visus
/
teensy-usbhost
關注 1
收藏 0
複製 0
程式碼 問題 0 合併請求 0 版本發佈 0 Wiki 活動
瀏覽代碼

USBSerial_BigBuffer - T4.x (multi devices) 

This delta originated to do the work similar to what was done
for the MIDI code base and support two versions of the object.

All of the code was renamed to a new base class USBSerialBase
which has everything, except the main buffer.

Two sub-classes were made that the only difference is the size of the
buffer to hold all of the USB RX and TX information.

This started off to try to support an FT2232H device which transers
512 bytes at a time instead of what most of our devices were transfering
which is 64 bytes.

While doing this, I found that we have a similar issue with the T4.x
boards which now transfer 512 bytes as well and our Serial object would
not handle it.

So there are two sublasses:
```
USBSerial - for those up to 64 byte transfers
USBSerial_BigBuffer - for up to 512 bytes
```

Note: by default the biguffer version will only handle those
devices > 64 bytes, but you can pass in an optional parameter of the
minimum size, so doing something like:
```
USBSerial_BigBuffer userial(myusb, 1);
```
Will handle all up to 512.

Also the FTDI2232H supports two USB to Serial objects, and our code
was setup that in most cases including when we put in VID:PID pair in
our table, the code would claim would claim
the object at device level so only one USB Serial adapter.

So changed table to support saying for this VID:PID claim at
interface level.  It now works, but not sure for the device I have as
it is a USB to Serial and JTAG and not sure how to test 2nd one.

But while doing this created a test sketch for Multiple Host USB Serial
objects and the two are claimed by this.

I also created a new version of the Teensy USBToSerial example sketch
that if you configure USB type to Dual Serial or Triple Serial will output
SerialUSB1 to Serial2 and SerialUSB2 to Serial3, which works, and then
tried T4 configured for Dual plugged
into T4.1 with above sketch and could talk to both USB Serial adapters.

The Claim code was rearranged a lot, so hopefully did not break
anything.

But tested with
T4 as mentioned, both Single and Dual Serial
T3.2  with Single Serial, plus: Serial, Joystick, Keyboard...
FTDI - USB to Serial adapter (Sparkfun)
CP2104 - Adafruit
PL2303 - some clones ...

So hopefully most things are still working
main
Kurt Eckhardt 4 年之前
父節點
df0ef72d8d
當前提交
5392c4eb70
共有 5 個檔案被更改，包括 359 行新增 和 328 行删除
分割檢視 顯示文件統計
  1. +42
    -4
      USBHost_t36.h
  2. +11
    -1
      examples/Test/SerialTest/SerialTest.ino
  3. +0
    -0
      examples/Test/SerialTest/defs.h
  4. +2
    -0
      keywords.txt
  5. +304
    -323
      serial.cpp

+ 42
- 4
USBHost_t36.h 查看文件

@@ -1382,14 +1382,25 @@ private:

//--------------------------------------------------------------------------

class USBSerial: public USBDriver, public Stream {
class USBSerialBase: public USBDriver, public Stream {
public:


// FIXME: need different USBSerial, with bigger buffers for 480 Mbit & faster speed
enum { BUFFER_SIZE = 648 }; // must hold at least 6 max size packets, plus 2 extra bytes
enum { DEFAULT_WRITE_TIMEOUT = 3500};
USBSerial(USBHost &host) : txtimer(this) { init(); }

USBSerialBase(USBHost &host, uint32_t *big_buffer, uint16_t buffer_size,
uint16_t min_pipe_rxtx, uint16_t max_pipe_rxtx) :
txtimer(this),
_bigBuffer(big_buffer),
_big_buffer_size(buffer_size),
_min_rxtx(min_pipe_rxtx),
_max_rxtx(max_pipe_rxtx)
{

init();
}

void begin(uint32_t baud, uint32_t format=USBHOST_SERIAL_8N1);
void end(void);
uint32_t writeTimeout() {return write_timeout_;}
@@ -1422,7 +1433,12 @@ private:
Transfer_t mytransfers[7] __attribute__ ((aligned(32)));
strbuf_t mystring_bufs[1];
USBDriverTimer txtimer;
uint32_t bigbuffer[(BUFFER_SIZE+3)/4];
uint32_t *_bigBuffer;
uint16_t _big_buffer_size;
uint16_t _min_rxtx;
uint16_t _max_rxtx;


setup_t setup;
uint8_t setupdata[16]; //
uint32_t baudrate;
@@ -1457,11 +1473,33 @@ private:
uint16_t idVendor;
uint16_t idProduct;
sertype_t sertype;
int claim_at_type;
} product_vendor_mapping_t;
static product_vendor_mapping_t pid_vid_mapping[];

};

class USBSerial : public USBSerialBase {
public:
USBSerial(USBHost &host) :
// hard code the normal one to 1 and 64 bytes for most likely most are 64
USBSerialBase(host, bigbuffer, sizeof(bigbuffer), 1, 64) {};
private:
enum { BUFFER_SIZE = 648 }; // must hold at least 6 max size packets, plus 2 extra bytes
uint32_t bigbuffer[(BUFFER_SIZE+3)/4];
};

class USBSerial_BigBuffer: public USBSerialBase {
public:
// Default to larger than can be handled by other serial, but can overide
USBSerial_BigBuffer(USBHost &host, uint16_t min_rxtx=65) :
// hard code the normal one to 1 and 64 bytes for most likely most are 64
USBSerialBase(host, bigbuffer, sizeof(bigbuffer), min_rxtx, 512) {};
private:
enum { BUFFER_SIZE = 4096 }; // must hold at least 6 max size packets, plus 2 extra bytes
uint32_t bigbuffer[(BUFFER_SIZE+3)/4];
};

//--------------------------------------------------------------------------

class AntPlus: public USBDriver {

+ 11
- 1
examples/Test/SerialTest/SerialTest.ino 查看文件

@@ -12,7 +12,17 @@ USBHub hub2(myusb);
USBHIDParser hid1(myusb);
USBHIDParser hid2(myusb);
USBHIDParser hid3(myusb);
USBSerial userial(myusb);

// There is now two versions of the USBSerial class, that are both derived from a common Base class
// The difference is on how large of transfers that it can handle. This is controlled by
// the device descriptor, where up to now we handled those up to 64 byte USB transfers.
// But there are now new devices that support larger transfer like 512 bytes. This for example
// includes the Teensy 4.x boards. For these we need the big buffer version.
// uncomment one of the following defines for userial
USBSerial userial(myusb); // works only for those Serial devices who transfer <=64 bytes (like T3.x, FTDI...)
//USBSerial_BigBuffer userial(myusb, 1); // Handles anything up to 512 bytes
//USBSerial_BigBuffer userial(myusb); // Handles up to 512 but by default only for those > 64 bytes


USBDriver *drivers[] = {&hub1, &hub2, &hid1, &hid2, &hid3, &userial};
#define CNT_DEVICES (sizeof(drivers)/sizeof(drivers[0]))

+ 0
- 0
examples/Test/SerialTest/defs.h 查看文件


+ 2
- 0
keywords.txt 查看文件

@@ -8,6 +8,8 @@ DigitizerController KEYWORD1
MIDIDevice KEYWORD1
MIDIDevice_BigBuffer KEYWORD1
USBSerial KEYWORD1
USBSerial_BigBuffer KEYWORD1
USBSerialBase KEYWORD1
AntPlus KEYWORD1
JoystickController KEYWORD1
RawHIDController KEYWORD1

+ 304
- 323
serial.cpp 查看文件

@@ -42,20 +42,21 @@
/************************************************************/
// Define mapping VID/PID - to Serial Device type.
/************************************************************/
USBSerial::product_vendor_mapping_t USBSerial::pid_vid_mapping[] = {
USBSerialBase::product_vendor_mapping_t USBSerialBase::pid_vid_mapping[] = {
// FTDI mappings.
{0x0403, 0x6001, USBSerial::FTDI},
{0x0403, 0x6001, USBSerialBase::FTDI, 0},
{0x0403, 0x8088, USBSerialBase::FTDI, 1}, // 2 devices try to claim at interface level

// PL2303
{0x67B,0x2303, USBSerial::PL2303},
{0x67B,0x2303, USBSerialBase::PL2303, 0},

// CH341
{0x4348, 0x5523, USBSerial::CH341 },
{0x1a86, 0x7523, USBSerial::CH341 },
{0x1a86, 0x5523, USBSerial::CH341 },
{0x4348, 0x5523, USBSerialBase::CH341, 0},
{0x1a86, 0x7523, USBSerialBase::CH341, 0 },
{0x1a86, 0x5523, USBSerialBase::CH341, 0 },

// Silex CP210...
{0x10c4, 0xea60, USBSerial::CP210X }
{0x10c4, 0xea60, USBSerialBase::CP210X, 0 }
};


@@ -63,7 +64,7 @@ USBSerial::product_vendor_mapping_t USBSerial::pid_vid_mapping[] = {
// Initialization and claiming of devices & interfaces
/************************************************************/

void USBSerial::init()
void USBSerialBase::init()
{
contribute_Pipes(mypipes, sizeof(mypipes)/sizeof(Pipe_t));
contribute_Transfers(mytransfers, sizeof(mytransfers)/sizeof(Transfer_t));
@@ -72,345 +73,325 @@ void USBSerial::init()
format_ = USBHOST_SERIAL_8N1;
}

bool USBSerial::claim(Device_t *dev, int type, const uint8_t *descriptors, uint32_t len)
bool USBSerialBase::claim(Device_t *dev, int type, const uint8_t *descriptors, uint32_t len)
{
// only claim at interface level
println("USBSerial claim this=", (uint32_t)this, HEX);
print("USBSerial(", _max_rxtx, DEC);
println(")claim this=", (uint32_t)this, HEX);
print("vid=", dev->idVendor, HEX);
print(", pid=", dev->idProduct, HEX);
print(", bDeviceClass = ", dev->bDeviceClass);
print(", bDeviceSubClass = ", dev->bDeviceSubClass);
println(", bDeviceProtocol = ", dev->bDeviceProtocol);
print_hexbytes(descriptors, len);
if (type == 0) {
//---------------------------------------------------------------------
// CDCACM
if ((dev->bDeviceClass == 2) && (dev->bDeviceSubClass == 0)) {
// It is a communication device see if we can extract the data...
// Try some ttyACM types?
// This code may be similar to MIDI code.
// But first pass see if we can simply look at the interface...
// Lets walk through end points and see if we
// can find an RX and TX bulk transfer end point.
// 0 1 2 3 4 5 6 7 8 *9 10 1 2 3 *4 5 6 7 *8 9 20 1 2 *3 4 5 6 7 8 9*30 1 2 3 4 5 6 7 8 *9 40 1 2 3 4 5 *6 7 8 9 50 1 2
// USB2AX
//09 04 00 00 01 02 02 01 00 05 24 00 10 01 04 24 02 06 05 24 06 00 01 07 05 82 03 08 00 FF 09 04 01 00 02 0A 00 00 00 07 05 04 02 10 00 01 07 05 83 02 10 00 01
//09 04 01 00 02 0A 00 00 00 07 05 04 02 10 00 01 07 05 83 02 10 00 01
// Teensy 3.6
//09 04 00 00 01 02 02 01 00 05 24 00 10 01 05 24 01 01 01 04 24 02 06 05 24 06 00 01 07 05 82 03 10 00 40 09 04 01 00 02 0A 00 00 00 07 05 03 02 40 00 00 07 05 84 02 40 00 00
//09 04 01 00 02 0A 00 00 00 07 05 03 02 40 00 00 07 05 84 02 40 00 00
const uint8_t *p = descriptors;
const uint8_t *end = p + len;

if (p[0] != 9 || p[1] != 4) return false; // interface descriptor
//println(" bInterfaceClass=", p[5]);
//println(" bInterfaceSubClass=", p[6]);
if (p[5] != 2) return false; // bInterfaceClass: 2 Communications
if (p[6] != 2) return false; // bInterfaceSubClass: 2 serial
p += 9;
println(" Interface is Serial");
uint8_t rx_ep = 0;
uint8_t tx_ep = 0;
uint16_t rx_size = 0;
uint16_t tx_size = 0;
interface = 0; // clear out any interface numbers passed in.

while (p < end) {
len = *p;
if (len < 4) return false;
if (p + len > end) return false; // reject if beyond end of data
uint32_t type = p[1];
//println("type: ", type);
// Unlike Audio, we need to look at Interface as our endpoints are after them...
if (type == 4 ) { // Interface - lets remember it's number...
interface = p[2];
println(" Interface: ", interface);
}
else if (type == 0x24) { // 0x24 = CS_INTERFACE,
uint32_t subtype = p[2];
print(" CS_INTERFACE - subtype: ", subtype);
if (len >= 4) print(" ", p[3], HEX);
if (len >= 5) print(" ", p[4], HEX);
if (len >= 6) print(" ", p[5], HEX);
switch (subtype) {
case 0: println(" - Header Functional Descriptor"); break;
case 1: println(" - Call Management Functional"); break;
case 2: println(" - Abstract Control Management"); break;
case 4: println(" - Telephone Ringer"); break;
case 6: println(" - union Functional"); break;
default: println(" - ??? other"); break;
}
// First pass ignore...
} else if (type == 5) {
// endpoint descriptor
if (p[0] < 7) return false; // at least 7 bytes
if (p[3] == 2) { // First try ignore the first one which is interrupt...
println(" Endpoint: ", p[2], HEX);
switch (p[2] & 0xF0) {
case 0x80:
// IN endpoint
if (rx_ep == 0) {
rx_ep = p[2] & 0x0F;
rx_size = p[4] | (p[5] << 8);
println(" rx_size = ", rx_size);
}
break;
case 0x00:
// OUT endpoint
if (tx_ep == 0) {
tx_ep = p[2];
tx_size = p[4] | (p[5] << 8);
println(" tx_size = ", tx_size);
}
break;
default:
println(" invalid end point: ", p[2]);
return false;
}
}
} else {
println(" Unknown type: ", type);
return false; // unknown
}
p += len;
}
print(" exited loop rx:", rx_ep);
println(", tx:", tx_ep);
if (!rx_ep || !tx_ep) return false; // did not get our two end points
if (!init_buffers(rx_size, tx_size)) return false;
println(" rx buffer size:", rxsize);
println(" tx buffer size:", txsize);
rxpipe = new_Pipe(dev, 2, rx_ep & 15, 1, rx_size);
if (!rxpipe) return false;
txpipe = new_Pipe(dev, 2, tx_ep, 0, tx_size);
if (!txpipe) {
// TODO: free rxpipe
return false;
}
sertype = CDCACM;
rxpipe->callback_function = rx_callback;
queue_Data_Transfer(rxpipe, rx1, (rx_size < 64)? rx_size : 64, this);
rxstate = 1;
if (rx_size > 128) {
queue_Data_Transfer(rxpipe, rx2, rx_size, this);
rxstate = 3;
}
txstate = 0;
txpipe->callback_function = tx_callback;
baudrate = 115200;
// Wish I could just call Control to do the output... Maybe can defer until the user calls begin()
// control requires that device is setup which is not until this call completes...
println("Control - CDCACM DTR...");
// Need to setup the data the line coding data
mk_setup(setup, 0x21, 0x22, 3, 0, 0);
queue_Control_Transfer(dev, &setup, NULL, this);
control_queued = true;
pending_control = 0x0; // Maybe don't need to do...
return true;
}

// See if the vendor_id:product_id is in our list of products.
sertype = UNKNOWN;
for (uint8_t i = 0; i < (sizeof(pid_vid_mapping)/sizeof(pid_vid_mapping[0])); i++) {
if ((dev->idVendor == pid_vid_mapping[i].idVendor) && (dev->idProduct == pid_vid_mapping[i].idProduct)) {
sertype = pid_vid_mapping[i].sertype;
break;
}
}
if (sertype == UNKNOWN) return false; // not one of ours

// Lets try to locate the end points. Code is common across these devices
println("len = ", len);
uint8_t count_end_points = descriptors[4];
if (count_end_points < 2) return false; // not enough end points
if (len < 23) return false;
if (descriptors[0] != 9) return false; // length 9
//---------------------------------------------------------------------------
// Lets try to map CDCACM devices only at device level
if ((dev->bDeviceClass == 2) && (dev->bDeviceSubClass == 0)) {
if (type != 0) return false;

// It is a communication device see if we can extract the data...
// Try some ttyACM types?
// This code may be similar to MIDI code.
// But first pass see if we can simply look at the interface...
// Lets walk through end points and see if we
// can find an RX and TX bulk transfer end point.
//Example vid=67B, pid=2303
// 0 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 20 1 2 3 4 5 6 7 8 9
//09 04 00 00 03 FF 00 00 00 07 05 81 03 0A 00 01 07 05 02 02 40 00 00 07 05 83 02 40 00 00
uint32_t rxep = 0;
uint32_t txep = 0;
// 0 1 2 3 4 5 6 7 8 *9 10 1 2 3 *4 5 6 7 *8 9 20 1 2 *3 4 5 6 7 8 9*30 1 2 3 4 5 6 7 8 *9 40 1 2 3 4 5 *6 7 8 9 50 1 2
// USB2AX
//09 04 00 00 01 02 02 01 00 05 24 00 10 01 04 24 02 06 05 24 06 00 01 07 05 82 03 08 00 FF 09 04 01 00 02 0A 00 00 00 07 05 04 02 10 00 01 07 05 83 02 10 00 01
//09 04 01 00 02 0A 00 00 00 07 05 04 02 10 00 01 07 05 83 02 10 00 01
// Teensy 3.6
//09 04 00 00 01 02 02 01 00 05 24 00 10 01 05 24 01 01 01 04 24 02 06 05 24 06 00 01 07 05 82 03 10 00 40 09 04 01 00 02 0A 00 00 00 07 05 03 02 40 00 00 07 05 84 02 40 00 00
//09 04 01 00 02 0A 00 00 00 07 05 03 02 40 00 00 07 05 84 02 40 00 00
const uint8_t *p = descriptors;
const uint8_t *end = p + len;

if (p[0] != 9 || p[1] != 4) return false; // interface descriptor
//println(" bInterfaceClass=", p[5]);
//println(" bInterfaceSubClass=", p[6]);
if (p[5] != 2) return false; // bInterfaceClass: 2 Communications
if (p[6] != 2) return false; // bInterfaceSubClass: 2 serial
p += 9;
println(" Interface is Serial");
uint8_t rx_ep = 0;
uint8_t tx_ep = 0;
uint16_t rx_size = 0;
uint16_t tx_size = 0;
uint32_t descriptor_index = 9;
while (count_end_points-- && ((rxep == 0) || txep == 0)) {
if (descriptors[descriptor_index] != 7) return false; // length 7
if (descriptors[descriptor_index+1] != 5) return false; // ep desc
if ((descriptors[descriptor_index+3] == 2)
&& (descriptors[descriptor_index+4] <= 64)
&& (descriptors[descriptor_index+5] == 0)) {
// have a bulk EP size
if (descriptors[descriptor_index+2] & 0x80 ) {
rxep = descriptors[descriptor_index+2];
rx_size = descriptors[descriptor_index+4];
} else {
txep = descriptors[descriptor_index+2];
tx_size = descriptors[descriptor_index+4];
interface = 0; // clear out any interface numbers passed in.

while (p < end) {
len = *p;
if (len < 4) return false;
if (p + len > end) return false; // reject if beyond end of data
uint32_t type = p[1];
//println("type: ", type);
// Unlike Audio, we need to look at Interface as our endpoints are after them...
if (type == 4 ) { // Interface - lets remember it's number...
interface = p[2];
println(" Interface: ", interface);
}
else if (type == 0x24) { // 0x24 = CS_INTERFACE,
uint32_t subtype = p[2];
print(" CS_INTERFACE - subtype: ", subtype);
if (len >= 4) print(" ", p[3], HEX);
if (len >= 5) print(" ", p[4], HEX);
if (len >= 6) print(" ", p[5], HEX);
switch (subtype) {
case 0: println(" - Header Functional Descriptor"); break;
case 1: println(" - Call Management Functional"); break;
case 2: println(" - Abstract Control Management"); break;
case 4: println(" - Telephone Ringer"); break;
case 6: println(" - union Functional"); break;
default: println(" - ??? other"); break;
}
// First pass ignore...
} else if (type == 5) {
// endpoint descriptor
if (p[0] < 7) return false; // at least 7 bytes
if (p[3] == 2) { // First try ignore the first one which is interrupt...
println(" Endpoint: ", p[2], HEX);
switch (p[2] & 0xF0) {
case 0x80:
// IN endpoint
if (rx_ep == 0) {
rx_ep = p[2] & 0x0F;
rx_size = p[4] | (p[5] << 8);
println(" rx_size = ", rx_size);
}
break;
case 0x00:
// OUT endpoint
if (tx_ep == 0) {
tx_ep = p[2];
tx_size = p[4] | (p[5] << 8);
println(" tx_size = ", tx_size);
}
break;
default:
println(" invalid end point: ", p[2]);
return false;
}
}
} else {
println(" Unknown type: ", type);
return false; // unknown
}
descriptor_index += 7; // setup to look at next one...
p += len;
}
// Try to verify the end points.
if (!check_rxtx_ep(rxep, txep)) return false;
print("USBSerial, rxep=", rxep & 15);
print("(", rx_size);
print("), txep=", txep);
print("(", tx_size);
println(")");

print(" exited loop rx:", rx_ep);
println(", tx:", tx_ep);
if (!rx_ep || !tx_ep) return false; // did not get our two end points
if (!init_buffers(rx_size, tx_size)) return false;
println(" rx buffer size:", rxsize);
println(" tx buffer size:", txsize);

rxpipe = new_Pipe(dev, 2, rxep & 15, 1, rx_size);
rxpipe = new_Pipe(dev, 2, rx_ep & 15, 1, rx_size);
if (!rxpipe) return false;
txpipe = new_Pipe(dev, 2, txep, 0, tx_size);
txpipe = new_Pipe(dev, 2, tx_ep, 0, tx_size);
if (!txpipe) {
//free_Pipe(rxpipe);
// TODO: free rxpipe
return false;
}
sertype = CDCACM;
rxpipe->callback_function = rx_callback;
queue_Data_Transfer(rxpipe, rx1, rx_size, this);
queue_Data_Transfer(rxpipe, rx1, (rx_size < 64)? rx_size : 64, this);
rxstate = 1;
if (rx_size > 128) {
queue_Data_Transfer(rxpipe, rx2, rx_size, this);
rxstate = 3;
}
txstate = 0;
txpipe->callback_function = tx_callback;
baudrate = 115200;
// Wish I could just call Control to do the output... Maybe can defer until the user calls begin()
// control requires that device is setup which is not until this call completes...
println("Control - CDCACM DTR...");
// Need to setup the data the line coding data
mk_setup(setup, 0x21, 0x22, 3, 0, 0);
queue_Control_Transfer(dev, &setup, NULL, this);
control_queued = true;
pending_control = 0x0; // Maybe don't need to do...
return true;
}

// Now do specific setup per type
switch (sertype) {
//---------------------------------------------------------------------
// FTDI
case FTDI:
{
pending_control = 0x0F;
mk_setup(setup, 0x40, 0, 0, 0, 0); // reset port
queue_Control_Transfer(dev, &setup, NULL, this);
control_queued = true;
return true;
}
//------------------------------------------------------------------------
// Prolific
// TODO: Note: there are probably more vendor/product pairs.. Maybe should create table of them
case PL2303:
{
// First attempt keep it simple...
println("PL2303: readRegister(0x04)");
// Need to setup the data the line coding data
mk_setup(setup, 0xC0, 0x1, 0x8484, 0, 1);
queue_Control_Transfer(dev, &setup, setupdata, this);
control_queued = true;
setup_state = 1; // We are at step one of setup...
pending_control = 0x3f;
return true;
}
//------------------------------------------------------------------------
// CH341
case CH341:
{
println("CH341: 0xC0, 0x5f, 0, 0, 8");
// Need to setup the data the line coding data
mk_setup(setup, 0xC0, 0x5f, 0, 0, sizeof(setupdata));
queue_Control_Transfer(dev, &setup, setupdata, this);
control_queued = true;
setup_state = 1; // We are at step one of setup...
pending_control = 0x7f;
return true;
//---------------------------------------------------------------------------
// Else lets see if this is a PID/VID we know something about.
// See if the vendor_id:product_id is in our list of products.
sertype = UNKNOWN;
for (uint8_t i = 0; i < (sizeof(pid_vid_mapping)/sizeof(pid_vid_mapping[0])); i++) {
if ((dev->idVendor == pid_vid_mapping[i].idVendor) && (dev->idProduct == pid_vid_mapping[i].idProduct)) {
sertype = pid_vid_mapping[i].sertype;
if (pid_vid_mapping[i].claim_at_type != type) {
println("Serial device wants to map at interface level");
return false;
}
//------------------------------------------------------------------------
// CP210X
case CP210X:
{
println("CP210X: 0x41, 0x11, 0, 0, 0 - reset port");
// Need to setup the data the line coding data
mk_setup(setup, 0x41, 0x11, 0, 0, 0);
queue_Control_Transfer(dev, &setup, NULL, this);
control_queued = true;
setup_state = 1; // We are at step one of setup...
pending_control = 0xf;
return true;
break;
}
}
if (sertype == UNKNOWN) {
// Not in our list see if CDCACM type...
// only at the Interface level
if (type != 1) return false;
// TTYACM: <Composit device>
//
// We first tried to claim a simple ttyACM device like a teensy who is configured
// only as Serial at the device level like what was done for midi
//
// However some devices are a compisit of multiple Interfaces, so see if this Interface
// is of the CDC Interface class and 0 for SubClass and protocol
// Todo: some of this can maybe be combined with the Whole device code above.
if (descriptors[0] != 9 || descriptors[1] != 4) return false; // interface descriptor
if (descriptors[4] < 2) return false; // less than 2 end points
if (descriptors[5] != 0xA) return false; // bInterfaceClass, 0xa = CDC data
if (descriptors[6] != 0) return false; // bInterfaceSubClass
if (descriptors[7] != 0) return false; // bInterfaceProtocol
sertype = CDCACM;
// Lets see if we can fold in the ACM stuff here...
}
// Lets try to locate the end points. Code is common across these devices
println("len = ", len);
uint8_t count_end_points = descriptors[4];
if (count_end_points < 2) return false; // not enough end points
if (len < 23) return false;
if (descriptors[0] != 9) return false; // length 9

// Lets walk through end points and see if we
// can find an RX and TX bulk transfer end point.
//Example vid=67B, pid=2303
// 0 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 20 1 2 3 4 5 6 7 8 9
//09 04 00 00 03 FF 00 00 00 07 05 81 03 0A 00 01 07 05 02 02 40 00 00 07 05 83 02 40 00 00

// lets see about FTD2232H
//09 04 00 00 02 FF FF FF 02 07 05 81 02 00 02 00 07 05 02 02 00 02 00 09 04 01 00 02 FF FF FF 02 07 05 83 02 00 02 00 07 05 04 02 00 02 00
//09 04 01 00 02 FF FF FF 02 07 05 83 02 00 02 00 07 05 04 02 00 02 00


uint32_t rxep = 0;
uint32_t txep = 0;
uint16_t rx_size = 0;
uint16_t tx_size = 0;
uint32_t descriptor_index = 9;
while (count_end_points-- && ((rxep == 0) || txep == 0)) {
if (descriptors[descriptor_index] != 7) return false; // length 7
if (descriptors[descriptor_index+1] != 5) return false; // ep desc
uint16_t ep_size = descriptors[descriptor_index+4] + (uint16_t)(descriptors[descriptor_index+5] << 8);
if ((descriptors[descriptor_index+3] == 2)
&& (ep_size <= _max_rxtx) && (ep_size >= _min_rxtx)) {
// have a bulk EP size
if (descriptors[descriptor_index+2] & 0x80 ) {
rxep = descriptors[descriptor_index+2];
rx_size = ep_size;
} else {
txep = descriptors[descriptor_index+2];
tx_size = ep_size;
}
//------------------------------------------------------------------------
// PID:VID - not in our product list.
default:
return false;
}
} else if (type != 1) return false;
// TTYACM: <Composit device>
//
// We first tried to claim a simple ttyACM device like a teensy who is configured
// only as Serial at the device level like what was done for midi
//
// However some devices are a compisit of multiple Interfaces, so see if this Interface
// is of the CDC Interface class and 0 for SubClass and protocol
// Todo: some of this can maybe be combined with the Whole device code above.
if (descriptors[0] != 9 || descriptors[1] != 4) return false; // interface descriptor
if (descriptors[4] < 2) return false; // less than 2 end points
if (descriptors[5] != 0xA) return false; // bInterfaceClass, 0xa = CDC data
if (descriptors[6] != 0) return false; // bInterfaceSubClass
if (descriptors[7] != 0) return false; // bInterfaceProtocol

if (descriptors[9] != 7) return false; // length 7
if (descriptors[10] != 5) return false; // ep desc
uint32_t txep = descriptors[11];
uint32_t txsize = descriptors[13];
if (descriptors[12] != 2) return false; // bulk type
if (descriptors[13] > 64) return false; // size 64 Max
if (descriptors[14] != 0) return false;

if (descriptors[16] != 7) return false; // length 7
if (descriptors[17] != 5) return false; // ep desc
uint32_t rxep = descriptors[18];
uint32_t rxsize = descriptors[20];
if (descriptors[19] != 2) return false; // bulk type
if (descriptors[20] > 64) return false; // size 64 Max
if (descriptors[21] != 0) return false;
descriptor_index += 7; // setup to look at next one...
}
// Try to verify the end points.
if (!check_rxtx_ep(rxep, txep)) return false;
interface = descriptors[2];
print("USBSerial, rxep=", rxep & 15);
print("(", rx_size);
print("), txep=", txep);
print("(", tx_size);
println(")");

if (!init_buffers(rx_size, tx_size)) return false;
println(" rx buffer size:", rxsize);
println(" tx buffer size:", txsize);

print("CDC, rxep=", rxep & 15);
println(", txep=", txep);
if (!init_buffers(rxsize, txsize)) return false;
rxpipe = new_Pipe(dev, 2, rxep & 15, 1, rxsize);
rxpipe = new_Pipe(dev, 2, rxep & 15, 1, rx_size);
if (!rxpipe) return false;
txpipe = new_Pipe(dev, 2, txep, 0, txsize);
txpipe = new_Pipe(dev, 2, txep, 0, tx_size);
if (!txpipe) {
// TODO: free rxpipe
//free_Pipe(rxpipe);
return false;
}
sertype = CDCACM;
rxpipe->callback_function = rx_callback;
queue_Data_Transfer(rxpipe, rx1, 64, this);
queue_Data_Transfer(rxpipe, rx1, rx_size, this);
rxstate = 1;
if (rxsize > 128) {
queue_Data_Transfer(rxpipe, rx2, 64, this);
rxstate = 3;
}
txstate = 0;
txpipe->callback_function = tx_callback;

// See if we can do just the inteface...
baudrate = 115200;
println("Control - CDCACM LINE_CODING");
setupdata[0] = 0; // Setup baud rate 115200 - 0x1C200
setupdata[1] = 0xc2;
setupdata[2] = 0x1;
setupdata[3] = 0;
setupdata[4] = 0; // 0 - 1 stop bit, 1 - 1.5 stop bits, 2 - 2 stop bits
setupdata[5] = 0; // 0 - None, 1 - Odd, 2 - Even, 3 - Mark, 4 - Space
setupdata[6] = 8; // Data bits (5, 6, 7, 8 or 16)
mk_setup(setup, 0x21, 0x20, 0, 0, 7);
queue_Control_Transfer(dev, &setup, setupdata, this);
pending_control = 0x04; // Maybe don't need to do...
control_queued = true;
return true;

// Now do specific setup per type
switch (sertype) {
//---------------------------------------------------------------------
// FTDI
case FTDI:
{
pending_control = 0x0F;
mk_setup(setup, 0x40, 0, 0, 0, 0); // reset port
queue_Control_Transfer(dev, &setup, NULL, this);
control_queued = true;
return true;
}
//------------------------------------------------------------------------
// Prolific
// TODO: Note: there are probably more vendor/product pairs.. Maybe should create table of them
case PL2303:
{
// First attempt keep it simple...
println("PL2303: readRegister(0x04)");
// Need to setup the data the line coding data
mk_setup(setup, 0xC0, 0x1, 0x8484, 0, 1);
queue_Control_Transfer(dev, &setup, setupdata, this);
control_queued = true;
setup_state = 1; // We are at step one of setup...
pending_control = 0x3f;
return true;
}
//------------------------------------------------------------------------
// CH341
case CH341:
{
println("CH341: 0xC0, 0x5f, 0, 0, 8");
// Need to setup the data the line coding data
mk_setup(setup, 0xC0, 0x5f, 0, 0, sizeof(setupdata));
queue_Control_Transfer(dev, &setup, setupdata, this);
control_queued = true;
setup_state = 1; // We are at step one of setup...
pending_control = 0x7f;
return true;
}
//------------------------------------------------------------------------
// CP210X
case CP210X:
{
println("CP210X: 0x41, 0x11, 0, 0, 0 - reset port");
// Need to setup the data the line coding data
mk_setup(setup, 0x41, 0x11, 0, 0, 0);
queue_Control_Transfer(dev, &setup, NULL, this);
control_queued = true;
setup_state = 1; // We are at step one of setup...
pending_control = 0xf;
return true;
}
case CDCACM:
{
println("Control - CDCACM LINE_CODING");
setupdata[0] = 0; // Setup baud rate 115200 - 0x1C200
setupdata[1] = 0xc2;
setupdata[2] = 0x1;
setupdata[3] = 0;
setupdata[4] = 0; // 0 - 1 stop bit, 1 - 1.5 stop bits, 2 - 2 stop bits
setupdata[5] = 0; // 0 - None, 1 - Odd, 2 - Even, 3 - Mark, 4 - Space
setupdata[6] = 8; // Data bits (5, 6, 7, 8 or 16)
mk_setup(setup, 0x21, 0x20, 0, 0, 7);
queue_Control_Transfer(dev, &setup, setupdata, this);
pending_control = 0x04; // Maybe don't need to do...
control_queued = true;
return true;
}
//------------------------------------------------------------------------
// PID:VID - not in our product list.
default:
break;
}
return false;
}

// check if two legal endpoints, 1 receive & 1 transmit
bool USBSerial::check_rxtx_ep(uint32_t &rxep, uint32_t &txep)
bool USBSerialBase::check_rxtx_ep(uint32_t &rxep, uint32_t &txep)
{
if ((rxep & 0x0F) == 0) return false;
if ((txep & 0x0F) == 0) return false;
@@ -427,18 +408,18 @@ bool USBSerial::check_rxtx_ep(uint32_t &rxep, uint32_t &txep)
}

// initialize buffer sizes and pointers
bool USBSerial::init_buffers(uint32_t rsize, uint32_t tsize)
bool USBSerialBase::init_buffers(uint32_t rsize, uint32_t tsize)
{
// buffer must be able to hold 2 of each packet, plus buffer
// space to hold RX and TX data.
if (sizeof(bigbuffer) < (rsize + tsize) * 3 + 2) return false;
rx1 = (uint8_t *)bigbuffer;
if (_big_buffer_size < (rsize + tsize) * 3 + 2) return false;
rx1 = (uint8_t *)_bigBuffer;
rx2 = rx1 + rsize;
tx1 = rx2 + rsize;
tx2 = tx1 + tsize;
rxbuf = tx2 + tsize;
// FIXME: this assume 50-50 split - not true when rsize != tsize
rxsize = (sizeof(bigbuffer) - (rsize + tsize) * 2) / 2;
rxsize = (_big_buffer_size - (rsize + tsize) * 2) / 2;
txsize = rxsize;
txbuf = rxbuf + rxsize;
rxhead = 0;
@@ -449,13 +430,13 @@ bool USBSerial::init_buffers(uint32_t rsize, uint32_t tsize)
return true;
}

void USBSerial::disconnect()
void USBSerialBase::disconnect()
{
}



void USBSerial::control(const Transfer_t *transfer)
void USBSerialBase::control(const Transfer_t *transfer)
{
println("control callback (serial) ", pending_control, HEX);
control_queued = false;
@@ -927,7 +908,7 @@ void USBSerial::control(const Transfer_t *transfer)

#define CH341_BAUDBASE_FACTOR 1532620800
#define CH341_BAUDBASE_DIVMAX 3
void USBSerial::ch341_setBaud(uint8_t byte_index) {
void USBSerialBase::ch341_setBaud(uint8_t byte_index) {
if (byte_index == 0) {
uint32_t factor;
uint16_t divisor;
@@ -962,20 +943,20 @@ void USBSerial::ch341_setBaud(uint8_t byte_index) {
// Interrupt-based Data Movement
/************************************************************/

void USBSerial::rx_callback(const Transfer_t *transfer)
void USBSerialBase::rx_callback(const Transfer_t *transfer)
{
if (!transfer->driver) return;
((USBSerial *)(transfer->driver))->rx_data(transfer);
}

void USBSerial::tx_callback(const Transfer_t *transfer)
void USBSerialBase::tx_callback(const Transfer_t *transfer)
{
if (!transfer->driver) return;
((USBSerial *)(transfer->driver))->tx_data(transfer);
}


void USBSerial::rx_data(const Transfer_t *transfer)
void USBSerialBase::rx_data(const Transfer_t *transfer)
{
uint32_t len = transfer->length - ((transfer->qtd.token >> 16) & 0x7FFF);

@@ -1035,7 +1016,7 @@ void USBSerial::rx_data(const Transfer_t *transfer)
}

// re-queue packet buffer(s) if possible
void USBSerial::rx_queue_packets(uint32_t head, uint32_t tail)
void USBSerialBase::rx_queue_packets(uint32_t head, uint32_t tail)
{
uint32_t avail;
if (head >= tail) {
@@ -1064,7 +1045,7 @@ void USBSerial::rx_queue_packets(uint32_t head, uint32_t tail)
}
}

void USBSerial::tx_data(const Transfer_t *transfer)
void USBSerialBase::tx_data(const Transfer_t *transfer)
{
uint32_t mask;
uint8_t *p = (uint8_t *)transfer->buffer;
@@ -1120,9 +1101,9 @@ void USBSerial::tx_data(const Transfer_t *transfer)
debugDigitalWrite(5, LOW);
}

void USBSerial::flush()
void USBSerialBase::flush()
{
print("USBSerial::flush");
print("USBSerialBase::flush");
if (txhead == txtail) {
println(" - Empty");
return; // empty.
@@ -1140,7 +1121,7 @@ void USBSerial::flush()



void USBSerial::timer_event(USBDriverTimer *whichTimer)
void USBSerialBase::timer_event(USBDriverTimer *whichTimer)
{
debugDigitalWrite(7, HIGH);
println("txtimer");
@@ -1205,7 +1186,7 @@ void USBSerial::timer_event(USBDriverTimer *whichTimer)
// User Functions - must disable USBHQ IRQ for EHCI access
/************************************************************/

void USBSerial::begin(uint32_t baud, uint32_t format)
void USBSerialBase::begin(uint32_t baud, uint32_t format)
{
NVIC_DISABLE_IRQ(IRQ_USBHS);
baudrate = baud;
@@ -1227,7 +1208,7 @@ void USBSerial::begin(uint32_t baud, uint32_t format)
}
}

void USBSerial::end(void)
void USBSerialBase::end(void)
{
NVIC_DISABLE_IRQ(IRQ_USBHS);
switch (sertype) {
@@ -1246,7 +1227,7 @@ void USBSerial::end(void)
}
}

int USBSerial::available(void)
int USBSerialBase::available(void)
{
if (!device) return 0;
uint32_t head = rxhead;
@@ -1255,7 +1236,7 @@ int USBSerial::available(void)
return rxsize + head - tail;
}

int USBSerial::peek(void)
int USBSerialBase::peek(void)
{
if (!device) return -1;
uint32_t head = rxhead;
@@ -1265,7 +1246,7 @@ int USBSerial::peek(void)
return rxbuf[tail];
}

int USBSerial::read(void)
int USBSerialBase::read(void)
{
if (!device) return -1;
uint32_t head = rxhead;
@@ -1282,7 +1263,7 @@ int USBSerial::read(void)
return c;
}

int USBSerial::availableForWrite()
int USBSerialBase::availableForWrite()
{
if (!device) return 0;
uint32_t head = txhead;
@@ -1291,7 +1272,7 @@ int USBSerial::availableForWrite()
return tail - head - 1;
}

size_t USBSerial::write(uint8_t c)
size_t USBSerialBase::write(uint8_t c)
{
if (!device) return 0;
uint32_t head = txhead;

Write Preview
Loading…
取消
儲存