visus
/
teensy-usbhost
Volgen 1
Ster 0
Vork 0
Code Kwesties 0 Pull-aanvragen 0 Publicaties 0 Wiki Activiteit
Bladeren bron

Updated joystickbt

main
Mike S 5 jaren geleden
bovenliggende
ef80eefc1d
commit
8ce1fbc384
3 gewijzigde bestanden met toevoegingen van 146 en 108 verwijderingen
Zij-aan-zij weergave Toon Diff Stats
  1. +136
    -100
      examples/Bluetooth/JoystickBT/JoystickBT.ino
  2. +9
    -7
      examples/Bluetooth/JoystickBT/helperPS.ino
  3. +1
    -1
      joystick.cpp

+ 136
- 100
examples/Bluetooth/JoystickBT/JoystickBT.ino Bestand weergeven

@@ -15,30 +15,18 @@ USBHIDParser hid3(myusb);
USBHIDParser hid4(myusb);
USBHIDParser hid5(myusb);
JoystickController joystick1(myusb);
/* For PS3 controller it must be USB paired in advance -
* - plug in cable to PS3 - then Bt Dongle to see non-zero
* BDADDR:
* To initiate Bt pair - while on USB:: Hold select button and
* press PS button to set controller associate. After that you can
* comment out the bluetooth paring construcor and use second
* constructor for already paired devices
*/
//BluetoothController bluet(myusb, true, "0000"); // Version does pairing to device
BluetoothController bluet(myusb); // version assumes it already was paired
int user_axis[64];
uint32_t buttons_prev = 0;
uint32_t buttons;

float pitch, roll;
float ax, ay, az;

RawHIDController rawhid1(myusb);
RawHIDController rawhid2(myusb, 0xffc90004);

USBDriver *drivers[] = {&hub1, &hub2, &joystick1, &bluet, &hid1, &hid2, &hid3, &hid4, &hid5};

#define CNT_DEVICES (sizeof(drivers)/sizeof(drivers[0]))
const char * driver_names[CNT_DEVICES] = {"Hub1","Hub2", "JOY1D", "Bluet", "HID1" , "HID2", "HID3", "HID4", "HID5"};
const char * driver_names[CNT_DEVICES] = {"Hub1", "Hub2", "JOY1D", "Bluet", "HID1" , "HID2", "HID3", "HID4", "HID5"};

bool driver_active[CNT_DEVICES] = {false, false, false, false};

@@ -49,21 +37,24 @@ USBHIDInput *hiddrivers[] = {&joystick1, &rawhid1, &rawhid2};
const char * hid_driver_names[CNT_DEVICES] = {"Joystick1", "RawHid1", "RawHid2"};

bool hid_driver_active[CNT_DEVICES] = {false, false, false};
bool show_changed_only = false;
bool show_changed_only = false;
bool show_raw_data = false;
bool show_changed_data = false;

uint8_t joystick_left_trigger_value = 0;
uint8_t joystick_right_trigger_value = 0;
uint64_t joystick_full_notify_mask = (uint64_t)-1;
uint64_t joystick_full_notify_mask = (uint64_t) - 1;

int psAxis[64];
bool first_joystick_message = true;
uint8_t last_bdaddr[6]={0,0,0,0,0,0};
uint8_t last_bdaddr[6] = {0, 0, 0, 0, 0, 0};

void setup()
{

Serial1.begin(2000000);
while (!Serial) ; // wait for Arduino Serial Monitor

Serial.println("\n\nUSB Host Testing");
Serial.println(sizeof(USBHub), DEC);
myusb.begin();
@@ -78,10 +69,10 @@ void setup()
void loop()
{
myusb.Task();
if (Serial.available()) {
int ch = Serial.read(); // get the first char.
while (Serial.read() != -1) ;
int ch = Serial.read(); // get the first char.
while (Serial.read() != -1) ;
if ((ch == 'b') || (ch == 'B')) {
Serial.println("Only notify on Basic Axis changes");
joystick1.axisChangeNotifyMask(0x3ff);
@@ -98,7 +89,7 @@ void loop()
Serial.println("\n*** Show only changed fields mode ***");
}
}
}
}

for (uint8_t i = 0; i < CNT_DEVICES; i++) {
if (*drivers[i] != driver_active[i]) {
@@ -119,8 +110,8 @@ void loop()
if (drivers[i] == &bluet) {
const uint8_t *bdaddr = bluet.myBDAddr();
// remember it...
Serial.printf(" BDADDR: %x:%x:%x:%x:%x:%x\n", bdaddr[5], bdaddr[4], bdaddr[3], bdaddr[2], bdaddr[1], bdaddr[0]);
for (uint8_t i=0;i<6;i++) last_bdaddr[i] = bdaddr[i];
Serial.printf(" BDADDR: %x:%x:%x:%x:%x:%x\n", bdaddr[0], bdaddr[1], bdaddr[2], bdaddr[3], bdaddr[4], bdaddr[5]);
for (uint8_t i = 0; i < 6; i++) last_bdaddr[i] = bdaddr[i];
}
}
}
@@ -146,53 +137,55 @@ void loop()
}

if (joystick1.available()) {
if (first_joystick_message) {
Serial.printf("*** First Joystick message %x:%x ***\n",
joystick1.idVendor(), joystick1.idProduct());
first_joystick_message = false;
if (first_joystick_message) {
Serial.printf("*** First Joystick message %x:%x ***\n",
joystick1.idVendor(), joystick1.idProduct());
first_joystick_message = false;

const uint8_t *psz = joystick1.manufacturer();
if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz);
psz = joystick1.product();
if (psz && *psz) Serial.printf(" product: %s\n", psz);
psz = joystick1.serialNumber();
if (psz && *psz) Serial.printf(" Serial: %s\n", psz);

// lets try to reduce number of fields that update
joystick1.axisChangeNotifyMask(0xFFFFFl);
}

const uint8_t *psz = joystick1.manufacturer();
if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz);
psz = joystick1.product();
if (psz && *psz) Serial.printf(" product: %s\n", psz);
psz =joystick1.serialNumber();
if (psz && *psz) Serial.printf(" Serial: %s\n", psz);
for (uint8_t i = 0; i < 64; i++) {
psAxis[i] = joystick1.getAxis(i);
}
switch (joystick1.joystickType()) {
case JoystickController::UNKNOWN:
case JoystickController::PS4:
displayPS4Data();
break;
case JoystickController::PS3:
displayPS3Data();
break;
case JoystickController::XBOXONE:
case JoystickController::XBOX360:
displayXBoxData();
break;
default:
displayRawData();
break;
}
//for (uint8_t i = 0; i < 24; i++) {
// Serial.printf(" %d:%d", i, psAxis[i]);
//}
//Serial.println();

// lets try to reduce number of fields that update
joystick1.axisChangeNotifyMask(0xFFFFFl);
}
for (uint8_t i = 0; i<64; i++) {
psAxis[i] = joystick1.getAxis(i);
}
switch (joystick1.joystickType()) {
case JoystickController::UNKNOWN:
case JoystickController::PS4:
displayPS4Data();
break;
case JoystickController::PS3:
displayPS3Data();
break;
default:
case JoystickController::XBOXONE:
case JoystickController::XBOX360:;
displayRawData();
break;
}
//for (uint8_t i = 0; i < 24; i++) {
// Serial.printf(" %d:%d", i, psAxis[i]);
//}
//Serial.println();
delay(100);
joystick1.joystickDataClear();
delay(100);
joystick1.joystickDataClear();
}

// See if we have some RAW data
if (rawhid1) {
int ch;
uint8_t buffer[64];
uint8_t count_chars = 0;
uint8_t count_chars = 0;
memset(buffer, 0, sizeof(buffer));
if (Serial.available()) {
while (((ch = Serial.read()) != -1) && (count_chars < sizeof(buffer))) {
@@ -216,15 +209,15 @@ void displayPS4Data()
uint8_t ltv;
uint8_t rtv;

ltv = psAxis[3];
rtv = psAxis[4];
ltv = psAxis[3];
rtv = psAxis[4];

if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) {
joystick_left_trigger_value = ltv;
joystick_right_trigger_value = rtv;
Serial.printf("Rumbling: %d, %d\r\n", ltv, rtv);
joystick1.setRumble(ltv, rtv);
}
if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) {
joystick_left_trigger_value = ltv;
joystick_right_trigger_value = rtv;
Serial.printf("Rumbling: %d, %d\r\n", ltv, rtv);
joystick1.setRumble(ltv, rtv);
}

if (buttons != buttons_prev) {
@@ -261,7 +254,7 @@ void displayPS3Data()
if ((buttons & 0x02) && !(buttons_prev & 0x02)) show_raw_data = !show_raw_data;
if ((buttons & 0x04) && !(buttons_prev & 0x04)) show_changed_data = !show_changed_data;

// See about maybe pair...
// See about maybe pair...
if ((buttons & 0x10000) && !(buttons_prev & 0x10000) && (buttons & 0x0001)) {
// PS button just pressed and select button pressed act like PS4 share like...
Serial.print("\nPS3 Pairing Request");
@@ -270,7 +263,7 @@ void displayPS3Data()
} else if (!hiddrivers[0]) { // Kludge see if we are connected as HID?
Serial.println(" - failed - PS3 device not plugged into USB");
} else {
Serial.printf(" - Attempt pair to: %x:%x:%x:%x:%x:%x\n", last_bdaddr[5], last_bdaddr[4], last_bdaddr[3], last_bdaddr[2], last_bdaddr[1], last_bdaddr[0]);
Serial.printf(" - Attempt pair to: %x:%x:%x:%x:%x:%x\n", last_bdaddr[0], last_bdaddr[1], last_bdaddr[2], last_bdaddr[3], last_bdaddr[4], last_bdaddr[5]);

if (! joystick1.PS3Pair(last_bdaddr)) {
Serial.println(" Pairing call Failed");
@@ -278,7 +271,7 @@ void displayPS3Data()
Serial.println(" Pairing complete (I hope), make sure Bluetooth adapter is plugged in and try PS3 without USB");
}
}
}
}


if (show_raw_data) {
@@ -288,41 +281,83 @@ void displayPS3Data()
Serial.printf("L-Trig: %d, R-Trig: %d\r\n", psAxis[3], psAxis[4]);
Serial.printf("Buttons: %x\r\n", buttons);
}
uint8_t ltv;
uint8_t rtv;
uint8_t ltv;
uint8_t rtv;

ltv = psAxis[3];
rtv = psAxis[4];
ltv = psAxis[3];
rtv = psAxis[4];

if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) {
joystick_left_trigger_value = ltv;
joystick_right_trigger_value = rtv;
Serial.printf("Rumbling: %d, %d\r\n", ltv, rtv);
joystick1.setRumble(ltv, rtv, 50);
}
if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) {
joystick_left_trigger_value = ltv;
joystick_right_trigger_value = rtv;
Serial.printf("Rumbling: %d, %d\r\n", ltv, rtv);
joystick1.setRumble(ltv, rtv);
}

if (buttons != buttons_prev) {
uint8_t leds = 0;
if (buttons & 0x8000) leds = 1; //Srq
if (buttons & 0x2000) leds = 2; //Cir
if (buttons & 0x1000) leds = 4; //Tri
if (buttons & 0x4000) leds = 8; //X joystick1.setLEDs(leds);
buttons_prev = buttons;
if (buttons != buttons_prev) {
uint8_t leds = 0;
if (buttons & 0x8000) leds = 1; //Srq
if (buttons & 0x2000) leds = 2; //Cir
if (buttons & 0x1000) leds = 3; //Tri
//Cross = 2
joystick1.setLEDs(leds);
buttons_prev = buttons;
}
}

void displayXBoxData()
{
buttons = joystick1.getButtons();

// Use L3 (Left joystick button) to toggle Show Raw or not...
if ((buttons & 0x4000) && !(buttons_prev & 0x4000)) show_raw_data = !show_raw_data;
if ((buttons & 0x8000) && !(buttons_prev & 0x8000)) show_changed_data = !show_changed_data;

if (show_raw_data) {
displayRawData();
} else {
Serial.printf("LX: %d, LY: %d, RX: %d, RY: %d \r\n", psAxis[0], psAxis[1], psAxis[2], psAxis[5]);
Serial.printf("L-Trig: %d, R-Trig: %d\r\n", psAxis[3], psAxis[4]);
Serial.printf("Buttons: %x\r\n", buttons);
}
uint8_t ltv;
uint8_t rtv;

ltv = psAxis[3];
rtv = psAxis[4];

if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) {
joystick_left_trigger_value = ltv;
joystick_right_trigger_value = rtv;
Serial.printf("Rumbling: %d, %d\r\n", ltv, rtv);
joystick1.setRumble(ltv, rtv);
}

if (buttons != buttons_prev) {
uint8_t leds = 0;
if (buttons & 0x8000) leds = 1; //Srq
if (buttons & 0x2000) leds = 2; //Cir
if (buttons & 0x1000) leds = 3; //Tri
//Cross = 2
joystick1.setLEDs(leds);
buttons_prev = buttons;
}
}

void displayRawData() {
uint64_t axis_mask = joystick1.axisMask();
uint64_t changed_mask = joystick1.axisChangedMask();
if (!changed_mask) return;

buttons = joystick1.getButtons();

if (!changed_mask && (buttons == buttons_prev)) return;

if (show_changed_data) {
if (!changed_mask) return;
changed_mask &= 0xfffffffffL; // try reducing which ones show...
Serial.printf("%0x - ", joystick1.getButtons());

for (uint16_t index=0; changed_mask; index++) {
for (uint16_t index = 0; changed_mask; index++) {
if (changed_mask & 1) {
Serial.printf("%d:%02x ", index, psAxis[index]);
}
@@ -333,22 +368,23 @@ void displayRawData() {
axis_mask &= 0xffffff;
Serial.printf("%06x%06x: %06x - ", (uint32_t)(changed_mask >> 32), (uint32_t)(changed_mask & 0xffffffff), joystick1.getButtons());

for (uint16_t index=0; axis_mask; index++) {
for (uint16_t index = 0; axis_mask; index++) {
Serial.printf("%02x ", psAxis[index]);
axis_mask >>= 1;
}
}
Serial.println();
Serial.println();
buttons_prev = buttons;

}


bool OnReceiveHidData(uint32_t usage, const uint8_t *data, uint32_t len) {
// Called for maybe both HIDS for rawhid basic test. One is for the Teensy
// to output to Serial. while still having Raw Hid...
// to output to Serial. while still having Raw Hid...
if (usage == 0xffc90004) {
// Lets trim off trailing null characters.
while ((len > 0) && (data[len-1] == 0)) {
while ((len > 0) && (data[len - 1] == 0)) {
len--;
}
if (len) {
@@ -359,7 +395,7 @@ bool OnReceiveHidData(uint32_t usage, const uint8_t *data, uint32_t len) {
Serial.print("RawHID data: ");
Serial.println(usage, HEX);
while (len) {
uint8_t cb = (len > 16)? 16 : len;
uint8_t cb = (len > 16) ? 16 : len;
const uint8_t *p = data;
uint8_t i;
for (i = 0; i < cb; i++) {
@@ -367,7 +403,7 @@ bool OnReceiveHidData(uint32_t usage, const uint8_t *data, uint32_t len) {
}
Serial.print(": ");
for (i = 0; i < cb; i++) {
Serial.write(((*data >= ' ')&&(*data <= '~'))? *data : '.');
Serial.write(((*data >= ' ') && (*data <= '~')) ? *data : '.');
data++;
}
len -= cb;
@@ -376,4 +412,4 @@ bool OnReceiveHidData(uint32_t usage, const uint8_t *data, uint32_t len) {
}

return true;
}
}

+ 9
- 7
examples/Bluetooth/JoystickBT/helperPS.ino Bestand weergeven

@@ -1,6 +1,8 @@
float pitch, roll;
float gx, gy, gz;
uint16_t xc, yc;
uint8_t isTouch;
float ax, ay, az;
int16_t xc_old, yc_old;

void printAngles(){
@@ -36,13 +38,13 @@ void getCoords(uint16_t &xc, uint16_t &yc, uint8_t &isTouch){
}

void getAccel( float &ax, float &ay, float &az){
int accelx = (int16_t)(psAxis[20]<<8) | psAxis[19];
int accelz = (int16_t)(psAxis[22]<<8) | psAxis[21];
int accely = (int16_t)(psAxis[24]<<8) | psAxis[23];
ax = (float) accelx/8192;
ay = (float) accely/8192;
az = (float) accelz/8192;
int accelx = (int16_t)(psAxis[20]<<8) | psAxis[19];
int accelz = (int16_t)(psAxis[22]<<8) | psAxis[21];
int accely = (int16_t)(psAxis[24]<<8) | psAxis[23];
ax = (float) accelx/8192;
ay = (float) accely/8192;
az = (float) accelz/8192;
}

void getAngles(float &p, float &r){

+ 1
- 1
joystick.cpp Bestand weergeven

@@ -27,7 +27,7 @@
#define print USBHost::print_
#define println USBHost::println_

#define DEBUG_JOYSTICK
//#define DEBUG_JOYSTICK
#ifdef DEBUG_JOYSTICK
#define DBGPrintf USBHDBGSerial.printf
#else

Schrijf Voorbeeld
Laden…
Annuleren
Opslaan