Updated Motion Controller example

examples/Bluetooth/JoystickBT/JoystickBT.ino

@@ -583,4 +583,4 @@ void processPS3MotionTimer() {
       PS3_MOTION_timer = 0; // joystick not there any more...
     }
   }
-}
+}

examples/Bluetooth/JoystickBT/helperPS.ino

@@ -1,10 +1,17 @@
 float pitch, roll;
 float gx, gy, gz;
+int16_t mx, my, mz;
 uint16_t xc, yc; 
 uint8_t isTouch;
 float ax, ay, az;
 int16_t xc_old, yc_old;
 
+/* Decode 12-bit signed value (assuming two's complement) */
+#define TWELVE_BIT_SIGNED(x) (((x) & 0x800)?(-(((~(x)) & 0xFFF) + 1)):(x))
+
+#define Model_ZCM1 1
+//#define Model_ZCM2 0
+
 void printAngles(){
   //test function calls
   float gx, gy, gz;
@@ -23,7 +30,6 @@ void getCoords(uint16_t &xc, uint16_t &yc, uint8_t &isTouch){
 
 	//uint8_t finger = 0;  //only getting finger 1
 
-
   // Trackpad touch 1: id, active, x, y
   xc = ((psAxis[37] & 0x0f) << 8) | psAxis[36];
   yc = psAxis[38] << 4 | ((psAxis[37] & 0xf0) >> 4),
@@ -70,6 +76,8 @@ void printPS3MotionAngles(){
   Serial.printf("Accel-g's: %f, %f, %f\n", ax, ay, az);
   getPS3MotionGyro(gx, gy, gz);
   Serial.printf("Gyro-deg/sec: %f, %f, %f\n", gx, gy, gz);
+  getPS3MotionMag(mx, my, mz);
+  Serial.printf("Mag: %d, %d, %d\n", mx, my, mz);
 
   getPS3MotionAngles(pitch, roll);
   Serial.printf("Pitch/Roll: %f, %f\n", pitch, roll);
@@ -77,13 +85,22 @@ void printPS3MotionAngles(){
 
 
 void getPS3MotionAccel( float &ax,  float &ay,  float &az){
-	int accelx = (int16_t)(psAxis[9]<<8) | psAxis[8];
-	int accely = (int16_t)(psAxis[11]<<8) | psAxis[10];
-	int accelz = (int16_t)(psAxis[13]<<8) | psAxis[12];
-
-	ax = (float) accelx/8192;
-	ay = (float) accely/8192;
-	az = (float) accelz/8192;
+    int accelx = (psAxis[15]<<8 | psAxis[14]);
+    int accely = (psAxis[17]<<8 | psAxis[16]);
+    int accelz = (psAxis[19]<<8 | psAxis[18]);  
+  #if defined(Model_ZCM1)
+  	accelx = accelx-0x8000;
+  	accely = accely-0x8000;
+  	accelz = accelz-0x8000;
+  #elif defined(Model_ZCM2)
+    accelx = (accelx & 0x8000) ? (-(~accelx & 0xFFFF) + 1) : accelx;
+    accely = (accely & 0x8000) ? (-(~accely & 0xFFFF) + 1) : accely;
+    accelz = (accelz & 0x8000) ? (-(~accelz & 0xFFFF) + 1) : accelz;
+  #endif
+    ax = (float) accelx/4096;
+  	ay = (float) accely/4096;
+  	az = (float) accelz/4096;
+  
 }
 
 void getPS3MotionAngles(float &p, float &r){
@@ -93,13 +110,37 @@ void getPS3MotionAngles(float &p, float &r){
 }
 
 void getPS3MotionGyro(float &gx, float &gy, float &gz){
-	int gyrox = (int16_t)(psAxis[21]<<8) | psAxis[20];
-	int gyroy = (int16_t)(psAxis[23]<<8) | psAxis[22];
-	int gyroz = (int16_t)(psAxis[25]<<8) | psAxis[24];
-
-	gx = (float) gyrox * RAD_TO_DEG/1024;
+    int gyrox = (psAxis[21]<<8 | psAxis[20]);
+    int gyroy = (psAxis[23]<<8 | psAxis[22]);
+    int gyroz = (psAxis[25]<<8 | psAxis[24]);
+  #if defined(Model_ZCM1)
+  	gyrox = gyrox-0x8000;
+  	gyroy = gyroy-0x8000;
+  	gyroz = gyroz-0x8000;
+  #elif defined(Model_ZCM2)
+    gyrox = (gyrox & 0x8000) ? (-(~gyrox & 0xFFFF) + 1) : gyrox;
+    gyroy = (gyroy & 0x8000) ? (-(~gyroy & 0xFFFF) + 1) : gyroy;
+    gyroz = (gyroz & 0x8000) ? (-(~gyroz & 0xFFFF) + 1) : gyroz;
+  #endif
+
+  	gx = (float) gyrox * RAD_TO_DEG/1024;
 	gy = (float) gyroy * RAD_TO_DEG/1024;
 	gz = (float) gyroz * RAD_TO_DEG/1024;
+  
 }
 	
-	
+void getPS3MotionMag(int16_t &mx, int16_t &my, int16_t &mz){
+  #if defined(Model_ZCM1)
+      mx = TWELVE_BIT_SIGNED(((psAxis[33] & 0x0F) << 8) |
+                 psAxis[34]);
+
+      my = TWELVE_BIT_SIGNED((psAxis[35] << 4) |
+                 (psAxis[36] & 0xF0) >> 4);
+
+      mz = TWELVE_BIT_SIGNED(((psAxis[36] & 0x0F) << 8) |
+                  psAxis[37]);
+  #elif defined(Model_ZCM2)
+      // NOTE: This model does not have magnetometers
+      Serial.println("Not avail for ZCM2!");
+  #endif
+}