|
1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556 |
- /*
- ILI9341_due_config.h - Arduino Due library for interfacing with ILI9341-based TFTs
-
- Code: https://github.com/marekburiak/ILI9341_due
- Documentation: http://marekburiak.github.io/ILI9341_due/
-
- Copyright (c) 2015 Marek Buriak
-
- */
-
- #ifndef _ILI9341_due_configH_
- #define _ILI9341_due_configH_
-
- // comment out the SPI mode you want to use (does not matter for AVR)
- #define ILI9341_SPI_MODE_NORMAL // uses SPI library
- //#define ILI9341_SPI_MODE_EXTENDED // uses Extended SPI in Due, make sure you use pin 4, 10 or 52 for CS
- //#define ILI9341_SPI_MODE_DMA // uses DMA in Due
-
- // set the clock divider
- #if defined ARDUINO_SAM_DUE
- #define ILI9341_SPI_CLKDIVIDER 4 // for Due
- #elif defined ARDUINO_ARCH_AVR
- #define ILI9341_SPI_CLKDIVIDER SPI_CLOCK_DIV2 // for Uno, Mega,...
- #elif defined(TEENSYDUINO)
- #define SPICLOCK 30000000
- #endif
-
-
-
- // uncomment if you want to use SPI transactions. Uncomment it if the library does not work when used with other libraries.
- #define ILI_USE_SPI_TRANSACTION
-
- // comment out if you do need to use scaled text. The text will draw then faster.
- #define TEXT_SCALING_ENABLED
-
- // default letter spacing
- #define DEFAULT_LETTER_SPACING 2
-
- // default line spacing
- #define DEFAULT_LINE_SPACING 0
-
- // sets the space between lines as part of the text
- //#define LINE_SPACING_AS_PART_OF_LETTERS
-
- // number representing the maximum angle (e.g. if 100, then if you pass in start=0 and end=50, you get a half circle)
- // this can be changed with setArcParams function at runtime
- #define DEFAULT_ARC_ANGLE_MAX 360
-
- // rotational offset in degrees defining position of value 0 (-90 will put it at the top of circle)
- // this can be changed with setAngleOffset function at runtime
- #define DEFAULT_ANGLE_OFFSET -90
-
-
-
-
- #endif
|
