_Hardware_t spi2_hardware; enum DMAState { notAllocated, idle, active, completed}; public: constexpr SPIClass(uintptr_t myport, uintptr_t myhardware) : port_addr(myport), hardware_addr(myhardware) { } // Initialize the SPI library void begin(); // If SPI is to used from within an interrupt, this function registers // that interrupt with the SPI library, so beginTransaction() can // prevent conflicts. The input interruptNumber is the number used // with attachInterrupt. If SPI is used from a different interrupt // (eg, a timer), interruptNumber should be 255. void usingInterrupt(uint8_t n) { if (n == 3 || n == 4 || n == 24 || n == 33) { usingInterrupt(IRQ_PORTA); } else if (n == 0 || n == 1 || (n >= 16 && n <= 19) || n == 25 || n == 32) { usingInterrupt(IRQ_PORTB); } else if ((n >= 9 && n <= 13) || n == 15 || n == 22 || n == 23 || (n >= 27 && n <= 30)) { usingInterrupt(IRQ_PORTC); } else if (n == 2 || (n >= 5 && n <= 8) || n == 14 || n == 20 || n == 21) { usingInterrupt(IRQ_PORTD); } else if (n == 26 || n == 31) { usingInterrupt(IRQ_PORTE); } } void usingInterrupt(IRQ_NUMBER_t interruptName); void notUsingInterrupt(IRQ_NUMBER_t interruptName); // Before using SPI.transfer() or asserting chip select pins, // this function is used to gain exclusive access to the SPI bus // and configure the correct settings. void beginTransaction(SPISettings settings) { if (interruptMasksUsed) { __disable_irq(); if (interruptMasksUsed & 0x01) { interruptSave[0] = NVIC_ICER0 & interruptMask[0]; NVIC_ICER0 = interruptSave[0]; } #if NVIC_NUM_INTERRUPTS > 32 if (interruptMasksUsed & 0x02) { interruptSave[1] = NVIC_ICER1 & interruptMask[1]; NVIC_ICER1 = interruptSave[1]; } #endif #if NVIC_NUM_INTERRUPTS > 64 && defined(NVIC_ISER2) if (interruptMasksUsed & 0x04) { interruptSave[2] = NVIC_ICER2 & interruptMask[2]; NVIC_ICER2 = interruptSave[2]; } #endif #if NVIC_NUM_INTERRUPTS > 96 && defined(NVIC_ISER3) if (interruptMasksUsed & 0x08) { interruptSave[3] = NVIC_ICER3 & interruptMask[3]; NVIC_ICER3 = interruptSave[3]; } #endif __enable_irq(); } #ifdef SPI_TRANSACTION_MISMATCH_LED if (inTransactionFlag) { pinMode(SPI_TRANSACTION_MISMATCH_LED, OUTPUT); digitalWrite(SPI_TRANSACTION_MISMATCH_LED, HIGH); } inTransactionFlag = 1; #endif if (port().CTAR0 != settings.ctar) { port().MCR = SPI_MCR_MDIS | SPI_MCR_HALT | SPI_MCR_PCSIS(0x3F); port().CTAR0 = settings.ctar; port().CTAR1 = settings.ctar| SPI_CTAR_FMSZ(8); port().MCR = SPI_MCR_MSTR | SPI_MCR_PCSIS(0x3F); } } // Write to the SPI bus (MOSI pin) and also receive (MISO pin) uint8_t transfer(uint8_t data) { port().SR = SPI_SR_TCF; port().PUSHR = data; while (!(port().SR & SPI_SR_TCF)) ; // wait return port().POPR; } uint16_t transfer16(uint16_t data) { port().SR = SPI_SR_TCF; port().PUSHR = data | SPI_PUSHR_CTAS(1); while (!(port().SR & SPI_SR_TCF)) ; // wait return port().POPR; } void inline transfer(void *buf, size_t count) {transfer(buf, buf, count);} void setTransferWriteFill(uint8_t ch ) {_transferWriteFill = ch;} void transfer(const void * buf, void * retbuf, size_t count); // Asynch support (DMA ) #ifdef SPI_HAS_TRANSFER_ASYNC bool transfer(const void *txBuffer, void *rxBuffer, size_t count, EventResponderRef event_responder); friend void _spi_dma_rxISR0(void); friend void _spi_dma_rxISR1(void); friend void _spi_dma_rxISR2(void); inline void dma_rxisr(void); #endif // After performing a group of transfers and releasing the chip select // signal, this function allows others to access the SPI bus void endTransaction(void) { #ifdef SPI_TRANSACTION_MISMATCH_LED if (!inTransactionFlag) { pinMode(SPI_TRANSACTION_MISMATCH_LED, OUTPUT); digitalWrite(SPI_TRANSACTION_MISMATCH_LED, HIGH); } inTransactionFlag = 0; #endif if (interruptMasksUsed) { if (interruptMasksUsed & 0x01) { NVIC_ISER0 = interruptSave[0]; } #if NVIC_NUM_INTERRUPTS > 32 if (interruptMasksUsed & 0x02) { NVIC_ISER1 = interruptSave[1]; } #endif #if NVIC_NUM_INTERRUPTS > 64 && defined(NVIC_ISER2) if (interruptMasksUsed & 0x04) { NVIC_ISER2 = interruptSave[2]; } #endif #if NVIC_NUM_INTERRUPTS > 96 && defined(NVIC_ISER3) if (interruptMasksUsed & 0x08) { NVIC_ISER3 = interruptSave[3]; } #endif } } // Disable the SPI bus void end(); // This function is deprecated. New applications should use // beginTransaction() to configure SPI settings. void setBitOrder(uint8_t bitOrder); // This function is deprecated. New applications should use // beginTransaction() to configure SPI settings. void setDataMode(uint8_t dataMode); // This function is deprecated. New applications should use // beginTransaction() to configure SPI settings. void setClockDivider(uint8_t clockDiv) { if (clockDiv == SPI_CLOCK_DIV2) { setClockDivider_noInline(SPISettings(12000000, MSBFIRST, SPI_MODE0).ctar); } else if (clockDiv == SPI_CLOCK_DIV4) { setClockDivider_noInline(SPISettings(4000000, MSBFIRST, SPI_MODE0).ctar); } else if (clockDiv == SPI_CLOCK_DIV8) { setClockDivider_noInline(SPISettings(2000000, MSBFIRST, SPI_MODE0).ctar); } else if (clockDiv == SPI_CLOCK_DIV16) { setClockDivider_noInline(SPISettings(1000000, MSBFIRST, SPI_MODE0).ctar); } else if (clockDiv == SPI_CLOCK_DIV32) { setClockDivider_noInline(SPISettings(500000, MSBFIRST, SPI_MODE0).ctar); } else if (clockDiv == SPI_CLOCK_DIV64) { setClockDivider_noInline(SPISettings(250000, MSBFIRST, SPI_MODE0).ctar); } else { /* clockDiv == SPI_CLOCK_DIV128 */ setClockDivider_noInline(SPISettings(125000, MSBFIRST, SPI_MODE0).ctar); } } void setClockDivider_noInline(uint32_t clk); // These undocumented functions should not be used. SPI.transfer() // polls the hardware flag which is automatically cleared as the // AVR responds to SPI's interrupt void attachInterrupt() { } void detachInterrupt() { } // Teensy 3.x can use alternate pins for these 3 SPI signals. void setMOSI(uint8_t pin); void setMISO(uint8_t pin); void setSCK(uint8_t pin); // return true if "pin" has special chip select capability uint8_t pinIsChipSelect(uint8_t pin); bool pinIsMOSI(uint8_t pin); bool pinIsMISO(uint8_t pin); bool pinIsSCK(uint8_t pin); // return true if both pin1 and pin2 have independent chip select capability bool pinIsChipSelect(uint8_t pin1, uint8_t pin2); // configure a pin for chip select and return its SPI_MCR_PCSIS bitmask // setCS() is a special function, not intended for use from normal Arduino // programs/sketches. See the ILI3941_t3 library for an example. uint8_t setCS(uint8_t pin); private: KINETISK_SPI_t & port() { return *(KINETISK_SPI_t *)port_addr; } const SPI_Hardware_t & hardware() { return *(const SPI_Hardware_t *)hardware_addr; } void updateCTAR(uint32_t ctar); uintptr_t port_addr; uintptr_t hardware_addr; uint8_t miso_pin_index = 0; uint8_t mosi_pin_index = 0; uint8_t sck_pin_index = 0; uint8_t interruptMasksUsed = 0; uint32_t interruptMask[(NVIC_NUM_INTERRUPTS+31)/32] = {}; uint32_t interruptSave[(NVIC_NUM_INTERRUPTS+31)/32] = {}; #ifdef SPI_TRANSACTION_MISMATCH_LED uint8_t inTransactionFlag = 0; #endif uint8_t _transferWriteFill = 0; // DMA Support #ifdef SPI_HAS_TRANSFER_ASYNC bool initDMAChannels(); DMAState _dma_state = DMAState::notAllocated; uint32_t _dma_count_remaining = 0; // How many bytes left to output after current DMA completes DMAChannel *_dmaTX = nullptr; DMAChannel *_dmaRX = nullptr; EventResponder *_dma_event_responder = nullptr; #endif }; /**********************************************************/ /* 32 bit Teensy-LC */ /**********************************************************/ #elif defined(__arm__) && defined(TEENSYDUINO) && defined(KINETISL) #define SPI_ATOMIC_VERSION 1 class SPISettings { public: SPISettings(uint32_t clock, uint8_t bitOrder, uint8_t dataMode) { if (__builtin_constant_p(clock)) { init_AlwaysInline(clock, bitOrder, dataMode); } else { init_MightInline(clock, bitOrder, dataMode); } } SPISettings() { init_AlwaysInline(4000000, MSBFIRST, SPI_MODE0); } private: void init_MightInline(uint32_t clock, uint8_t bitOrder, uint8_t dataMode) { init_AlwaysInline(clock, bitOrder, dataMode); } void init_AlwaysInline(uint32_t clock, uint8_t bitOrder, uint8_t dataMode) __attribute__((__always_inline__)) { uint8_t c = SPI_C1_MSTR | SPI_C1_SPE; if (dataMode & 0x04) c |= SPI_C1_CPHA; if (dataMode & 0x08) c |= SPI_C1_CPOL; if (bitOrder == LSBFIRST) c |= SPI_C1_LSBFE; c1 = c; if (__builtin_constant_p(clock)) { if (clock >= F_BUS / 2) { c = SPI_BR_SPPR(0) | SPI_BR_SPR(0); } else if (clock >= F_BUS / 4) { c = SPI_BR_SPPR(1) | SPI_BR_SPR(0); } else if (clock >= F_BUS / 6) { c = SPI_BR_SPPR(2) | SPI_BR_SPR(0); } else if (clock >= F_BUS / 8) { c = SPI_BR_SPPR(3) | SPI_BR_SPR(0); } else if (clock >= F_BUS / 10) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(0); } else if (clock >= F_BUS / 12) { c = SPI_BR_SPPR(5) | SPI_BR_SPR(0); } else if (clock >= F_BUS / 14) { c = SPI_BR_SPPR(6) | SPI_BR_SPR(0); } else if (clock >= F_BUS / 16) { c = SPI_BR_SPPR(7) | SPI_BR_SPR(0); } else if (clock >= F_BUS / 20) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(1); } else if (clock >= F_BUS / 24) { c = SPI_BR_SPPR(5) | SPI_BR_SPR(1); } else if (clock >= F_BUS / 28) { c = SPI_BR_SPPR(6) | SPI_BR_SPR(1); } else if (clock >= F_BUS / 32) { c = SPI_BR_SPPR(7) | SPI_BR_SPR(1); } else if (clock >= F_BUS / 40) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(2); } else if (clock >= F_BUS / 48) { c = SPI_BR_SPPR(5) | SPI_BR_SPR(2); } else if (clock >= F_BUS / 56) { c = SPI_BR_SPPR(6) | SPI_BR_SPR(2); } else if (clock >= F_BUS / 64) { c = SPI_BR_SPPR(7) | SPI_BR_SPR(2); } else if (clock >= F_BUS / 80) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(3); } else if (clock >= F_BUS / 96) { c = SPI_BR_SPPR(5) | SPI_BR_SPR(3); } else if (clock >= F_BUS / 112) { c = SPI_BR_SPPR(6) | SPI_BR_SPR(3); } else if (clock >= F_BUS / 128) { c = SPI_BR_SPPR(7) | SPI_BR_SPR(3); } else if (clock >= F_BUS / 160) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(4); } else if (clock >= F_BUS / 192) { c = SPI_BR_SPPR(5) | SPI_BR_SPR(4); } else if (clock >= F_BUS / 224) { c = SPI_BR_SPPR(6) | SPI_BR_SPR(4); } else if (clock >= F_BUS / 256) { c = SPI_BR_SPPR(7) | SPI_BR_SPR(4); } else if (clock >= F_BUS / 320) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(5); } else if (clock >= F_BUS / 384) { c = SPI_BR_SPPR(5) | SPI_BR_SPR(5); } else if (clock >= F_BUS / 448) { c = SPI_BR_SPPR(6) | SPI_BR_SPR(5); } else if (clock >= F_BUS / 512) { c = SPI_BR_SPPR(7) | SPI_BR_SPR(5); } else if (clock >= F_BUS / 640) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(6); } else /* F_BUS / 768 */ { c = SPI_BR_SPPR(5) | SPI_BR_SPR(6); } } else { for (uint32_t i=0; i<30; i++) { c = br_clock_table[i]; if (clock >= F_BUS / br_div_table[i]) break; } } br[0] = c; if (__builtin_constant_p(clock)) { if (clock >= (F_PLL/2) / 2) { c = SPI_BR_SPPR(0) | SPI_BR_SPR(0); } else if (clock >= (F_PLL/2) / 4) { c = SPI_BR_SPPR(1) | SPI_BR_SPR(0); } else if (clock >= (F_PLL/2) / 6) { c = SPI_BR_SPPR(2) | SPI_BR_SPR(0); } else if (clock >= (F_PLL/2) / 8) { c = SPI_BR_SPPR(3) | SPI_BR_SPR(0); } else if (clock >= (F_PLL/2) / 10) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(0); } else if (clock >= (F_PLL/2) / 12) { c = SPI_BR_SPPR(5) | SPI_BR_SPR(0); } else if (clock >= (F_PLL/2) / 14) { c = SPI_BR_SPPR(6) | SPI_BR_SPR(0); } else if (clock >= (F_PLL/2) / 16) { c = SPI_BR_SPPR(7) | SPI_BR_SPR(0); } else if (clock >= (F_PLL/2) / 20) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(1); } else if (clock >= (F_PLL/2) / 24) { c = SPI_BR_SPPR(5) | SPI_BR_SPR(1); } else if (clock >= (F_PLL/2) / 28) { c = SPI_BR_SPPR(6) | SPI_BR_SPR(1); } else if (clock >= (F_PLL/2) / 32) { c = SPI_BR_SPPR(7) | SPI_BR_SPR(1); } else if (clock >= (F_PLL/2) / 40) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(2); } else if (clock >= (F_PLL/2) / 48) { c = SPI_BR_SPPR(5) | SPI_BR_SPR(2); } else if (clock >= (F_PLL/2) / 56) { c = SPI_BR_SPPR(6) | SPI_BR_SPR(2); } else if (clock >= (F_PLL/2) / 64) { c = SPI_BR_SPPR(7) | SPI_BR_SPR(2); } else if (clock >= (F_PLL/2) / 80) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(3); } else if (clock >= (F_PLL/2) / 96) { c = SPI_BR_SPPR(5) | SPI_BR_SPR(3); } else if (clock >= (F_PLL/2) / 112) { c = SPI_BR_SPPR(6) | SPI_BR_SPR(3); } else if (clock >= (F_PLL/2) / 128) { c = SPI_BR_SPPR(7) | SPI_BR_SPR(3); } else if (clock >= (F_PLL/2) / 160) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(4); } else if (clock >= (F_PLL/2) / 192) { c = SPI_BR_SPPR(5) | SPI_BR_SPR(4); } else if (clock >= (F_PLL/2) / 224) { c = SPI_BR_SPPR(6) | SPI_BR_SPR(4); } else if (clock >= (F_PLL/2) / 256) { c = SPI_BR_SPPR(7) | SPI_BR_SPR(4); } else if (clock >= (F_PLL/2) / 320) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(5); } else if (clock >= (F_PLL/2) / 384) { c = SPI_BR_SPPR(5) | SPI_BR_SPR(5); } else if (clock >= (F_PLL/2) / 448) { c = SPI_BR_SPPR(6) | SPI_BR_SPR(5); } else if (clock >= (F_PLL/2) / 512) { c = SPI_BR_SPPR(7) | SPI_BR_SPR(5); } else if (clock >= (F_PLL/2) / 640) { c = SPI_BR_SPPR(4) | SPI_BR_SPR(6); } else /* (F_PLL/2) / 768 */ { c = SPI_BR_SPPR(5) | SPI_BR_SPR(6); } } else { for (uint32_t i=0; i<30; i++) { c = br_clock_table[i]; if (clock >= (F_PLL/2) / br_div_table[i]) break; } } br[1] = c; } static const uint8_t br_clock_table[30]; static const uint16_t br_div_table[30]; uint8_t c1, br[2]; friend class SPIClass; }; class SPIClass { // Teensy-LC public: static const uint8_t CNT_MISO_PINS = 2; static const uint8_t CNT_MMOSI_PINS = 2; static const uint8_t CNT_SCK_PINS = 2; static const uint8_t CNT_CS_PINS = 2; typedef struct { volatile uint32_t &clock_gate_register; uint32_t clock_gate_mask; uint8_t br_index; uint8_t tx_dma_channel; uint8_t rx_dma_channel; void (*dma_isr)(); uint8_t miso_pin[CNT_MISO_PINS]; uint32_t miso_mux[CNT_MISO_PINS]; uint8_t mosi_pin[CNT_MMOSI_PINS]; uint32_t mosi_mux[CNT_MMOSI_PINS]; uint8_t sck_pin[CNT_SCK_PINS]; uint32_t sck_mux[CNT_SCK_PINS]; uint8_t cs_pin[CNT_CS_PINS]; uint32_t cs_mux[CNT_CS_PINS]; uint8_t cs_mask[CNT_CS_PINS]; } SPI_Hardware_t; static const SPI_Hardware_t spi0_hardware; static const SPI_Hardware_t spi1_hardware; enum DMAState { notAllocated, idle, active, completed}; public: constexpr SPIClass(uintptr_t myport, uintptr_t myhardware) : port_addr(myport), hardware_addr(myhardware) { } // Initialize the SPI library void begin(); // If SPI is to used from within an interrupt, this function registers // that interrupt with the SPI library, so beginTransaction() can // prevent conflicts. The input interruptNumber is the number used // with attachInterrupt. If SPI is used from a different interrupt // (eg, a timer), interruptNumber should be 255. void usingInterrupt(uint8_t n) { if (n == 3 || n == 4) { usingInterrupt(IRQ_PORTA); } else if ((n >= 2 && n <= 15) || (n >= 20 && n <= 23)) { usingInterrupt(IRQ_PORTCD); } } void usingInterrupt(IRQ_NUMBER_t interruptName) { uint32_t n = (uint32_t)interruptName; if (n < NVIC_NUM_INTERRUPTS) interruptMask |= (1 << n); } void notUsingInterrupt(IRQ_NUMBER_t interruptName) { uint32_t n = (uint32_t)interruptName; if (n < NVIC_NUM_INTERRUPTS) interruptMask &= ~(1 << n); } // Before using SPI.transfer() or asserting chip select pins, // this function is used to gain exclusive access to the SPI bus // and configure the correct settings. void beginTransaction(SPISettings settings) { if (interruptMask) { __disable_irq(); interruptSave = NVIC_ICER0 & interruptMask; NVIC_ICER0 = interruptSave; __enable_irq(); } #ifdef SPI_TRANSACTION_MISMATCH_LED if (inTransactionFlag) { pinMode(SPI_TRANSACTION_MISMATCH_LED, OUTPUT); digitalWrite(SPI_TRANSACTION_MISMATCH_LED, HIGH); } inTransactionFlag = 1; #endif port().C1 = settings.c1; port().BR = settings.br[hardware().br_index]; } // Write to the SPI bus (MOSI pin) and also receive (MISO pin) uint8_t transfer(uint8_t data) { port().DL = data; while (!(port().S & SPI_S_SPRF)) ; // wait return port().DL; } uint16_t transfer16(uint16_t data) { port().C2 = SPI_C2_SPIMODE; port().S; port().DL = data; port().DH = data >> 8; while (!(port().S & SPI_S_SPRF)) ; // wait uint16_t r = port().DL | (port().DH << 8); port().C2 = 0; port().S; return r; } void transfer(void *buf, size_t count) { if (count == 0) return; uint8_t *p = (uint8_t *)buf; while (!(port().S & SPI_S_SPTEF)) ; // wait port().DL = *p; while (--count > 0) { uint8_t out = *(p + 1); while (!(port().S & SPI_S_SPTEF)) ; // wait __disable_irq(); port().DL = out; while (!(port().S & SPI_S_SPRF)) ; // wait uint8_t in = port().DL; __enable_irq(); *p++ = in; } while (!(port().S & SPI_S_SPRF)) ; // wait *p = port().DL; } void setTransferWriteFill(uint8_t ch ) {_transferWriteFill = ch;} void transfer(const void * buf, void * retbuf, size_t count); // Asynch support (DMA ) #ifdef SPI_HAS_TRANSFER_ASYNC bool transfer(const void *txBuffer, void *rxBuffer, size_t count, EventResponderRef event_responder); friend void _spi_dma_rxISR0(void); friend void _spi_dma_rxISR1(void); inline void dma_isr(void); #endif // After performing a group of transfers and releasing the chip select // signal, this function allows others to access the SPI bus void endTransaction(void) { #ifdef SPI_TRANSACTION_MISMATCH_LED if (!inTransactionFlag) { pinMode(SPI_TRANSACTION_MISMATCH_LED, OUTPUT); digitalWrite(SPI_TRANSACTION_MISMATCH_LED, HIGH); } inTransactionFlag = 0; #endif if (interruptMask) { NVIC_ISER0 = interruptSave; } } // Disable the SPI bus void end(); // This function is deprecated. New applications should use // beginTransaction() to configure SPI settings. void setBitOrder(uint8_t bitOrder) { uint8_t c = port().C1 | SPI_C1_SPE; if (bitOrder == LSBFIRST) c |= SPI_C1_LSBFE; else c &= ~SPI_C1_LSBFE; port().C1 = c; } // This function is deprecated. New applications should use // beginTransaction() to configure SPI settings. void setDataMode(uint8_t dataMode) { uint8_t c = port().C1 | SPI_C1_SPE; if (dataMode & 0x04) c |= SPI_C1_CPHA; else c &= ~SPI_C1_CPHA; if (dataMode & 0x08) c |= SPI_C1_CPOL; else c &= ~SPI_C1_CPOL; port().C1 = c; } // This function is deprecated. New applications should use // beginTransaction() to configure SPI settings. void setClockDivider(uint8_t clockDiv) { unsigned int i = hardware().br_index; if (clockDiv == SPI_CLOCK_DIV2) { port().BR = (SPISettings(12000000, MSBFIRST, SPI_MODE0).br[i]); } else if (clockDiv == SPI_CLOCK_DIV4) { port().BR = (SPISettings(4000000, MSBFIRST, SPI_MODE0).br[i]); } else if (clockDiv == SPI_CLOCK_DIV8) { port().BR = (SPISettings(2000000, MSBFIRST, SPI_MODE0).br[i]); } else if (clockDiv == SPI_CLOCK_DIV16) { port().BR = (SPISettings(1000000, MSBFIRST, SPI_MODE0).br[i]); } else if (clockDiv == SPI_CLOCK_DIV32) { port().BR = (SPISettings(500000, MSBFIRST, SPI_MODE0).br[i]); } else if (clockDiv == SPI_CLOCK_DIV64) { port().BR = (SPISettings(250000, MSBFIRST, SPI_MODE0).br[i]); } else { /* clockDiv == SPI_CLOCK_DIV128 */ port().BR = (SPISettings(125000, MSBFIRST, SPI_MODE0).br[i]); } } // These undocumented functions should not be used. SPI.transfer() // polls the hardware flag which is automatically cleared as the // AVR responds to SPI's interrupt void attachInterrupt() { } void detachInterrupt() { } // Teensy LC can use alternate pins for these 3 SPI signals. void setMOSI(uint8_t pin); void setMISO(uint8_t pin); void setSCK(uint8_t pin); // return true if "pin" has special chip select capability bool pinIsChipSelect(uint8_t pin); bool pinIsMOSI(uint8_t pin); bool pinIsMISO(uint8_t pin); bool pinIsSCK(uint8_t pin); // return true if both pin1 and pin2 have independent chip select capability bool pinIsChipSelect(uint8_t pin1, uint8_t pin2) { return false; } // configure a pin for chip select and return its SPI_MCR_PCSIS bitmask // setCS() is a special function, not intended for use from normal Arduino // programs/sketches. See the ILI3941_t3 library for an example. uint8_t setCS(uint8_t pin); private: KINETISL_SPI_t & port() { return *(KINETISL_SPI_t *)port_addr; } const SPI_Hardware_t & hardware() { return *(const SPI_Hardware_t *)hardware_addr; } uintptr_t port_addr; uintptr_t hardware_addr; uint32_t interruptMask = 0; uint32_t interruptSave = 0; uint8_t mosi_pin_index = 0; uint8_t miso_pin_index = 0; uint8_t sck_pin_index = 0; #ifdef SPI_TRANSACTION_MISMATCH_LED uint8_t inTransactionFlag = 0; #endif uint8_t _transferWriteFill = 0; #ifdef SPI_HAS_TRANSFER_ASYNC // DMA Support bool initDMAChannels(); DMAState _dma_state = DMAState::notAllocated; uint32_t _dma_count_remaining = 0; // How many bytes left to output after current DMA completes DMAChannel *_dmaTX = nullptr; DMAChannel *_dmaRX = nullptr; EventResponder *_dma_event_responder = nullptr; #endif }; /**********************************************************/ /* 32 bit Teensy 4.x */ /**********************************************************/ #elif defined(__arm__) && defined(TEENSYDUINO) && (defined(__IMXRT1052__) || defined(__IMXRT1062__)) #define SPI_ATOMIC_VERSION 1 //#include "debug/printf.h" // TODO...... #undef SPI_HAS_TRANSFER_ASYNC class SPISettings { public: SPISettings(uint32_t clock, uint8_t bitOrder, uint8_t dataMode) { if (__builtin_constant_p(clock)) { init_AlwaysInline(clock, bitOrder, dataMode); } else { init_MightInline(clock, bitOrder, dataMode); } } SPISettings() { init_AlwaysInline(4000000, MSBFIRST, SPI_MODE0); } private: void init_MightInline(uint32_t clock, uint8_t bitOrder, uint8_t dataMode) { init_AlwaysInline(clock, bitOrder, dataMode); } void init_AlwaysInline(uint32_t clock, uint8_t bitOrder, uint8_t dataMode) __attribute__((__always_inline__)) { // TODO: Need to check timings as related to chip selects? uint32_t d, div; uint32_t clkhz = 528000000u / (((CCM_CBCMR >> 26 ) & 0x07 ) + 1); // LPSPI peripheral clock if (clock == 0) clock =1; d= clkhz/clock; if (d && clkhz/d > clock) d++; if (d > 257) d= 257; // max div if (d > 2) { div = d-2; } else { div =0; } ccr = LPSPI_CCR_SCKDIV(div) | LPSPI_CCR_DBT(div/2); tcr = LPSPI_TCR_FRAMESZ(7); // TCR has polarity and bit order too // handle LSB setup if (bitOrder == LSBFIRST) tcr |= LPSPI_TCR_LSBF; // Handle Data Mode if (dataMode & 0x08) tcr |= LPSPI_TCR_CPOL; // Note: On T3.2 when we set CPHA it also updated the timing. It moved the // PCS to SCK Delay Prescaler into the After SCK Delay Prescaler if (dataMode & 0x04) tcr |= LPSPI_TCR_CPHA; } uint32_t ccr; // clock config, pg 2660 (RT1050 ref, rev 2) uint32_t tcr; // transmit command, pg 2664 (RT1050 ref, rev 2) friend class SPIClass; }; class SPIClass { // Teensy 4 public: static const uint8_t CNT_MISO_PINS = 1; static const uint8_t CNT_MOSI_PINS = 1; static const uint8_t CNT_SCK_PINS = 1; static const uint8_t CNT_CS_PINS = 1; typedef struct { volatile uint32_t &clock_gate_register; const uint32_t clock_gate_mask; const uint8_t miso_pin[CNT_MISO_PINS]; const uint32_t miso_mux[CNT_MISO_PINS]; const uint8_t mosi_pin[CNT_MOSI_PINS]; const uint32_t mosi_mux[CNT_MOSI_PINS]; const uint8_t sck_pin[CNT_SCK_PINS]; const uint32_t sck_mux[CNT_SCK_PINS]; const uint8_t cs_pin[CNT_CS_PINS]; const uint32_t cs_mux[CNT_CS_PINS]; } SPI_Hardware_t; public: constexpr SPIClass(IMXRT_LPSPI_t *myport, const SPI_Hardware_t *myhardware) : port(myport), hardware(myhardware) { } // Initialize the SPI library void begin(); // If SPI is to used from within an interrupt, this function registers // that interrupt with the SPI library, so beginTransaction() can // prevent conflicts. The input interruptNumber is the number used // with attachInterrupt. If SPI is used from a different interrupt // (eg, a timer), interruptNumber should be 255. void usingInterrupt(uint8_t n) { if (n >= CORE_NUM_DIGITAL) return; volatile uint32_t *gpio = portOutputRegister(n); switch((uint32_t)gpio) { case (uint32_t)&GPIO1_DR: usingInterrupt(IRQ_GPIO1_0_15); usingInterrupt(IRQ_GPIO1_16_31); break; case (uint32_t)&GPIO2_DR: usingInterrupt(IRQ_GPIO2_0_15); usingInterrupt(IRQ_GPIO2_16_31); break; case (uint32_t)&GPIO3_DR: usingInterrupt(IRQ_GPIO3_0_15); usingInterrupt(IRQ_GPIO3_16_31); break; case (uint32_t)&GPIO4_DR: usingInterrupt(IRQ_GPIO4_0_15); usingInterrupt(IRQ_GPIO4_16_31); break; } } void usingInterrupt(IRQ_NUMBER_t interruptName); void notUsingInterrupt(IRQ_NUMBER_t interruptName); // Before using SPI.transfer() or asserting chip select pins, // this function is used to gain exclusive access to the SPI bus // and configure the correct settings. void beginTransaction(SPISettings settings) { if (interruptMasksUsed) { __disable_irq(); if (interruptMasksUsed & 0x01) { interruptSave[0] = NVIC_ICER0 & interruptMask[0]; NVIC_ICER0 = interruptSave[0]; } if (interruptMasksUsed & 0x02) { interruptSave[1] = NVIC_ICER1 & interruptMask[1]; NVIC_ICER1 = interruptSave[1]; } if (interruptMasksUsed & 0x04) { interruptSave[2] = NVIC_ICER2 & interruptMask[2]; NVIC_ICER2 = interruptSave[2]; } if (interruptMasksUsed & 0x08) { interruptSave[3] = NVIC_ICER3 & interruptMask[3]; NVIC_ICER3 = interruptSave[3]; } if (interruptMasksUsed & 0x10) { interruptSave[4] = NVIC_ICER4 & interruptMask[4]; NVIC_ICER4 = interruptSave[4]; } __enable_irq(); } #ifdef SPI_TRANSACTION_MISMATCH_LED if (inTransactionFlag) { pinMode(SPI_TRANSACTION_MISMATCH_LED, OUTPUT); digitalWrite(SPI_TRANSACTION_MISMATCH_LED, HIGH); } inTransactionFlag = 1; #endif //printf("trans\n"); port->CR = 0; port->CFGR1 = LPSPI_CFGR1_MASTER | LPSPI_CFGR1_SAMPLE; port->CCR = settings.ccr; port->TCR = settings.tcr; //port->CCR = LPSPI_CCR_SCKDIV(4); //port->TCR = LPSPI_TCR_FRAMESZ(7); port->CR = LPSPI_CR_MEN; } // Write to the SPI bus (MOSI pin) and also receive (MISO pin) uint8_t transfer(uint8_t data) { // TODO: check for space in fifo? port->TDR = data; while (1) { uint32_t fifo = (port->FSR >> 16) & 0x1F; if (fifo > 0) return port->RDR; } //port().SR = SPI_SR_TCF; //port().PUSHR = data; //while (!(port().SR & SPI_SR_TCF)) ; // wait //return port().POPR; } uint16_t transfer16(uint16_t data) { uint32_t tcr = port->TCR; port->TCR = (tcr & 0xfffff000) | LPSPI_TCR_FRAMESZ(15); // turn on 16 bit mode port->TDR = data; // output 16 bit data. while ((port->RSR & LPSPI_RSR_RXEMPTY)) ; // wait while the RSR fifo is empty... port->TCR = tcr; // restore back return port->RDR; } void inline transfer(void *buf, size_t count) {transfer(buf, buf, count);} void setTransferWriteFill(uint8_t ch ) {_transferWriteFill = ch;} void transfer(const void * buf, void * retbuf, size_t count); // Asynch support (DMA ) #ifdef SPI_HAS_TRANSFER_ASYNC bool transfer(const void *txBuffer, void *rxBuffer, size_t count, EventResponderRef event_responder); friend void _spi_dma_rxISR0(void); friend void _spi_dma_rxISR1(void); friend void _spi_dma_rxISR2(void); inline void dma_rxisr(void); #endif // After performing a group of transfers and releasing the chip select // signal, this function allows others to access the SPI bus void endTransaction(void) { #ifdef SPI_TRANSACTION_MISMATCH_LED if (!inTransactionFlag) { pinMode(SPI_TRANSACTION_MISMATCH_LED, OUTPUT); digitalWrite(SPI_TRANSACTION_MISMATCH_LED, HIGH); } inTransactionFlag = 0; #endif if (interruptMasksUsed) { if (interruptMasksUsed & 0x01) NVIC_ISER0 = interruptSave[0]; if (interruptMasksUsed & 0x02) NVIC_ISER1 = interruptSave[1]; if (interruptMasksUsed & 0x04) NVIC_ISER2 = interruptSave[2]; if (interruptMasksUsed & 0x08) NVIC_ISER3 = interruptSave[3]; if (interruptMasksUsed & 0x10) NVIC_ISER4 = interruptSave[4]; } } // Disable the SPI bus void end(); // This function is deprecated. New applications should use // beginTransaction() to configure SPI settings. void setBitOrder(uint8_t bitOrder); // This function is deprecated. New applications should use // beginTransaction() to configure SPI settings. void setDataMode(uint8_t dataMode); // This function is deprecated. New applications should use // beginTransaction() to configure SPI settings. void setClockDivider(uint8_t clockDiv) { if (clockDiv == SPI_CLOCK_DIV2) { //setClockDivider_noInline(SPISettings(12000000, MSBFIRST, SPI_MODE0).ctar); } else if (clockDiv == SPI_CLOCK_DIV4) { //setClockDivider_noInline(SPISettings(4000000, MSBFIRST, SPI_MODE0).ctar); } else if (clockDiv == SPI_CLOCK_DIV8) { //setClockDivider_noInline(SPISettings(2000000, MSBFIRST, SPI_MODE0).ctar); } else if (clockDiv == SPI_CLOCK_DIV16) { //setClockDivider_noInline(SPISettings(1000000, MSBFIRST, SPI_MODE0).ctar); } else if (clockDiv == SPI_CLOCK_DIV32) { //setClockDivider_noInline(SPISettings(500000, MSBFIRST, SPI_MODE0).ctar); } else if (clockDiv == SPI_CLOCK_DIV64) { //setClockDivider_noInline(SPISettings(250000, MSBFIRST, SPI_MODE0).ctar); } else { /* clockDiv == SPI_CLOCK_DIV128 */ //setClockDivider_noInline(SPISettings(125000, MSBFIRST, SPI_MODE0).ctar); } } void setClockDivider_noInline(uint32_t clk); // These undocumented functions should not be used. SPI.transfer() // polls the hardware flag which is automatically cleared as the // AVR responds to SPI's interrupt void attachInterrupt() { } void detachInterrupt() { } // Teensy 3.x can use alternate pins for these 3 SPI signals. void setMOSI(uint8_t pin); void setMISO(uint8_t pin); void setSCK(uint8_t pin); // return true if "pin" has special chip select capability uint8_t pinIsChipSelect(uint8_t pin); bool pinIsMOSI(uint8_t pin); bool pinIsMISO(uint8_t pin); bool pinIsSCK(uint8_t pin); // return true if both pin1 and pin2 have independent chip select capability bool pinIsChipSelect(uint8_t pin1, uint8_t pin2); // configure a pin for chip select and return its SPI_MCR_PCSIS bitmask // setCS() is a special function, not intended for use from normal Arduino // programs/sketches. See the ILI3941_t3 library for an example. uint8_t setCS(uint8_t pin); private: //KINETISK_SPI_t & port() { return *(KINETISK_SPI_t *)port_addr; } IMXRT_LPSPI_t * const port; const SPI_Hardware_t * const hardware; void updateCTAR(uint32_t ctar); uint8_t miso_pin_index = 0; uint8_t mosi_pin_index = 0; uint8_t sck_pin_index = 0; uint8_t interruptMasksUsed = 0; uint32_t interruptMask[(NVIC_NUM_INTERRUPTS+31)/32] = {}; uint32_t interruptSave[(NVIC_NUM_INTERRUPTS+31)/32] = {}; #ifdef SPI_TRANSACTION_MISMATCH_LED uint8_t inTransactionFlag = 0; #endif uint8_t _transferWriteFill = 0; // DMA Support #ifdef SPI_HAS_TRANSFER_ASYNC bool initDMAChannels(); DMAState _dma_state = DMAState::notAllocated; uint32_t _dma_count_remaining = 0; // How many bytes left to output after current DMA completes DMAChannel *_dmaTX = nullptr; DMAChannel *_dmaRX = nullptr; EventResponder *_dma_event_responder = nullptr; #endif }; #endif extern SPIClass SPI; #if defined(__MKL26Z64__) extern SPIClass SPI1; #endif #if defined(__MK64FX512__) || defined(__MK66FX1M0__) extern SPIClass SPI1; extern SPIClass SPI2; #endif #endif