Paul Stoffregen
5 роки тому
46 змінених файлів з 17736 додано та 258 видалено
+ 290
- 35
USBHost_t36.h
Переглянути файл
| @@ -27,7 +27,7 @@ | |||
| #include <stdint.h> | |||
| #if !defined(__MK66FX1M0__) && !defined(__IMXRT1052__) && !defined(__IMXRT1062__) | |||
| #error "USBHost_t36 only works with Teensy 3.6. Please select it in Tools > Boards" | |||
| #error "USBHost_t36 only works with Teensy 3.6 or Teensy 4.x. Please select it in Tools > Boards" | |||
| #endif | |||
| #include "utility/imxrt_usbhs.h" | |||
| @@ -58,6 +58,13 @@ | |||
| //#define USBHOST_PRINT_DEBUG | |||
| //#define USBHDBGSerial Serial1 | |||
| #ifndef USBHDBGSerial | |||
| #define USBHDBGSerial Serial | |||
| #endif | |||
| /************************************************/ | |||
| /* Data Types */ | |||
| @@ -314,35 +321,35 @@ protected: | |||
| static void print_config_descriptor(const uint8_t *p, uint32_t maxlen); | |||
| static void print_string_descriptor(const char *name, const uint8_t *p); | |||
| static void print_hexbytes(const void *ptr, uint32_t len); | |||
| static void print_(const char *s) { Serial.print(s); } | |||
| static void print_(int n) { Serial.print(n); } | |||
| static void print_(unsigned int n) { Serial.print(n); } | |||
| static void print_(long n) { Serial.print(n); } | |||
| static void print_(unsigned long n) { Serial.print(n); } | |||
| static void println_(const char *s) { Serial.println(s); } | |||
| static void println_(int n) { Serial.println(n); } | |||
| static void println_(unsigned int n) { Serial.println(n); } | |||
| static void println_(long n) { Serial.println(n); } | |||
| static void println_(unsigned long n) { Serial.println(n); } | |||
| static void println_() { Serial.println(); } | |||
| static void print_(uint32_t n, uint8_t b) { Serial.print(n, b); } | |||
| static void println_(uint32_t n, uint8_t b) { Serial.println(n, b); } | |||
| static void print_(const char *s) { USBHDBGSerial.print(s); } | |||
| static void print_(int n) { USBHDBGSerial.print(n); } | |||
| static void print_(unsigned int n) { USBHDBGSerial.print(n); } | |||
| static void print_(long n) { USBHDBGSerial.print(n); } | |||
| static void print_(unsigned long n) { USBHDBGSerial.print(n); } | |||
| static void println_(const char *s) { USBHDBGSerial.println(s); } | |||
| static void println_(int n) { USBHDBGSerial.println(n); } | |||
| static void println_(unsigned int n) { USBHDBGSerial.println(n); } | |||
| static void println_(long n) { USBHDBGSerial.println(n); } | |||
| static void println_(unsigned long n) { USBHDBGSerial.println(n); } | |||
| static void println_() { USBHDBGSerial.println(); } | |||
| static void print_(uint32_t n, uint8_t b) { USBHDBGSerial.print(n, b); } | |||
| static void println_(uint32_t n, uint8_t b) { USBHDBGSerial.println(n, b); } | |||
| static void print_(const char *s, int n, uint8_t b = DEC) { | |||
| Serial.print(s); Serial.print(n, b); } | |||
| USBHDBGSerial.print(s); USBHDBGSerial.print(n, b); } | |||
| static void print_(const char *s, unsigned int n, uint8_t b = DEC) { | |||
| Serial.print(s); Serial.print(n, b); } | |||
| USBHDBGSerial.print(s); USBHDBGSerial.print(n, b); } | |||
| static void print_(const char *s, long n, uint8_t b = DEC) { | |||
| Serial.print(s); Serial.print(n, b); } | |||
| USBHDBGSerial.print(s); USBHDBGSerial.print(n, b); } | |||
| static void print_(const char *s, unsigned long n, uint8_t b = DEC) { | |||
| Serial.print(s); Serial.print(n, b); } | |||
| USBHDBGSerial.print(s); USBHDBGSerial.print(n, b); } | |||
| static void println_(const char *s, int n, uint8_t b = DEC) { | |||
| Serial.print(s); Serial.println(n, b); } | |||
| USBHDBGSerial.print(s); USBHDBGSerial.println(n, b); } | |||
| static void println_(const char *s, unsigned int n, uint8_t b = DEC) { | |||
| Serial.print(s); Serial.println(n, b); } | |||
| USBHDBGSerial.print(s); USBHDBGSerial.println(n, b); } | |||
| static void println_(const char *s, long n, uint8_t b = DEC) { | |||
| Serial.print(s); Serial.println(n, b); } | |||
| USBHDBGSerial.print(s); USBHDBGSerial.println(n, b); } | |||
| static void println_(const char *s, unsigned long n, uint8_t b = DEC) { | |||
| Serial.print(s); Serial.println(n, b); } | |||
| USBHDBGSerial.print(s); USBHDBGSerial.println(n, b); } | |||
| friend class USBDriverTimer; // for access to print & println | |||
| #else | |||
| static void print_(const Transfer_t *transfer) {} | |||
| @@ -517,12 +524,47 @@ private: | |||
| virtual void hid_input_end(); | |||
| virtual void disconnect_collection(Device_t *dev); | |||
| void add_to_list(); | |||
| USBHIDInput *next; | |||
| USBHIDInput *next = NULL; | |||
| friend class USBHIDParser; | |||
| protected: | |||
| Device_t *mydevice = NULL; | |||
| }; | |||
| // Device drivers may inherit from this base class, if they wish to receive | |||
| // HID input like data from Bluetooth HID device. | |||
| class BluetoothController; | |||
| class BTHIDInput { | |||
| public: | |||
| operator bool() { return (btdevice != nullptr); } | |||
| uint16_t idVendor() { return (btdevice != nullptr) ? btdevice->idVendor : 0; } | |||
| uint16_t idProduct() { return (btdevice != nullptr) ? btdevice->idProduct : 0; } | |||
| const uint8_t *manufacturer() | |||
| { return ((btdevice == nullptr) || (btdevice->strbuf == nullptr)) ? nullptr : &btdevice->strbuf->buffer[btdevice->strbuf->iStrings[strbuf_t::STR_ID_MAN]]; } | |||
| const uint8_t *product() | |||
| { return remote_name_; } | |||
| const uint8_t *serialNumber() | |||
| { return ((btdevice == nullptr) || (btdevice->strbuf == nullptr)) ? nullptr : &btdevice->strbuf->buffer[btdevice->strbuf->iStrings[strbuf_t::STR_ID_SERIAL]]; } | |||
| private: | |||
| virtual bool claim_bluetooth(BluetoothController *driver, uint32_t bluetooth_class, uint8_t *remoteName) {return false;} | |||
| virtual bool process_bluetooth_HID_data(const uint8_t *data, uint16_t length) {return false;} | |||
| virtual void release_bluetooth() {}; | |||
| virtual bool remoteNameComplete(const uint8_t *remoteName) {return true;} | |||
| virtual void connectionComplete(void) {}; | |||
| void add_to_list(); | |||
| BTHIDInput *next = NULL; | |||
| friend class BluetoothController; | |||
| protected: | |||
| enum {SP_NEED_CONNECT=0x1, SP_DONT_NEED_CONNECT=0x02, SP_PS3_IDS=0x4}; | |||
| enum {REMOTE_NAME_SIZE=32}; | |||
| uint8_t special_process_required = 0; | |||
| Device_t *btdevice = NULL; | |||
| uint8_t remote_name_[REMOTE_NAME_SIZE] = {0}; | |||
| }; | |||
| /************************************************/ | |||
| /* USB Device Drivers */ | |||
| /************************************************/ | |||
| @@ -652,7 +694,7 @@ private: | |||
| uint16_t in_size; | |||
| uint16_t out_size; | |||
| setup_t setup; | |||
| uint8_t descriptor[512]; | |||
| uint8_t descriptor[800]; | |||
| uint8_t report[64]; | |||
| uint16_t descsize; | |||
| bool use_report_id; | |||
| @@ -667,7 +709,7 @@ private: | |||
| //-------------------------------------------------------------------------- | |||
| class KeyboardController : public USBDriver , public USBHIDInput { | |||
| class KeyboardController : public USBDriver , public USBHIDInput, public BTHIDInput { | |||
| public: | |||
| typedef union { | |||
| struct { | |||
| @@ -691,8 +733,7 @@ public: | |||
| const uint8_t *product(); | |||
| const uint8_t *serialNumber(); | |||
| // Some methods are in both public classes so we need to figure out which one to use | |||
| operator bool() { return (device != nullptr); } | |||
| operator bool() { return ((device != nullptr) || (btdevice != nullptr)); } | |||
| // Main boot keyboard functions. | |||
| uint16_t getKey() { return keyCode; } | |||
| uint8_t getModifiers() { return modifiers; } | |||
| @@ -724,6 +765,13 @@ protected: | |||
| void new_data(const Transfer_t *transfer); | |||
| void init(); | |||
| // Bluetooth data | |||
| virtual bool claim_bluetooth(BluetoothController *driver, uint32_t bluetooth_class, uint8_t *remoteName); | |||
| virtual bool process_bluetooth_HID_data(const uint8_t *data, uint16_t length); | |||
| virtual bool remoteNameComplete(const uint8_t *remoteName); | |||
| virtual void release_bluetooth(); | |||
| protected: // HID functions for extra keyboard data. | |||
| virtual hidclaim_t claim_collection(USBHIDParser *driver, Device_t *dev, uint32_t topusage); | |||
| virtual void hid_input_begin(uint32_t topusage, uint32_t type, int lgmin, int lgmax); | |||
| @@ -764,9 +812,9 @@ private: | |||
| }; | |||
| class MouseController : public USBHIDInput { | |||
| class MouseController : public USBHIDInput, public BTHIDInput { | |||
| public: | |||
| MouseController(USBHost &host) { USBHIDParser::driver_ready_for_hid_collection(this); } | |||
| MouseController(USBHost &host) { init(); } | |||
| bool available() { return mouseEvent; } | |||
| void mouseDataClear(); | |||
| uint8_t getButtons() { return buttons; } | |||
| @@ -780,7 +828,17 @@ protected: | |||
| virtual void hid_input_data(uint32_t usage, int32_t value); | |||
| virtual void hid_input_end(); | |||
| virtual void disconnect_collection(Device_t *dev); | |||
| // Bluetooth data | |||
| virtual bool claim_bluetooth(BluetoothController *driver, uint32_t bluetooth_class, uint8_t *remoteName); | |||
| virtual bool process_bluetooth_HID_data(const uint8_t *data, uint16_t length); | |||
| virtual void release_bluetooth(); | |||
| private: | |||
| void init(); | |||
| BluetoothController *btdriver_ = nullptr; | |||
| uint8_t collections_claimed = 0; | |||
| volatile bool mouseEvent = false; | |||
| volatile bool hid_input_begin_ = false; | |||
| @@ -793,7 +851,44 @@ private: | |||
| //-------------------------------------------------------------------------- | |||
| class JoystickController : public USBDriver, public USBHIDInput { | |||
| class DigitizerController : public USBHIDInput, public BTHIDInput { | |||
| public: | |||
| DigitizerController(USBHost &host) { init(); } | |||
| bool available() { return digitizerEvent; } | |||
| void digitizerDataClear(); | |||
| uint8_t getButtons() { return buttons; } | |||
| int getMouseX() { return mouseX; } | |||
| int getMouseY() { return mouseY; } | |||
| int getWheel() { return wheel; } | |||
| int getWheelH() { return wheelH; } | |||
| int getAxis(uint32_t index) { return (index < (sizeof(digiAxes)/sizeof(digiAxes[0]))) ? digiAxes[index] : 0; } | |||
| protected: | |||
| virtual hidclaim_t claim_collection(USBHIDParser *driver, Device_t *dev, uint32_t topusage); | |||
| virtual void hid_input_begin(uint32_t topusage, uint32_t type, int lgmin, int lgmax); | |||
| virtual void hid_input_data(uint32_t usage, int32_t value); | |||
| virtual void hid_input_end(); | |||
| virtual void disconnect_collection(Device_t *dev); | |||
| private: | |||
| void init(); | |||
| uint8_t collections_claimed = 0; | |||
| volatile bool digitizerEvent = false; | |||
| volatile bool hid_input_begin_ = false; | |||
| uint8_t buttons = 0; | |||
| int mouseX = 0; | |||
| int mouseY = 0; | |||
| int wheel = 0; | |||
| int wheelH = 0; | |||
| int digiAxes[16]; | |||
| }; | |||
| //-------------------------------------------------------------------------- | |||
| class JoystickController : public USBDriver, public USBHIDInput, public BTHIDInput { | |||
| public: | |||
| JoystickController(USBHost &host) { init(); } | |||
| @@ -803,7 +898,7 @@ public: | |||
| const uint8_t *manufacturer(); | |||
| const uint8_t *product(); | |||
| const uint8_t *serialNumber(); | |||
| operator bool() { return (((device != nullptr) || (mydevice != nullptr)) && connected_); } // override as in both USBDriver and in USBHIDInput | |||
| operator bool() { return (((device != nullptr) || (mydevice != nullptr || (btdevice != nullptr))) && connected_); } // override as in both USBDriver and in USBHIDInput | |||
| bool available() { return joystickEvent; } | |||
| void joystickDataClear(); | |||
| @@ -816,11 +911,18 @@ public: | |||
| // set functions functionality depends on underlying joystick. | |||
| bool setRumble(uint8_t lValue, uint8_t rValue, uint8_t timeout=0xff); | |||
| // setLEDs on PS4(RGB), PS3 simple LED setting (only uses lr) | |||
| bool setLEDs(uint8_t lr, uint8_t lg=0, uint8_t lb=0); // sets Leds, | |||
| // setLEDs on PS4(RGB), PS3 simple LED setting (only uses lb) | |||
| bool setLEDs(uint8_t lr, uint8_t lg, uint8_t lb); // sets Leds, | |||
| bool inline setLEDs(uint32_t leds) {return setLEDs((leds >> 16) & 0xff, (leds >> 8) & 0xff, leds & 0xff);} // sets Leds - passing one arg for all leds | |||
| enum { STANDARD_AXIS_COUNT = 10, ADDITIONAL_AXIS_COUNT = 54, TOTAL_AXIS_COUNT = (STANDARD_AXIS_COUNT+ADDITIONAL_AXIS_COUNT) }; | |||
| typedef enum { UNKNOWN=0, PS3, PS4, XBOXONE, XBOX360} joytype_t; | |||
| joytype_t joystickType = UNKNOWN; | |||
| typedef enum { UNKNOWN=0, PS3, PS4, XBOXONE, XBOX360, PS3_MOTION, SpaceNav} joytype_t; | |||
| joytype_t joystickType() {return joystickType_;} | |||
| // PS3 pair function. hack, requires that it be connect4ed by USB and we have the address of the Bluetooth dongle... | |||
| bool PS3Pair(uint8_t* bdaddr); | |||
| protected: | |||
| // From USBDriver | |||
| virtual bool claim(Device_t *device, int type, const uint8_t *descriptors, uint32_t len); | |||
| @@ -834,14 +936,27 @@ protected: | |||
| virtual void hid_input_end(); | |||
| virtual void disconnect_collection(Device_t *dev); | |||
| virtual bool hid_process_out_data(const Transfer_t *transfer); | |||
| // Bluetooth data | |||
| virtual bool claim_bluetooth(BluetoothController *driver, uint32_t bluetooth_class, uint8_t *remoteName); | |||
| virtual bool process_bluetooth_HID_data(const uint8_t *data, uint16_t length); | |||
| virtual void release_bluetooth(); | |||
| virtual bool remoteNameComplete(const uint8_t *remoteName); | |||
| virtual void connectionComplete(void); | |||
| joytype_t joystickType_ = UNKNOWN; | |||
| private: | |||
| // Class specific | |||
| void init(); | |||
| USBHIDParser *driver_ = nullptr; | |||
| BluetoothController *btdriver_ = nullptr; | |||
| joytype_t mapVIDPIDtoJoystickType(uint16_t idVendor, uint16_t idProduct, bool exclude_hid_devices); | |||
| bool transmitPS4UserFeedbackMsg(); | |||
| bool transmitPS3UserFeedbackMsg(); | |||
| bool transmitPS3MotionUserFeedbackMsg(); | |||
| bool mapNameToJoystickType(const uint8_t *remoteName); | |||
| bool anychange = false; | |||
| volatile bool joystickEvent = false; | |||
| @@ -1596,4 +1711,144 @@ private: | |||
| }; | |||
| //-------------------------------------------------------------------------- | |||
| class BluetoothController: public USBDriver { | |||
| public: | |||
| BluetoothController(USBHost &host, bool pair = false, const char *pin = "0000") : do_pair_device_(pair), pair_pincode_(pin), delayTimer_(this) | |||
| { init(); } | |||
| enum {MAX_ENDPOINTS=4, NUM_SERVICES=4, }; // Max number of Bluetooth services - if you need more than 4 simply increase this number | |||
| enum {BT_CLASS_DEVICE= 0x0804}; // Toy - Robot | |||
| static void driver_ready_for_bluetooth(BTHIDInput *driver); | |||
| const uint8_t* myBDAddr(void) {return my_bdaddr_;} | |||
| // BUGBUG version to allow some of the controlled objects to call? | |||
| enum {CONTROL_SCID=-1, INTERRUPT_SCID=-2}; | |||
| void sendL2CapCommand(uint8_t* data, uint8_t nbytes, int channel = (int)0x0001); | |||
| protected: | |||
| virtual bool claim(Device_t *device, int type, const uint8_t *descriptors, uint32_t len); | |||
| virtual void control(const Transfer_t *transfer); | |||
| virtual void disconnect(); | |||
| virtual void timer_event(USBDriverTimer *whichTimer); | |||
| BTHIDInput * find_driver(uint32_t device_type, uint8_t *remoteName=nullptr); | |||
| // Hack to allow PS3 to maybe change values | |||
| uint16_t connection_rxid_ = 0; | |||
| uint16_t control_dcid_ = 0x70; | |||
| uint16_t interrupt_dcid_ = 0x71; | |||
| uint16_t interrupt_scid_; | |||
| uint16_t control_scid_; | |||
| private: | |||
| friend class BTHIDInput; | |||
| static void rx_callback(const Transfer_t *transfer); | |||
| static void rx2_callback(const Transfer_t *transfer); | |||
| static void tx_callback(const Transfer_t *transfer); | |||
| void rx_data(const Transfer_t *transfer); | |||
| void rx2_data(const Transfer_t *transfer); | |||
| void tx_data(const Transfer_t *transfer); | |||
| void init(); | |||
| // HCI support functions... | |||
| void sendHCICommand(uint16_t hciCommand, uint16_t cParams, const uint8_t* data); | |||
| //void sendHCIReadLocalSupportedFeatures(); | |||
| void inline sendHCI_INQUIRY(); | |||
| void inline sendHCIInquiryCancel(); | |||
| void inline sendHCICreateConnection(); | |||
| void inline sendHCIAuthenticationRequested(); | |||
| void inline sendHCIAcceptConnectionRequest(); | |||
| void inline sendHCILinkKeyNegativeReply(); | |||
| void inline sendHCIPinCodeReply(); | |||
| void inline sendResetHCI(); | |||
| void inline sendHDCWriteClassOfDev(); | |||
| void inline sendHCIReadBDAddr(); | |||
| void inline sendHCIReadLocalVersionInfo(); | |||
| void inline sendHCIWriteScanEnable(uint8_t scan_op); | |||
| void inline sendHCIHCIWriteInquiryMode(uint8_t inquiry_mode); | |||
| void inline sendHCISetEventMask(); | |||
| void inline sendHCIRemoteNameRequest(); | |||
| void inline sendHCIRemoteVersionInfoRequest(); | |||
| void handle_hci_command_complete(); | |||
| void handle_hci_command_status(); | |||
| void handle_hci_inquiry_result(bool fRSSI=false); | |||
| void handle_hci_extended_inquiry_result(); | |||
| void handle_hci_inquiry_complete(); | |||
| void handle_hci_incoming_connect(); | |||
| void handle_hci_connection_complete(); | |||
| void handle_hci_disconnect_complete(); | |||
| void handle_hci_authentication_complete(); | |||
| void handle_hci_remote_name_complete(); | |||
| void handle_hci_remote_version_information_complete(); | |||
| void handle_hci_pin_code_request(); | |||
| void handle_hci_link_key_notification(); | |||
| void handle_hci_link_key_request(); | |||
| void queue_next_hci_command(); | |||
| void sendl2cap_ConnectionResponse(uint16_t handle, uint8_t rxid, uint16_t dcid, uint16_t scid, uint8_t result); | |||
| void sendl2cap_ConnectionRequest(uint16_t handle, uint8_t rxid, uint16_t scid, uint16_t psm); | |||
| void sendl2cap_ConfigRequest(uint16_t handle, uint8_t rxid, uint16_t dcid); | |||
| void sendl2cap_ConfigResponse(uint16_t handle, uint8_t rxid, uint16_t scid); | |||
| void sendL2CapCommand(uint16_t handle, uint8_t* data, uint8_t nbytes, uint8_t channelLow = 0x01, uint8_t channelHigh = 0x00); | |||
| void process_l2cap_connection_request(uint8_t *data); | |||
| void process_l2cap_connection_response(uint8_t *data); | |||
| void process_l2cap_config_request(uint8_t *data); | |||
| void process_l2cap_config_response(uint8_t *data); | |||
| void process_l2cap_command_reject(uint8_t *data); | |||
| void process_l2cap_disconnect_request(uint8_t *data); | |||
| void setHIDProtocol(uint8_t protocol); | |||
| void handleHIDTHDRData(uint8_t *buffer); // Pass the whole buffer... | |||
| static BTHIDInput *available_bthid_drivers_list; | |||
| setup_t setup; | |||
| Pipe_t mypipes[4] __attribute__ ((aligned(32))); | |||
| Transfer_t mytransfers[7] __attribute__ ((aligned(32))); | |||
| strbuf_t mystring_bufs[2]; // 2 string buffers - one for our device - one for remote device... | |||
| uint16_t pending_control_ = 0; | |||
| uint16_t pending_control_tx_ = 0; | |||
| uint16_t rx_size_ = 0; | |||
| uint16_t rx2_size_ = 0; | |||
| uint16_t tx_size_ = 0; | |||
| Pipe_t *rxpipe_; | |||
| Pipe_t *rx2pipe_; | |||
| Pipe_t *txpipe_; | |||
| uint8_t rxbuf_[256]; // used to receive data from RX, which may come with several packets... | |||
| uint8_t rx_packet_data_remaining=0; // how much data remaining | |||
| uint8_t rx2buf_[64]; // receive buffer from Bulk end point | |||
| uint8_t txbuf_[256]; // buffer to use to send commands to bluetooth | |||
| uint8_t hciVersion; // what version of HCI do we have? | |||
| bool do_pair_device_; // Should we do a pair for a new device? | |||
| const char *pair_pincode_; // What pin code to use for the pairing | |||
| USBDriverTimer delayTimer_; | |||
| uint8_t my_bdaddr_[6]; // The bluetooth dongles Bluetooth address. | |||
| uint8_t features[8]; // remember our local features. | |||
| BTHIDInput * device_driver_ = nullptr;; | |||
| uint8_t device_bdaddr_[6];// remember devices address | |||
| uint8_t device_ps_repetion_mode_ ; // mode | |||
| uint8_t device_clock_offset_[2]; | |||
| uint32_t device_class_; // class of device. | |||
| uint16_t device_connection_handle_; // handle to connection | |||
| uint8_t remote_ver_; | |||
| uint16_t remote_man_; | |||
| uint8_t remote_subv_; | |||
| uint8_t connection_complete_ = false; // | |||
| typedef struct { | |||
| uint16_t idVendor; | |||
| uint16_t idProduct; | |||
| } product_vendor_mapping_t; | |||
| static product_vendor_mapping_t pid_vid_mapping[]; | |||
| }; | |||
| #endif | |||
+ 1519
- 0
bluetooth.cpp
Різницю між файлами не показано, бо вона завелика
Переглянути файл
+ 134
- 0
digitizer.cpp
Переглянути файл
| @@ -0,0 +1,134 @@ | |||
| /* USB EHCI Host for Teensy 3.6 | |||
| * Copyright 2017 Paul Stoffregen (paul@pjrc.com) | |||
| * | |||
| * Permission is hereby granted, free of charge, to any person obtaining a | |||
| * copy of this software and associated documentation files (the | |||
| * "Software"), to deal in the Software without restriction, including | |||
| * without limitation the rights to use, copy, modify, merge, publish, | |||
| * distribute, sublicense, and/or sell copies of the Software, and to | |||
| * permit persons to whom the Software is furnished to do so, subject to | |||
| * the following conditions: | |||
| * | |||
| * The above copyright notice and this permission notice shall be included | |||
| * in all copies or substantial portions of the Software. | |||
| * | |||
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS | |||
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | |||
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. | |||
| * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY | |||
| * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, | |||
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE | |||
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |||
| */ | |||
| #include <Arduino.h> | |||
| #include "USBHost_t36.h" // Read this header first for key info | |||
| void DigitizerController::init() | |||
| { | |||
| USBHIDParser::driver_ready_for_hid_collection(this); | |||
| } | |||
| hidclaim_t DigitizerController::claim_collection(USBHIDParser *driver, Device_t *dev, uint32_t topusage) | |||
| { | |||
| // only claim Desktop/Mouse | |||
| if (topusage != 0xff0d0001) return CLAIM_NO; | |||
| // only claim from one physical device | |||
| if (mydevice != NULL && dev != mydevice) return CLAIM_NO; | |||
| mydevice = dev; | |||
| collections_claimed++; | |||
| return CLAIM_REPORT; | |||
| } | |||
| void DigitizerController::disconnect_collection(Device_t *dev) | |||
| { | |||
| if (--collections_claimed == 0) { | |||
| mydevice = NULL; | |||
| } | |||
| } | |||
| void DigitizerController::hid_input_begin(uint32_t topusage, uint32_t type, int lgmin, int lgmax) | |||
| { | |||
| // TODO: check if absolute coordinates | |||
| hid_input_begin_ = true; | |||
| } | |||
| void DigitizerController::hid_input_data(uint32_t usage, int32_t value) | |||
| { | |||
| USBHDBGSerial.printf("Digitizer: usage=%X, value=%d\n", usage, value); | |||
| uint32_t usage_page = usage >> 16; | |||
| usage &= 0xFFFF; | |||
| USBHDBGSerial.printf("Digitizer: &usage=%X, usage_page=%x\n", usage, usage_page); | |||
| // This is Mikes version... | |||
| if (usage_page == 0xff00 && usage >= 100 && usage <= 0x108) { | |||
| switch (usage) { | |||
| case 0x102: | |||
| mouseX = value; | |||
| break; | |||
| case 0x103: | |||
| mouseY = value; | |||
| break; | |||
| case 0x32: // Apple uses this for horizontal scroll | |||
| wheelH = value; | |||
| break; | |||
| case 0x38: | |||
| wheel = value; | |||
| break; | |||
| } | |||
| digiAxes[usage & 0xf] = value; | |||
| } | |||
| if (usage_page == 0xff0D) { | |||
| if (usage >= 0 && usage < 0x138) { //at least to start | |||
| switch (usage) { | |||
| case 0x130: | |||
| mouseX = value; | |||
| break; | |||
| case 0x131: | |||
| mouseY = value; | |||
| break; | |||
| case 0x132: // Apple uses this for horizontal scroll | |||
| wheelH = value; | |||
| break; | |||
| case 0x138: | |||
| wheel = value; | |||
| break; | |||
| case 0x30: digiAxes[0] = value; break; | |||
| case 0x32: digiAxes[1] = value; break; | |||
| case 0x36: digiAxes[2] = value; break; | |||
| case 0x42: digiAxes[3] = value; break; | |||
| case 0x44: digiAxes[4] = value; break; | |||
| case 0x5A: digiAxes[5] = value; break; | |||
| case 0x5B: digiAxes[6] = value; break; | |||
| case 0x5C: digiAxes[7] = value; break; | |||
| case 0x77: digiAxes[8] = value; break; | |||
| } | |||
| //digiAxes[usage & 0xf] = value; | |||
| } else if (usage >= 0x910 && usage <= 0x91f) { | |||
| if (value == 0) { | |||
| buttons &= ~(1 << (usage - 0x910)); | |||
| } else { | |||
| buttons |= (1 << (usage - 0x910)); | |||
| } | |||
| } | |||
| } | |||
| } | |||
| void DigitizerController::hid_input_end() | |||
| { | |||
| if (hid_input_begin_) { | |||
| digitizerEvent = true; | |||
| hid_input_begin_ = false; | |||
| } | |||
| } | |||
| void DigitizerController::digitizerDataClear() { | |||
| digitizerEvent = false; | |||
| buttons = 0; | |||
| mouseX = 0; | |||
| mouseY = 0; | |||
| wheel = 0; | |||
| wheelH = 0; | |||
| } | |||
+ 4
- 4
ehci.cpp
Переглянути файл
| @@ -468,8 +468,8 @@ void USBDriverTimer::start(uint32_t microseconds) | |||
| return; | |||
| } | |||
| uint32_t remain = USBHS_GPTIMER1CTL & 0xFFFFFF; | |||
| //Serial.print("remain = "); | |||
| //Serial.println(remain); | |||
| //USBHDBGSerial.print("remain = "); | |||
| //USBHDBGSerial.println(remain); | |||
| if (microseconds < remain) { | |||
| // this timer event is before any on the schedule | |||
| __disable_irq(); | |||
| @@ -755,8 +755,8 @@ bool USBHost::queue_Data_Transfer(Pipe_t *pipe, void *buffer, uint32_t len, USBD | |||
| if (transfer == data) break; | |||
| transfer = next; | |||
| } | |||
| return false; | |||
| } | |||
| return false; | |||
| } | |||
| data->qtd.next = (uint32_t)next; | |||
| data = next; | |||
| } | |||
+ 586
- 0
examples/Bluetooth/JoystickBT/JoystickBT.ino
Переглянути файл
| @@ -0,0 +1,586 @@ | |||
| // Simple test of USB Host Mouse/Keyboard | |||
| // | |||
| // This example is in the public domain | |||
| #include "USBHost_t36.h" | |||
| //#include "debug_tt.h" | |||
| USBHost myusb; | |||
| USBHub hub1(myusb); | |||
| USBHub hub2(myusb); | |||
| USBHIDParser hid1(myusb); | |||
| USBHIDParser hid2(myusb); | |||
| USBHIDParser hid3(myusb); | |||
| USBHIDParser hid4(myusb); | |||
| USBHIDParser hid5(myusb); | |||
| JoystickController joystick1(myusb); | |||
| //BluetoothController bluet(myusb, true, "0000"); // Version does pairing to device | |||
| BluetoothController bluet(myusb); // version assumes it already was paired | |||
| int user_axis[64]; | |||
| uint32_t buttons_prev = 0; | |||
| uint32_t buttons; | |||
| RawHIDController rawhid1(myusb); | |||
| RawHIDController rawhid2(myusb, 0xffc90004); | |||
| USBDriver *drivers[] = {&hub1, &hub2, &joystick1, &bluet, &hid1, &hid2, &hid3, &hid4, &hid5}; | |||
| #define CNT_DEVICES (sizeof(drivers)/sizeof(drivers[0])) | |||
| const char * driver_names[CNT_DEVICES] = {"Hub1", "Hub2", "JOY1D", "Bluet", "HID1" , "HID2", "HID3", "HID4", "HID5"}; | |||
| bool driver_active[CNT_DEVICES] = {false, false, false, false}; | |||
| // Lets also look at HID Input devices | |||
| USBHIDInput *hiddrivers[] = {&joystick1, &rawhid1, &rawhid2}; | |||
| #define CNT_HIDDEVICES (sizeof(hiddrivers)/sizeof(hiddrivers[0])) | |||
| const char * hid_driver_names[CNT_DEVICES] = {"Joystick1", "RawHid1", "RawHid2"}; | |||
| bool hid_driver_active[CNT_DEVICES] = {false, false, false}; | |||
| BTHIDInput *bthiddrivers[] = {&joystick1}; | |||
| #define CNT_BTHIDDEVICES (sizeof(bthiddrivers)/sizeof(bthiddrivers[0])) | |||
| const char * bthid_driver_names[CNT_HIDDEVICES] = {"joystick"}; | |||
| bool bthid_driver_active[CNT_HIDDEVICES] = {false}; | |||
| bool show_changed_only = false; | |||
| bool show_raw_data = false; | |||
| bool show_changed_data = false; | |||
| uint8_t joystick_left_trigger_value = 0; | |||
| uint8_t joystick_right_trigger_value = 0; | |||
| uint64_t joystick_full_notify_mask = (uint64_t) - 1; | |||
| int psAxis[64]; | |||
| bool first_joystick_message = true; | |||
| uint8_t last_bdaddr[6] = {0, 0, 0, 0, 0, 0}; | |||
| // ps3 motion on USB does not do much, but see if we can pair it and maybe change | |||
| // color of bulb... | |||
| uint32_t PS3_MOTION_timer = 0; | |||
| uint8_t PS3_MOTION_tried_to_pair_state = 0; | |||
| #define PS3_MOTION_PERIOD 2500 // not sure yet what would be good period for this.. | |||
| //============================================================================= | |||
| // Setup | |||
| //============================================================================= | |||
| void setup() | |||
| { | |||
| Serial1.begin(2000000); | |||
| while (!Serial) ; // wait for Arduino Serial Monitor | |||
| Serial.println("\n\nUSB Host Testing"); | |||
| Serial.println(sizeof(USBHub), DEC); | |||
| myusb.begin(); | |||
| delay(2000); | |||
| rawhid1.attachReceive(OnReceiveHidData); | |||
| rawhid2.attachReceive(OnReceiveHidData); | |||
| } | |||
| //============================================================================= | |||
| // Loop | |||
| //============================================================================= | |||
| void loop() | |||
| { | |||
| myusb.Task(); | |||
| if (Serial.available()) { | |||
| int ch = Serial.read(); // get the first char. | |||
| while (Serial.read() != -1) ; | |||
| if ((ch == 'b') || (ch == 'B')) { | |||
| Serial.println("Only notify on Basic Axis changes"); | |||
| joystick1.axisChangeNotifyMask(0x3ff); | |||
| } else if ((ch == 'f') || (ch == 'F')) { | |||
| Serial.println("Only notify on Full Axis changes"); | |||
| joystick1.axisChangeNotifyMask(joystick_full_notify_mask); | |||
| } else { | |||
| if (show_changed_only) { | |||
| show_changed_only = false; | |||
| Serial.println("\n*** Show All fields mode ***"); | |||
| } else { | |||
| show_changed_only = true; | |||
| Serial.println("\n*** Show only changed fields mode ***"); | |||
| } | |||
| } | |||
| } | |||
| // check to see if the device list has changed: | |||
| UpdateActiveDeviceInfo(); | |||
| processPS3MotionTimer(); | |||
| if (joystick1.available()) { | |||
| if (first_joystick_message) { | |||
| Serial.printf("*** First Joystick message %x:%x ***\n", | |||
| joystick1.idVendor(), joystick1.idProduct()); | |||
| first_joystick_message = false; | |||
| const uint8_t *psz = joystick1.manufacturer(); | |||
| if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz); | |||
| psz = joystick1.product(); | |||
| if (psz && *psz) Serial.printf(" product: %s\n", psz); | |||
| psz = joystick1.serialNumber(); | |||
| if (psz && *psz) Serial.printf(" Serial: %s\n", psz); | |||
| // lets try to reduce number of fields that update | |||
| joystick1.axisChangeNotifyMask(0xFFFFFl); | |||
| } | |||
| for (uint8_t i = 0; i < 64; i++) { | |||
| psAxis[i] = joystick1.getAxis(i); | |||
| } | |||
| switch (joystick1.joystickType()) { | |||
| case JoystickController::UNKNOWN: | |||
| case JoystickController::PS4: | |||
| displayPS4Data(); | |||
| break; | |||
| case JoystickController::PS3: | |||
| displayPS3Data(); | |||
| break; | |||
| case JoystickController::PS3_MOTION: | |||
| displayPS3MotionData(); | |||
| break; | |||
| case JoystickController::XBOXONE: | |||
| case JoystickController::XBOX360: | |||
| displayXBoxData(); | |||
| break; | |||
| default: | |||
| displayRawData(); | |||
| break; | |||
| } | |||
| //for (uint8_t i = 0; i < 24; i++) { | |||
| // Serial.printf(" %d:%d", i, psAxis[i]); | |||
| //} | |||
| //Serial.println(); | |||
| delay(100); | |||
| joystick1.joystickDataClear(); | |||
| } | |||
| // See if we have some RAW data | |||
| if (rawhid1) { | |||
| int ch; | |||
| uint8_t buffer[64]; | |||
| uint8_t count_chars = 0; | |||
| memset(buffer, 0, sizeof(buffer)); | |||
| if (Serial.available()) { | |||
| while (((ch = Serial.read()) != -1) && (count_chars < sizeof(buffer))) { | |||
| buffer[count_chars++] = ch; | |||
| } | |||
| rawhid1.sendPacket(buffer); | |||
| } | |||
| } | |||
| } | |||
| //============================================================================= | |||
| // UpdateActiveDeviceInfo | |||
| //============================================================================= | |||
| void UpdateActiveDeviceInfo() { | |||
| for (uint8_t i = 0; i < CNT_DEVICES; i++) { | |||
| if (*drivers[i] != driver_active[i]) { | |||
| if (driver_active[i]) { | |||
| Serial.printf("*** Device %s - disconnected ***\n", driver_names[i]); | |||
| driver_active[i] = false; | |||
| } else { | |||
| Serial.printf("*** Device %s %x:%x - connected ***\n", driver_names[i], drivers[i]->idVendor(), drivers[i]->idProduct()); | |||
| driver_active[i] = true; | |||
| const uint8_t *psz = drivers[i]->manufacturer(); | |||
| if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz); | |||
| psz = drivers[i]->product(); | |||
| if (psz && *psz) Serial.printf(" product: %s\n", psz); | |||
| psz = drivers[i]->serialNumber(); | |||
| if (psz && *psz) Serial.printf(" Serial: %s\n", psz); | |||
| if (drivers[i] == &bluet) { | |||
| const uint8_t *bdaddr = bluet.myBDAddr(); | |||
| // remember it... | |||
| Serial.printf(" BDADDR: %x:%x:%x:%x:%x:%x\n", bdaddr[0], bdaddr[1], bdaddr[2], bdaddr[3], bdaddr[4], bdaddr[5]); | |||
| for (uint8_t i = 0; i < 6; i++) last_bdaddr[i] = bdaddr[i]; | |||
| } | |||
| } | |||
| } | |||
| } | |||
| for (uint8_t i = 0; i < CNT_HIDDEVICES; i++) { | |||
| if (*hiddrivers[i] != hid_driver_active[i]) { | |||
| if (hid_driver_active[i]) { | |||
| Serial.printf("*** HID Device %s - disconnected ***\n", hid_driver_names[i]); | |||
| hid_driver_active[i] = false; | |||
| } else { | |||
| Serial.printf("*** HID Device %s %x:%x - connected ***\n", hid_driver_names[i], hiddrivers[i]->idVendor(), hiddrivers[i]->idProduct()); | |||
| hid_driver_active[i] = true; | |||
| const uint8_t *psz = hiddrivers[i]->manufacturer(); | |||
| if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz); | |||
| psz = hiddrivers[i]->product(); | |||
| if (psz && *psz) Serial.printf(" product: %s\n", psz); | |||
| psz = hiddrivers[i]->serialNumber(); | |||
| if (psz && *psz) Serial.printf(" Serial: %s\n", psz); | |||
| // See if this is our joystick object... | |||
| if (hiddrivers[i] == &joystick1) { | |||
| Serial.printf(" Joystick type: %d\n", joystick1.joystickType()); | |||
| if (joystick1.joystickType() == JoystickController::PS3_MOTION) { | |||
| Serial.println(" PS3 Motion detected"); | |||
| PS3_MOTION_timer = millis(); // set time for last event | |||
| PS3_MOTION_tried_to_pair_state = 0; | |||
| } | |||
| } | |||
| } | |||
| } | |||
| } | |||
| // Then Bluetooth devices | |||
| for (uint8_t i = 0; i < CNT_BTHIDDEVICES; i++) { | |||
| if (*bthiddrivers[i] != bthid_driver_active[i]) { | |||
| if (bthid_driver_active[i]) { | |||
| Serial.printf("*** BTHID Device %s - disconnected ***\n", hid_driver_names[i]); | |||
| bthid_driver_active[i] = false; | |||
| } else { | |||
| Serial.printf("*** BTHID Device %s %x:%x - connected ***\n", hid_driver_names[i], hiddrivers[i]->idVendor(), hiddrivers[i]->idProduct()); | |||
| bthid_driver_active[i] = true; | |||
| const uint8_t *psz = bthiddrivers[i]->manufacturer(); | |||
| if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz); | |||
| psz = bthiddrivers[i]->product(); | |||
| if (psz && *psz) Serial.printf(" product: %s\n", psz); | |||
| psz = bthiddrivers[i]->serialNumber(); | |||
| if (psz && *psz) Serial.printf(" Serial: %s\n", psz); | |||
| } | |||
| } | |||
| } | |||
| } | |||
| //============================================================================= | |||
| // displayPS4Data | |||
| //============================================================================= | |||
| void displayPS4Data() | |||
| { | |||
| buttons = joystick1.getButtons(); | |||
| Serial.printf("LX: %d, LY: %d, RX: %d, RY: %d \r\n", psAxis[0], psAxis[1], psAxis[2], psAxis[5]); | |||
| Serial.printf("L-Trig: %d, R-Trig: %d\r\n", psAxis[3], psAxis[4]); | |||
| Serial.printf("Buttons: %x\r\n", buttons); | |||
| Serial.printf("Battery Status: %d\n", ((psAxis[30] & ((1 << 4) - 1))*10)); | |||
| printAngles(); | |||
| Serial.println(); | |||
| uint8_t ltv; | |||
| uint8_t rtv; | |||
| ltv = psAxis[3]; | |||
| rtv = psAxis[4]; | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| Serial.printf("Rumbling: %d, %d\r\n", ltv, rtv); | |||
| joystick1.setRumble(ltv, rtv); | |||
| } | |||
| if (buttons != buttons_prev) { | |||
| uint8_t lr = 0; | |||
| uint8_t lg = 0; | |||
| uint8_t lb = 0; | |||
| if(buttons == 0x10008){//Srq | |||
| lr = 0xff; | |||
| } | |||
| if(buttons == 0x40008){//Circ | |||
| lg = 0xff; | |||
| } | |||
| if(buttons == 0x80008){//Tri | |||
| lb = 0xff; | |||
| } | |||
| Serial.print(buttons,HEX); Serial.print(", "); | |||
| Serial.print(lr); Serial.print(", "); | |||
| Serial.print(lg); Serial.print(", "); | |||
| Serial.println(lb); | |||
| joystick1.setLEDs(lr, lg, lb); | |||
| buttons_prev = buttons; | |||
| } | |||
| } | |||
| //============================================================================= | |||
| // displayPS3Data | |||
| //============================================================================= | |||
| void displayPS3Data() | |||
| { | |||
| buttons = joystick1.getButtons(); | |||
| //buttons = psAxis[2] | ((uint16_t)psAxis[3] << 8); | |||
| // Use L3 (Left joystick button) to toggle Show Raw or not... | |||
| if ((buttons & 0x02) && !(buttons_prev & 0x02)) show_raw_data = !show_raw_data; | |||
| if ((buttons & 0x04) && !(buttons_prev & 0x04)) show_changed_data = !show_changed_data; | |||
| // See about maybe pair... | |||
| if ((buttons & 0x10000) && !(buttons_prev & 0x10000) && (buttons & 0x0C01)) { | |||
| // PS button just pressed and select button pressed act like PS4 share like... | |||
| // Note: you can use either R1 or L1 with the PS button, to work with Sony Move Navigation... | |||
| Serial.print("\nPS3 Pairing Request"); | |||
| if (!last_bdaddr[0] && !last_bdaddr[1] && !last_bdaddr[2] && !last_bdaddr[3] && !last_bdaddr[4] && !last_bdaddr[5]) { | |||
| Serial.println(" - failed - no Bluetooth adapter has been plugged in"); | |||
| } else if (!hiddrivers[0]) { // Kludge see if we are connected as HID? | |||
| Serial.println(" - failed - PS3 device not plugged into USB"); | |||
| } else { | |||
| Serial.printf(" - Attempt pair to: %x:%x:%x:%x:%x:%x\n", last_bdaddr[0], last_bdaddr[1], last_bdaddr[2], last_bdaddr[3], last_bdaddr[4], last_bdaddr[5]); | |||
| if (! joystick1.PS3Pair(last_bdaddr)) { | |||
| Serial.println(" Pairing call Failed"); | |||
| } else { | |||
| Serial.println(" Pairing complete (I hope), make sure Bluetooth adapter is plugged in and try PS3 without USB"); | |||
| } | |||
| } | |||
| } | |||
| if (show_raw_data) { | |||
| displayRawData(); | |||
| } else { | |||
| Serial.printf("LX: %d, LY: %d, RX: %d, RY: %d \r\n", psAxis[0], psAxis[1], psAxis[2], psAxis[5]); | |||
| Serial.printf("L-Trig: %d, R-Trig: %d\r\n", psAxis[3], psAxis[4]); | |||
| Serial.printf("Buttons: %x\r\n", buttons); | |||
| } | |||
| uint8_t ltv; | |||
| uint8_t rtv; | |||
| ltv = psAxis[3]; | |||
| rtv = psAxis[4]; | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| Serial.printf("Rumbling: %d, %d\r\n", ltv, rtv); | |||
| joystick1.setRumble(ltv, rtv); | |||
| } | |||
| if (buttons != buttons_prev) { | |||
| uint8_t leds = 0; | |||
| if (buttons & 0x8000) leds = 1; //Srq | |||
| if (buttons & 0x2000) leds = 2; //Cir | |||
| if (buttons & 0x1000) leds = 3; //Tri | |||
| //Cross = 2 | |||
| joystick1.setLEDs(leds); | |||
| buttons_prev = buttons; | |||
| } | |||
| } | |||
| //============================================================================= | |||
| // displayPS3MotionData | |||
| //============================================================================= | |||
| void displayPS3MotionData() | |||
| { | |||
| buttons = joystick1.getButtons(); | |||
| // Hard to know what is best here. for now just copy raw data over... | |||
| // will do this for now... Format of thought to be data. | |||
| // data[1-3] Buttons (mentioned 4 as well but appears to be counter | |||
| // axis[0-1] data[5] Trigger, Previous trigger value | |||
| // 2-5 Unknown probably place holders for Axis like data for other PS3 | |||
| // 6 - Time stamp | |||
| // 7 - Battery | |||
| // 8-19 - Accel: XL, XH, YL, YH, ZL, ZH, XL2, XH2, YL2, YH2, ZL2, ZH2 | |||
| // 20-31 - Gyro: Xl,Xh,Yl,Yh,Zl,Zh,Xl2,Xh2,Yl2,Yh2,Zl2,Zh2 | |||
| // 32 - Temp High | |||
| // 33 - Temp Low (4 bits) Maybe Magneto x High on other?? | |||
| // Use Select button to choose raw or not | |||
| if ((buttons & 0x01) && !(buttons_prev & 0x01)) show_raw_data = !show_raw_data; | |||
| if ((buttons & 0x04) && !(buttons_prev & 0x04)) show_changed_data = !show_changed_data; | |||
| if (show_raw_data) { | |||
| displayRawData(); | |||
| } else { | |||
| uint64_t changed_mask = joystick1.axisChangedMask(); | |||
| Serial.printf("Changed: %08x Buttons: %x: Trig: %d\r\n", (uint32_t)changed_mask, buttons, psAxis[0]); | |||
| Serial.printf("Battery Status: %d\n", psAxis[7]); | |||
| printPS3MotionAngles(); | |||
| Serial.println(); | |||
| } | |||
| uint8_t ltv = psAxis[0]; | |||
| if ((ltv != joystick_left_trigger_value) ) { | |||
| joystick_left_trigger_value = ltv; | |||
| Serial.printf("Rumbling: %d\r\n", ltv); | |||
| joystick1.setRumble(ltv, 0); | |||
| } | |||
| if (buttons != buttons_prev) { | |||
| uint8_t ledsR = (buttons & 0x8000)? 0xff : 0; //Srq | |||
| uint8_t ledsG = (buttons & 0x2000)? 0xff : 0; //Cir | |||
| uint8_t ledsB = (buttons & 0x1000)? 0xff : 0; //Tri | |||
| Serial.printf("Set Leds %x %x %x\r\n", ledsR, ledsG, ledsB ); | |||
| joystick1.setLEDs(ledsR, ledsG, ledsB); | |||
| buttons_prev = buttons; | |||
| } | |||
| } | |||
| //============================================================================= | |||
| // displayXBoxData | |||
| //============================================================================= | |||
| void displayXBoxData() | |||
| { | |||
| buttons = joystick1.getButtons(); | |||
| // Use L3 (Left joystick button) to toggle Show Raw or not... | |||
| if ((buttons & 0x4000) && !(buttons_prev & 0x4000)) show_raw_data = !show_raw_data; | |||
| if ((buttons & 0x8000) && !(buttons_prev & 0x8000)) show_changed_data = !show_changed_data; | |||
| if (show_raw_data) { | |||
| displayRawData(); | |||
| } else { | |||
| Serial.printf("LX: %d, LY: %d, RX: %d, RY: %d \r\n", psAxis[0], psAxis[1], psAxis[2], psAxis[5]); | |||
| Serial.printf("L-Trig: %d, R-Trig: %d\r\n", psAxis[3], psAxis[4]); | |||
| Serial.printf("Buttons: %x\r\n", buttons); | |||
| } | |||
| uint8_t ltv; | |||
| uint8_t rtv; | |||
| ltv = psAxis[3]; | |||
| rtv = psAxis[4]; | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| Serial.printf("Rumbling: %d, %d\r\n", ltv, rtv); | |||
| joystick1.setRumble(ltv, rtv); | |||
| } | |||
| if (buttons != buttons_prev) { | |||
| uint8_t leds = 0; | |||
| if (buttons & 0x8000) leds = 1; //Srq | |||
| if (buttons & 0x2000) leds = 2; //Cir | |||
| if (buttons & 0x1000) leds = 3; //Tri | |||
| //Cross = 2 | |||
| joystick1.setLEDs(leds); | |||
| buttons_prev = buttons; | |||
| } | |||
| } | |||
| //============================================================================= | |||
| // displayRawData | |||
| //============================================================================= | |||
| void displayRawData() { | |||
| uint64_t axis_mask = joystick1.axisMask(); | |||
| uint64_t changed_mask = joystick1.axisChangedMask(); | |||
| buttons = joystick1.getButtons(); | |||
| if (!changed_mask && (buttons == buttons_prev)) return; | |||
| if (show_changed_data) { | |||
| if (!changed_mask) return; | |||
| changed_mask &= 0xfffffffffL; // try reducing which ones show... | |||
| Serial.printf("%0x - ", joystick1.getButtons()); | |||
| for (uint16_t index = 0; changed_mask; index++) { | |||
| if (changed_mask & 1) { | |||
| Serial.printf("%d:%02x ", index, psAxis[index]); | |||
| } | |||
| changed_mask >>= 1; | |||
| } | |||
| } else { | |||
| axis_mask &= 0xffffff; | |||
| Serial.printf("%06x%06x: %06x - ", (uint32_t)(changed_mask >> 32), (uint32_t)(changed_mask & 0xffffffff), joystick1.getButtons()); | |||
| for (uint16_t index = 0; axis_mask; index++) { | |||
| Serial.printf("%02x ", psAxis[index]); | |||
| axis_mask >>= 1; | |||
| } | |||
| } | |||
| Serial.println(); | |||
| buttons_prev = buttons; | |||
| } | |||
| //============================================================================= | |||
| // OnReceiveHidData | |||
| //============================================================================= | |||
| bool OnReceiveHidData(uint32_t usage, const uint8_t *data, uint32_t len) { | |||
| // Called for maybe both HIDS for rawhid basic test. One is for the Teensy | |||
| // to output to Serial. while still having Raw Hid... | |||
| if (usage == 0xffc90004) { | |||
| // Lets trim off trailing null characters. | |||
| while ((len > 0) && (data[len - 1] == 0)) { | |||
| len--; | |||
| } | |||
| if (len) { | |||
| Serial.print("RawHid Serial: "); | |||
| Serial.write(data, len); | |||
| } | |||
| } else { | |||
| Serial.print("RawHID data: "); | |||
| Serial.println(usage, HEX); | |||
| while (len) { | |||
| uint8_t cb = (len > 16) ? 16 : len; | |||
| const uint8_t *p = data; | |||
| uint8_t i; | |||
| for (i = 0; i < cb; i++) { | |||
| Serial.printf("%02x ", *p++); | |||
| } | |||
| Serial.print(": "); | |||
| for (i = 0; i < cb; i++) { | |||
| Serial.write(((*data >= ' ') && (*data <= '~')) ? *data : '.'); | |||
| data++; | |||
| } | |||
| len -= cb; | |||
| Serial.println(); | |||
| } | |||
| } | |||
| return true; | |||
| } | |||
| //============================================================================= | |||
| // processPS3MotionTimer | |||
| //============================================================================= | |||
| static const uint32_t PS3_MOTION_colors[] = {0, 0xff, 0xff00, 0xff0000, 0xffff, 0xff00ff, 0xffff00, 0xffffff}; | |||
| uint8_t PS3_MOTION_colors_index = 0; | |||
| void processPS3MotionTimer() { | |||
| // See if we have a PS3_MOTION connected and we have run for a certain amount of time | |||
| if (PS3_MOTION_timer && ((millis()-PS3_MOTION_timer) >= PS3_MOTION_PERIOD)) { | |||
| Serial.println("PS3 Motion Timer"); Serial.flush(); | |||
| if (joystick1) { | |||
| PS3_MOTION_timer = millis(); // joystick not there any more... | |||
| // We will first try to set feedback color for the PS3, maybe alternate colors | |||
| if (++PS3_MOTION_colors_index >= sizeof(PS3_MOTION_colors)/sizeof(PS3_MOTION_colors[0])) PS3_MOTION_colors_index = 0; | |||
| joystick1.setLEDs(PS3_MOTION_colors[PS3_MOTION_colors_index]); | |||
| // Next see if we can try to pair. | |||
| if (PS3_MOTION_tried_to_pair_state == 0) { | |||
| Serial.println("PS3_MOTION Connected"); | |||
| if (!last_bdaddr[0] && !last_bdaddr[1] && !last_bdaddr[2] && !last_bdaddr[3] && !last_bdaddr[4] && !last_bdaddr[5]) { | |||
| Serial.println(" - No Bluetooth adapter has been plugged in - so will not try to pair"); | |||
| PS3_MOTION_tried_to_pair_state = 1; | |||
| } | |||
| } | |||
| if ((PS3_MOTION_tried_to_pair_state < 2) && | |||
| (last_bdaddr[0] || last_bdaddr[1] || last_bdaddr[2] || last_bdaddr[3] || last_bdaddr[4] || last_bdaddr[5])) { | |||
| Serial.println(" - Bluetooth device detected, will try to pair"); | |||
| // Lets try to pair | |||
| if (! joystick1.PS3Pair(last_bdaddr)) { | |||
| Serial.println(" - Pairing call Failed"); | |||
| } else { | |||
| Serial.println(" - Pairing complete (I hope), make sure Bluetooth adapter is plugged in and try PS3 without USB"); | |||
| } | |||
| PS3_MOTION_tried_to_pair_state = 2; // don't try again... | |||
| } | |||
| } else { | |||
| Serial.println("PS3 Motion Joystick no longer detected"); | |||
| PS3_MOTION_timer = 0; // joystick not there any more... | |||
| } | |||
| } | |||
| } | |||
+ 1
- 0
examples/Bluetooth/JoystickBT/defs.h
Переглянути файл
| @@ -0,0 +1 @@ | |||
+ 146
- 0
examples/Bluetooth/JoystickBT/helperPS.ino
Переглянути файл
| @@ -0,0 +1,146 @@ | |||
| float pitch, roll; | |||
| float gx, gy, gz; | |||
| int16_t mx, my, mz; | |||
| uint16_t xc, yc; | |||
| uint8_t isTouch; | |||
| float ax, ay, az; | |||
| int16_t xc_old, yc_old; | |||
| /* Decode 12-bit signed value (assuming two's complement) */ | |||
| #define TWELVE_BIT_SIGNED(x) (((x) & 0x800)?(-(((~(x)) & 0xFFF) + 1)):(x)) | |||
| #define Model_ZCM1 1 | |||
| //#define Model_ZCM2 0 | |||
| void printAngles(){ | |||
| //test function calls | |||
| float gx, gy, gz; | |||
| getAccel(ax, ay, az); | |||
| Serial.printf("Accel-g's: %f, %f, %f\n", ax, ay, az); | |||
| getGyro(gx, gy, gz); | |||
| Serial.printf("Gyro-deg/sec: %f, %f, %f\n", gx, gy, gz); | |||
| getAngles(pitch, roll); | |||
| Serial.printf("Pitch/Roll: %f, %f\n", pitch, roll); | |||
| getCoords(xc, yc, isTouch); | |||
| } | |||
| void getCoords(uint16_t &xc, uint16_t &yc, uint8_t &isTouch){ | |||
| //uint8_t finger = 0; //only getting finger 1 | |||
| // Trackpad touch 1: id, active, x, y | |||
| xc = ((psAxis[37] & 0x0f) << 8) | psAxis[36]; | |||
| yc = psAxis[38] << 4 | ((psAxis[37] & 0xf0) >> 4), | |||
| isTouch = psAxis[35] >> 7; | |||
| if(xc != xc_old || yc != yc_old){ | |||
| Serial.printf("Touch: %d, %d, %d, %d\n", psAxis[33], isTouch, xc, yc); | |||
| xc_old = xc; | |||
| yc_old = yc; | |||
| } | |||
| } | |||
| void getAccel( float &ax, float &ay, float &az){ | |||
| int accelx = (int16_t)(psAxis[20]<<8) | psAxis[19]; | |||
| int accelz = (int16_t)(psAxis[22]<<8) | psAxis[21]; | |||
| int accely = (int16_t)(psAxis[24]<<8) | psAxis[23]; | |||
| ax = (float) accelx/8192; | |||
| ay = (float) accely/8192; | |||
| az = (float) accelz/8192; | |||
| } | |||
| void getAngles(float &p, float &r){ | |||
| getAccel( ax, ay, az); | |||
| p = (atan2f(ay, az) + PI) * RAD_TO_DEG; | |||
| r = (atan2f(ax, az) + PI) * RAD_TO_DEG; | |||
| } | |||
| void getGyro(float &gx, float &gy, float &gz){ | |||
| int gyroy = (int16_t)(psAxis[14]<<8) | psAxis[13]; | |||
| int gyroz = (int16_t)(psAxis[16]<<8) | psAxis[15]; | |||
| int gyrox = (int16_t)(psAxis[18]<<8) | psAxis[17]; | |||
| gx = (float) gyrox * RAD_TO_DEG/1024; | |||
| gy = (float) gyroy * RAD_TO_DEG/1024; | |||
| gz = (float) gyroz * RAD_TO_DEG/1024; | |||
| } | |||
| void printPS3MotionAngles(){ | |||
| //test function calls | |||
| float gx, gy, gz; | |||
| getPS3MotionAccel(ax, ay, az); | |||
| Serial.printf("Accel-g's: %f, %f, %f\n", ax, ay, az); | |||
| getPS3MotionGyro(gx, gy, gz); | |||
| Serial.printf("Gyro-deg/sec: %f, %f, %f\n", gx, gy, gz); | |||
| getPS3MotionMag(mx, my, mz); | |||
| Serial.printf("Mag: %d, %d, %d\n", mx, my, mz); | |||
| getPS3MotionAngles(pitch, roll); | |||
| Serial.printf("Pitch/Roll: %f, %f\n", pitch, roll); | |||
| } | |||
| void getPS3MotionAccel( float &ax, float &ay, float &az){ | |||
| int accelx = (psAxis[15]<<8 | psAxis[14]); | |||
| int accely = (psAxis[17]<<8 | psAxis[16]); | |||
| int accelz = (psAxis[19]<<8 | psAxis[18]); | |||
| #if defined(Model_ZCM1) | |||
| accelx = accelx-0x8000; | |||
| accely = accely-0x8000; | |||
| accelz = accelz-0x8000; | |||
| #elif defined(Model_ZCM2) | |||
| accelx = (accelx & 0x8000) ? (-(~accelx & 0xFFFF) + 1) : accelx; | |||
| accely = (accely & 0x8000) ? (-(~accely & 0xFFFF) + 1) : accely; | |||
| accelz = (accelz & 0x8000) ? (-(~accelz & 0xFFFF) + 1) : accelz; | |||
| #endif | |||
| ax = (float) accelx/4096; | |||
| ay = (float) accely/4096; | |||
| az = (float) accelz/4096; | |||
| } | |||
| void getPS3MotionAngles(float &p, float &r){ | |||
| getAccel( ax, ay, az); | |||
| p = (atan2f(ay, az) + PI) * RAD_TO_DEG; | |||
| r = (atan2f(ax, az) + PI) * RAD_TO_DEG; | |||
| } | |||
| void getPS3MotionGyro(float &gx, float &gy, float &gz){ | |||
| int gyrox = (psAxis[21]<<8 | psAxis[20]); | |||
| int gyroy = (psAxis[23]<<8 | psAxis[22]); | |||
| int gyroz = (psAxis[25]<<8 | psAxis[24]); | |||
| #if defined(Model_ZCM1) | |||
| gyrox = gyrox-0x8000; | |||
| gyroy = gyroy-0x8000; | |||
| gyroz = gyroz-0x8000; | |||
| #elif defined(Model_ZCM2) | |||
| gyrox = (gyrox & 0x8000) ? (-(~gyrox & 0xFFFF) + 1) : gyrox; | |||
| gyroy = (gyroy & 0x8000) ? (-(~gyroy & 0xFFFF) + 1) : gyroy; | |||
| gyroz = (gyroz & 0x8000) ? (-(~gyroz & 0xFFFF) + 1) : gyroz; | |||
| #endif | |||
| gx = (float) gyrox * RAD_TO_DEG/1024; | |||
| gy = (float) gyroy * RAD_TO_DEG/1024; | |||
| gz = (float) gyroz * RAD_TO_DEG/1024; | |||
| } | |||
| void getPS3MotionMag(int16_t &mx, int16_t &my, int16_t &mz){ | |||
| #if defined(Model_ZCM1) | |||
| mx = TWELVE_BIT_SIGNED(((psAxis[33] & 0x0F) << 8) | | |||
| psAxis[34]); | |||
| my = TWELVE_BIT_SIGNED((psAxis[35] << 4) | | |||
| (psAxis[36] & 0xF0) >> 4); | |||
| mz = TWELVE_BIT_SIGNED(((psAxis[36] & 0x0F) << 8) | | |||
| psAxis[37]); | |||
| #elif defined(Model_ZCM2) | |||
| // NOTE: This model does not have magnetometers | |||
| Serial.println("Not avail for ZCM2!"); | |||
| #endif | |||
| } | |||
+ 568
- 0
examples/Bluetooth/KeyboardBT/KeyboardBT.ino
Переглянути файл
| @@ -0,0 +1,568 @@ | |||
| // Simple test of USB Host Mouse/Keyboard | |||
| // | |||
| // This example is in the public domain | |||
| #include "USBHost_t36.h" | |||
| USBHost myusb; | |||
| USBHub hub1(myusb); | |||
| USBHub hub2(myusb); | |||
| KeyboardController keyboard1(myusb); | |||
| //KeyboardController keyboard2(myusb); | |||
| USBHIDParser hid1(myusb); | |||
| USBHIDParser hid2(myusb); | |||
| USBHIDParser hid3(myusb); | |||
| USBHIDParser hid4(myusb); | |||
| USBHIDParser hid5(myusb); | |||
| //MouseController mouse1(myusb); | |||
| //JoystickController joystick1(myusb); | |||
| BluetoothController bluet(myusb, true, "0000"); // Version does pairing to device | |||
| //BluetoothController bluet(myusb); // version assumes it already was paired | |||
| int user_axis[64]; | |||
| uint32_t buttons_prev = 0; | |||
| RawHIDController rawhid1(myusb); | |||
| RawHIDController rawhid2(myusb, 0xffc90004); | |||
| //USBDriver *drivers[] = {&hub1, &hub2,&keyboard1, &keyboard2, &joystick1, &bluet, &hid1, &hid2, &hid3, &hid4, &hid5}; | |||
| USBDriver *drivers[] = {&hub1, &hub2, &keyboard1, &bluet, &hid1, &hid2, &hid3, &hid4, &hid5}; | |||
| #define CNT_DEVICES (sizeof(drivers)/sizeof(drivers[0])) | |||
| //const char * driver_names[CNT_DEVICES] = {"Hub1","Hub2", "KB1", "KB2", "JOY1D", "Bluet", "HID1" , "HID2", "HID3", "HID4", "HID5"}; | |||
| const char * driver_names[CNT_DEVICES] = {"Hub1","Hub2", "KB1", "Bluet", "HID1" , "HID2", "HID3", "HID4", "HID5"}; | |||
| bool driver_active[CNT_DEVICES] = {false, false, false, false}; | |||
| // Lets also look at HID Input devices | |||
| //USBHIDInput *hiddrivers[] = {&mouse1, &joystick1, &rawhid1, &rawhid2}; | |||
| USBHIDInput *hiddrivers[] = {&rawhid1, &rawhid2}; | |||
| #define CNT_HIDDEVICES (sizeof(hiddrivers)/sizeof(hiddrivers[0])) | |||
| //const char * hid_driver_names[CNT_DEVICES] = {"Mouse1","Joystick1", "RawHid1", "RawHid2"}; | |||
| const char * hid_driver_names[CNT_DEVICES] = {"RawHid1", "RawHid2"}; | |||
| bool hid_driver_active[CNT_DEVICES] = {false, false, false}; | |||
| bool show_changed_only = false; | |||
| uint8_t joystick_left_trigger_value = 0; | |||
| uint8_t joystick_right_trigger_value = 0; | |||
| uint64_t joystick_full_notify_mask = (uint64_t)-1; | |||
| void setup() | |||
| { | |||
| while (!Serial) ; // wait for Arduino Serial Monitor | |||
| Serial.println("\n\nUSB Host Testing"); | |||
| Serial.println(sizeof(USBHub), DEC); | |||
| myusb.begin(); | |||
| keyboard1.attachPress(OnPress); | |||
| //keyboard2.attachPress(OnPress); | |||
| keyboard1.attachExtrasPress(OnHIDExtrasPress); | |||
| keyboard1.attachExtrasRelease(OnHIDExtrasRelease); | |||
| //keyboard2.attachExtrasPress(OnHIDExtrasPress); | |||
| //keyboard2.attachExtrasRelease(OnHIDExtrasRelease); | |||
| rawhid1.attachReceive(OnReceiveHidData); | |||
| rawhid2.attachReceive(OnReceiveHidData); | |||
| } | |||
| void loop() | |||
| { | |||
| myusb.Task(); | |||
| /* | |||
| if (Serial.available()) { | |||
| int ch = Serial.read(); // get the first char. | |||
| while (Serial.read() != -1) ; | |||
| if ((ch == 'b') || (ch == 'B')) { | |||
| Serial.println("Only notify on Basic Axis changes"); | |||
| joystick1.axisChangeNotifyMask(0x3ff); | |||
| } else if ((ch == 'f') || (ch == 'F')) { | |||
| Serial.println("Only notify on Full Axis changes"); | |||
| joystick1.axisChangeNotifyMask(joystick_full_notify_mask); | |||
| } else { | |||
| if (show_changed_only) { | |||
| show_changed_only = false; | |||
| Serial.println("\n*** Show All fields mode ***"); | |||
| } else { | |||
| show_changed_only = true; | |||
| Serial.println("\n*** Show only changed fields mode ***"); | |||
| } | |||
| } | |||
| } | |||
| */ | |||
| for (uint8_t i = 0; i < CNT_DEVICES; i++) { | |||
| if (*drivers[i] != driver_active[i]) { | |||
| if (driver_active[i]) { | |||
| Serial.printf("*** Device %s - disconnected ***\n", driver_names[i]); | |||
| driver_active[i] = false; | |||
| } else { | |||
| Serial.printf("*** Device %s %x:%x - connected ***\n", driver_names[i], drivers[i]->idVendor(), drivers[i]->idProduct()); | |||
| driver_active[i] = true; | |||
| const uint8_t *psz = drivers[i]->manufacturer(); | |||
| if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz); | |||
| psz = drivers[i]->product(); | |||
| if (psz && *psz) Serial.printf(" product: %s\n", psz); | |||
| psz = drivers[i]->serialNumber(); | |||
| if (psz && *psz) Serial.printf(" Serial: %s\n", psz); | |||
| } | |||
| } | |||
| } | |||
| for (uint8_t i = 0; i < CNT_HIDDEVICES; i++) { | |||
| if (*hiddrivers[i] != hid_driver_active[i]) { | |||
| if (hid_driver_active[i]) { | |||
| Serial.printf("*** HID Device %s - disconnected ***\n", hid_driver_names[i]); | |||
| hid_driver_active[i] = false; | |||
| } else { | |||
| Serial.printf("*** HID Device %s %x:%x - connected ***\n", hid_driver_names[i], hiddrivers[i]->idVendor(), hiddrivers[i]->idProduct()); | |||
| hid_driver_active[i] = true; | |||
| const uint8_t *psz = hiddrivers[i]->manufacturer(); | |||
| if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz); | |||
| psz = hiddrivers[i]->product(); | |||
| if (psz && *psz) Serial.printf(" product: %s\n", psz); | |||
| psz = hiddrivers[i]->serialNumber(); | |||
| if (psz && *psz) Serial.printf(" Serial: %s\n", psz); | |||
| } | |||
| } | |||
| } | |||
| /* | |||
| if(mouse1.available()) { | |||
| Serial.print("Mouse: buttons = "); | |||
| Serial.print(mouse1.getButtons()); | |||
| Serial.print(", mouseX = "); | |||
| Serial.print(mouse1.getMouseX()); | |||
| Serial.print(", mouseY = "); | |||
| Serial.print(mouse1.getMouseY()); | |||
| Serial.print(", wheel = "); | |||
| Serial.print(mouse1.getWheel()); | |||
| Serial.print(", wheelH = "); | |||
| Serial.print(mouse1.getWheelH()); | |||
| Serial.println(); | |||
| mouse1.mouseDataClear(); | |||
| } | |||
| if (joystick1.available()) { | |||
| uint64_t axis_mask = joystick1.axisMask(); | |||
| uint64_t axis_changed_mask = joystick1.axisChangedMask(); | |||
| Serial.print("Joystick: buttons = "); | |||
| uint32_t buttons = joystick1.getButtons(); | |||
| Serial.print(buttons, HEX); | |||
| //Serial.printf(" AMasks: %x %x:%x", axis_mask, (uint32_t)(user_axis_mask >> 32), (uint32_t)(user_axis_mask & 0xffffffff)); | |||
| //Serial.printf(" M: %lx %lx", axis_mask, joystick1.axisChangedMask()); | |||
| if (show_changed_only) { | |||
| for (uint8_t i = 0; axis_changed_mask != 0; i++, axis_changed_mask >>= 1) { | |||
| if (axis_changed_mask & 1) { | |||
| Serial.printf(" %d:%d", i, joystick1.getAxis(i)); | |||
| } | |||
| } | |||
| } else { | |||
| for (uint8_t i = 0; axis_mask != 0; i++, axis_mask >>= 1) { | |||
| if (axis_mask & 1) { | |||
| Serial.printf(" %d:%d", i, joystick1.getAxis(i)); | |||
| } | |||
| } | |||
| } | |||
| uint8_t ltv; | |||
| uint8_t rtv; | |||
| switch (joystick1.joystickType) { | |||
| default: | |||
| break; | |||
| case JoystickController::PS4: | |||
| ltv = joystick1.getAxis(3); | |||
| rtv = joystick1.getAxis(4); | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| joystick1.setRumble(ltv, rtv); | |||
| } | |||
| break; | |||
| case JoystickController::PS3: | |||
| ltv = joystick1.getAxis(18); | |||
| rtv = joystick1.getAxis(19); | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| joystick1.setRumble(ltv, rtv, 50); | |||
| } | |||
| break; | |||
| case JoystickController::XBOXONE: | |||
| case JoystickController::XBOX360: | |||
| ltv = joystick1.getAxis(4); | |||
| rtv = joystick1.getAxis(5); | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| joystick1.setRumble(ltv, rtv); | |||
| Serial.printf(" Set Rumble %d %d", ltv, rtv); | |||
| } | |||
| break; | |||
| } | |||
| if (buttons != buttons_prev) { | |||
| if (joystick1.joystickType == JoystickController::PS3) { | |||
| joystick1.setLEDs((buttons>>12) & 0xf); // try to get to TRI/CIR/X/SQuare | |||
| } else { | |||
| uint8_t lr = (buttons & 1)? 0xff : 0; | |||
| uint8_t lg = (buttons & 2)? 0xff : 0; | |||
| uint8_t lb = (buttons & 4)? 0xff : 0; | |||
| joystick1.setLEDs(lr, lg, lb); | |||
| } | |||
| buttons_prev = buttons; | |||
| } | |||
| Serial.println(); | |||
| joystick1.joystickDataClear(); | |||
| } | |||
| */ | |||
| // See if we have some RAW data | |||
| if (rawhid1) { | |||
| int ch; | |||
| uint8_t buffer[64]; | |||
| uint8_t count_chars = 0; | |||
| memset(buffer, 0, sizeof(buffer)); | |||
| if (Serial.available()) { | |||
| while (((ch = Serial.read()) != -1) && (count_chars < sizeof(buffer))) { | |||
| buffer[count_chars++] = ch; | |||
| } | |||
| rawhid1.sendPacket(buffer); | |||
| } | |||
| } | |||
| } | |||
| void OnPress(int key) | |||
| { | |||
| Serial.print("key '"); | |||
| switch (key) { | |||
| case KEYD_UP : Serial.print("UP"); break; | |||
| case KEYD_DOWN : Serial.print("DN"); break; | |||
| case KEYD_LEFT : Serial.print("LEFT"); break; | |||
| case KEYD_RIGHT : Serial.print("RIGHT"); break; | |||
| case KEYD_INSERT : Serial.print("Ins"); break; | |||
| case KEYD_DELETE : Serial.print("Del"); break; | |||
| case KEYD_PAGE_UP : Serial.print("PUP"); break; | |||
| case KEYD_PAGE_DOWN: Serial.print("PDN"); break; | |||
| case KEYD_HOME : Serial.print("HOME"); break; | |||
| case KEYD_END : Serial.print("END"); break; | |||
| case KEYD_F1 : Serial.print("F1"); break; | |||
| case KEYD_F2 : Serial.print("F2"); break; | |||
| case KEYD_F3 : Serial.print("F3"); break; | |||
| case KEYD_F4 : Serial.print("F4"); break; | |||
| case KEYD_F5 : Serial.print("F5"); break; | |||
| case KEYD_F6 : Serial.print("F6"); break; | |||
| case KEYD_F7 : Serial.print("F7"); break; | |||
| case KEYD_F8 : Serial.print("F8"); break; | |||
| case KEYD_F9 : Serial.print("F9"); break; | |||
| case KEYD_F10 : Serial.print("F10"); break; | |||
| case KEYD_F11 : Serial.print("F11"); break; | |||
| case KEYD_F12 : Serial.print("F12"); break; | |||
| default: Serial.print((char)key); break; | |||
| } | |||
| Serial.print("' "); | |||
| Serial.print(key); | |||
| Serial.print(" MOD: "); | |||
| if (keyboard1) { | |||
| Serial.print(keyboard1.getModifiers(), HEX); | |||
| Serial.print(" OEM: "); | |||
| Serial.print(keyboard1.getOemKey(), HEX); | |||
| Serial.print(" LEDS: "); | |||
| Serial.println(keyboard1.LEDS(), HEX); | |||
| //} else { | |||
| //Serial.print(keyboard2.getModifiers(), HEX); | |||
| //Serial.print(" OEM: "); | |||
| //Serial.print(keyboard2.getOemKey(), HEX); | |||
| //Serial.print(" LEDS: "); | |||
| //Serial.println(keyboard2.LEDS(), HEX); | |||
| } | |||
| //Serial.print("key "); | |||
| //Serial.print((char)keyboard1.getKey()); | |||
| //Serial.print(" "); | |||
| //Serial.print((char)keyboard2.getKey()); | |||
| //Serial.println(); | |||
| } | |||
| void OnHIDExtrasPress(uint32_t top, uint16_t key) | |||
| { | |||
| Serial.print("HID ("); | |||
| Serial.print(top, HEX); | |||
| Serial.print(") key press:"); | |||
| Serial.print(key, HEX); | |||
| if (top == 0xc0000) { | |||
| switch (key) { | |||
| case 0x20 : Serial.print(" - +10"); break; | |||
| case 0x21 : Serial.print(" - +100"); break; | |||
| case 0x22 : Serial.print(" - AM/PM"); break; | |||
| case 0x30 : Serial.print(" - Power"); break; | |||
| case 0x31 : Serial.print(" - Reset"); break; | |||
| case 0x32 : Serial.print(" - Sleep"); break; | |||
| case 0x33 : Serial.print(" - Sleep After"); break; | |||
| case 0x34 : Serial.print(" - Sleep Mode"); break; | |||
| case 0x35 : Serial.print(" - Illumination"); break; | |||
| case 0x36 : Serial.print(" - Function Buttons"); break; | |||
| case 0x40 : Serial.print(" - Menu"); break; | |||
| case 0x41 : Serial.print(" - Menu Pick"); break; | |||
| case 0x42 : Serial.print(" - Menu Up"); break; | |||
| case 0x43 : Serial.print(" - Menu Down"); break; | |||
| case 0x44 : Serial.print(" - Menu Left"); break; | |||
| case 0x45 : Serial.print(" - Menu Right"); break; | |||
| case 0x46 : Serial.print(" - Menu Escape"); break; | |||
| case 0x47 : Serial.print(" - Menu Value Increase"); break; | |||
| case 0x48 : Serial.print(" - Menu Value Decrease"); break; | |||
| case 0x60 : Serial.print(" - Data On Screen"); break; | |||
| case 0x61 : Serial.print(" - Closed Caption"); break; | |||
| case 0x62 : Serial.print(" - Closed Caption Select"); break; | |||
| case 0x63 : Serial.print(" - VCR/TV"); break; | |||
| case 0x64 : Serial.print(" - Broadcast Mode"); break; | |||
| case 0x65 : Serial.print(" - Snapshot"); break; | |||
| case 0x66 : Serial.print(" - Still"); break; | |||
| case 0x80 : Serial.print(" - Selection"); break; | |||
| case 0x81 : Serial.print(" - Assign Selection"); break; | |||
| case 0x82 : Serial.print(" - Mode Step"); break; | |||
| case 0x83 : Serial.print(" - Recall Last"); break; | |||
| case 0x84 : Serial.print(" - Enter Channel"); break; | |||
| case 0x85 : Serial.print(" - Order Movie"); break; | |||
| case 0x86 : Serial.print(" - Channel"); break; | |||
| case 0x87 : Serial.print(" - Media Selection"); break; | |||
| case 0x88 : Serial.print(" - Media Select Computer"); break; | |||
| case 0x89 : Serial.print(" - Media Select TV"); break; | |||
| case 0x8A : Serial.print(" - Media Select WWW"); break; | |||
| case 0x8B : Serial.print(" - Media Select DVD"); break; | |||
| case 0x8C : Serial.print(" - Media Select Telephone"); break; | |||
| case 0x8D : Serial.print(" - Media Select Program Guide"); break; | |||
| case 0x8E : Serial.print(" - Media Select Video Phone"); break; | |||
| case 0x8F : Serial.print(" - Media Select Games"); break; | |||
| case 0x90 : Serial.print(" - Media Select Messages"); break; | |||
| case 0x91 : Serial.print(" - Media Select CD"); break; | |||
| case 0x92 : Serial.print(" - Media Select VCR"); break; | |||
| case 0x93 : Serial.print(" - Media Select Tuner"); break; | |||
| case 0x94 : Serial.print(" - Quit"); break; | |||
| case 0x95 : Serial.print(" - Help"); break; | |||
| case 0x96 : Serial.print(" - Media Select Tape"); break; | |||
| case 0x97 : Serial.print(" - Media Select Cable"); break; | |||
| case 0x98 : Serial.print(" - Media Select Satellite"); break; | |||
| case 0x99 : Serial.print(" - Media Select Security"); break; | |||
| case 0x9A : Serial.print(" - Media Select Home"); break; | |||
| case 0x9B : Serial.print(" - Media Select Call"); break; | |||
| case 0x9C : Serial.print(" - Channel Increment"); break; | |||
| case 0x9D : Serial.print(" - Channel Decrement"); break; | |||
| case 0x9E : Serial.print(" - Media Select SAP"); break; | |||
| case 0xA0 : Serial.print(" - VCR Plus"); break; | |||
| case 0xA1 : Serial.print(" - Once"); break; | |||
| case 0xA2 : Serial.print(" - Daily"); break; | |||
| case 0xA3 : Serial.print(" - Weekly"); break; | |||
| case 0xA4 : Serial.print(" - Monthly"); break; | |||
| case 0xB0 : Serial.print(" - Play"); break; | |||
| case 0xB1 : Serial.print(" - Pause"); break; | |||
| case 0xB2 : Serial.print(" - Record"); break; | |||
| case 0xB3 : Serial.print(" - Fast Forward"); break; | |||
| case 0xB4 : Serial.print(" - Rewind"); break; | |||
| case 0xB5 : Serial.print(" - Scan Next Track"); break; | |||
| case 0xB6 : Serial.print(" - Scan Previous Track"); break; | |||
| case 0xB7 : Serial.print(" - Stop"); break; | |||
| case 0xB8 : Serial.print(" - Eject"); break; | |||
| case 0xB9 : Serial.print(" - Random Play"); break; | |||
| case 0xBA : Serial.print(" - Select DisC"); break; | |||
| case 0xBB : Serial.print(" - Enter Disc"); break; | |||
| case 0xBC : Serial.print(" - Repeat"); break; | |||
| case 0xBD : Serial.print(" - Tracking"); break; | |||
| case 0xBE : Serial.print(" - Track Normal"); break; | |||
| case 0xBF : Serial.print(" - Slow Tracking"); break; | |||
| case 0xC0 : Serial.print(" - Frame Forward"); break; | |||
| case 0xC1 : Serial.print(" - Frame Back"); break; | |||
| case 0xC2 : Serial.print(" - Mark"); break; | |||
| case 0xC3 : Serial.print(" - Clear Mark"); break; | |||
| case 0xC4 : Serial.print(" - Repeat From Mark"); break; | |||
| case 0xC5 : Serial.print(" - Return To Mark"); break; | |||
| case 0xC6 : Serial.print(" - Search Mark Forward"); break; | |||
| case 0xC7 : Serial.print(" - Search Mark Backwards"); break; | |||
| case 0xC8 : Serial.print(" - Counter Reset"); break; | |||
| case 0xC9 : Serial.print(" - Show Counter"); break; | |||
| case 0xCA : Serial.print(" - Tracking Increment"); break; | |||
| case 0xCB : Serial.print(" - Tracking Decrement"); break; | |||
| case 0xCD : Serial.print(" - Pause/Continue"); break; | |||
| case 0xE0 : Serial.print(" - Volume"); break; | |||
| case 0xE1 : Serial.print(" - Balance"); break; | |||
| case 0xE2 : Serial.print(" - Mute"); break; | |||
| case 0xE3 : Serial.print(" - Bass"); break; | |||
| case 0xE4 : Serial.print(" - Treble"); break; | |||
| case 0xE5 : Serial.print(" - Bass Boost"); break; | |||
| case 0xE6 : Serial.print(" - Surround Mode"); break; | |||
| case 0xE7 : Serial.print(" - Loudness"); break; | |||
| case 0xE8 : Serial.print(" - MPX"); break; | |||
| case 0xE9 : Serial.print(" - Volume Up"); break; | |||
| case 0xEA : Serial.print(" - Volume Down"); break; | |||
| case 0xF0 : Serial.print(" - Speed Select"); break; | |||
| case 0xF1 : Serial.print(" - Playback Speed"); break; | |||
| case 0xF2 : Serial.print(" - Standard Play"); break; | |||
| case 0xF3 : Serial.print(" - Long Play"); break; | |||
| case 0xF4 : Serial.print(" - Extended Play"); break; | |||
| case 0xF5 : Serial.print(" - Slow"); break; | |||
| case 0x100: Serial.print(" - Fan Enable"); break; | |||
| case 0x101: Serial.print(" - Fan Speed"); break; | |||
| case 0x102: Serial.print(" - Light"); break; | |||
| case 0x103: Serial.print(" - Light Illumination Level"); break; | |||
| case 0x104: Serial.print(" - Climate Control Enable"); break; | |||
| case 0x105: Serial.print(" - Room Temperature"); break; | |||
| case 0x106: Serial.print(" - Security Enable"); break; | |||
| case 0x107: Serial.print(" - Fire Alarm"); break; | |||
| case 0x108: Serial.print(" - Police Alarm"); break; | |||
| case 0x150: Serial.print(" - Balance Right"); break; | |||
| case 0x151: Serial.print(" - Balance Left"); break; | |||
| case 0x152: Serial.print(" - Bass Increment"); break; | |||
| case 0x153: Serial.print(" - Bass Decrement"); break; | |||
| case 0x154: Serial.print(" - Treble Increment"); break; | |||
| case 0x155: Serial.print(" - Treble Decrement"); break; | |||
| case 0x160: Serial.print(" - Speaker System"); break; | |||
| case 0x161: Serial.print(" - Channel Left"); break; | |||
| case 0x162: Serial.print(" - Channel Right"); break; | |||
| case 0x163: Serial.print(" - Channel Center"); break; | |||
| case 0x164: Serial.print(" - Channel Front"); break; | |||
| case 0x165: Serial.print(" - Channel Center Front"); break; | |||
| case 0x166: Serial.print(" - Channel Side"); break; | |||
| case 0x167: Serial.print(" - Channel Surround"); break; | |||
| case 0x168: Serial.print(" - Channel Low Frequency Enhancement"); break; | |||
| case 0x169: Serial.print(" - Channel Top"); break; | |||
| case 0x16A: Serial.print(" - Channel Unknown"); break; | |||
| case 0x170: Serial.print(" - Sub-channel"); break; | |||
| case 0x171: Serial.print(" - Sub-channel Increment"); break; | |||
| case 0x172: Serial.print(" - Sub-channel Decrement"); break; | |||
| case 0x173: Serial.print(" - Alternate Audio Increment"); break; | |||
| case 0x174: Serial.print(" - Alternate Audio Decrement"); break; | |||
| case 0x180: Serial.print(" - Application Launch Buttons"); break; | |||
| case 0x181: Serial.print(" - AL Launch Button Configuration Tool"); break; | |||
| case 0x182: Serial.print(" - AL Programmable Button Configuration"); break; | |||
| case 0x183: Serial.print(" - AL Consumer Control Configuration"); break; | |||
| case 0x184: Serial.print(" - AL Word Processor"); break; | |||
| case 0x185: Serial.print(" - AL Text Editor"); break; | |||
| case 0x186: Serial.print(" - AL Spreadsheet"); break; | |||
| case 0x187: Serial.print(" - AL Graphics Editor"); break; | |||
| case 0x188: Serial.print(" - AL Presentation App"); break; | |||
| case 0x189: Serial.print(" - AL Database App"); break; | |||
| case 0x18A: Serial.print(" - AL Email Reader"); break; | |||
| case 0x18B: Serial.print(" - AL Newsreader"); break; | |||
| case 0x18C: Serial.print(" - AL Voicemail"); break; | |||
| case 0x18D: Serial.print(" - AL Contacts/Address Book"); break; | |||
| case 0x18E: Serial.print(" - AL Calendar/Schedule"); break; | |||
| case 0x18F: Serial.print(" - AL Task/Project Manager"); break; | |||
| case 0x190: Serial.print(" - AL Log/Journal/Timecard"); break; | |||
| case 0x191: Serial.print(" - AL Checkbook/Finance"); break; | |||
| case 0x192: Serial.print(" - AL Calculator"); break; | |||
| case 0x193: Serial.print(" - AL A/V Capture/Playback"); break; | |||
| case 0x194: Serial.print(" - AL Local Machine Browser"); break; | |||
| case 0x195: Serial.print(" - AL LAN/WAN Browser"); break; | |||
| case 0x196: Serial.print(" - AL Internet Browser"); break; | |||
| case 0x197: Serial.print(" - AL Remote Networking/ISP Connect"); break; | |||
| case 0x198: Serial.print(" - AL Network Conference"); break; | |||
| case 0x199: Serial.print(" - AL Network Chat"); break; | |||
| case 0x19A: Serial.print(" - AL Telephony/Dialer"); break; | |||
| case 0x19B: Serial.print(" - AL Logon"); break; | |||
| case 0x19C: Serial.print(" - AL Logoff"); break; | |||
| case 0x19D: Serial.print(" - AL Logon/Logoff"); break; | |||
| case 0x19E: Serial.print(" - AL Terminal Lock/Screensaver"); break; | |||
| case 0x19F: Serial.print(" - AL Control Panel"); break; | |||
| case 0x1A0: Serial.print(" - AL Command Line Processor/Run"); break; | |||
| case 0x1A1: Serial.print(" - AL Process/Task Manager"); break; | |||
| case 0x1A2: Serial.print(" - AL Select Tast/Application"); break; | |||
| case 0x1A3: Serial.print(" - AL Next Task/Application"); break; | |||
| case 0x1A4: Serial.print(" - AL Previous Task/Application"); break; | |||
| case 0x1A5: Serial.print(" - AL Preemptive Halt Task/Application"); break; | |||
| case 0x200: Serial.print(" - Generic GUI Application Controls"); break; | |||
| case 0x201: Serial.print(" - AC New"); break; | |||
| case 0x202: Serial.print(" - AC Open"); break; | |||
| case 0x203: Serial.print(" - AC Close"); break; | |||
| case 0x204: Serial.print(" - AC Exit"); break; | |||
| case 0x205: Serial.print(" - AC Maximize"); break; | |||
| case 0x206: Serial.print(" - AC Minimize"); break; | |||
| case 0x207: Serial.print(" - AC Save"); break; | |||
| case 0x208: Serial.print(" - AC Print"); break; | |||
| case 0x209: Serial.print(" - AC Properties"); break; | |||
| case 0x21A: Serial.print(" - AC Undo"); break; | |||
| case 0x21B: Serial.print(" - AC Copy"); break; | |||
| case 0x21C: Serial.print(" - AC Cut"); break; | |||
| case 0x21D: Serial.print(" - AC Paste"); break; | |||
| case 0x21E: Serial.print(" - AC Select All"); break; | |||
| case 0x21F: Serial.print(" - AC Find"); break; | |||
| case 0x220: Serial.print(" - AC Find and Replace"); break; | |||
| case 0x221: Serial.print(" - AC Search"); break; | |||
| case 0x222: Serial.print(" - AC Go To"); break; | |||
| case 0x223: Serial.print(" - AC Home"); break; | |||
| case 0x224: Serial.print(" - AC Back"); break; | |||
| case 0x225: Serial.print(" - AC Forward"); break; | |||
| case 0x226: Serial.print(" - AC Stop"); break; | |||
| case 0x227: Serial.print(" - AC Refresh"); break; | |||
| case 0x228: Serial.print(" - AC Previous Link"); break; | |||
| case 0x229: Serial.print(" - AC Next Link"); break; | |||
| case 0x22A: Serial.print(" - AC Bookmarks"); break; | |||
| case 0x22B: Serial.print(" - AC History"); break; | |||
| case 0x22C: Serial.print(" - AC Subscriptions"); break; | |||
| case 0x22D: Serial.print(" - AC Zoom In"); break; | |||
| case 0x22E: Serial.print(" - AC Zoom Out"); break; | |||
| case 0x22F: Serial.print(" - AC Zoom"); break; | |||
| case 0x230: Serial.print(" - AC Full Screen View"); break; | |||
| case 0x231: Serial.print(" - AC Normal View"); break; | |||
| case 0x232: Serial.print(" - AC View Toggle"); break; | |||
| case 0x233: Serial.print(" - AC Scroll Up"); break; | |||
| case 0x234: Serial.print(" - AC Scroll Down"); break; | |||
| case 0x235: Serial.print(" - AC Scroll"); break; | |||
| case 0x236: Serial.print(" - AC Pan Left"); break; | |||
| case 0x237: Serial.print(" - AC Pan Right"); break; | |||
| case 0x238: Serial.print(" - AC Pan"); break; | |||
| case 0x239: Serial.print(" - AC New Window"); break; | |||
| case 0x23A: Serial.print(" - AC Tile Horizontally"); break; | |||
| case 0x23B: Serial.print(" - AC Tile Vertically"); break; | |||
| case 0x23C: Serial.print(" - AC Format"); break; | |||
| } | |||
| } | |||
| Serial.println(); | |||
| } | |||
| void OnHIDExtrasRelease(uint32_t top, uint16_t key) | |||
| { | |||
| Serial.print("HID ("); | |||
| Serial.print(top, HEX); | |||
| Serial.print(") key release:"); | |||
| Serial.println(key, HEX); | |||
| } | |||
| bool OnReceiveHidData(uint32_t usage, const uint8_t *data, uint32_t len) { | |||
| // Called for maybe both HIDS for rawhid basic test. One is for the Teensy | |||
| // to output to Serial. while still having Raw Hid... | |||
| if (usage == 0xffc90004) { | |||
| // Lets trim off trailing null characters. | |||
| while ((len > 0) && (data[len-1] == 0)) { | |||
| len--; | |||
| } | |||
| if (len) { | |||
| Serial.print("RawHid Serial: "); | |||
| Serial.write(data, len); | |||
| } | |||
| } else { | |||
| Serial.print("RawHID data: "); | |||
| Serial.println(usage, HEX); | |||
| while (len) { | |||
| uint8_t cb = (len > 16)? 16 : len; | |||
| const uint8_t *p = data; | |||
| uint8_t i; | |||
| for (i = 0; i < cb; i++) { | |||
| Serial.printf("%02x ", *p++); | |||
| } | |||
| Serial.print(": "); | |||
| for (i = 0; i < cb; i++) { | |||
| Serial.write(((*data >= ' ')&&(*data <= '~'))? *data : '.'); | |||
| data++; | |||
| } | |||
| len -= cb; | |||
| Serial.println(); | |||
| } | |||
| } | |||
| return true; | |||
| } | |||
+ 1
- 0
examples/Bluetooth/KeyboardBT/defs.h
Переглянути файл
| @@ -0,0 +1 @@ | |||
+ 577
- 0
examples/Bluetooth/MouseBT/MouseBT.ino
Переглянути файл
| @@ -0,0 +1,577 @@ | |||
| // Simple test of USB Host Mouse/Keyboard | |||
| // | |||
| // This example is in the public domain | |||
| #include "USBHost_t36.h" | |||
| USBHost myusb; | |||
| USBHub hub1(myusb); | |||
| USBHub hub2(myusb); | |||
| KeyboardController keyboard1(myusb); | |||
| KeyboardController keyboard2(myusb); | |||
| USBHIDParser hid1(myusb); | |||
| USBHIDParser hid2(myusb); | |||
| USBHIDParser hid3(myusb); | |||
| USBHIDParser hid4(myusb); | |||
| USBHIDParser hid5(myusb); | |||
| MouseController mouse1(myusb); | |||
| JoystickController joystick1(myusb); | |||
| BluetoothController bluet(myusb, true, "0000"); // Version does pairing to device | |||
| //BluetoothController bluet(myusb); // version assumes it already was paired | |||
| int user_axis[64]; | |||
| uint32_t buttons_prev = 0; | |||
| RawHIDController rawhid1(myusb); | |||
| RawHIDController rawhid2(myusb, 0xffc90004); | |||
| USBDriver *drivers[] = {&hub1, &hub2,&keyboard1, &keyboard2, &joystick1, &bluet, &hid1, &hid2, &hid3, &hid4, &hid5}; | |||
| #define CNT_DEVICES (sizeof(drivers)/sizeof(drivers[0])) | |||
| const char * driver_names[CNT_DEVICES] = {"Hub1","Hub2", "KB1", "KB2", "JOY1D", "Bluet", "HID1" , "HID2", "HID3", "HID4", "HID5"}; | |||
| bool driver_active[CNT_DEVICES] = {false, false, false, false}; | |||
| // Lets also look at HID Input devices | |||
| USBHIDInput *hiddrivers[] = {&mouse1, &joystick1, &rawhid1, &rawhid2}; | |||
| #define CNT_HIDDEVICES (sizeof(hiddrivers)/sizeof(hiddrivers[0])) | |||
| const char * hid_driver_names[CNT_DEVICES] = {"Mouse1", "Joystick1", "RawHid1", "RawHid2"}; | |||
| bool hid_driver_active[CNT_DEVICES] = {false, false}; | |||
| bool show_changed_only = false; | |||
| uint8_t joystick_left_trigger_value = 0; | |||
| uint8_t joystick_right_trigger_value = 0; | |||
| uint64_t joystick_full_notify_mask = (uint64_t) - 1; | |||
| void setup() | |||
| { | |||
| while (!Serial) ; // wait for Arduino Serial Monitor | |||
| Serial.println("\n\nUSB Host Testing"); | |||
| Serial.println(sizeof(USBHub), DEC); | |||
| myusb.begin(); | |||
| keyboard1.attachPress(OnPress); | |||
| keyboard2.attachPress(OnPress); | |||
| keyboard1.attachExtrasPress(OnHIDExtrasPress); | |||
| keyboard1.attachExtrasRelease(OnHIDExtrasRelease); | |||
| keyboard2.attachExtrasPress(OnHIDExtrasPress); | |||
| keyboard2.attachExtrasRelease(OnHIDExtrasRelease); | |||
| // The below forceBootProtocol will force which ever | |||
| // next keyboard that attaches to this device to be in boot protocol | |||
| // Only try this if you run into keyboard with issues. If this is a combined | |||
| // device like wireless mouse and keyboard this can cause mouse problems. | |||
| //keyboard1.forceBootProtocol(); | |||
| rawhid1.attachReceive(OnReceiveHidData); | |||
| rawhid2.attachReceive(OnReceiveHidData); | |||
| } | |||
| void loop() | |||
| { | |||
| myusb.Task(); | |||
| if (Serial.available()) { | |||
| int ch = Serial.read(); // get the first char. | |||
| while (Serial.read() != -1) ; | |||
| if ((ch == 'b') || (ch == 'B')) { | |||
| Serial.println("Only notify on Basic Axis changes"); | |||
| joystick1.axisChangeNotifyMask(0x3ff); | |||
| } else if ((ch == 'f') || (ch == 'F')) { | |||
| Serial.println("Only notify on Full Axis changes"); | |||
| joystick1.axisChangeNotifyMask(joystick_full_notify_mask); | |||
| } else { | |||
| if (show_changed_only) { | |||
| show_changed_only = false; | |||
| Serial.println("\n*** Show All fields mode ***"); | |||
| } else { | |||
| show_changed_only = true; | |||
| Serial.println("\n*** Show only changed fields mode ***"); | |||
| } | |||
| } | |||
| } | |||
| for (uint8_t i = 0; i < CNT_DEVICES; i++) { | |||
| if (*drivers[i] != driver_active[i]) { | |||
| if (driver_active[i]) { | |||
| Serial.printf("*** Device %s - disconnected ***\n", driver_names[i]); | |||
| driver_active[i] = false; | |||
| } else { | |||
| Serial.printf("*** Device %s %x:%x - connected ***\n", driver_names[i], drivers[i]->idVendor(), drivers[i]->idProduct()); | |||
| driver_active[i] = true; | |||
| const uint8_t *psz = drivers[i]->manufacturer(); | |||
| if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz); | |||
| psz = drivers[i]->product(); | |||
| if (psz && *psz) Serial.printf(" product: %s\n", psz); | |||
| psz = drivers[i]->serialNumber(); | |||
| if (psz && *psz) Serial.printf(" Serial: %s\n", psz); | |||
| // Note: with some keyboards there is an issue that they don't output in boot protocol mode | |||
| // and may not work. The above code can try to force the keyboard into boot mode, but there | |||
| // are issues with doing this blindly with combo devices like wireless keyboard/mouse, which | |||
| // may cause the mouse to not work. Note: the above id is in the builtin list of | |||
| // vendor IDs that are already forced | |||
| if (drivers[i] == &keyboard1) { | |||
| if (keyboard1.idVendor() == 0x04D9) { | |||
| Serial.println("Gigabyte vendor: force boot protocol"); | |||
| // Gigabyte keyboard | |||
| keyboard1.forceBootProtocol(); | |||
| } | |||
| } | |||
| } | |||
| } | |||
| } | |||
| for (uint8_t i = 0; i < CNT_HIDDEVICES; i++) { | |||
| if (*hiddrivers[i] != hid_driver_active[i]) { | |||
| if (hid_driver_active[i]) { | |||
| Serial.printf("*** HID Device %s - disconnected ***\n", hid_driver_names[i]); | |||
| hid_driver_active[i] = false; | |||
| } else { | |||
| Serial.printf("*** HID Device %s %x:%x - connected ***\n", hid_driver_names[i], hiddrivers[i]->idVendor(), hiddrivers[i]->idProduct()); | |||
| hid_driver_active[i] = true; | |||
| const uint8_t *psz = hiddrivers[i]->manufacturer(); | |||
| if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz); | |||
| psz = hiddrivers[i]->product(); | |||
| if (psz && *psz) Serial.printf(" product: %s\n", psz); | |||
| psz = hiddrivers[i]->serialNumber(); | |||
| if (psz && *psz) Serial.printf(" Serial: %s\n", psz); | |||
| } | |||
| } | |||
| } | |||
| if (mouse1.available()) { | |||
| Serial.print("Mouse: buttons = "); | |||
| Serial.print(mouse1.getButtons()); | |||
| Serial.print(", mouseX = "); | |||
| Serial.print(mouse1.getMouseX()); | |||
| Serial.print(", mouseY = "); | |||
| Serial.print(mouse1.getMouseY()); | |||
| Serial.print(", wheel = "); | |||
| Serial.print(mouse1.getWheel()); | |||
| Serial.print(", wheelH = "); | |||
| Serial.print(mouse1.getWheelH()); | |||
| Serial.println(); | |||
| mouse1.mouseDataClear(); | |||
| } | |||
| if (joystick1.available()) { | |||
| uint64_t axis_mask = joystick1.axisMask(); | |||
| uint64_t axis_changed_mask = joystick1.axisChangedMask(); | |||
| Serial.print("Joystick: buttons = "); | |||
| uint32_t buttons = joystick1.getButtons(); | |||
| Serial.print(buttons, HEX); | |||
| //Serial.printf(" AMasks: %x %x:%x", axis_mask, (uint32_t)(user_axis_mask >> 32), (uint32_t)(user_axis_mask & 0xffffffff)); | |||
| //Serial.printf(" M: %lx %lx", axis_mask, joystick1.axisChangedMask()); | |||
| if (show_changed_only) { | |||
| for (uint8_t i = 0; axis_changed_mask != 0; i++, axis_changed_mask >>= 1) { | |||
| if (axis_changed_mask & 1) { | |||
| Serial.printf(" %d:%d", i, joystick1.getAxis(i)); | |||
| } | |||
| } | |||
| } else { | |||
| for (uint8_t i = 0; axis_mask != 0; i++, axis_mask >>= 1) { | |||
| if (axis_mask & 1) { | |||
| Serial.printf(" %d:%d", i, joystick1.getAxis(i)); | |||
| } | |||
| } | |||
| } | |||
| uint8_t ltv; | |||
| uint8_t rtv; | |||
| switch (joystick1.joystickType()) { | |||
| default: | |||
| break; | |||
| case JoystickController::PS4: | |||
| ltv = joystick1.getAxis(3); | |||
| rtv = joystick1.getAxis(4); | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| joystick1.setRumble(ltv, rtv); | |||
| } | |||
| break; | |||
| case JoystickController::PS3: | |||
| ltv = joystick1.getAxis(18); | |||
| rtv = joystick1.getAxis(19); | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| joystick1.setRumble(ltv, rtv, 50); | |||
| } | |||
| break; | |||
| case JoystickController::XBOXONE: | |||
| case JoystickController::XBOX360: | |||
| ltv = joystick1.getAxis(4); | |||
| rtv = joystick1.getAxis(5); | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| joystick1.setRumble(ltv, rtv); | |||
| Serial.printf(" Set Rumble %d %d", ltv, rtv); | |||
| } | |||
| break; | |||
| } | |||
| if (buttons != buttons_prev) { | |||
| if (joystick1.joystickType() == JoystickController::PS3) { | |||
| joystick1.setLEDs((buttons >> 12) & 0xf); // try to get to TRI/CIR/X/SQuare | |||
| } else { | |||
| uint8_t lr = (buttons & 1) ? 0xff : 0; | |||
| uint8_t lg = (buttons & 2) ? 0xff : 0; | |||
| uint8_t lb = (buttons & 4) ? 0xff : 0; | |||
| joystick1.setLEDs(lr, lg, lb); | |||
| } | |||
| buttons_prev = buttons; | |||
| } | |||
| Serial.println(); | |||
| joystick1.joystickDataClear(); | |||
| } | |||
| // See if we have some RAW data | |||
| if (rawhid1) { | |||
| int ch; | |||
| uint8_t buffer[64]; | |||
| uint8_t count_chars = 0; | |||
| memset(buffer, 0, sizeof(buffer)); | |||
| if (Serial.available()) { | |||
| while (((ch = Serial.read()) != -1) && (count_chars < sizeof(buffer))) { | |||
| buffer[count_chars++] = ch; | |||
| } | |||
| rawhid1.sendPacket(buffer); | |||
| } | |||
| } | |||
| } | |||
| void OnPress(int key) | |||
| { | |||
| Serial.print("key '"); | |||
| switch (key) { | |||
| case KEYD_UP : Serial.print("UP"); break; | |||
| case KEYD_DOWN : Serial.print("DN"); break; | |||
| case KEYD_LEFT : Serial.print("LEFT"); break; | |||
| case KEYD_RIGHT : Serial.print("RIGHT"); break; | |||
| case KEYD_INSERT : Serial.print("Ins"); break; | |||
| case KEYD_DELETE : Serial.print("Del"); break; | |||
| case KEYD_PAGE_UP : Serial.print("PUP"); break; | |||
| case KEYD_PAGE_DOWN: Serial.print("PDN"); break; | |||
| case KEYD_HOME : Serial.print("HOME"); break; | |||
| case KEYD_END : Serial.print("END"); break; | |||
| case KEYD_F1 : Serial.print("F1"); break; | |||
| case KEYD_F2 : Serial.print("F2"); break; | |||
| case KEYD_F3 : Serial.print("F3"); break; | |||
| case KEYD_F4 : Serial.print("F4"); break; | |||
| case KEYD_F5 : Serial.print("F5"); break; | |||
| case KEYD_F6 : Serial.print("F6"); break; | |||
| case KEYD_F7 : Serial.print("F7"); break; | |||
| case KEYD_F8 : Serial.print("F8"); break; | |||
| case KEYD_F9 : Serial.print("F9"); break; | |||
| case KEYD_F10 : Serial.print("F10"); break; | |||
| case KEYD_F11 : Serial.print("F11"); break; | |||
| case KEYD_F12 : Serial.print("F12"); break; | |||
| default: Serial.print((char)key); break; | |||
| } | |||
| Serial.print("' "); | |||
| Serial.print(key); | |||
| Serial.print(" MOD: "); | |||
| if (keyboard1) { | |||
| Serial.print(keyboard1.getModifiers(), HEX); | |||
| Serial.print(" OEM: "); | |||
| Serial.print(keyboard1.getOemKey(), HEX); | |||
| Serial.print(" LEDS: "); | |||
| Serial.println(keyboard1.LEDS(), HEX); | |||
| } else { | |||
| Serial.print(keyboard2.getModifiers(), HEX); | |||
| Serial.print(" OEM: "); | |||
| Serial.print(keyboard2.getOemKey(), HEX); | |||
| Serial.print(" LEDS: "); | |||
| Serial.println(keyboard2.LEDS(), HEX); | |||
| } | |||
| //Serial.print("key "); | |||
| //Serial.print((char)keyboard1.getKey()); | |||
| //Serial.print(" "); | |||
| //Serial.print((char)keyboard2.getKey()); | |||
| //Serial.println(); | |||
| } | |||
| void OnHIDExtrasPress(uint32_t top, uint16_t key) | |||
| { | |||
| Serial.print("HID ("); | |||
| Serial.print(top, HEX); | |||
| Serial.print(") key press:"); | |||
| Serial.print(key, HEX); | |||
| if (top == 0xc0000) { | |||
| switch (key) { | |||
| case 0x20 : Serial.print(" - +10"); break; | |||
| case 0x21 : Serial.print(" - +100"); break; | |||
| case 0x22 : Serial.print(" - AM/PM"); break; | |||
| case 0x30 : Serial.print(" - Power"); break; | |||
| case 0x31 : Serial.print(" - Reset"); break; | |||
| case 0x32 : Serial.print(" - Sleep"); break; | |||
| case 0x33 : Serial.print(" - Sleep After"); break; | |||
| case 0x34 : Serial.print(" - Sleep Mode"); break; | |||
| case 0x35 : Serial.print(" - Illumination"); break; | |||
| case 0x36 : Serial.print(" - Function Buttons"); break; | |||
| case 0x40 : Serial.print(" - Menu"); break; | |||
| case 0x41 : Serial.print(" - Menu Pick"); break; | |||
| case 0x42 : Serial.print(" - Menu Up"); break; | |||
| case 0x43 : Serial.print(" - Menu Down"); break; | |||
| case 0x44 : Serial.print(" - Menu Left"); break; | |||
| case 0x45 : Serial.print(" - Menu Right"); break; | |||
| case 0x46 : Serial.print(" - Menu Escape"); break; | |||
| case 0x47 : Serial.print(" - Menu Value Increase"); break; | |||
| case 0x48 : Serial.print(" - Menu Value Decrease"); break; | |||
| case 0x60 : Serial.print(" - Data On Screen"); break; | |||
| case 0x61 : Serial.print(" - Closed Caption"); break; | |||
| case 0x62 : Serial.print(" - Closed Caption Select"); break; | |||
| case 0x63 : Serial.print(" - VCR/TV"); break; | |||
| case 0x64 : Serial.print(" - Broadcast Mode"); break; | |||
| case 0x65 : Serial.print(" - Snapshot"); break; | |||
| case 0x66 : Serial.print(" - Still"); break; | |||
| case 0x80 : Serial.print(" - Selection"); break; | |||
| case 0x81 : Serial.print(" - Assign Selection"); break; | |||
| case 0x82 : Serial.print(" - Mode Step"); break; | |||
| case 0x83 : Serial.print(" - Recall Last"); break; | |||
| case 0x84 : Serial.print(" - Enter Channel"); break; | |||
| case 0x85 : Serial.print(" - Order Movie"); break; | |||
| case 0x86 : Serial.print(" - Channel"); break; | |||
| case 0x87 : Serial.print(" - Media Selection"); break; | |||
| case 0x88 : Serial.print(" - Media Select Computer"); break; | |||
| case 0x89 : Serial.print(" - Media Select TV"); break; | |||
| case 0x8A : Serial.print(" - Media Select WWW"); break; | |||
| case 0x8B : Serial.print(" - Media Select DVD"); break; | |||
| case 0x8C : Serial.print(" - Media Select Telephone"); break; | |||
| case 0x8D : Serial.print(" - Media Select Program Guide"); break; | |||
| case 0x8E : Serial.print(" - Media Select Video Phone"); break; | |||
| case 0x8F : Serial.print(" - Media Select Games"); break; | |||
| case 0x90 : Serial.print(" - Media Select Messages"); break; | |||
| case 0x91 : Serial.print(" - Media Select CD"); break; | |||
| case 0x92 : Serial.print(" - Media Select VCR"); break; | |||
| case 0x93 : Serial.print(" - Media Select Tuner"); break; | |||
| case 0x94 : Serial.print(" - Quit"); break; | |||
| case 0x95 : Serial.print(" - Help"); break; | |||
| case 0x96 : Serial.print(" - Media Select Tape"); break; | |||
| case 0x97 : Serial.print(" - Media Select Cable"); break; | |||
| case 0x98 : Serial.print(" - Media Select Satellite"); break; | |||
| case 0x99 : Serial.print(" - Media Select Security"); break; | |||
| case 0x9A : Serial.print(" - Media Select Home"); break; | |||
| case 0x9B : Serial.print(" - Media Select Call"); break; | |||
| case 0x9C : Serial.print(" - Channel Increment"); break; | |||
| case 0x9D : Serial.print(" - Channel Decrement"); break; | |||
| case 0x9E : Serial.print(" - Media Select SAP"); break; | |||
| case 0xA0 : Serial.print(" - VCR Plus"); break; | |||
| case 0xA1 : Serial.print(" - Once"); break; | |||
| case 0xA2 : Serial.print(" - Daily"); break; | |||
| case 0xA3 : Serial.print(" - Weekly"); break; | |||
| case 0xA4 : Serial.print(" - Monthly"); break; | |||
| case 0xB0 : Serial.print(" - Play"); break; | |||
| case 0xB1 : Serial.print(" - Pause"); break; | |||
| case 0xB2 : Serial.print(" - Record"); break; | |||
| case 0xB3 : Serial.print(" - Fast Forward"); break; | |||
| case 0xB4 : Serial.print(" - Rewind"); break; | |||
| case 0xB5 : Serial.print(" - Scan Next Track"); break; | |||
| case 0xB6 : Serial.print(" - Scan Previous Track"); break; | |||
| case 0xB7 : Serial.print(" - Stop"); break; | |||
| case 0xB8 : Serial.print(" - Eject"); break; | |||
| case 0xB9 : Serial.print(" - Random Play"); break; | |||
| case 0xBA : Serial.print(" - Select DisC"); break; | |||
| case 0xBB : Serial.print(" - Enter Disc"); break; | |||
| case 0xBC : Serial.print(" - Repeat"); break; | |||
| case 0xBD : Serial.print(" - Tracking"); break; | |||
| case 0xBE : Serial.print(" - Track Normal"); break; | |||
| case 0xBF : Serial.print(" - Slow Tracking"); break; | |||
| case 0xC0 : Serial.print(" - Frame Forward"); break; | |||
| case 0xC1 : Serial.print(" - Frame Back"); break; | |||
| case 0xC2 : Serial.print(" - Mark"); break; | |||
| case 0xC3 : Serial.print(" - Clear Mark"); break; | |||
| case 0xC4 : Serial.print(" - Repeat From Mark"); break; | |||
| case 0xC5 : Serial.print(" - Return To Mark"); break; | |||
| case 0xC6 : Serial.print(" - Search Mark Forward"); break; | |||
| case 0xC7 : Serial.print(" - Search Mark Backwards"); break; | |||
| case 0xC8 : Serial.print(" - Counter Reset"); break; | |||
| case 0xC9 : Serial.print(" - Show Counter"); break; | |||
| case 0xCA : Serial.print(" - Tracking Increment"); break; | |||
| case 0xCB : Serial.print(" - Tracking Decrement"); break; | |||
| case 0xCD : Serial.print(" - Pause/Continue"); break; | |||
| case 0xE0 : Serial.print(" - Volume"); break; | |||
| case 0xE1 : Serial.print(" - Balance"); break; | |||
| case 0xE2 : Serial.print(" - Mute"); break; | |||
| case 0xE3 : Serial.print(" - Bass"); break; | |||
| case 0xE4 : Serial.print(" - Treble"); break; | |||
| case 0xE5 : Serial.print(" - Bass Boost"); break; | |||
| case 0xE6 : Serial.print(" - Surround Mode"); break; | |||
| case 0xE7 : Serial.print(" - Loudness"); break; | |||
| case 0xE8 : Serial.print(" - MPX"); break; | |||
| case 0xE9 : Serial.print(" - Volume Up"); break; | |||
| case 0xEA : Serial.print(" - Volume Down"); break; | |||
| case 0xF0 : Serial.print(" - Speed Select"); break; | |||
| case 0xF1 : Serial.print(" - Playback Speed"); break; | |||
| case 0xF2 : Serial.print(" - Standard Play"); break; | |||
| case 0xF3 : Serial.print(" - Long Play"); break; | |||
| case 0xF4 : Serial.print(" - Extended Play"); break; | |||
| case 0xF5 : Serial.print(" - Slow"); break; | |||
| case 0x100: Serial.print(" - Fan Enable"); break; | |||
| case 0x101: Serial.print(" - Fan Speed"); break; | |||
| case 0x102: Serial.print(" - Light"); break; | |||
| case 0x103: Serial.print(" - Light Illumination Level"); break; | |||
| case 0x104: Serial.print(" - Climate Control Enable"); break; | |||
| case 0x105: Serial.print(" - Room Temperature"); break; | |||
| case 0x106: Serial.print(" - Security Enable"); break; | |||
| case 0x107: Serial.print(" - Fire Alarm"); break; | |||
| case 0x108: Serial.print(" - Police Alarm"); break; | |||
| case 0x150: Serial.print(" - Balance Right"); break; | |||
| case 0x151: Serial.print(" - Balance Left"); break; | |||
| case 0x152: Serial.print(" - Bass Increment"); break; | |||
| case 0x153: Serial.print(" - Bass Decrement"); break; | |||
| case 0x154: Serial.print(" - Treble Increment"); break; | |||
| case 0x155: Serial.print(" - Treble Decrement"); break; | |||
| case 0x160: Serial.print(" - Speaker System"); break; | |||
| case 0x161: Serial.print(" - Channel Left"); break; | |||
| case 0x162: Serial.print(" - Channel Right"); break; | |||
| case 0x163: Serial.print(" - Channel Center"); break; | |||
| case 0x164: Serial.print(" - Channel Front"); break; | |||
| case 0x165: Serial.print(" - Channel Center Front"); break; | |||
| case 0x166: Serial.print(" - Channel Side"); break; | |||
| case 0x167: Serial.print(" - Channel Surround"); break; | |||
| case 0x168: Serial.print(" - Channel Low Frequency Enhancement"); break; | |||
| case 0x169: Serial.print(" - Channel Top"); break; | |||
| case 0x16A: Serial.print(" - Channel Unknown"); break; | |||
| case 0x170: Serial.print(" - Sub-channel"); break; | |||
| case 0x171: Serial.print(" - Sub-channel Increment"); break; | |||
| case 0x172: Serial.print(" - Sub-channel Decrement"); break; | |||
| case 0x173: Serial.print(" - Alternate Audio Increment"); break; | |||
| case 0x174: Serial.print(" - Alternate Audio Decrement"); break; | |||
| case 0x180: Serial.print(" - Application Launch Buttons"); break; | |||
| case 0x181: Serial.print(" - AL Launch Button Configuration Tool"); break; | |||
| case 0x182: Serial.print(" - AL Programmable Button Configuration"); break; | |||
| case 0x183: Serial.print(" - AL Consumer Control Configuration"); break; | |||
| case 0x184: Serial.print(" - AL Word Processor"); break; | |||
| case 0x185: Serial.print(" - AL Text Editor"); break; | |||
| case 0x186: Serial.print(" - AL Spreadsheet"); break; | |||
| case 0x187: Serial.print(" - AL Graphics Editor"); break; | |||
| case 0x188: Serial.print(" - AL Presentation App"); break; | |||
| case 0x189: Serial.print(" - AL Database App"); break; | |||
| case 0x18A: Serial.print(" - AL Email Reader"); break; | |||
| case 0x18B: Serial.print(" - AL Newsreader"); break; | |||
| case 0x18C: Serial.print(" - AL Voicemail"); break; | |||
| case 0x18D: Serial.print(" - AL Contacts/Address Book"); break; | |||
| case 0x18E: Serial.print(" - AL Calendar/Schedule"); break; | |||
| case 0x18F: Serial.print(" - AL Task/Project Manager"); break; | |||
| case 0x190: Serial.print(" - AL Log/Journal/Timecard"); break; | |||
| case 0x191: Serial.print(" - AL Checkbook/Finance"); break; | |||
| case 0x192: Serial.print(" - AL Calculator"); break; | |||
| case 0x193: Serial.print(" - AL A/V Capture/Playback"); break; | |||
| case 0x194: Serial.print(" - AL Local Machine Browser"); break; | |||
| case 0x195: Serial.print(" - AL LAN/WAN Browser"); break; | |||
| case 0x196: Serial.print(" - AL Internet Browser"); break; | |||
| case 0x197: Serial.print(" - AL Remote Networking/ISP Connect"); break; | |||
| case 0x198: Serial.print(" - AL Network Conference"); break; | |||
| case 0x199: Serial.print(" - AL Network Chat"); break; | |||
| case 0x19A: Serial.print(" - AL Telephony/Dialer"); break; | |||
| case 0x19B: Serial.print(" - AL Logon"); break; | |||
| case 0x19C: Serial.print(" - AL Logoff"); break; | |||
| case 0x19D: Serial.print(" - AL Logon/Logoff"); break; | |||
| case 0x19E: Serial.print(" - AL Terminal Lock/Screensaver"); break; | |||
| case 0x19F: Serial.print(" - AL Control Panel"); break; | |||
| case 0x1A0: Serial.print(" - AL Command Line Processor/Run"); break; | |||
| case 0x1A1: Serial.print(" - AL Process/Task Manager"); break; | |||
| case 0x1A2: Serial.print(" - AL Select Tast/Application"); break; | |||
| case 0x1A3: Serial.print(" - AL Next Task/Application"); break; | |||
| case 0x1A4: Serial.print(" - AL Previous Task/Application"); break; | |||
| case 0x1A5: Serial.print(" - AL Preemptive Halt Task/Application"); break; | |||
| case 0x200: Serial.print(" - Generic GUI Application Controls"); break; | |||
| case 0x201: Serial.print(" - AC New"); break; | |||
| case 0x202: Serial.print(" - AC Open"); break; | |||
| case 0x203: Serial.print(" - AC Close"); break; | |||
| case 0x204: Serial.print(" - AC Exit"); break; | |||
| case 0x205: Serial.print(" - AC Maximize"); break; | |||
| case 0x206: Serial.print(" - AC Minimize"); break; | |||
| case 0x207: Serial.print(" - AC Save"); break; | |||
| case 0x208: Serial.print(" - AC Print"); break; | |||
| case 0x209: Serial.print(" - AC Properties"); break; | |||
| case 0x21A: Serial.print(" - AC Undo"); break; | |||
| case 0x21B: Serial.print(" - AC Copy"); break; | |||
| case 0x21C: Serial.print(" - AC Cut"); break; | |||
| case 0x21D: Serial.print(" - AC Paste"); break; | |||
| case 0x21E: Serial.print(" - AC Select All"); break; | |||
| case 0x21F: Serial.print(" - AC Find"); break; | |||
| case 0x220: Serial.print(" - AC Find and Replace"); break; | |||
| case 0x221: Serial.print(" - AC Search"); break; | |||
| case 0x222: Serial.print(" - AC Go To"); break; | |||
| case 0x223: Serial.print(" - AC Home"); break; | |||
| case 0x224: Serial.print(" - AC Back"); break; | |||
| case 0x225: Serial.print(" - AC Forward"); break; | |||
| case 0x226: Serial.print(" - AC Stop"); break; | |||
| case 0x227: Serial.print(" - AC Refresh"); break; | |||
| case 0x228: Serial.print(" - AC Previous Link"); break; | |||
| case 0x229: Serial.print(" - AC Next Link"); break; | |||
| case 0x22A: Serial.print(" - AC Bookmarks"); break; | |||
| case 0x22B: Serial.print(" - AC History"); break; | |||
| case 0x22C: Serial.print(" - AC Subscriptions"); break; | |||
| case 0x22D: Serial.print(" - AC Zoom In"); break; | |||
| case 0x22E: Serial.print(" - AC Zoom Out"); break; | |||
| case 0x22F: Serial.print(" - AC Zoom"); break; | |||
| case 0x230: Serial.print(" - AC Full Screen View"); break; | |||
| case 0x231: Serial.print(" - AC Normal View"); break; | |||
| case 0x232: Serial.print(" - AC View Toggle"); break; | |||
| case 0x233: Serial.print(" - AC Scroll Up"); break; | |||
| case 0x234: Serial.print(" - AC Scroll Down"); break; | |||
| case 0x235: Serial.print(" - AC Scroll"); break; | |||
| case 0x236: Serial.print(" - AC Pan Left"); break; | |||
| case 0x237: Serial.print(" - AC Pan Right"); break; | |||
| case 0x238: Serial.print(" - AC Pan"); break; | |||
| case 0x239: Serial.print(" - AC New Window"); break; | |||
| case 0x23A: Serial.print(" - AC Tile Horizontally"); break; | |||
| case 0x23B: Serial.print(" - AC Tile Vertically"); break; | |||
| case 0x23C: Serial.print(" - AC Format"); break; | |||
| } | |||
| } | |||
| Serial.println(); | |||
| } | |||
| void OnHIDExtrasRelease(uint32_t top, uint16_t key) | |||
| { | |||
| Serial.print("HID ("); | |||
| Serial.print(top, HEX); | |||
| Serial.print(") key release:"); | |||
| Serial.println(key, HEX); | |||
| } | |||
| bool OnReceiveHidData(uint32_t usage, const uint8_t *data, uint32_t len) { | |||
| // Called for maybe both HIDS for rawhid basic test. One is for the Teensy | |||
| // to output to Serial. while still having Raw Hid... | |||
| if (usage == 0xffc90004) { | |||
| // Lets trim off trailing null characters. | |||
| while ((len > 0) && (data[len - 1] == 0)) { | |||
| len--; | |||
| } | |||
| if (len) { | |||
| Serial.print("RawHid Serial: "); | |||
| Serial.write(data, len); | |||
| } | |||
| } else { | |||
| Serial.print("RawHID data: "); | |||
| Serial.println(usage, HEX); | |||
| while (len) { | |||
| uint8_t cb = (len > 16) ? 16 : len; | |||
| const uint8_t *p = data; | |||
| uint8_t i; | |||
| for (i = 0; i < cb; i++) { | |||
| Serial.printf("%02x ", *p++); | |||
| } | |||
| Serial.print(": "); | |||
| for (i = 0; i < cb; i++) { | |||
| Serial.write(((*data >= ' ') && (*data <= '~')) ? *data : '.'); | |||
| data++; | |||
| } | |||
| len -= cb; | |||
| Serial.println(); | |||
| } | |||
| } | |||
| return true; | |||
| } | |||
+ 1
- 0
examples/Bluetooth/MouseBT/defs.h
Переглянути файл
| @@ -0,0 +1 @@ | |||
+ 1776
- 0
examples/Bluetooth/Pacman-Teensy-BT/Pacman-Teensy-BT.ino
Різницю між файлами не показано, бо вона завелика
Переглянути файл
+ 997
- 0
examples/Bluetooth/Pacman-Teensy-BT/PacmanTiles.h
Різницю між файлами не показано, бо вона завелика
Переглянути файл
+ 77
- 0
examples/Bluetooth/Pacman-Teensy-BT/README.md
Переглянути файл
| @@ -0,0 +1,77 @@ | |||
| # Pacman-Arduino-Due / Modified for Teensy 3.6 and T4.x | |||
| Pacman Game for Arduino Due with tft ILI9341 and VGA output support | |||
| Pacman Game on Arduino Due with ILI9341 and VGA support (available 2 outputs at the same time), playable with keypad, 5 sample levels, VGA output is 240x320, source code avaliable on Github, Licensed under MIT License. | |||
| Original Pacman sketch modified to use a Teensy 3.6/T4 with ILI9341_t3n and USBHost_t36 libraries. Intended as demo for the incorporating BT or Serial gamepads such as the PS3 and PS4 into a user application. | |||
| Originally posted on: | |||
| Arduino Forum: | |||
| http://forum.arduino.cc/index.php?topic=375394.0 | |||
| Video: | |||
| https://www.youtube.com/watch?v=2Hdzr6m4QdU | |||
| <pre> | |||
| /******************************************************************************/ | |||
| /* */ | |||
| /* PACMAN GAME FOR TEENSY */ | |||
| /* */ | |||
| /******************************************************************************/ | |||
| /* Copyright (c) 2014 Dr. NCX (mirracle.mxx@gmail.com) */ | |||
| /* */ | |||
| /* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL */ | |||
| /* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED */ | |||
| /* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR */ | |||
| /* BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES */ | |||
| /* OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, */ | |||
| /* WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, */ | |||
| /* ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS */ | |||
| /* SOFTWARE. */ | |||
| /* */ | |||
| /* MIT license, all text above must be included in any redistribution. */ | |||
| /******************************************************************************/ | |||
| /* Original Pacman sketch modified to use a Teensy 3.6/T4 with ILI9341_t3n */ | |||
| /* and USBHost_t36 libraries. Intended as demo for the incorporating BT */ | |||
| /* or Serial gamepads such as the PS3 and PS4 into a user application. */ | |||
| /* The original version for the Arduino Due and SNES controllers can be */ | |||
| /* found at */ | |||
| /* https://forum.arduino.cc/index.php?topic=375394.0 */ | |||
| /* and */ | |||
| /* https://github.com/DrNCXCortex/Pacman-Arduino-Due */ | |||
| /* */ | |||
| /******************************************************************************/ | |||
| /* ILI9341: */ | |||
| /*----------------------------------------------------------------------------*/ | |||
| /* 8 = RST */ | |||
| /* 9 = D/C */ | |||
| /* 10 = CS */ | |||
| /* can be changed at user discretion */ | |||
| /*----------------------------------------------------------------------------*/ | |||
| /*----------------------------------------------------------------------------*/ | |||
| /* KEYPAD: */ | |||
| /*----------------------------------------------------------------------------*/ | |||
| /* PS3: button START/Pause */ | |||
| /* button SELECT */ | |||
| /* button A/Diamond */ | |||
| /* button B /Circle */ | |||
| /* button UP */ | |||
| /* button DOWN */ | |||
| /* button LEFT */ | |||
| /* button RIGHT */ | |||
| /* */ | |||
| /* PS4: button START/Pause = Share on PS4 */ | |||
| /* button SELECT = Options on PS4 */ | |||
| /* button A/Square */ | |||
| /* button B /Circle */ | |||
| /* button UP */ | |||
| /* button DOWN */ | |||
| /* button LEFT */ | |||
| /* button RIGHT */ | |||
| /* *//******************************************************************************/ | |||
| </pre> | |||
+ 2933
- 0
examples/Bluetooth/Pacman-Teensy-BT/crntsc.h
Різницю між файлами не показано, бо вона завелика
Переглянути файл
+ 2403
- 0
examples/Bluetooth/Pacman-Teensy-BT/crpal.h
Різницю між файлами не показано, бо вона завелика
Переглянути файл
+ 3082
- 0
examples/Bluetooth/Pacman-Teensy-BT/font8x8.cpp
Різницю між файлами не показано, бо вона завелика
Переглянути файл
BIN
examples/Bluetooth/Pacman-Teensy-BT/icons/apple.png
Переглянути файл
| Before | After |
|---|---|
|
|
| Width: 16 | Height: 16 | Size: 14KB |
BIN
examples/Bluetooth/Pacman-Teensy-BT/icons/bell.png
Переглянути файл
| Before | After |
|---|---|
|
|
| Width: 16 | Height: 16 | Size: 337B |
BIN
examples/Bluetooth/Pacman-Teensy-BT/icons/cherry.png
Переглянути файл
| Before | After |
|---|---|
|
|
| Width: 16 | Height: 16 | Size: 939B |
BIN
examples/Bluetooth/Pacman-Teensy-BT/icons/galaxian.png
Переглянути файл
| Before | After |
|---|---|
|
|
| Width: 16 | Height: 16 | Size: 947B |
BIN
examples/Bluetooth/Pacman-Teensy-BT/icons/grape.png
Переглянути файл
| Before | After |
|---|---|
|
|
| Width: 16 | Height: 16 | Size: 619B |
BIN
examples/Bluetooth/Pacman-Teensy-BT/icons/key.png
Переглянути файл
| Before | After |
|---|---|
|
|
| Width: 16 | Height: 16 | Size: 913B |
BIN
examples/Bluetooth/Pacman-Teensy-BT/icons/peach.png
Переглянути файл
| Before | After |
|---|---|
|
|
| Width: 16 | Height: 16 | Size: 923B |
BIN
examples/Bluetooth/Pacman-Teensy-BT/icons/strawberry.png
Переглянути файл
| Before | After |
|---|---|
|
|
| Width: 16 | Height: 16 | Size: 942B |
+ 604
- 0
examples/Digitizer/Digitizer.ino
Переглянути файл
| @@ -0,0 +1,604 @@ | |||
| // Simple test of USB Host Mouse/Keyboard | |||
| // | |||
| // This example is in the public domain | |||
| #include "USBHost_t36.h" | |||
| int mousex, mousey; | |||
| USBHost myusb; | |||
| USBHub hub1(myusb); | |||
| USBHub hub2(myusb); | |||
| KeyboardController keyboard1(myusb); | |||
| KeyboardController keyboard2(myusb); | |||
| USBHIDParser hid1(myusb); | |||
| USBHIDParser hid2(myusb); | |||
| USBHIDParser hid3(myusb); | |||
| USBHIDParser hid4(myusb); | |||
| USBHIDParser hid5(myusb); | |||
| DigitizerController digi1(myusb); | |||
| JoystickController joystick1(myusb); | |||
| //BluetoothController bluet(myusb, true, "0000"); // Version does pairing to device | |||
| BluetoothController bluet(myusb); // version assumes it already was paired | |||
| int user_axis[64]; | |||
| uint8_t digi_axis[64]; | |||
| uint32_t buttons_prev = 0; | |||
| //RawHIDController rawhid1(myusb); | |||
| RawHIDController rawhid2(myusb, 0xff000080); | |||
| USBDriver *drivers[] = {&hub1, &hub2,&keyboard1, &keyboard2, &joystick1, &bluet, &hid1, &hid2, &hid3, &hid4, &hid5}; | |||
| #define CNT_DEVICES (sizeof(drivers)/sizeof(drivers[0])) | |||
| const char * driver_names[CNT_DEVICES] = {"Hub1","Hub2", "KB1", "KB2", "JOY1D", "Bluet", "HID1" , "HID2", "HID3", "HID4", "HID5"}; | |||
| bool driver_active[CNT_DEVICES] = {false, false, false, false}; | |||
| // Lets also look at HID Input devices | |||
| USBHIDInput *hiddrivers[] = {&digi1, &joystick1, &rawhid2}; | |||
| #define CNT_HIDDEVICES (sizeof(hiddrivers)/sizeof(hiddrivers[0])) | |||
| const char * hid_driver_names[CNT_DEVICES] = {"digi1", "Joystick1", "RawHid2"}; | |||
| bool hid_driver_active[CNT_DEVICES] = {false, false}; | |||
| bool show_changed_only = false; | |||
| uint8_t joystick_left_trigger_value = 0; | |||
| uint8_t joystick_right_trigger_value = 0; | |||
| uint64_t joystick_full_notify_mask = (uint64_t) - 1; | |||
| void setup() | |||
| { | |||
| Serial1.begin(2000000); | |||
| while (!Serial) ; // wait for Arduino Serial Monitor | |||
| Serial.println("\n\nUSB Host Testing"); | |||
| Serial.println(sizeof(USBHub), DEC); | |||
| myusb.begin(); | |||
| keyboard1.attachPress(OnPress); | |||
| keyboard2.attachPress(OnPress); | |||
| keyboard1.attachExtrasPress(OnHIDExtrasPress); | |||
| keyboard1.attachExtrasRelease(OnHIDExtrasRelease); | |||
| keyboard2.attachExtrasPress(OnHIDExtrasPress); | |||
| keyboard2.attachExtrasRelease(OnHIDExtrasRelease); | |||
| // The below forceBootProtocol will force which ever | |||
| // next keyboard that attaches to this device to be in boot protocol | |||
| // Only try this if you run into keyboard with issues. If this is a combined | |||
| // device like wireless mouse and keyboard this can cause mouse problems. | |||
| //keyboard1.forceBootProtocol(); | |||
| //rawhid1.attachReceive(OnReceiveHidData); | |||
| rawhid2.attachReceive(OnReceiveHidData); | |||
| } | |||
| void loop() | |||
| { | |||
| myusb.Task(); | |||
| if (Serial.available()) { | |||
| int ch = Serial.read(); // get the first char. | |||
| while (Serial.read() != -1) ; | |||
| if ((ch == 'b') || (ch == 'B')) { | |||
| Serial.println("Only notify on Basic Axis changes"); | |||
| joystick1.axisChangeNotifyMask(0x3ff); | |||
| } else if ((ch == 'f') || (ch == 'F')) { | |||
| Serial.println("Only notify on Full Axis changes"); | |||
| joystick1.axisChangeNotifyMask(joystick_full_notify_mask); | |||
| } else { | |||
| if (show_changed_only) { | |||
| show_changed_only = false; | |||
| Serial.println("\n*** Show All fields mode ***"); | |||
| } else { | |||
| show_changed_only = true; | |||
| Serial.println("\n*** Show only changed fields mode ***"); | |||
| } | |||
| } | |||
| } | |||
| for (uint8_t i = 0; i < CNT_DEVICES; i++) { | |||
| if (*drivers[i] != driver_active[i]) { | |||
| if (driver_active[i]) { | |||
| Serial.printf("*** Device %s - disconnected ***\n", driver_names[i]); | |||
| driver_active[i] = false; | |||
| } else { | |||
| Serial.printf("*** Device %s %x:%x - connected ***\n", driver_names[i], drivers[i]->idVendor(), drivers[i]->idProduct()); | |||
| driver_active[i] = true; | |||
| const uint8_t *psz = drivers[i]->manufacturer(); | |||
| if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz); | |||
| psz = drivers[i]->product(); | |||
| if (psz && *psz) Serial.printf(" product: %s\n", psz); | |||
| psz = drivers[i]->serialNumber(); | |||
| if (psz && *psz) Serial.printf(" Serial: %s\n", psz); | |||
| // Note: with some keyboards there is an issue that they don't output in boot protocol mode | |||
| // and may not work. The above code can try to force the keyboard into boot mode, but there | |||
| // are issues with doing this blindly with combo devices like wireless keyboard/mouse, which | |||
| // may cause the mouse to not work. Note: the above id is in the builtin list of | |||
| // vendor IDs that are already forced | |||
| if (drivers[i] == &keyboard1) { | |||
| if (keyboard1.idVendor() == 0x04D9) { | |||
| Serial.println("Gigabyte vendor: force boot protocol"); | |||
| // Gigabyte keyboard | |||
| keyboard1.forceBootProtocol(); | |||
| } | |||
| } | |||
| } | |||
| } | |||
| } | |||
| for (uint8_t i = 0; i < CNT_HIDDEVICES; i++) { | |||
| if (*hiddrivers[i] != hid_driver_active[i]) { | |||
| if (hid_driver_active[i]) { | |||
| Serial.printf("*** HID Device %s - disconnected ***\n", hid_driver_names[i]); | |||
| hid_driver_active[i] = false; | |||
| } else { | |||
| Serial.printf("*** HID Device %s %x:%x - connected ***\n", hid_driver_names[i], hiddrivers[i]->idVendor(), hiddrivers[i]->idProduct()); | |||
| hid_driver_active[i] = true; | |||
| const uint8_t *psz = hiddrivers[i]->manufacturer(); | |||
| if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz); | |||
| psz = hiddrivers[i]->product(); | |||
| if (psz && *psz) Serial.printf(" product: %s\n", psz); | |||
| psz = hiddrivers[i]->serialNumber(); | |||
| if (psz && *psz) Serial.printf(" Serial: %s\n", psz); | |||
| } | |||
| } | |||
| } | |||
| if (digi1.available()) { | |||
| Serial.print("Mouse: buttons = "); | |||
| Serial.print(digi1.getButtons()); | |||
| Serial.print(", mouseX = "); | |||
| Serial.print(digi1.getMouseX()); | |||
| Serial.print(", mouseY = "); | |||
| Serial.print(digi1.getMouseY()); | |||
| Serial.print(", wheel = "); | |||
| Serial.print(digi1.getWheel()); | |||
| Serial.print(", wheelH = "); | |||
| Serial.print(digi1.getWheelH()); | |||
| Serial.println(); | |||
| digi1.digitizerDataClear(); | |||
| for (uint8_t i = 0; i<10; i++) { | |||
| Serial.printf(" %d:%d", i, digi1.getAxis(i)); | |||
| } | |||
| Serial.println(); | |||
| } | |||
| if (joystick1.available()) { | |||
| uint64_t axis_mask = joystick1.axisMask(); | |||
| uint64_t axis_changed_mask = joystick1.axisChangedMask(); | |||
| Serial.print("Joystick: buttons = "); | |||
| uint32_t buttons = joystick1.getButtons(); | |||
| Serial.print(buttons, HEX); | |||
| //Serial.printf(" AMasks: %x %x:%x", axis_mask, (uint32_t)(user_axis_mask >> 32), (uint32_t)(user_axis_mask & 0xffffffff)); | |||
| //Serial.printf(" M: %lx %lx", axis_mask, joystick1.axisChangedMask()); | |||
| if (show_changed_only) { | |||
| for (uint8_t i = 0; axis_changed_mask != 0; i++, axis_changed_mask >>= 1) { | |||
| if (axis_changed_mask & 1) { | |||
| Serial.printf(" %d:%d", i, joystick1.getAxis(i)); | |||
| } | |||
| } | |||
| } else { | |||
| for (uint8_t i = 0; axis_mask != 0; i++, axis_mask >>= 1) { | |||
| if (axis_mask & 1) { | |||
| Serial.printf(" %d:%d", i, joystick1.getAxis(i)); | |||
| } | |||
| } | |||
| } | |||
| uint8_t ltv; | |||
| uint8_t rtv; | |||
| switch (joystick1.joystickType()) { | |||
| default: | |||
| break; | |||
| case JoystickController::PS4: | |||
| ltv = joystick1.getAxis(3); | |||
| rtv = joystick1.getAxis(4); | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| joystick1.setRumble(ltv, rtv); | |||
| } | |||
| break; | |||
| case JoystickController::PS3: | |||
| ltv = joystick1.getAxis(18); | |||
| rtv = joystick1.getAxis(19); | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| joystick1.setRumble(ltv, rtv, 50); | |||
| } | |||
| break; | |||
| case JoystickController::XBOXONE: | |||
| case JoystickController::XBOX360: | |||
| ltv = joystick1.getAxis(4); | |||
| rtv = joystick1.getAxis(5); | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| joystick1.setRumble(ltv, rtv); | |||
| Serial.printf(" Set Rumble %d %d", ltv, rtv); | |||
| } | |||
| break; | |||
| } | |||
| if (buttons != buttons_prev) { | |||
| if (joystick1.joystickType() == JoystickController::PS3) { | |||
| joystick1.setLEDs((buttons >> 12) & 0xf); // try to get to TRI/CIR/X/SQuare | |||
| } else { | |||
| uint8_t lr = (buttons & 1) ? 0xff : 0; | |||
| uint8_t lg = (buttons & 2) ? 0xff : 0; | |||
| uint8_t lb = (buttons & 4) ? 0xff : 0; | |||
| joystick1.setLEDs(lr, lg, lb); | |||
| } | |||
| buttons_prev = buttons; | |||
| } | |||
| Serial.println(); | |||
| joystick1.joystickDataClear(); | |||
| } | |||
| // See if we have some RAW data | |||
| /* if (rawhid1) { | |||
| int ch; | |||
| uint8_t buffer[64]; | |||
| uint8_t count_chars = 0; | |||
| memset(buffer, 0, sizeof(buffer)); | |||
| if (Serial.available()) { | |||
| while (((ch = Serial.read()) != -1) && (count_chars < sizeof(buffer))) { | |||
| buffer[count_chars++] = ch; | |||
| } | |||
| rawhid1.sendPacket(buffer); | |||
| } | |||
| } | |||
| */ | |||
| } | |||
| void OnPress(int key) | |||
| { | |||
| Serial.print("key '"); | |||
| switch (key) { | |||
| case KEYD_UP : Serial.print("UP"); break; | |||
| case KEYD_DOWN : Serial.print("DN"); break; | |||
| case KEYD_LEFT : Serial.print("LEFT"); break; | |||
| case KEYD_RIGHT : Serial.print("RIGHT"); break; | |||
| case KEYD_INSERT : Serial.print("Ins"); break; | |||
| case KEYD_DELETE : Serial.print("Del"); break; | |||
| case KEYD_PAGE_UP : Serial.print("PUP"); break; | |||
| case KEYD_PAGE_DOWN: Serial.print("PDN"); break; | |||
| case KEYD_HOME : Serial.print("HOME"); break; | |||
| case KEYD_END : Serial.print("END"); break; | |||
| case KEYD_F1 : Serial.print("F1"); break; | |||
| case KEYD_F2 : Serial.print("F2"); break; | |||
| case KEYD_F3 : Serial.print("F3"); break; | |||
| case KEYD_F4 : Serial.print("F4"); break; | |||
| case KEYD_F5 : Serial.print("F5"); break; | |||
| case KEYD_F6 : Serial.print("F6"); break; | |||
| case KEYD_F7 : Serial.print("F7"); break; | |||
| case KEYD_F8 : Serial.print("F8"); break; | |||
| case KEYD_F9 : Serial.print("F9"); break; | |||
| case KEYD_F10 : Serial.print("F10"); break; | |||
| case KEYD_F11 : Serial.print("F11"); break; | |||
| case KEYD_F12 : Serial.print("F12"); break; | |||
| default: Serial.print((char)key); break; | |||
| } | |||
| Serial.print("' "); | |||
| Serial.print(key); | |||
| Serial.print(" MOD: "); | |||
| if (keyboard1) { | |||
| Serial.print(keyboard1.getModifiers(), HEX); | |||
| Serial.print(" OEM: "); | |||
| Serial.print(keyboard1.getOemKey(), HEX); | |||
| Serial.print(" LEDS: "); | |||
| Serial.println(keyboard1.LEDS(), HEX); | |||
| } else { | |||
| Serial.print(keyboard2.getModifiers(), HEX); | |||
| Serial.print(" OEM: "); | |||
| Serial.print(keyboard2.getOemKey(), HEX); | |||
| Serial.print(" LEDS: "); | |||
| Serial.println(keyboard2.LEDS(), HEX); | |||
| } | |||
| //Serial.print("key "); | |||
| //Serial.print((char)keyboard1.getKey()); | |||
| //Serial.print(" "); | |||
| //Serial.print((char)keyboard2.getKey()); | |||
| //Serial.println(); | |||
| } | |||
| void OnHIDExtrasPress(uint32_t top, uint16_t key) | |||
| { | |||
| Serial.print("HID ("); | |||
| Serial.print(top, HEX); | |||
| Serial.print(") key press:"); | |||
| Serial.print(key, HEX); | |||
| if (top == 0xc0000) { | |||
| switch (key) { | |||
| case 0x20 : Serial.print(" - +10"); break; | |||
| case 0x21 : Serial.print(" - +100"); break; | |||
| case 0x22 : Serial.print(" - AM/PM"); break; | |||
| case 0x30 : Serial.print(" - Power"); break; | |||
| case 0x31 : Serial.print(" - Reset"); break; | |||
| case 0x32 : Serial.print(" - Sleep"); break; | |||
| case 0x33 : Serial.print(" - Sleep After"); break; | |||
| case 0x34 : Serial.print(" - Sleep Mode"); break; | |||
| case 0x35 : Serial.print(" - Illumination"); break; | |||
| case 0x36 : Serial.print(" - Function Buttons"); break; | |||
| case 0x40 : Serial.print(" - Menu"); break; | |||
| case 0x41 : Serial.print(" - Menu Pick"); break; | |||
| case 0x42 : Serial.print(" - Menu Up"); break; | |||
| case 0x43 : Serial.print(" - Menu Down"); break; | |||
| case 0x44 : Serial.print(" - Menu Left"); break; | |||
| case 0x45 : Serial.print(" - Menu Right"); break; | |||
| case 0x46 : Serial.print(" - Menu Escape"); break; | |||
| case 0x47 : Serial.print(" - Menu Value Increase"); break; | |||
| case 0x48 : Serial.print(" - Menu Value Decrease"); break; | |||
| case 0x60 : Serial.print(" - Data On Screen"); break; | |||
| case 0x61 : Serial.print(" - Closed Caption"); break; | |||
| case 0x62 : Serial.print(" - Closed Caption Select"); break; | |||
| case 0x63 : Serial.print(" - VCR/TV"); break; | |||
| case 0x64 : Serial.print(" - Broadcast Mode"); break; | |||
| case 0x65 : Serial.print(" - Snapshot"); break; | |||
| case 0x66 : Serial.print(" - Still"); break; | |||
| case 0x80 : Serial.print(" - Selection"); break; | |||
| case 0x81 : Serial.print(" - Assign Selection"); break; | |||
| case 0x82 : Serial.print(" - Mode Step"); break; | |||
| case 0x83 : Serial.print(" - Recall Last"); break; | |||
| case 0x84 : Serial.print(" - Enter Channel"); break; | |||
| case 0x85 : Serial.print(" - Order Movie"); break; | |||
| case 0x86 : Serial.print(" - Channel"); break; | |||
| case 0x87 : Serial.print(" - Media Selection"); break; | |||
| case 0x88 : Serial.print(" - Media Select Computer"); break; | |||
| case 0x89 : Serial.print(" - Media Select TV"); break; | |||
| case 0x8A : Serial.print(" - Media Select WWW"); break; | |||
| case 0x8B : Serial.print(" - Media Select DVD"); break; | |||
| case 0x8C : Serial.print(" - Media Select Telephone"); break; | |||
| case 0x8D : Serial.print(" - Media Select Program Guide"); break; | |||
| case 0x8E : Serial.print(" - Media Select Video Phone"); break; | |||
| case 0x8F : Serial.print(" - Media Select Games"); break; | |||
| case 0x90 : Serial.print(" - Media Select Messages"); break; | |||
| case 0x91 : Serial.print(" - Media Select CD"); break; | |||
| case 0x92 : Serial.print(" - Media Select VCR"); break; | |||
| case 0x93 : Serial.print(" - Media Select Tuner"); break; | |||
| case 0x94 : Serial.print(" - Quit"); break; | |||
| case 0x95 : Serial.print(" - Help"); break; | |||
| case 0x96 : Serial.print(" - Media Select Tape"); break; | |||
| case 0x97 : Serial.print(" - Media Select Cable"); break; | |||
| case 0x98 : Serial.print(" - Media Select Satellite"); break; | |||
| case 0x99 : Serial.print(" - Media Select Security"); break; | |||
| case 0x9A : Serial.print(" - Media Select Home"); break; | |||
| case 0x9B : Serial.print(" - Media Select Call"); break; | |||
| case 0x9C : Serial.print(" - Channel Increment"); break; | |||
| case 0x9D : Serial.print(" - Channel Decrement"); break; | |||
| case 0x9E : Serial.print(" - Media Select SAP"); break; | |||
| case 0xA0 : Serial.print(" - VCR Plus"); break; | |||
| case 0xA1 : Serial.print(" - Once"); break; | |||
| case 0xA2 : Serial.print(" - Daily"); break; | |||
| case 0xA3 : Serial.print(" - Weekly"); break; | |||
| case 0xA4 : Serial.print(" - Monthly"); break; | |||
| case 0xB0 : Serial.print(" - Play"); break; | |||
| case 0xB1 : Serial.print(" - Pause"); break; | |||
| case 0xB2 : Serial.print(" - Record"); break; | |||
| case 0xB3 : Serial.print(" - Fast Forward"); break; | |||
| case 0xB4 : Serial.print(" - Rewind"); break; | |||
| case 0xB5 : Serial.print(" - Scan Next Track"); break; | |||
| case 0xB6 : Serial.print(" - Scan Previous Track"); break; | |||
| case 0xB7 : Serial.print(" - Stop"); break; | |||
| case 0xB8 : Serial.print(" - Eject"); break; | |||
| case 0xB9 : Serial.print(" - Random Play"); break; | |||
| case 0xBA : Serial.print(" - Select DisC"); break; | |||
| case 0xBB : Serial.print(" - Enter Disc"); break; | |||
| case 0xBC : Serial.print(" - Repeat"); break; | |||
| case 0xBD : Serial.print(" - Tracking"); break; | |||
| case 0xBE : Serial.print(" - Track Normal"); break; | |||
| case 0xBF : Serial.print(" - Slow Tracking"); break; | |||
| case 0xC0 : Serial.print(" - Frame Forward"); break; | |||
| case 0xC1 : Serial.print(" - Frame Back"); break; | |||
| case 0xC2 : Serial.print(" - Mark"); break; | |||
| case 0xC3 : Serial.print(" - Clear Mark"); break; | |||
| case 0xC4 : Serial.print(" - Repeat From Mark"); break; | |||
| case 0xC5 : Serial.print(" - Return To Mark"); break; | |||
| case 0xC6 : Serial.print(" - Search Mark Forward"); break; | |||
| case 0xC7 : Serial.print(" - Search Mark Backwards"); break; | |||
| case 0xC8 : Serial.print(" - Counter Reset"); break; | |||
| case 0xC9 : Serial.print(" - Show Counter"); break; | |||
| case 0xCA : Serial.print(" - Tracking Increment"); break; | |||
| case 0xCB : Serial.print(" - Tracking Decrement"); break; | |||
| case 0xCD : Serial.print(" - Pause/Continue"); break; | |||
| case 0xE0 : Serial.print(" - Volume"); break; | |||
| case 0xE1 : Serial.print(" - Balance"); break; | |||
| case 0xE2 : Serial.print(" - Mute"); break; | |||
| case 0xE3 : Serial.print(" - Bass"); break; | |||
| case 0xE4 : Serial.print(" - Treble"); break; | |||
| case 0xE5 : Serial.print(" - Bass Boost"); break; | |||
| case 0xE6 : Serial.print(" - Surround Mode"); break; | |||
| case 0xE7 : Serial.print(" - Loudness"); break; | |||
| case 0xE8 : Serial.print(" - MPX"); break; | |||
| case 0xE9 : Serial.print(" - Volume Up"); break; | |||
| case 0xEA : Serial.print(" - Volume Down"); break; | |||
| case 0xF0 : Serial.print(" - Speed Select"); break; | |||
| case 0xF1 : Serial.print(" - Playback Speed"); break; | |||
| case 0xF2 : Serial.print(" - Standard Play"); break; | |||
| case 0xF3 : Serial.print(" - Long Play"); break; | |||
| case 0xF4 : Serial.print(" - Extended Play"); break; | |||
| case 0xF5 : Serial.print(" - Slow"); break; | |||
| case 0x100: Serial.print(" - Fan Enable"); break; | |||
| case 0x101: Serial.print(" - Fan Speed"); break; | |||
| case 0x102: Serial.print(" - Light"); break; | |||
| case 0x103: Serial.print(" - Light Illumination Level"); break; | |||
| case 0x104: Serial.print(" - Climate Control Enable"); break; | |||
| case 0x105: Serial.print(" - Room Temperature"); break; | |||
| case 0x106: Serial.print(" - Security Enable"); break; | |||
| case 0x107: Serial.print(" - Fire Alarm"); break; | |||
| case 0x108: Serial.print(" - Police Alarm"); break; | |||
| case 0x150: Serial.print(" - Balance Right"); break; | |||
| case 0x151: Serial.print(" - Balance Left"); break; | |||
| case 0x152: Serial.print(" - Bass Increment"); break; | |||
| case 0x153: Serial.print(" - Bass Decrement"); break; | |||
| case 0x154: Serial.print(" - Treble Increment"); break; | |||
| case 0x155: Serial.print(" - Treble Decrement"); break; | |||
| case 0x160: Serial.print(" - Speaker System"); break; | |||
| case 0x161: Serial.print(" - Channel Left"); break; | |||
| case 0x162: Serial.print(" - Channel Right"); break; | |||
| case 0x163: Serial.print(" - Channel Center"); break; | |||
| case 0x164: Serial.print(" - Channel Front"); break; | |||
| case 0x165: Serial.print(" - Channel Center Front"); break; | |||
| case 0x166: Serial.print(" - Channel Side"); break; | |||
| case 0x167: Serial.print(" - Channel Surround"); break; | |||
| case 0x168: Serial.print(" - Channel Low Frequency Enhancement"); break; | |||
| case 0x169: Serial.print(" - Channel Top"); break; | |||
| case 0x16A: Serial.print(" - Channel Unknown"); break; | |||
| case 0x170: Serial.print(" - Sub-channel"); break; | |||
| case 0x171: Serial.print(" - Sub-channel Increment"); break; | |||
| case 0x172: Serial.print(" - Sub-channel Decrement"); break; | |||
| case 0x173: Serial.print(" - Alternate Audio Increment"); break; | |||
| case 0x174: Serial.print(" - Alternate Audio Decrement"); break; | |||
| case 0x180: Serial.print(" - Application Launch Buttons"); break; | |||
| case 0x181: Serial.print(" - AL Launch Button Configuration Tool"); break; | |||
| case 0x182: Serial.print(" - AL Programmable Button Configuration"); break; | |||
| case 0x183: Serial.print(" - AL Consumer Control Configuration"); break; | |||
| case 0x184: Serial.print(" - AL Word Processor"); break; | |||
| case 0x185: Serial.print(" - AL Text Editor"); break; | |||
| case 0x186: Serial.print(" - AL Spreadsheet"); break; | |||
| case 0x187: Serial.print(" - AL Graphics Editor"); break; | |||
| case 0x188: Serial.print(" - AL Presentation App"); break; | |||
| case 0x189: Serial.print(" - AL Database App"); break; | |||
| case 0x18A: Serial.print(" - AL Email Reader"); break; | |||
| case 0x18B: Serial.print(" - AL Newsreader"); break; | |||
| case 0x18C: Serial.print(" - AL Voicemail"); break; | |||
| case 0x18D: Serial.print(" - AL Contacts/Address Book"); break; | |||
| case 0x18E: Serial.print(" - AL Calendar/Schedule"); break; | |||
| case 0x18F: Serial.print(" - AL Task/Project Manager"); break; | |||
| case 0x190: Serial.print(" - AL Log/Journal/Timecard"); break; | |||
| case 0x191: Serial.print(" - AL Checkbook/Finance"); break; | |||
| case 0x192: Serial.print(" - AL Calculator"); break; | |||
| case 0x193: Serial.print(" - AL A/V Capture/Playback"); break; | |||
| case 0x194: Serial.print(" - AL Local Machine Browser"); break; | |||
| case 0x195: Serial.print(" - AL LAN/WAN Browser"); break; | |||
| case 0x196: Serial.print(" - AL Internet Browser"); break; | |||
| case 0x197: Serial.print(" - AL Remote Networking/ISP Connect"); break; | |||
| case 0x198: Serial.print(" - AL Network Conference"); break; | |||
| case 0x199: Serial.print(" - AL Network Chat"); break; | |||
| case 0x19A: Serial.print(" - AL Telephony/Dialer"); break; | |||
| case 0x19B: Serial.print(" - AL Logon"); break; | |||
| case 0x19C: Serial.print(" - AL Logoff"); break; | |||
| case 0x19D: Serial.print(" - AL Logon/Logoff"); break; | |||
| case 0x19E: Serial.print(" - AL Terminal Lock/Screensaver"); break; | |||
| case 0x19F: Serial.print(" - AL Control Panel"); break; | |||
| case 0x1A0: Serial.print(" - AL Command Line Processor/Run"); break; | |||
| case 0x1A1: Serial.print(" - AL Process/Task Manager"); break; | |||
| case 0x1A2: Serial.print(" - AL Select Tast/Application"); break; | |||
| case 0x1A3: Serial.print(" - AL Next Task/Application"); break; | |||
| case 0x1A4: Serial.print(" - AL Previous Task/Application"); break; | |||
| case 0x1A5: Serial.print(" - AL Preemptive Halt Task/Application"); break; | |||
| case 0x200: Serial.print(" - Generic GUI Application Controls"); break; | |||
| case 0x201: Serial.print(" - AC New"); break; | |||
| case 0x202: Serial.print(" - AC Open"); break; | |||
| case 0x203: Serial.print(" - AC Close"); break; | |||
| case 0x204: Serial.print(" - AC Exit"); break; | |||
| case 0x205: Serial.print(" - AC Maximize"); break; | |||
| case 0x206: Serial.print(" - AC Minimize"); break; | |||
| case 0x207: Serial.print(" - AC Save"); break; | |||
| case 0x208: Serial.print(" - AC Print"); break; | |||
| case 0x209: Serial.print(" - AC Properties"); break; | |||
| case 0x21A: Serial.print(" - AC Undo"); break; | |||
| case 0x21B: Serial.print(" - AC Copy"); break; | |||
| case 0x21C: Serial.print(" - AC Cut"); break; | |||
| case 0x21D: Serial.print(" - AC Paste"); break; | |||
| case 0x21E: Serial.print(" - AC Select All"); break; | |||
| case 0x21F: Serial.print(" - AC Find"); break; | |||
| case 0x220: Serial.print(" - AC Find and Replace"); break; | |||
| case 0x221: Serial.print(" - AC Search"); break; | |||
| case 0x222: Serial.print(" - AC Go To"); break; | |||
| case 0x223: Serial.print(" - AC Home"); break; | |||
| case 0x224: Serial.print(" - AC Back"); break; | |||
| case 0x225: Serial.print(" - AC Forward"); break; | |||
| case 0x226: Serial.print(" - AC Stop"); break; | |||
| case 0x227: Serial.print(" - AC Refresh"); break; | |||
| case 0x228: Serial.print(" - AC Previous Link"); break; | |||
| case 0x229: Serial.print(" - AC Next Link"); break; | |||
| case 0x22A: Serial.print(" - AC Bookmarks"); break; | |||
| case 0x22B: Serial.print(" - AC History"); break; | |||
| case 0x22C: Serial.print(" - AC Subscriptions"); break; | |||
| case 0x22D: Serial.print(" - AC Zoom In"); break; | |||
| case 0x22E: Serial.print(" - AC Zoom Out"); break; | |||
| case 0x22F: Serial.print(" - AC Zoom"); break; | |||
| case 0x230: Serial.print(" - AC Full Screen View"); break; | |||
| case 0x231: Serial.print(" - AC Normal View"); break; | |||
| case 0x232: Serial.print(" - AC View Toggle"); break; | |||
| case 0x233: Serial.print(" - AC Scroll Up"); break; | |||
| case 0x234: Serial.print(" - AC Scroll Down"); break; | |||
| case 0x235: Serial.print(" - AC Scroll"); break; | |||
| case 0x236: Serial.print(" - AC Pan Left"); break; | |||
| case 0x237: Serial.print(" - AC Pan Right"); break; | |||
| case 0x238: Serial.print(" - AC Pan"); break; | |||
| case 0x239: Serial.print(" - AC New Window"); break; | |||
| case 0x23A: Serial.print(" - AC Tile Horizontally"); break; | |||
| case 0x23B: Serial.print(" - AC Tile Vertically"); break; | |||
| case 0x23C: Serial.print(" - AC Format"); break; | |||
| } | |||
| } | |||
| Serial.println(); | |||
| } | |||
| void OnHIDExtrasRelease(uint32_t top, uint16_t key) | |||
| { | |||
| Serial.print("HID ("); | |||
| Serial.print(top, HEX); | |||
| Serial.print(") key release:"); | |||
| Serial.println(key, HEX); | |||
| } | |||
| bool OnReceiveHidData(uint32_t usage, const uint8_t *data, uint32_t len) { | |||
| // Called for maybe both HIDS for rawhid basic test. One is for the Teensy | |||
| // to output to Serial. while still having Raw Hid... | |||
| if (usage == 0xffc90004) { | |||
| // Lets trim off trailing null characters. | |||
| while ((len > 0) && (data[len - 1] == 0)) { | |||
| len--; | |||
| } | |||
| if (len) { | |||
| Serial.print("RawHid Serial: "); | |||
| Serial.write(data, len); | |||
| } | |||
| } else { | |||
| Serial.print("RawHIDx data: "); | |||
| Serial.println(usage, HEX); | |||
| uint8_t len1 = len; | |||
| for(int j = 0; j < len; j++){ | |||
| user_axis[j] = data[j]; | |||
| } | |||
| /* | |||
| while (len) { | |||
| uint8_t cb = (len > 16) ? 16 : len; | |||
| const uint8_t *p = data; | |||
| uint8_t i; | |||
| for (i = 0; i < cb; i++) { | |||
| Serial.printf("%02x ", *p++); | |||
| } | |||
| Serial.print(": "); | |||
| for (i = 0; i < cb; i++) { | |||
| Serial.write(((*data >= ' ') && (*data <= '~')) ? *data : '.'); | |||
| data++; | |||
| } | |||
| len -= cb; | |||
| Serial.println(); | |||
| } | |||
| */ | |||
| } | |||
| for (uint8_t i = 0; i<9; i++) { | |||
| Serial.printf(" %d:%d", i, user_axis[i]); | |||
| } | |||
| Serial.println(); | |||
| Serial.print("Mouse: buttons = "); | |||
| Serial.print(user_axis[3]); | |||
| Serial.print(", mouseX = "); | |||
| Serial.print(user_axis[4]); | |||
| Serial.print(", mouseY = "); | |||
| Serial.print(user_axis[5]); | |||
| Serial.println(); | |||
| return true; | |||
| } | |||
+ 1
- 0
examples/Digitizer/defs.h
Переглянути файл
| @@ -0,0 +1 @@ | |||
examples/Joystick/Joystick.ino → examples/Serial/Joystick/Joystick.ino
Переглянути файл
| @@ -97,7 +97,7 @@ void loop() | |||
| } | |||
| uint8_t ltv; | |||
| uint8_t rtv; | |||
| switch (joysticks[joystick_index].joystickType) { | |||
| switch (joysticks[joystick_index].joystickType()) { | |||
| default: | |||
| break; | |||
| case JoystickController::PS4: | |||
| @@ -133,7 +133,7 @@ void loop() | |||
| break; | |||
| } | |||
| if (buttons != buttons_prev) { | |||
| if (joysticks[joystick_index].joystickType == JoystickController::PS3) { | |||
| if (joysticks[joystick_index].joystickType() == JoystickController::PS3) { | |||
| joysticks[joystick_index].setLEDs((buttons >> 12) & 0xf); // try to get to TRI/CIR/X/SQuare | |||
| } else { | |||
| uint8_t lr = (buttons & 1) ? 0xff : 0; | |||
+ 209
- 0
examples/Serial/Joystick/Joystick/Joystick.ino
Переглянути файл
| @@ -0,0 +1,209 @@ | |||
| // Simple test of USB Host Joystick | |||
| // | |||
| // This example is in the public domain | |||
| #include "USBHost_t36.h" | |||
| USBHost myusb; | |||
| USBHub hub1(myusb); | |||
| USBHIDParser hid1(myusb); | |||
| #define COUNT_JOYSTICKS 4 | |||
| JoystickController joysticks[COUNT_JOYSTICKS](myusb); | |||
| int user_axis[64]; | |||
| uint32_t buttons_prev = 0; | |||
| USBDriver *drivers[] = {&hub1, &joysticks[0], &joysticks[1], &joysticks[2], &joysticks[3], &hid1}; | |||
| #define CNT_DEVICES (sizeof(drivers)/sizeof(drivers[0])) | |||
| const char * driver_names[CNT_DEVICES] = {"Hub1", "joystick[0D]", "joystick[1D]", "joystick[2D]", "joystick[3D]", "HID1"}; | |||
| bool driver_active[CNT_DEVICES] = {false, false, false, false}; | |||
| // Lets also look at HID Input devices | |||
| USBHIDInput *hiddrivers[] = {&joysticks[0], &joysticks[1], &joysticks[2], &joysticks[3]}; | |||
| #define CNT_HIDDEVICES (sizeof(hiddrivers)/sizeof(hiddrivers[0])) | |||
| const char * hid_driver_names[CNT_DEVICES] = {"joystick[0H]", "joystick[1H]", "joystick[2H]", "joystick[3H]"}; | |||
| bool hid_driver_active[CNT_DEVICES] = {false}; | |||
| bool show_changed_only = false; | |||
| uint8_t joystick_left_trigger_value[COUNT_JOYSTICKS] = {0}; | |||
| uint8_t joystick_right_trigger_value[COUNT_JOYSTICKS] = {0}; | |||
| uint64_t joystick_full_notify_mask = (uint64_t) - 1; | |||
| int psAxis[64]; | |||
| //============================================================================= | |||
| // Setup | |||
| //============================================================================= | |||
| void setup() | |||
| { | |||
| Serial1.begin(2000000); | |||
| while (!Serial) ; // wait for Arduino Serial Monitor | |||
| Serial.println("\n\nUSB Host Joystick Testing"); | |||
| myusb.begin(); | |||
| } | |||
| //============================================================================= | |||
| // loop | |||
| //============================================================================= | |||
| void loop() | |||
| { | |||
| myusb.Task(); | |||
| PrintDeviceListChanges(); | |||
| if (Serial.available()) { | |||
| int ch = Serial.read(); // get the first char. | |||
| while (Serial.read() != -1) ; | |||
| if ((ch == 'b') || (ch == 'B')) { | |||
| Serial.println("Only notify on Basic Axis changes"); | |||
| for (int joystick_index = 0; joystick_index < COUNT_JOYSTICKS; joystick_index++) | |||
| joysticks[joystick_index].axisChangeNotifyMask(0x3ff); | |||
| } else if ((ch == 'f') || (ch == 'F')) { | |||
| Serial.println("Only notify on Full Axis changes"); | |||
| for (int joystick_index = 0; joystick_index < COUNT_JOYSTICKS; joystick_index++) | |||
| joysticks[joystick_index].axisChangeNotifyMask(joystick_full_notify_mask); | |||
| } else { | |||
| if (show_changed_only) { | |||
| show_changed_only = false; | |||
| Serial.println("\n*** Show All fields mode ***"); | |||
| } else { | |||
| show_changed_only = true; | |||
| Serial.println("\n*** Show only changed fields mode ***"); | |||
| } | |||
| } | |||
| } | |||
| for (int joystick_index = 0; joystick_index < COUNT_JOYSTICKS; joystick_index++) { | |||
| if (joysticks[joystick_index].available()) { | |||
| uint64_t axis_mask = joysticks[joystick_index].axisMask(); | |||
| uint64_t axis_changed_mask = joysticks[joystick_index].axisChangedMask(); | |||
| uint32_t buttons = joysticks[joystick_index].getButtons(); | |||
| Serial.printf("Joystick(%d): buttons = %x", joystick_index, buttons); | |||
| //Serial.printf(" AMasks: %x %x:%x", axis_mask, (uint32_t)(user_axis_mask >> 32), (uint32_t)(user_axis_mask & 0xffffffff)); | |||
| //Serial.printf(" M: %lx %lx", axis_mask, joysticks[joystick_index].axisChangedMask()); | |||
| if (show_changed_only) { | |||
| for (uint8_t i = 0; axis_changed_mask != 0; i++, axis_changed_mask >>= 1) { | |||
| if (axis_changed_mask & 1) { | |||
| Serial.printf(" %d:%d", i, joysticks[joystick_index].getAxis(i)); | |||
| } | |||
| } | |||
| } else { | |||
| for (uint8_t i = 0; axis_mask != 0; i++, axis_mask >>= 1) { | |||
| if (axis_mask & 1) { | |||
| Serial.printf(" %d:%d", i, joysticks[joystick_index].getAxis(i)); | |||
| } | |||
| } | |||
| } | |||
| uint8_t ltv; | |||
| uint8_t rtv; | |||
| for (uint8_t i = 0; i<64; i++) { | |||
| psAxis[i] = joysticks[joystick_index].getAxis(i); | |||
| } | |||
| switch (joysticks[joystick_index].joystickType()) { | |||
| default: | |||
| break; | |||
| case JoystickController::PS4: | |||
| printAngles(); | |||
| ltv = joysticks[joystick_index].getAxis(3); | |||
| rtv = joysticks[joystick_index].getAxis(4); | |||
| if ((ltv != joystick_left_trigger_value[joystick_index]) || (rtv != joystick_right_trigger_value[joystick_index])) { | |||
| joystick_left_trigger_value[joystick_index] = ltv; | |||
| joystick_right_trigger_value[joystick_index] = rtv; | |||
| joysticks[joystick_index].setRumble(ltv, rtv); | |||
| } | |||
| break; | |||
| case JoystickController::PS3: | |||
| ltv = joysticks[joystick_index].getAxis(18); | |||
| rtv = joysticks[joystick_index].getAxis(19); | |||
| if ((ltv != joystick_left_trigger_value[joystick_index]) || (rtv != joystick_right_trigger_value[joystick_index])) { | |||
| joystick_left_trigger_value[joystick_index] = ltv; | |||
| joystick_right_trigger_value[joystick_index] = rtv; | |||
| joysticks[joystick_index].setRumble(ltv, rtv,50); | |||
| } | |||
| break; | |||
| case JoystickController::XBOXONE: | |||
| case JoystickController::XBOX360: | |||
| ltv = joysticks[joystick_index].getAxis(3); | |||
| rtv = joysticks[joystick_index].getAxis(4); | |||
| if ((ltv != joystick_left_trigger_value[joystick_index]) || (rtv != joystick_right_trigger_value[joystick_index])) { | |||
| joystick_left_trigger_value[joystick_index] = ltv; | |||
| joystick_right_trigger_value[joystick_index] = rtv; | |||
| joysticks[joystick_index].setRumble(ltv, rtv,50); | |||
| Serial.printf(" Set Rumble %d %d", ltv, rtv); | |||
| } | |||
| break; | |||
| } | |||
| if (buttons != buttons_prev) { | |||
| if (joysticks[joystick_index].joystickType() == JoystickController::PS3) { | |||
| //joysticks[joystick_index].setLEDs((buttons >> 12) & 0xf); // try to get to TRI/CIR/X/SQuare | |||
| uint8_t leds = 0; | |||
| if (buttons & 0x8000) leds = 1; //Srq | |||
| if (buttons & 0x2000) leds = 2; //Cir | |||
| if (buttons & 0x1000) leds = 4; //Tri | |||
| if (buttons & 0x4000) leds = 8; //X //Tri | |||
| joysticks[joystick_index].setLEDs(leds); | |||
| } else { | |||
| uint8_t lr = (buttons & 1) ? 0xff : 0; | |||
| uint8_t lg = (buttons & 2) ? 0xff : 0; | |||
| uint8_t lb = (buttons & 4) ? 0xff : 0; | |||
| joysticks[joystick_index].setLEDs(lr, lg, lb); | |||
| } | |||
| buttons_prev = buttons; | |||
| } | |||
| Serial.println(); | |||
| joysticks[joystick_index].joystickDataClear(); | |||
| } | |||
| } | |||
| } | |||
| //============================================================================= | |||
| // Show when devices are added or removed | |||
| //============================================================================= | |||
| void PrintDeviceListChanges() { | |||
| for (uint8_t i = 0; i < CNT_DEVICES; i++) { | |||
| if (*drivers[i] != driver_active[i]) { | |||
| if (driver_active[i]) { | |||
| Serial.printf("*** Device %s - disconnected ***\n", driver_names[i]); | |||
| driver_active[i] = false; | |||
| } else { | |||
| Serial.printf("*** Device %s %x:%x - connected ***\n", driver_names[i], drivers[i]->idVendor(), drivers[i]->idProduct()); | |||
| driver_active[i] = true; | |||
| const uint8_t *psz = drivers[i]->manufacturer(); | |||
| if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz); | |||
| psz = drivers[i]->product(); | |||
| if (psz && *psz) Serial.printf(" product: %s\n", psz); | |||
| psz = drivers[i]->serialNumber(); | |||
| if (psz && *psz) Serial.printf(" Serial: %s\n", psz); | |||
| } | |||
| } | |||
| } | |||
| for (uint8_t i = 0; i < CNT_HIDDEVICES; i++) { | |||
| if (*hiddrivers[i] != hid_driver_active[i]) { | |||
| if (hid_driver_active[i]) { | |||
| Serial.printf("*** HID Device %s - disconnected ***\n", hid_driver_names[i]); | |||
| hid_driver_active[i] = false; | |||
| } else { | |||
| Serial.printf("*** HID Device %s %x:%x - connected ***\n", hid_driver_names[i], hiddrivers[i]->idVendor(), hiddrivers[i]->idProduct()); | |||
| hid_driver_active[i] = true; | |||
| const uint8_t *psz = hiddrivers[i]->manufacturer(); | |||
| if (psz && *psz) Serial.printf(" manufacturer: %s\n", psz); | |||
| psz = hiddrivers[i]->product(); | |||
| if (psz && *psz) Serial.printf(" product: %s\n", psz); | |||
| psz = hiddrivers[i]->serialNumber(); | |||
| if (psz && *psz) Serial.printf(" Serial: %s\n", psz); | |||
| } | |||
| } | |||
| } | |||
| } | |||
+ 65
- 0
examples/Serial/Joystick/Joystick/ps4Helpers.ino
Переглянути файл
| @@ -0,0 +1,65 @@ | |||
| float gx, gy, gz; | |||
| float ax, ay, az; | |||
| float pitch, roll; | |||
| uint16_t xc, yc; | |||
| uint8_t isTouch; | |||
| int16_t xc_old, yc_old; | |||
| void printAngles(){ | |||
| //test function calls | |||
| float gx, gy, gz; | |||
| getAccel(ax, ay, az); | |||
| Serial.printf("Accel-g's: %f, %f, %f\n", ax, ay, az); | |||
| getGyro(gx, gy, gz); | |||
| Serial.printf("Gyro-deg/sec: %f, %f, %f\n", gx, gy, gz); | |||
| getAngles(pitch, roll); | |||
| Serial.printf("Pitch/Roll: %f, %f\n", pitch, roll); | |||
| getCoords(xc, yc, isTouch); | |||
| } | |||
| void getCoords(uint16_t &xc, uint16_t &yc, uint8_t &isTouch){ | |||
| //uint8_t finger = 0; //only getting finger 1 | |||
| uint8_t Id = 0; | |||
| // Trackpad touch 1: id, active, x, y | |||
| xc = ((psAxis[37] & 0x0f) << 8) | psAxis[36]; | |||
| yc = psAxis[38] << 4 | ((psAxis[37] & 0xf0) >> 4), | |||
| isTouch = psAxis[35] >> 7; | |||
| if(xc != xc_old || yc != yc_old){ | |||
| Serial.printf("Touch: %d, %d, %d, %d\n", psAxis[33], isTouch, xc, yc); | |||
| xc_old = xc; | |||
| yc_old = yc; | |||
| } | |||
| } | |||
| void getAccel( float &ax, float &ay, float &az){ | |||
| int accelx = (int16_t)(psAxis[20]<<8) | psAxis[19]; | |||
| int accelz = (int16_t)(psAxis[22]<<8) | psAxis[21]; | |||
| int accely = (int16_t)(psAxis[24]<<8) | psAxis[23]; | |||
| ax = (float) accelx/8192; | |||
| ay = (float) accely/8192; | |||
| az = (float) accelz/8192; | |||
| } | |||
| void getAngles(float &p, float &r){ | |||
| getAccel( ax, ay, az); | |||
| p = (atan2f(ay, az) + PI) * RAD_TO_DEG; | |||
| r = (atan2f(ax, az) + PI) * RAD_TO_DEG; | |||
| } | |||
| void getGyro(float &gx, float &gy, float &gz){ | |||
| int gyroy = (int16_t)(psAxis[14]<<8) | psAxis[13]; | |||
| int gyroz = (int16_t)(psAxis[16]<<8) | psAxis[15]; | |||
| int gyrox = (int16_t)(psAxis[18]<<8) | psAxis[17]; | |||
| gx = (float) gyrox * RAD_TO_DEG/1024; | |||
| gy = (float) gyroy * RAD_TO_DEG/1024; | |||
| gz = (float) gyroz * RAD_TO_DEG/1024; | |||
| } | |||
examples/MIDI/InputFunctions/InputFunctions.ino → examples/Serial/MIDI/InputFunctions/InputFunctions.ino
Переглянути файл
examples/MIDI/Interface_16x16/Interface_16x16.ino → examples/Serial/MIDI/Interface_16x16/Interface_16x16.ino
Переглянути файл
examples/Mouse/Mouse.ino → examples/Serial/Mouse/Mouse.ino
Переглянути файл
| @@ -16,14 +16,16 @@ USBHIDParser hid4(myusb); | |||
| USBHIDParser hid5(myusb); | |||
| MouseController mouse1(myusb); | |||
| JoystickController joystick1(myusb); | |||
| //BluetoothController bluet(myusb, true, "0000"); // Version does pairing to device | |||
| BluetoothController bluet(myusb); // version assumes it already was paired | |||
| int user_axis[64]; | |||
| uint32_t buttons_prev = 0; | |||
| RawHIDController rawhid1(myusb); | |||
| RawHIDController rawhid2(myusb, 0xffc90004); | |||
| USBDriver *drivers[] = {&hub1, &hub2, &keyboard1, &keyboard2, &joystick1, &hid1, &hid2, &hid3, &hid4, &hid5}; | |||
| USBDriver *drivers[] = {&hub1, &hub2,&keyboard1, &keyboard2, &joystick1, &bluet, &hid1, &hid2, &hid3, &hid4, &hid5}; | |||
| #define CNT_DEVICES (sizeof(drivers)/sizeof(drivers[0])) | |||
| const char * driver_names[CNT_DEVICES] = {"Hub1", "Hub2", "KB1", "KB2", "JOY1D", "HID1", "HID2", "HID3", "HID4", "HID5"}; | |||
| const char * driver_names[CNT_DEVICES] = {"Hub1","Hub2", "KB1", "KB2", "JOY1D", "Bluet", "HID1" , "HID2", "HID3", "HID4", "HID5"}; | |||
| bool driver_active[CNT_DEVICES] = {false, false, false, false}; | |||
| // Lets also look at HID Input devices | |||
| @@ -176,7 +178,7 @@ void loop() | |||
| } | |||
| uint8_t ltv; | |||
| uint8_t rtv; | |||
| switch (joystick1.joystickType) { | |||
| switch (joystick1.joystickType()) { | |||
| default: | |||
| break; | |||
| case JoystickController::PS4: | |||
| @@ -212,7 +214,7 @@ void loop() | |||
| break; | |||
| } | |||
| if (buttons != buttons_prev) { | |||
| if (joystick1.joystickType == JoystickController::PS3) { | |||
| if (joystick1.joystickType() == JoystickController::PS3) { | |||
| joystick1.setLEDs((buttons >> 12) & 0xf); // try to get to TRI/CIR/X/SQuare | |||
| } else { | |||
| uint8_t lr = (buttons & 1) ? 0xff : 0; | |||
examples/Mouse/defs.h → examples/Serial/Mouse/defs.h
Переглянути файл
examples/SerialTest/SerialTest.ino → examples/Test/SerialTest/SerialTest.ino
Переглянути файл
examples/SerialTest/defs.h → examples/Test/SerialTest/defs.h
Переглянути файл
examples/Test/Test.ino → examples/Test/Test/Test.ino
Переглянути файл
+ 970
- 0
examples/USBHost_viewer/USBHost_viewer.ino
Переглянути файл
| @@ -0,0 +1,970 @@ | |||
| //============================================================================= | |||
| // Simple test viewer app for several of the USB devices on ili9341 display | |||
| // | |||
| // Currently requires the libraries | |||
| // ili9341_t3n that can be located: https://github.com/KurtE/ILI9341_t3n | |||
| // spin: https://github.com/KurtE/SPIN | |||
| // | |||
| // Teensy 3.6 Pins | |||
| // 8 = RST | |||
| // 9 = D/C | |||
| // 10 = CS | |||
| // | |||
| // Teensy 4.0 Beta Pins | |||
| // 23 = RST (Marked MCLK on T4 beta breakout) | |||
| // 10 = CS (Marked CS) | |||
| // 9 = DC (Marked MEMCS) | |||
| // | |||
| // This example is in the public domain | |||
| //============================================================================= | |||
| #include "USBHost_t36.h" | |||
| #include <ili9341_t3n_font_Arial.h> | |||
| #define TEENSY64 | |||
| //============================================================================= | |||
| // Connection configuration of ILI9341 LCD TFT | |||
| //============================================================================= | |||
| DMAMEM uint16_t frame_buffer[ILI9341_TFTWIDTH * ILI9341_TFTHEIGHT]; | |||
| #if defined(__MK66FX1M0__) && !defined(TEENSY64) | |||
| #define TFT_RST 255 | |||
| #define TFT_DC 20 | |||
| #define TFT_CS 21 | |||
| ILI9341_t3n tft = ILI9341_t3n(TFT_CS, TFT_DC, TFT_RST); | |||
| #elif defined(__IMXRT1052__) || defined(__IMXRT1062__) | |||
| // On Teensy 4 beta with Paul's breakout out: | |||
| // Using pins (MOSI, MISO, SCK which are labeled on Audio board breakout location | |||
| // which are not in the Normal processor positions | |||
| // Also DC=10(CS), CS=9(BCLK) and RST 23(MCLK) | |||
| #define TFT_RST 23 | |||
| #define TFT_DC 9 | |||
| #define TFT_CS 10 | |||
| ILI9341_t3n tft = ILI9341_t3n(TFT_CS, TFT_DC, TFT_RST); | |||
| #elif defined(TEENSY64) | |||
| #define TFT_RST 255 | |||
| #define TFT_DC 20 | |||
| #define TFT_CS 21 | |||
| #define TFT_SCK 14 | |||
| #define TFT_MISO 39 | |||
| #define TFT_MOSI 28 | |||
| ILI9341_t3n tft = ILI9341_t3n(TFT_CS, TFT_DC, TFT_RST, TFT_MOSI, TFT_SCK, TFT_MISO); | |||
| #else | |||
| #error "This example App will only work with Teensy 3.6 or Teensy 4." | |||
| #endif | |||
| //============================================================================= | |||
| // USB Host Ojbects | |||
| //============================================================================= | |||
| USBHost myusb; | |||
| USBHub hub1(myusb); | |||
| USBHub hub2(myusb); | |||
| KeyboardController keyboard1(myusb); | |||
| KeyboardController keyboard2(myusb); | |||
| USBHIDParser hid1(myusb); | |||
| USBHIDParser hid2(myusb); | |||
| USBHIDParser hid3(myusb); | |||
| USBHIDParser hid4(myusb); | |||
| USBHIDParser hid5(myusb); | |||
| MouseController mouse(myusb); | |||
| DigitizerController tablet(myusb); | |||
| JoystickController joystick(myusb); | |||
| BluetoothController bluet(myusb, true, "0000"); // Version does pairing to device | |||
| //BluetoothController bluet(myusb); // version assumes it already was paired | |||
| RawHIDController rawhid2(myusb); | |||
| // Lets only include in the lists The most top level type devices we wish to show information for. | |||
| //USBDriver *drivers[] = {&keyboard1, &keyboard2, &joystick}; | |||
| USBDriver *drivers[] = {&keyboard1, &keyboard2, &joystick, &bluet, &hid1, &hid2}; | |||
| #define CNT_DEVICES (sizeof(drivers)/sizeof(drivers[0])) | |||
| //const char * driver_names[CNT_DEVICES] = {"KB1", "KB2", "Joystick(device)"}; | |||
| const char * driver_names[CNT_DEVICES] = {"KB1", "KB2", "Joystick(device)", "Bluet", "HID1" , "HID2"}; | |||
| //bool driver_active[CNT_DEVICES] = {false, false, false}; | |||
| bool driver_active[CNT_DEVICES] = {false, false, false, false, false}; | |||
| // Lets also look at HID Input devices | |||
| USBHIDInput *hiddrivers[] = {&tablet, &joystick, &mouse, &rawhid2}; | |||
| #define CNT_HIDDEVICES (sizeof(hiddrivers)/sizeof(hiddrivers[0])) | |||
| const char * hid_driver_names[CNT_HIDDEVICES] = {"tablet", "joystick", "mouse", "RawHid2"}; | |||
| bool hid_driver_active[CNT_HIDDEVICES] = {false, false, false, false}; | |||
| BTHIDInput *bthiddrivers[] = {&joystick, &mouse}; | |||
| #define CNT_BTHIDDEVICES (sizeof(bthiddrivers)/sizeof(bthiddrivers[0])) | |||
| const char * bthid_driver_names[CNT_HIDDEVICES] = {"joystick", "mouse"}; | |||
| bool bthid_driver_active[CNT_HIDDEVICES] = {false, false}; | |||
| //============================================================================= | |||
| // Other state variables. | |||
| //============================================================================= | |||
| // Save away values for buttons, x, y, wheel, wheelh | |||
| int buttons_cur = 0; | |||
| int x_cur = 0, | |||
| y_cur = 0, | |||
| z_cur = 0; | |||
| int x2_cur = 0, | |||
| y2_cur = 0, | |||
| z2_cur = 0, | |||
| L1_cur = 0, | |||
| R1_cur = 0; | |||
| int wheel_cur = 0; | |||
| int wheelH_cur = 0; | |||
| int axis_cur[10]; | |||
| String p = "KB1"; | |||
| bool BT = 0; | |||
| int user_axis[64]; | |||
| uint32_t buttons_prev = 0; | |||
| uint32_t buttons; | |||
| bool show_changed_only = false; | |||
| bool new_device_detected = false; | |||
| int16_t y_position_after_device_info = 0; | |||
| uint8_t joystick_left_trigger_value = 0; | |||
| uint8_t joystick_right_trigger_value = 0; | |||
| uint64_t joystick_full_notify_mask = (uint64_t) - 1; | |||
| //============================================================================= | |||
| // Setup | |||
| //============================================================================= | |||
| void setup() | |||
| { | |||
| Serial1.begin(2000000); | |||
| while (!Serial && millis() < 3000) ; // wait for Arduino Serial Monitor | |||
| Serial.println("\n\nUSB Host Testing"); | |||
| myusb.begin(); | |||
| rawhid2.attachReceive(OnReceiveHidData); | |||
| keyboard1.attachPress(OnPress); | |||
| keyboard2.attachPress(OnPress); | |||
| keyboard1.attachExtrasPress(OnHIDExtrasPress); | |||
| keyboard1.attachExtrasRelease(OnHIDExtrasRelease); | |||
| keyboard2.attachExtrasPress(OnHIDExtrasPress); | |||
| keyboard2.attachExtrasRelease(OnHIDExtrasRelease); | |||
| // The below forceBootProtocol will force which ever | |||
| // next keyboard that attaches to this device to be in boot protocol | |||
| // Only try this if you run into keyboard with issues. If this is a combined | |||
| // device like wireless mouse and keyboard this can cause mouse problems. | |||
| //keyboard1.forceBootProtocol(); | |||
| tft.begin(); | |||
| // explicitly set the frame buffer | |||
| tft.setFrameBuffer(frame_buffer); | |||
| delay(100); | |||
| tft.setRotation(3); // 180 | |||
| delay(100); | |||
| tft.fillScreen(ILI9341_BLACK); | |||
| tft.setTextColor(ILI9341_YELLOW); | |||
| tft.setTextSize(2); | |||
| tft.println("Waiting for Device..."); | |||
| tft.useFrameBuffer(true); | |||
| } | |||
| //============================================================================= | |||
| // Loop | |||
| //============================================================================= | |||
| void loop() | |||
| { | |||
| myusb.Task(); | |||
| // Update the display with | |||
| UpdateActiveDeviceInfo(); | |||
| // Now lets try displaying Tablet data | |||
| ProcessTabletData(); | |||
| // And joystick data | |||
| ProcessJoystickData(); | |||
| // Process Mouse Data | |||
| ProcessMouseData(); | |||
| } | |||
| //============================================================================= | |||
| // UpdateActiveDeviceInfo | |||
| //============================================================================= | |||
| //============================================================================= | |||
| // UpdateActiveDeviceInfo | |||
| //============================================================================= | |||
| void UpdateActiveDeviceInfo() { | |||
| // First see if any high level devices | |||
| for (uint8_t i = 0; i < CNT_DEVICES; i++) { | |||
| if (*drivers[i] != driver_active[i]) { | |||
| if (driver_active[i]) { | |||
| Serial.printf("*** Device %s - disconnected ***\n", driver_names[i]); | |||
| driver_active[i] = false; | |||
| } else { | |||
| new_device_detected = true; | |||
| Serial.printf("*** Device %s %x:%x - connected ***\n", driver_names[i], drivers[i]->idVendor(), drivers[i]->idProduct()); | |||
| driver_active[i] = true; | |||
| tft.fillScreen(ILI9341_BLACK); // clear the screen. | |||
| tft.setCursor(0, 0); | |||
| tft.setTextColor(ILI9341_YELLOW); | |||
| tft.setFont(Arial_12); | |||
| tft.printf("Device %s %x:%x\n", driver_names[i], drivers[i]->idVendor(), drivers[i]->idProduct()); | |||
| const uint8_t *psz = drivers[i]->manufacturer(); | |||
| if (psz && *psz) tft.printf(" manufacturer: %s\n", psz); | |||
| psz = drivers[i]->product(); | |||
| if (psz && *psz) tft.printf(" product: %s\n", psz); | |||
| psz = drivers[i]->serialNumber(); | |||
| if (psz && *psz) tft.printf(" Serial: %s\n", psz); | |||
| tft.updateScreen(); // update the screen now | |||
| } | |||
| } | |||
| } | |||
| // Then Hid Devices | |||
| for (uint8_t i = 0; i < CNT_HIDDEVICES; i++) { | |||
| if (*hiddrivers[i] != hid_driver_active[i]) { | |||
| if (hid_driver_active[i]) { | |||
| Serial.printf("*** HID Device %s - disconnected ***\n", hid_driver_names[i]); | |||
| hid_driver_active[i] = false; | |||
| } else { | |||
| new_device_detected = true; | |||
| Serial.printf("*** HID Device %s %x:%x - connected ***\n", hid_driver_names[i], hiddrivers[i]->idVendor(), hiddrivers[i]->idProduct()); | |||
| hid_driver_active[i] = true; | |||
| tft.fillScreen(ILI9341_BLACK); // clear the screen. | |||
| tft.setCursor(0, 0); | |||
| tft.setTextColor(ILI9341_YELLOW); | |||
| tft.setFont(Arial_12); | |||
| tft.printf("HID Device %s %x:%x\n", hid_driver_names[i], hiddrivers[i]->idVendor(), hiddrivers[i]->idProduct()); | |||
| const uint8_t *psz = hiddrivers[i]->manufacturer(); | |||
| if (psz && *psz) tft.printf(" manufacturer: %s\n", psz); | |||
| psz = hiddrivers[i]->product(); | |||
| if (psz && *psz) tft.printf(" product: %s\n", psz); | |||
| psz = hiddrivers[i]->serialNumber(); | |||
| if (psz && *psz) tft.printf(" Serial: %s\n", psz); | |||
| tft.updateScreen(); // update the screen now | |||
| } | |||
| } | |||
| } | |||
| // Then Bluetooth devices | |||
| for (uint8_t i = 0; i < CNT_BTHIDDEVICES; i++) { | |||
| if (*bthiddrivers[i] != bthid_driver_active[i]) { | |||
| if (bthid_driver_active[i]) { | |||
| Serial.printf("*** BTHID Device %s - disconnected ***\n", hid_driver_names[i]); | |||
| bthid_driver_active[i] = false; | |||
| } else { | |||
| new_device_detected = true; | |||
| Serial.printf("*** BTHID Device %s %x:%x - connected ***\n", hid_driver_names[i], hiddrivers[i]->idVendor(), hiddrivers[i]->idProduct()); | |||
| bthid_driver_active[i] = true; | |||
| tft.fillScreen(ILI9341_BLACK); // clear the screen. | |||
| tft.setCursor(0, 0); | |||
| tft.setTextColor(ILI9341_YELLOW); | |||
| tft.setFont(Arial_12); | |||
| tft.printf("Bluetooth Device %s %x:%x\n", bthid_driver_names[i], bthiddrivers[i]->idVendor(), bthiddrivers[i]->idProduct()); | |||
| const uint8_t *psz = bthiddrivers[i]->manufacturer(); | |||
| if (psz && *psz) tft.printf(" manufacturer: %s\n", psz); | |||
| psz = bthiddrivers[i]->product(); | |||
| if (psz && *psz) tft.printf(" product: %s\n", psz); | |||
| psz = bthiddrivers[i]->serialNumber(); | |||
| if (psz && *psz) tft.printf(" Serial: %s\n", psz); | |||
| tft.updateScreen(); // update the screen now | |||
| } | |||
| } | |||
| } | |||
| } | |||
| //============================================================================= | |||
| // ProcessTabletData | |||
| //============================================================================= | |||
| void ProcessTabletData() { | |||
| if (tablet.available()) { | |||
| if (new_device_detected) { | |||
| // Lets display the titles. | |||
| int16_t x; | |||
| tft.getCursor(&x, &y_position_after_device_info); | |||
| tft.setTextColor(ILI9341_YELLOW); | |||
| tft.printf("Buttons:\nX:\nY:\nWheel:\nWheel H:\nAxis:"); | |||
| new_device_detected = false; | |||
| } | |||
| bool something_changed = false; | |||
| if (tablet.getButtons() != buttons_cur) { | |||
| buttons_cur = tablet.getButtons(); | |||
| something_changed = true; | |||
| } | |||
| if (tablet.getMouseX() != x_cur) { | |||
| x_cur = tablet.getMouseX(); | |||
| something_changed = true; | |||
| } | |||
| if (tablet.getMouseY() != y_cur) { | |||
| y_cur = tablet.getMouseY(); | |||
| something_changed = true; | |||
| } | |||
| if (tablet.getWheel() != wheel_cur) { | |||
| wheel_cur = tablet.getWheel(); | |||
| something_changed = true; | |||
| } | |||
| if (tablet.getWheelH() != wheelH_cur) { | |||
| wheelH_cur = tablet.getWheelH(); | |||
| something_changed = true; | |||
| } | |||
| // BUGBUG:: play with some Axis... | |||
| for (uint8_t i = 0; i < 10; i++) { | |||
| int axis = tablet.getAxis(i); | |||
| if (axis != axis_cur[i]) { | |||
| axis_cur[i] = axis; | |||
| something_changed = true; | |||
| } | |||
| } | |||
| if (something_changed) { | |||
| #define TABLET_DATA_X 100 | |||
| int16_t x, y2; | |||
| unsigned char line_space = Arial_12.line_space; | |||
| tft.setTextColor(ILI9341_WHITE, ILI9341_BLACK); | |||
| //tft.setTextDatum(BR_DATUM); | |||
| int16_t y = y_position_after_device_info; | |||
| tft.setCursor(TABLET_DATA_X, y); | |||
| tft.printf("%d(%x)", buttons_cur, buttons_cur); | |||
| tft.getCursor(&x, &y2); | |||
| tft.fillRect(x, y, 320, line_space, ILI9341_BLACK); | |||
| y += line_space; OutputNumberField(TABLET_DATA_X, y, x_cur, 320); | |||
| y += line_space; OutputNumberField(TABLET_DATA_X, y, y_cur, 320); | |||
| y += line_space; OutputNumberField(TABLET_DATA_X, y, wheel_cur, 320); | |||
| y += line_space; OutputNumberField(TABLET_DATA_X, y, wheelH_cur, 320); | |||
| // Output other Axis data | |||
| for (uint8_t i = 0; i < 9; i += 3) { | |||
| y += line_space; | |||
| OutputNumberField(TABLET_DATA_X, y, axis_cur[i], 75); | |||
| OutputNumberField(TABLET_DATA_X + 75, y, axis_cur[i + 1], 75); | |||
| OutputNumberField(TABLET_DATA_X + 150, y, axis_cur[i + 2], 75); | |||
| } | |||
| tft.updateScreen(); // update the screen now | |||
| } | |||
| tablet.digitizerDataClear(); | |||
| } | |||
| } | |||
| //============================================================================= | |||
| // OutputNumberField | |||
| //============================================================================= | |||
| void OutputNumberField(int16_t x, int16_t y, int val, int16_t field_width) { | |||
| int16_t x2, y2; | |||
| tft.setCursor(x, y); | |||
| tft.print(val, DEC); tft.getCursor(&x2, &y2); | |||
| tft.fillRect(x2, y, field_width - (x2 - x), Arial_12.line_space, ILI9341_BLACK); | |||
| } | |||
| //============================================================================= | |||
| // ProcessMouseData | |||
| //============================================================================= | |||
| void ProcessMouseData() { | |||
| if (mouse.available()) { | |||
| if (new_device_detected) { | |||
| // Lets display the titles. | |||
| int16_t x; | |||
| tft.getCursor(&x, &y_position_after_device_info); | |||
| tft.setTextColor(ILI9341_YELLOW); | |||
| tft.printf("Buttons:\nX:\nY:\nWheel:\nWheel H:"); | |||
| new_device_detected = false; | |||
| } | |||
| bool something_changed = false; | |||
| if (mouse.getButtons() != buttons_cur) { | |||
| buttons_cur = mouse.getButtons(); | |||
| something_changed = true; | |||
| } | |||
| if (mouse.getMouseX() != x_cur) { | |||
| x_cur = mouse.getMouseX(); | |||
| something_changed = true; | |||
| } | |||
| if (mouse.getMouseY() != y_cur) { | |||
| y_cur = mouse.getMouseY(); | |||
| something_changed = true; | |||
| } | |||
| if (mouse.getWheel() != wheel_cur) { | |||
| wheel_cur = mouse.getWheel(); | |||
| something_changed = true; | |||
| } | |||
| if (mouse.getWheelH() != wheelH_cur) { | |||
| wheelH_cur = mouse.getWheelH(); | |||
| something_changed = true; | |||
| } | |||
| if (something_changed) { | |||
| #define MOUSE_DATA_X 100 | |||
| int16_t x, y2; | |||
| unsigned char line_space = Arial_12.line_space; | |||
| tft.setTextColor(ILI9341_WHITE, ILI9341_BLACK); | |||
| //tft.setTextDatum(BR_DATUM); | |||
| int16_t y = y_position_after_device_info; | |||
| tft.setCursor(TABLET_DATA_X, y); | |||
| tft.printf("%d(%x)", buttons_cur, buttons_cur); | |||
| tft.getCursor(&x, &y2); | |||
| tft.fillRect(x, y, 320, line_space, ILI9341_BLACK); | |||
| y += line_space; OutputNumberField(MOUSE_DATA_X, y, x_cur, 320); | |||
| y += line_space; OutputNumberField(MOUSE_DATA_X, y, y_cur, 320); | |||
| y += line_space; OutputNumberField(MOUSE_DATA_X, y, wheel_cur, 320); | |||
| y += line_space; OutputNumberField(MOUSE_DATA_X, y, wheelH_cur, 320); | |||
| tft.updateScreen(); // update the screen now | |||
| } | |||
| mouse.mouseDataClear(); | |||
| } | |||
| } | |||
| //============================================================================= | |||
| // ProcessJoystickData | |||
| //============================================================================= | |||
| void ProcessJoystickData() { | |||
| if (joystick.available()) { | |||
| uint64_t axis_mask = joystick.axisMask(); | |||
| uint64_t axis_changed_mask = joystick.axisChangedMask(); | |||
| Serial.print("Joystick: buttons = "); | |||
| buttons = joystick.getButtons(); | |||
| Serial.print(buttons, HEX); | |||
| //Serial.printf(" AMasks: %x %x:%x", axis_mask, (uint32_t)(user_axis_mask >> 32), (uint32_t)(user_axis_mask & 0xffffffff)); | |||
| //Serial.printf(" M: %lx %lx", axis_mask, joystick.axisChangedMask()); | |||
| if (show_changed_only) { | |||
| for (uint8_t i = 0; axis_changed_mask != 0; i++, axis_changed_mask >>= 1) { | |||
| if (axis_changed_mask & 1) { | |||
| Serial.printf(" %d:%d", i, joystick.getAxis(i)); | |||
| } | |||
| } | |||
| } else { | |||
| for (uint8_t i = 0; axis_mask != 0; i++, axis_mask >>= 1) { | |||
| if (axis_mask & 1) { | |||
| Serial.printf(" %d:%d", i, joystick.getAxis(i)); | |||
| } | |||
| } | |||
| } | |||
| for (uint8_t i = 0; i < 64; i++) { | |||
| user_axis[i] = joystick.getAxis(i); | |||
| } | |||
| uint8_t ltv; | |||
| uint8_t rtv; | |||
| switch (joystick.joystickType()) { | |||
| default: | |||
| break; | |||
| case JoystickController::PS4: | |||
| ltv = joystick.getAxis(3); | |||
| rtv = joystick.getAxis(4); | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| joystick.setRumble(ltv, rtv); | |||
| } | |||
| break; | |||
| case JoystickController::PS3: | |||
| ltv = joystick.getAxis(18); | |||
| rtv = joystick.getAxis(19); | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| joystick.setRumble(ltv, rtv, 50); | |||
| } | |||
| break; | |||
| case JoystickController::XBOXONE: | |||
| case JoystickController::XBOX360: | |||
| ltv = joystick.getAxis(4); | |||
| rtv = joystick.getAxis(5); | |||
| if ((ltv != joystick_left_trigger_value) || (rtv != joystick_right_trigger_value)) { | |||
| joystick_left_trigger_value = ltv; | |||
| joystick_right_trigger_value = rtv; | |||
| joystick.setRumble(ltv, rtv); | |||
| Serial.printf(" Set Rumble %d %d", ltv, rtv); | |||
| } | |||
| break; | |||
| } | |||
| if (buttons != buttons_cur) { | |||
| if (joystick.joystickType() == JoystickController::PS3) { | |||
| joystick.setLEDs((buttons >> 12) & 0xf); // try to get to TRI/CIR/X/SQuare | |||
| } else { | |||
| uint8_t lr = (buttons & 1) ? 0xff : 0; | |||
| uint8_t lg = (buttons & 2) ? 0xff : 0; | |||
| uint8_t lb = (buttons & 4) ? 0xff : 0; | |||
| joystick.setLEDs(lr, lg, lb); | |||
| } | |||
| buttons_cur = buttons; | |||
| } | |||
| Serial.println(); | |||
| tft_JoystickData(); | |||
| joystick.joystickDataClear(); | |||
| } | |||
| } | |||
| //============================================================================= | |||
| // TFT_joystick | |||
| //============================================================================= | |||
| void tft_JoystickData() { | |||
| if (new_device_detected) { | |||
| // Lets display the titles. | |||
| int16_t x; | |||
| tft.getCursor(&x, &y_position_after_device_info); | |||
| tft.setTextColor(ILI9341_YELLOW); | |||
| tft.printf("Buttons:\nX:\nY:\nX2\nY2(Z):\nL1:\nR1:\nHAT:"); | |||
| new_device_detected = false; | |||
| } | |||
| bool something_changed = false; | |||
| if (buttons != buttons_prev) { //buttons | |||
| something_changed = true; | |||
| } | |||
| if (user_axis[0] != x_cur) { //xL | |||
| x_cur = user_axis[0]; | |||
| something_changed = true; | |||
| } | |||
| if (user_axis[1] != y_cur) { //yL | |||
| y_cur = user_axis[1]; | |||
| something_changed = true; | |||
| } | |||
| if (user_axis[9] != wheel_cur) { //Hat | |||
| wheel_cur = user_axis[9]; | |||
| something_changed = true; | |||
| } | |||
| //Second Axis | |||
| if (user_axis[2] != x2_cur) { //xR | |||
| x2_cur = user_axis[2]; | |||
| something_changed = true; | |||
| } | |||
| if (user_axis[5] != y2_cur) { //yR or z-axis | |||
| y2_cur = user_axis[5]; | |||
| something_changed = true; | |||
| } | |||
| //Rumble Axis | |||
| switch (joystick.joystickType()) { | |||
| case JoystickController::XBOXONE: | |||
| case JoystickController::XBOX360: | |||
| case JoystickController::PS4: | |||
| if (user_axis[3] != L1_cur) { //xR | |||
| L1_cur = user_axis[3]; | |||
| something_changed = true; | |||
| } | |||
| if (user_axis[4] != R1_cur) { //yR or z-axis | |||
| R1_cur = user_axis[4]; | |||
| something_changed = true; | |||
| } | |||
| break; | |||
| case JoystickController::PS3: | |||
| if (user_axis[18] != L1_cur) { //xR | |||
| L1_cur = user_axis[18]; | |||
| something_changed = true; | |||
| } | |||
| if (user_axis[19] != R1_cur) { //yR or z-axis | |||
| R1_cur = user_axis[19]; | |||
| something_changed = true; | |||
| } | |||
| break; | |||
| } | |||
| if (something_changed) { | |||
| #define MOUSE_DATA_X 100 | |||
| int16_t x, y2; | |||
| unsigned char line_space = Arial_12.line_space; | |||
| tft.setTextColor(ILI9341_WHITE, ILI9341_BLACK); | |||
| //tft.setTextDatum(BR_DATUM); | |||
| int16_t y = y_position_after_device_info; | |||
| tft.setCursor(TABLET_DATA_X, y); | |||
| tft.printf("%d(%x)", buttons, buttons); | |||
| tft.getCursor(&x, &y2); | |||
| tft.fillRect(x, y, 320, line_space, ILI9341_BLACK); | |||
| y += line_space; OutputNumberField(MOUSE_DATA_X, y, x_cur, 320); //x | |||
| y += line_space; OutputNumberField(MOUSE_DATA_X, y, y_cur, 320); //y | |||
| y += line_space; OutputNumberField(MOUSE_DATA_X, y, x2_cur, 320); //x2(z) | |||
| y += line_space; OutputNumberField(MOUSE_DATA_X, y, y2_cur, 320); //y2 | |||
| switch (joystick.joystickType()) { | |||
| case JoystickController::PS4: | |||
| case JoystickController::PS3: | |||
| case JoystickController::XBOXONE: | |||
| case JoystickController::XBOX360: | |||
| y += line_space; OutputNumberField(MOUSE_DATA_X, y, L1_cur, 320); | |||
| y += line_space; OutputNumberField(MOUSE_DATA_X, y, R1_cur, 320); | |||
| break; | |||
| default: | |||
| y += line_space; OutputNumberField(MOUSE_DATA_X, y, 0, 320); | |||
| y += line_space; OutputNumberField(MOUSE_DATA_X, y, 0, 320); | |||
| y += line_space; OutputNumberField(MOUSE_DATA_X, y, wheel_cur, 320); //hat | |||
| break; | |||
| } | |||
| tft.updateScreen(); // update the screen now | |||
| } | |||
| } | |||
| //============================================================================= | |||
| // ProcessMouseData | |||
| //============================================================================= | |||
| bool OnReceiveHidData(uint32_t usage, const uint8_t *data, uint32_t len) { | |||
| // Called for maybe both HIDS for rawhid basic test. One is for the Teensy | |||
| // to output to Serial. while still having Raw Hid... | |||
| if (usage == 0xFF000080 | |||
| ) { | |||
| //Serial.print("RawHIDx data: "); | |||
| //Serial.println(usage, HEX); | |||
| for (uint32_t j = 0; j < len; j++) { | |||
| user_axis[j] = data[j]; | |||
| } | |||
| bool something_changed = false; | |||
| if (user_axis[3] != buttons_cur) { | |||
| buttons_cur = user_axis[3]; | |||
| something_changed = true; | |||
| } | |||
| if (user_axis[4] != x_cur) { | |||
| x_cur = user_axis[4]; | |||
| something_changed = true; | |||
| } | |||
| if (user_axis[5] != y_cur) { | |||
| y_cur = user_axis[5]; | |||
| something_changed = true; | |||
| } | |||
| if (tablet.getWheel() != wheel_cur) { | |||
| wheel_cur = 0; | |||
| something_changed = true; | |||
| } | |||
| if (tablet.getWheelH() != wheelH_cur) { | |||
| wheelH_cur = 0; | |||
| something_changed = true; | |||
| } | |||
| if (something_changed) { | |||
| tft.fillRect(45, 197, 240, 20, ILI9341_RED); | |||
| tft.drawNumber(buttons_cur, 50, 200); | |||
| tft.drawNumber(x_cur, 100, 200); | |||
| tft.drawNumber(y_cur, 150, 200); | |||
| tft.drawNumber(wheel_cur, 200, 200); | |||
| tft.drawNumber(wheelH_cur, 250, 200); | |||
| tft.updateScreen(); // update the screen now | |||
| } | |||
| } else { | |||
| // Lets trim off trailing null characters. | |||
| while ((len > 0) && (data[len - 1] == 0)) { | |||
| len--; | |||
| } | |||
| if (len) { | |||
| //Serial.print("RawHid Serial: "); | |||
| //Serial.write(data, len); | |||
| } | |||
| } | |||
| return true; | |||
| } | |||
| void MaybeSetupTextScrollArea() | |||
| { | |||
| if (new_device_detected) { | |||
| BT = 0; | |||
| new_device_detected = false; | |||
| } | |||
| if (BT == 0) { | |||
| tft.enableScroll(); | |||
| tft.setScrollTextArea(20, 70, 280, 140); | |||
| tft.setScrollBackgroundColor(ILI9341_GREEN); | |||
| tft.setFont(Arial_11); | |||
| tft.setTextColor(ILI9341_BLACK); | |||
| tft.setCursor(20, 70); | |||
| BT = 1; | |||
| } | |||
| } | |||
| void OnPress(int key) | |||
| { | |||
| MaybeSetupTextScrollArea(); | |||
| tft.print("key: "); | |||
| switch (key) { | |||
| case KEYD_UP : tft.print("UP"); break; | |||
| case KEYD_DOWN : tft.print("DN"); break; | |||
| case KEYD_LEFT : tft.print("LEFT"); break; | |||
| case KEYD_RIGHT : tft.print("RIGHT"); break; | |||
| case KEYD_INSERT : tft.print("Ins"); break; | |||
| case KEYD_DELETE : tft.print("Del"); break; | |||
| case KEYD_PAGE_UP : tft.print("PUP"); break; | |||
| case KEYD_PAGE_DOWN: tft.print("PDN"); break; | |||
| case KEYD_HOME : tft.print("HOME"); break; | |||
| case KEYD_END : tft.print("END"); break; | |||
| case KEYD_F1 : tft.print("F1"); break; | |||
| case KEYD_F2 : tft.print("F2"); break; | |||
| case KEYD_F3 : tft.print("F3"); break; | |||
| case KEYD_F4 : tft.print("F4"); break; | |||
| case KEYD_F5 : tft.print("F5"); break; | |||
| case KEYD_F6 : tft.print("F6"); break; | |||
| case KEYD_F7 : tft.print("F7"); break; | |||
| case KEYD_F8 : tft.print("F8"); break; | |||
| case KEYD_F9 : tft.print("F9"); break; | |||
| case KEYD_F10 : tft.print("F10"); break; | |||
| case KEYD_F11 : tft.print("F11"); break; | |||
| case KEYD_F12 : tft.print("F12"); break; | |||
| default: tft.print((char)key); break; | |||
| } | |||
| tft.print("' "); | |||
| tft.print(key); | |||
| tft.print(" MOD: "); | |||
| if (keyboard1) { | |||
| tft.print(keyboard1.getModifiers(), HEX); | |||
| tft.print(" OEM: "); | |||
| tft.print(keyboard1.getOemKey(), HEX); | |||
| tft.print(" LEDS: "); | |||
| tft.println(keyboard1.LEDS(), HEX); | |||
| } else { | |||
| tft.print(keyboard2.getModifiers(), HEX); | |||
| tft.print(" OEM: "); | |||
| tft.print(keyboard2.getOemKey(), HEX); | |||
| tft.print(" LEDS: "); | |||
| tft.println(keyboard2.LEDS(), HEX); | |||
| } | |||
| //Serial.print("key "); | |||
| //Serial.print((char)keyboard1.getKey()); | |||
| //Serial.print(" "); | |||
| //Serial.print((char)keyboard2.getKey()); | |||
| //Serial.println(); | |||
| tft.updateScreen(); // update the screen now | |||
| } | |||
| void OnHIDExtrasPress(uint32_t top, uint16_t key) | |||
| { | |||
| MaybeSetupTextScrollArea(); | |||
| tft.print("HID ("); | |||
| tft.print(top, HEX); | |||
| tft.print(") key press:"); | |||
| tft.print(key, HEX); | |||
| if (top == 0xc0000) { | |||
| switch (key) { | |||
| case 0x20 : tft.print(" - +10"); break; | |||
| case 0x21 : tft.print(" - +100"); break; | |||
| case 0x22 : tft.print(" - AM/PM"); break; | |||
| case 0x30 : tft.print(" - Power"); break; | |||
| case 0x31 : tft.print(" - Reset"); break; | |||
| case 0x32 : tft.print(" - Sleep"); break; | |||
| case 0x33 : tft.print(" - Sleep After"); break; | |||
| case 0x34 : tft.print(" - Sleep Mode"); break; | |||
| case 0x35 : tft.print(" - Illumination"); break; | |||
| case 0x36 : tft.print(" - Function Buttons"); break; | |||
| case 0x40 : tft.print(" - Menu"); break; | |||
| case 0x41 : tft.print(" - Menu Pick"); break; | |||
| case 0x42 : tft.print(" - Menu Up"); break; | |||
| case 0x43 : tft.print(" - Menu Down"); break; | |||
| case 0x44 : tft.print(" - Menu Left"); break; | |||
| case 0x45 : tft.print(" - Menu Right"); break; | |||
| case 0x46 : tft.print(" - Menu Escape"); break; | |||
| case 0x47 : tft.print(" - Menu Value Increase"); break; | |||
| case 0x48 : tft.print(" - Menu Value Decrease"); break; | |||
| case 0x60 : tft.print(" - Data On Screen"); break; | |||
| case 0x61 : tft.print(" - Closed Caption"); break; | |||
| case 0x62 : tft.print(" - Closed Caption Select"); break; | |||
| case 0x63 : tft.print(" - VCR/TV"); break; | |||
| case 0x64 : tft.print(" - Broadcast Mode"); break; | |||
| case 0x65 : tft.print(" - Snapshot"); break; | |||
| case 0x66 : tft.print(" - Still"); break; | |||
| case 0x80 : tft.print(" - Selection"); break; | |||
| case 0x81 : tft.print(" - Assign Selection"); break; | |||
| case 0x82 : tft.print(" - Mode Step"); break; | |||
| case 0x83 : tft.print(" - Recall Last"); break; | |||
| case 0x84 : tft.print(" - Enter Channel"); break; | |||
| case 0x85 : tft.print(" - Order Movie"); break; | |||
| case 0x86 : tft.print(" - Channel"); break; | |||
| case 0x87 : tft.print(" - Media Selection"); break; | |||
| case 0x88 : tft.print(" - Media Select Computer"); break; | |||
| case 0x89 : tft.print(" - Media Select TV"); break; | |||
| case 0x8A : tft.print(" - Media Select WWW"); break; | |||
| case 0x8B : tft.print(" - Media Select DVD"); break; | |||
| case 0x8C : tft.print(" - Media Select Telephone"); break; | |||
| case 0x8D : tft.print(" - Media Select Program Guide"); break; | |||
| case 0x8E : tft.print(" - Media Select Video Phone"); break; | |||
| case 0x8F : tft.print(" - Media Select Games"); break; | |||
| case 0x90 : tft.print(" - Media Select Messages"); break; | |||
| case 0x91 : tft.print(" - Media Select CD"); break; | |||
| case 0x92 : tft.print(" - Media Select VCR"); break; | |||
| case 0x93 : tft.print(" - Media Select Tuner"); break; | |||
| case 0x94 : tft.print(" - Quit"); break; | |||
| case 0x95 : tft.print(" - Help"); break; | |||
| case 0x96 : tft.print(" - Media Select Tape"); break; | |||
| case 0x97 : tft.print(" - Media Select Cable"); break; | |||
| case 0x98 : tft.print(" - Media Select Satellite"); break; | |||
| case 0x99 : tft.print(" - Media Select Security"); break; | |||
| case 0x9A : tft.print(" - Media Select Home"); break; | |||
| case 0x9B : tft.print(" - Media Select Call"); break; | |||
| case 0x9C : tft.print(" - Channel Increment"); break; | |||
| case 0x9D : tft.print(" - Channel Decrement"); break; | |||
| case 0x9E : tft.print(" - Media Select SAP"); break; | |||
| case 0xA0 : tft.print(" - VCR Plus"); break; | |||
| case 0xA1 : tft.print(" - Once"); break; | |||
| case 0xA2 : tft.print(" - Daily"); break; | |||
| case 0xA3 : tft.print(" - Weekly"); break; | |||
| case 0xA4 : tft.print(" - Monthly"); break; | |||
| case 0xB0 : tft.print(" - Play"); break; | |||
| case 0xB1 : tft.print(" - Pause"); break; | |||
| case 0xB2 : tft.print(" - Record"); break; | |||
| case 0xB3 : tft.print(" - Fast Forward"); break; | |||
| case 0xB4 : tft.print(" - Rewind"); break; | |||
| case 0xB5 : tft.print(" - Scan Next Track"); break; | |||
| case 0xB6 : tft.print(" - Scan Previous Track"); break; | |||
| case 0xB7 : tft.print(" - Stop"); break; | |||
| case 0xB8 : tft.print(" - Eject"); break; | |||
| case 0xB9 : tft.print(" - Random Play"); break; | |||
| case 0xBA : tft.print(" - Select DisC"); break; | |||
| case 0xBB : tft.print(" - Enter Disc"); break; | |||
| case 0xBC : tft.print(" - Repeat"); break; | |||
| case 0xBD : tft.print(" - Tracking"); break; | |||
| case 0xBE : tft.print(" - Track Normal"); break; | |||
| case 0xBF : tft.print(" - Slow Tracking"); break; | |||
| case 0xC0 : tft.print(" - Frame Forward"); break; | |||
| case 0xC1 : tft.print(" - Frame Back"); break; | |||
| case 0xC2 : tft.print(" - Mark"); break; | |||
| case 0xC3 : tft.print(" - Clear Mark"); break; | |||
| case 0xC4 : tft.print(" - Repeat From Mark"); break; | |||
| case 0xC5 : tft.print(" - Return To Mark"); break; | |||
| case 0xC6 : tft.print(" - Search Mark Forward"); break; | |||
| case 0xC7 : tft.print(" - Search Mark Backwards"); break; | |||
| case 0xC8 : tft.print(" - Counter Reset"); break; | |||
| case 0xC9 : tft.print(" - Show Counter"); break; | |||
| case 0xCA : tft.print(" - Tracking Increment"); break; | |||
| case 0xCB : tft.print(" - Tracking Decrement"); break; | |||
| case 0xCD : tft.print(" - Pause/Continue"); break; | |||
| case 0xE0 : tft.print(" - Volume"); break; | |||
| case 0xE1 : tft.print(" - Balance"); break; | |||
| case 0xE2 : tft.print(" - Mute"); break; | |||
| case 0xE3 : tft.print(" - Bass"); break; | |||
| case 0xE4 : tft.print(" - Treble"); break; | |||
| case 0xE5 : tft.print(" - Bass Boost"); break; | |||
| case 0xE6 : tft.print(" - Surround Mode"); break; | |||
| case 0xE7 : tft.print(" - Loudness"); break; | |||
| case 0xE8 : tft.print(" - MPX"); break; | |||
| case 0xE9 : tft.print(" - Volume Up"); break; | |||
| case 0xEA : tft.print(" - Volume Down"); break; | |||
| case 0xF0 : tft.print(" - Speed Select"); break; | |||
| case 0xF1 : tft.print(" - Playback Speed"); break; | |||
| case 0xF2 : tft.print(" - Standard Play"); break; | |||
| case 0xF3 : tft.print(" - Long Play"); break; | |||
| case 0xF4 : tft.print(" - Extended Play"); break; | |||
| case 0xF5 : tft.print(" - Slow"); break; | |||
| case 0x100: tft.print(" - Fan Enable"); break; | |||
| case 0x101: tft.print(" - Fan Speed"); break; | |||
| case 0x102: tft.print(" - Light"); break; | |||
| case 0x103: tft.print(" - Light Illumination Level"); break; | |||
| case 0x104: tft.print(" - Climate Control Enable"); break; | |||
| case 0x105: tft.print(" - Room Temperature"); break; | |||
| case 0x106: tft.print(" - Security Enable"); break; | |||
| case 0x107: tft.print(" - Fire Alarm"); break; | |||
| case 0x108: tft.print(" - Police Alarm"); break; | |||
| case 0x150: tft.print(" - Balance Right"); break; | |||
| case 0x151: tft.print(" - Balance Left"); break; | |||
| case 0x152: tft.print(" - Bass Increment"); break; | |||
| case 0x153: tft.print(" - Bass Decrement"); break; | |||
| case 0x154: tft.print(" - Treble Increment"); break; | |||
| case 0x155: tft.print(" - Treble Decrement"); break; | |||
| case 0x160: tft.print(" - Speaker System"); break; | |||
| case 0x161: tft.print(" - Channel Left"); break; | |||
| case 0x162: tft.print(" - Channel Right"); break; | |||
| case 0x163: tft.print(" - Channel Center"); break; | |||
| case 0x164: tft.print(" - Channel Front"); break; | |||
| case 0x165: tft.print(" - Channel Center Front"); break; | |||
| case 0x166: tft.print(" - Channel Side"); break; | |||
| case 0x167: tft.print(" - Channel Surround"); break; | |||
| case 0x168: tft.print(" - Channel Low Frequency Enhancement"); break; | |||
| case 0x169: tft.print(" - Channel Top"); break; | |||
| case 0x16A: tft.print(" - Channel Unknown"); break; | |||
| case 0x170: tft.print(" - Sub-channel"); break; | |||
| case 0x171: tft.print(" - Sub-channel Increment"); break; | |||
| case 0x172: tft.print(" - Sub-channel Decrement"); break; | |||
| case 0x173: tft.print(" - Alternate Audio Increment"); break; | |||
| case 0x174: tft.print(" - Alternate Audio Decrement"); break; | |||
| case 0x180: tft.print(" - Application Launch Buttons"); break; | |||
| case 0x181: tft.print(" - AL Launch Button Configuration Tool"); break; | |||
| case 0x182: tft.print(" - AL Programmable Button Configuration"); break; | |||
| case 0x183: tft.print(" - AL Consumer Control Configuration"); break; | |||
| case 0x184: tft.print(" - AL Word Processor"); break; | |||
| case 0x185: tft.print(" - AL Text Editor"); break; | |||
| case 0x186: tft.print(" - AL Spreadsheet"); break; | |||
| case 0x187: tft.print(" - AL Graphics Editor"); break; | |||
| case 0x188: tft.print(" - AL Presentation App"); break; | |||
| case 0x189: tft.print(" - AL Database App"); break; | |||
| case 0x18A: tft.print(" - AL Email Reader"); break; | |||
| case 0x18B: tft.print(" - AL Newsreader"); break; | |||
| case 0x18C: tft.print(" - AL Voicemail"); break; | |||
| case 0x18D: tft.print(" - AL Contacts/Address Book"); break; | |||
| case 0x18E: tft.print(" - AL Calendar/Schedule"); break; | |||
| case 0x18F: tft.print(" - AL Task/Project Manager"); break; | |||
| case 0x190: tft.print(" - AL Log/Journal/Timecard"); break; | |||
| case 0x191: tft.print(" - AL Checkbook/Finance"); break; | |||
| case 0x192: tft.print(" - AL Calculator"); break; | |||
| case 0x193: tft.print(" - AL A/V Capture/Playback"); break; | |||
| case 0x194: tft.print(" - AL Local Machine Browser"); break; | |||
| case 0x195: tft.print(" - AL LAN/WAN Browser"); break; | |||
| case 0x196: tft.print(" - AL Internet Browser"); break; | |||
| case 0x197: tft.print(" - AL Remote Networking/ISP Connect"); break; | |||
| case 0x198: tft.print(" - AL Network Conference"); break; | |||
| case 0x199: tft.print(" - AL Network Chat"); break; | |||
| case 0x19A: tft.print(" - AL Telephony/Dialer"); break; | |||
| case 0x19B: tft.print(" - AL Logon"); break; | |||
| case 0x19C: tft.print(" - AL Logoff"); break; | |||
| case 0x19D: tft.print(" - AL Logon/Logoff"); break; | |||
| case 0x19E: tft.print(" - AL Terminal Lock/Screensaver"); break; | |||
| case 0x19F: tft.print(" - AL Control Panel"); break; | |||
| case 0x1A0: tft.print(" - AL Command Line Processor/Run"); break; | |||
| case 0x1A1: tft.print(" - AL Process/Task Manager"); break; | |||
| case 0x1A2: tft.print(" - AL Select Tast/Application"); break; | |||
| case 0x1A3: tft.print(" - AL Next Task/Application"); break; | |||
| case 0x1A4: tft.print(" - AL Previous Task/Application"); break; | |||
| case 0x1A5: tft.print(" - AL Preemptive Halt Task/Application"); break; | |||
| case 0x200: tft.print(" - Generic GUI Application Controls"); break; | |||
| case 0x201: tft.print(" - AC New"); break; | |||
| case 0x202: tft.print(" - AC Open"); break; | |||
| case 0x203: tft.print(" - AC Close"); break; | |||
| case 0x204: tft.print(" - AC Exit"); break; | |||
| case 0x205: tft.print(" - AC Maximize"); break; | |||
| case 0x206: tft.print(" - AC Minimize"); break; | |||
| case 0x207: tft.print(" - AC Save"); break; | |||
| case 0x208: tft.print(" - AC Print"); break; | |||
| case 0x209: tft.print(" - AC Properties"); break; | |||
| case 0x21A: tft.print(" - AC Undo"); break; | |||
| case 0x21B: tft.print(" - AC Copy"); break; | |||
| case 0x21C: tft.print(" - AC Cut"); break; | |||
| case 0x21D: tft.print(" - AC Paste"); break; | |||
| case 0x21E: tft.print(" - AC Select All"); break; | |||
| case 0x21F: tft.print(" - AC Find"); break; | |||
| case 0x220: tft.print(" - AC Find and Replace"); break; | |||
| case 0x221: tft.print(" - AC Search"); break; | |||
| case 0x222: tft.print(" - AC Go To"); break; | |||
| case 0x223: tft.print(" - AC Home"); break; | |||
| case 0x224: tft.print(" - AC Back"); break; | |||
| case 0x225: tft.print(" - AC Forward"); break; | |||
| case 0x226: tft.print(" - AC Stop"); break; | |||
| case 0x227: tft.print(" - AC Refresh"); break; | |||
| case 0x228: tft.print(" - AC Previous Link"); break; | |||
| case 0x229: tft.print(" - AC Next Link"); break; | |||
| case 0x22A: tft.print(" - AC Bookmarks"); break; | |||
| case 0x22B: tft.print(" - AC History"); break; | |||
| case 0x22C: tft.print(" - AC Subscriptions"); break; | |||
| case 0x22D: tft.print(" - AC Zoom In"); break; | |||
| case 0x22E: tft.print(" - AC Zoom Out"); break; | |||
| case 0x22F: tft.print(" - AC Zoom"); break; | |||
| case 0x230: tft.print(" - AC Full Screen View"); break; | |||
| case 0x231: tft.print(" - AC Normal View"); break; | |||
| case 0x232: tft.print(" - AC View Toggle"); break; | |||
| case 0x233: tft.print(" - AC Scroll Up"); break; | |||
| case 0x234: tft.print(" - AC Scroll Down"); break; | |||
| case 0x235: tft.print(" - AC Scroll"); break; | |||
| case 0x236: tft.print(" - AC Pan Left"); break; | |||
| case 0x237: tft.print(" - AC Pan Right"); break; | |||
| case 0x238: tft.print(" - AC Pan"); break; | |||
| case 0x239: tft.print(" - AC New Window"); break; | |||
| case 0x23A: tft.print(" - AC Tile Horizontally"); break; | |||
| case 0x23B: tft.print(" - AC Tile Vertically"); break; | |||
| case 0x23C: tft.print(" - AC Format"); break; | |||
| } | |||
| } | |||
| tft.println(); | |||
| tft.updateScreen(); // update the screen now | |||
| } | |||
| void OnHIDExtrasRelease(uint32_t top, uint16_t key) | |||
| { | |||
| tft.print("HID ("); | |||
| tft.print(top, HEX); | |||
| tft.print(") key release:"); | |||
| tft.println(key, HEX); | |||
| } | |||
+ 1
- 0
examples/USBHost_viewer/defs.h
Переглянути файл
| @@ -0,0 +1 @@ | |||
+ 7
- 5
hid.cpp
Переглянути файл
| @@ -165,7 +165,8 @@ void USBHIDParser::control(const Transfer_t *transfer) | |||
| println(" got report descriptor"); | |||
| parse(); | |||
| queue_Data_Transfer(in_pipe, report, in_size, this); | |||
| if (device->idVendor == 0x054C && device->idProduct == 0x0268) { | |||
| if (device->idVendor == 0x054C && | |||
| ((device->idProduct == 0x0268) || (device->idProduct == 0x042F)/* || (device->idProduct == 0x03D5)*/)) { | |||
| println("send special PS3 feature command"); | |||
| mk_setup(setup, 0x21, 9, 0x03F4, 0, 4); // ps3 tell to send report 1? | |||
| static uint8_t ps3_feature_F4_report[] = {0x42, 0x0c, 0x00, 0x00}; | |||
| @@ -205,12 +206,12 @@ void USBHIDParser::disconnect() | |||
| // Called when the HID device sends a report | |||
| void USBHIDParser::in_data(const Transfer_t *transfer) | |||
| { | |||
| /*Serial.printf("HID: "); | |||
| /*USBHDBGSerial.printf("HID: "); | |||
| uint8_t *pb = (uint8_t*)transfer->buffer; | |||
| for (uint8_t i = 0; i < transfer->length; i++) { | |||
| Serial.printf("%x ",pb[i]); | |||
| USBHDBGSerial.printf("%x ",pb[i]); | |||
| } | |||
| Serial.printf("\n"); */ | |||
| USBHDBGSerial.printf("\n"); */ | |||
| print("HID: "); | |||
| print(use_report_id); | |||
| @@ -402,6 +403,7 @@ USBHIDInput * USBHIDParser::find_driver(uint32_t topusage) | |||
| } | |||
| driver = driver->next; | |||
| } | |||
| println("No Driver claimed topusage: ", topusage, HEX); | |||
| return NULL; | |||
| } | |||
| @@ -587,7 +589,7 @@ void USBHIDParser::parse(uint16_t type_and_report_id, const uint8_t *data, uint3 | |||
| } | |||
| uminmax = true; | |||
| } | |||
| //Serial.printf("TU:%x US:%x %x %d %d: C:%d, %d, MM:%d, %x %x\n", topusage, usage_page, val, logical_min, logical_max, | |||
| //USBHDBGSerial.printf("TU:%x US:%x %x %d %d: C:%d, %d, MM:%d, %x %x\n", topusage, usage_page, val, logical_min, logical_max, | |||
| // report_count, usage_count, uminmax, usage[0], usage[1]); | |||
| for (uint32_t i=0; i < report_count; i++) { | |||
| uint32_t u; | |||
+ 475
- 46
joystick.cpp
Переглянути файл
| @@ -27,6 +27,13 @@ | |||
| #define print USBHost::print_ | |||
| #define println USBHost::println_ | |||
| //#define DEBUG_JOYSTICK | |||
| #ifdef DEBUG_JOYSTICK | |||
| #define DBGPrintf USBHDBGSerial.printf | |||
| #else | |||
| #define DBGPrintf(...) | |||
| #endif | |||
| // PID/VID to joystick mapping - Only the XBOXOne is used to claim the USB interface directly, | |||
| // The others are used after claim-hid code to know which one we have and to use it for | |||
| // doing other features. | |||
| @@ -34,7 +41,11 @@ JoystickController::product_vendor_mapping_t JoystickController::pid_vid_mapping | |||
| { 0x045e, 0x02ea, XBOXONE, false },{ 0x045e, 0x02dd, XBOXONE, false }, | |||
| { 0x045e, 0x0719, XBOX360, false}, | |||
| { 0x054C, 0x0268, PS3, true}, | |||
| { 0x054C, 0x05C4, PS4, true}, {0x054C, 0x09CC, PS4, true } | |||
| { 0x054C, 0x042F, PS3, true}, // PS3 Navigation controller | |||
| { 0x054C, 0x03D5, PS3_MOTION, true}, // PS3 Motion controller | |||
| { 0x054C, 0x05C4, PS4, true}, {0x054C, 0x09CC, PS4, true }, | |||
| { 0x046D, 0xC626, SpaceNav, true}, // 3d Connextion Space Navigator, 0x10008 | |||
| { 0x046D, 0xC628, SpaceNav, true} // 3d Connextion Space Navigator, 0x10008 | |||
| }; | |||
| @@ -47,6 +58,7 @@ void JoystickController::init() | |||
| contribute_String_Buffers(mystring_bufs, sizeof(mystring_bufs)/sizeof(strbuf_t)); | |||
| driver_ready_for_device(this); | |||
| USBHIDParser::driver_ready_for_hid_collection(this); | |||
| BluetoothController::driver_ready_for_bluetooth(this); | |||
| } | |||
| //----------------------------------------------------------------------------- | |||
| @@ -83,6 +95,7 @@ uint16_t JoystickController::idProduct() | |||
| const uint8_t *JoystickController::manufacturer() | |||
| { | |||
| if ((device != nullptr) && (device->strbuf != nullptr)) return &device->strbuf->buffer[device->strbuf->iStrings[strbuf_t::STR_ID_MAN]]; | |||
| //if ((btdevice != nullptr) && (btdevice->strbuf != nullptr)) return &btdevice->strbuf->buffer[btdevice->strbuf->iStrings[strbuf_t::STR_ID_MAN]]; | |||
| if ((mydevice != nullptr) && (mydevice->strbuf != nullptr)) return &mydevice->strbuf->buffer[mydevice->strbuf->iStrings[strbuf_t::STR_ID_MAN]]; | |||
| return nullptr; | |||
| } | |||
| @@ -91,6 +104,7 @@ const uint8_t *JoystickController::product() | |||
| { | |||
| if ((device != nullptr) && (device->strbuf != nullptr)) return &device->strbuf->buffer[device->strbuf->iStrings[strbuf_t::STR_ID_PROD]]; | |||
| if ((mydevice != nullptr) && (mydevice->strbuf != nullptr)) return &mydevice->strbuf->buffer[mydevice->strbuf->iStrings[strbuf_t::STR_ID_PROD]]; | |||
| if (btdevice != nullptr) return remote_name_; | |||
| return nullptr; | |||
| } | |||
| @@ -110,11 +124,13 @@ bool JoystickController::setRumble(uint8_t lValue, uint8_t rValue, uint8_t timeo | |||
| rumble_rValue_ = rValue; | |||
| rumble_timeout_ = timeout; | |||
| switch (joystickType) { | |||
| switch (joystickType_) { | |||
| default: | |||
| break; | |||
| case PS3: | |||
| return transmitPS3UserFeedbackMsg(); | |||
| case PS3_MOTION: | |||
| return transmitPS3MotionUserFeedbackMsg(); | |||
| case PS4: | |||
| return transmitPS4UserFeedbackMsg(); | |||
| case XBOXONE: | |||
| @@ -157,6 +173,7 @@ bool JoystickController::setRumble(uint8_t lValue, uint8_t rValue, uint8_t timeo | |||
| return false; | |||
| } | |||
| bool JoystickController::setLEDs(uint8_t lr, uint8_t lg, uint8_t lb) | |||
| { | |||
| // Need to know which joystick we are on. Start off with XBox support - maybe need to add some enum value for the known | |||
| @@ -166,9 +183,11 @@ bool JoystickController::setLEDs(uint8_t lr, uint8_t lg, uint8_t lb) | |||
| leds_[1] = lg; | |||
| leds_[2] = lb; | |||
| switch (joystickType) { | |||
| switch (joystickType_) { | |||
| case PS3: | |||
| return transmitPS3UserFeedbackMsg(); | |||
| case PS3_MOTION: | |||
| return transmitPS3MotionUserFeedbackMsg(); | |||
| case PS4: | |||
| return transmitPS4UserFeedbackMsg(); | |||
| case XBOX360: | |||
| @@ -200,21 +219,44 @@ bool JoystickController::setLEDs(uint8_t lr, uint8_t lg, uint8_t lb) | |||
| } | |||
| bool JoystickController::transmitPS4UserFeedbackMsg() { | |||
| if (!driver_) return false; | |||
| uint8_t packet[32]; | |||
| memset(packet, 0, sizeof(packet)); | |||
| packet[0] = 0x05; // Report ID | |||
| packet[1]= 0xFF; | |||
| packet[4] = rumble_lValue_; // Small Rumble | |||
| packet[5] = rumble_rValue_; // Big rumble | |||
| packet[6] = leds_[0]; // RGB value | |||
| packet[7] = leds_[1]; | |||
| packet[8] = leds_[2]; | |||
| // 9, 10 flash ON, OFF times in 100ths of sedond? 2.5 seconds = 255 | |||
| Serial.printf("Joystick update Rumble/LEDs"); | |||
| return driver_->sendPacket(packet, 32); | |||
| if (driver_) { | |||
| uint8_t packet[32]; | |||
| memset(packet, 0, sizeof(packet)); | |||
| packet[0] = 0x05; // Report ID | |||
| packet[1]= 0xFF; | |||
| packet[4] = rumble_lValue_; // Small Rumble | |||
| packet[5] = rumble_rValue_; // Big rumble | |||
| packet[6] = leds_[0]; // RGB value | |||
| packet[7] = leds_[1]; | |||
| packet[8] = leds_[2]; | |||
| // 9, 10 flash ON, OFF times in 100ths of second? 2.5 seconds = 255 | |||
| DBGPrintf("Joystick update Rumble/LEDs\n"); | |||
| return driver_->sendPacket(packet, 32); | |||
| } else if (btdriver_) { | |||
| uint8_t packet[79]; | |||
| memset(packet, 0, sizeof(packet)); | |||
| //0xa2, 0x11, 0xc0, 0x20, 0xf0, 0x04, 0x00 | |||
| packet[0] = 0x52; | |||
| packet[1] = 0x11; // Report ID | |||
| packet[2] = 0x80; | |||
| //packet[3] = 0x20; | |||
| packet[4] = 0xFF; | |||
| packet[7] = rumble_lValue_; // Small Rumble | |||
| packet[8] = rumble_rValue_; // Big rumble | |||
| packet[9] = leds_[0]; // RGB value | |||
| packet[10] = leds_[1]; | |||
| packet[11] = leds_[2]; | |||
| // 12, 13 flash ON, OFF times in 100ths of sedond? 2.5 seconds = 255 | |||
| DBGPrintf("Joystick update Rumble/LEDs\n"); | |||
| btdriver_->sendL2CapCommand(packet, sizeof(packet), 0x40); | |||
| return true; | |||
| } | |||
| return false; | |||
| } | |||
| static const uint8_t PS3_USER_FEEDBACK_INIT[] = { | |||
| @@ -230,16 +272,58 @@ static const uint8_t PS3_USER_FEEDBACK_INIT[] = { | |||
| 0x00, 0x00, 0x00 }; | |||
| bool JoystickController::transmitPS3UserFeedbackMsg() { | |||
| if (!driver_) return false; | |||
| memcpy(txbuf_, PS3_USER_FEEDBACK_INIT, 48); | |||
| if (driver_) { | |||
| memcpy(txbuf_, PS3_USER_FEEDBACK_INIT, 48); | |||
| txbuf_[1] = rumble_lValue_? rumble_timeout_ : 0; | |||
| txbuf_[2] = rumble_lValue_; // Small Rumble | |||
| txbuf_[3] = rumble_rValue_? rumble_timeout_ : 0; | |||
| txbuf_[4] = rumble_rValue_; // Big rumble | |||
| txbuf_[9] = leds_[2] << 1; // RGB value // using third led now... | |||
| //DBGPrintf("\nJoystick update Rumble/LEDs %d %d %d %d %d\n", txbuf_[1], txbuf_[2], txbuf_[3], txbuf_[4], txbuf_[9]); | |||
| return driver_->sendControlPacket(0x21, 9, 0x201, 0, 48, txbuf_); | |||
| } else if (btdriver_) { | |||
| txbuf_[0] = 0x52; | |||
| txbuf_[1] = 0x1; | |||
| memcpy(&txbuf_[2], PS3_USER_FEEDBACK_INIT, 48); | |||
| txbuf_[3] = rumble_lValue_? rumble_timeout_ : 0; | |||
| txbuf_[4] = rumble_lValue_; // Small Rumble | |||
| txbuf_[5] = rumble_rValue_? rumble_timeout_ : 0; | |||
| txbuf_[6] = rumble_rValue_; // Big rumble | |||
| txbuf_[11] = leds_[2] << 1; // RGB value | |||
| DBGPrintf("\nJoystick update Rumble/LEDs %d %d %d %d %d\n", txbuf_[3], txbuf_[4], txbuf_[5], txbuf_[6], txbuf_[11]); | |||
| btdriver_->sendL2CapCommand(txbuf_, 50, BluetoothController::CONTROL_SCID); | |||
| return true; | |||
| } | |||
| return false; | |||
| } | |||
| txbuf_[1] = rumble_lValue_? rumble_timeout_ : 0; | |||
| txbuf_[2] = rumble_lValue_; // Small Rumble | |||
| txbuf_[3] = rumble_rValue_? rumble_timeout_ : 0; | |||
| txbuf_[4] = rumble_rValue_; // Big rumble | |||
| txbuf_[9] = leds_[0] << 1; // RGB value | |||
| //Serial.printf("\nJoystick update Rumble/LEDs %d %d %d %d %d\n", txbuf_[1], txbuf_[2], txbuf_[3], txbuf_[4], txbuf_[9]); | |||
| return driver_->sendControlPacket(0x21, 9, 0x201, 0, 48, txbuf_); | |||
| #define MOVE_REPORT_BUFFER_SIZE 7 | |||
| #define MOVE_HID_BUFFERSIZE 50 // Size of the buffer for the Playstation Motion Controller | |||
| bool JoystickController::transmitPS3MotionUserFeedbackMsg() { | |||
| if (driver_) { | |||
| txbuf_[0] = 0x02; // Set report ID, this is needed for Move commands to work | |||
| txbuf_[2] = leds_[0]; | |||
| txbuf_[3] = leds_[1]; | |||
| txbuf_[4] = leds_[2]; | |||
| txbuf_[6] = rumble_lValue_; // Set the rumble value into the write buffer | |||
| //return driver_->sendControlPacket(0x21, 9, 0x201, 0, MOVE_REPORT_BUFFER_SIZE, txbuf_); | |||
| return driver_->sendPacket(txbuf_, MOVE_REPORT_BUFFER_SIZE); | |||
| } else if (btdriver_) { | |||
| txbuf_[0] = 0xA2; // HID BT DATA_request (0xA0) | Report Type (Output 0x02) | |||
| txbuf_[1] = 0x02; // Report ID | |||
| txbuf_[3] = leds_[0]; | |||
| txbuf_[4] = leds_[1]; | |||
| txbuf_[5] = leds_[2]; | |||
| txbuf_[7] = rumble_lValue_; | |||
| btdriver_->sendL2CapCommand(txbuf_, MOVE_HID_BUFFERSIZE, BluetoothController::INTERRUPT_SCID); | |||
| return true; | |||
| } | |||
| return false; | |||
| } | |||
| //***************************************************************************** | |||
| @@ -249,7 +333,7 @@ if (!driver_) return false; | |||
| hidclaim_t JoystickController::claim_collection(USBHIDParser *driver, Device_t *dev, uint32_t topusage) | |||
| { | |||
| // only claim Desktop/Joystick and Desktop/Gamepad | |||
| if (topusage != 0x10004 && topusage != 0x10005) return CLAIM_NO; | |||
| if (topusage != 0x10004 && topusage != 0x10005 && topusage != 0x10008) return CLAIM_NO; | |||
| // only claim from one physical device | |||
| if (mydevice != NULL && dev != mydevice) return CLAIM_NO; | |||
| @@ -264,9 +348,11 @@ hidclaim_t JoystickController::claim_collection(USBHIDParser *driver, Device_t * | |||
| connected_ = true; // remember that hardware is actually connected... | |||
| // Lets see if we know what type of joystick this is. That is, is it a PS3 or PS4 or ... | |||
| joystickType = mapVIDPIDtoJoystickType(mydevice->idVendor, mydevice->idProduct, false); | |||
| switch (joystickType) { | |||
| joystickType_ = mapVIDPIDtoJoystickType(mydevice->idVendor, mydevice->idProduct, false); | |||
| DBGPrintf("JoystickController::claim_collection joystickType_=%d\n", joystickType_); | |||
| switch (joystickType_) { | |||
| case PS3: | |||
| case PS3_MOTION: // not sure yet | |||
| additional_axis_usage_page_ = 0x1; | |||
| additional_axis_usage_start_ = 0x100; | |||
| additional_axis_usage_count_ = 39; | |||
| @@ -279,12 +365,12 @@ hidclaim_t JoystickController::claim_collection(USBHIDParser *driver, Device_t * | |||
| axis_change_notify_mask_ = (uint64_t)0xfffffffffffff3ffl; // Start off assume all bits - 10 and 11 | |||
| break; | |||
| default: | |||
| additional_axis_usage_page_ = 0; | |||
| additional_axis_usage_start_ = 0; | |||
| additional_axis_usage_count_ = 0; | |||
| additional_axis_usage_page_ = 0x09; | |||
| additional_axis_usage_start_ = 0x21; | |||
| additional_axis_usage_count_ = 5; | |||
| axis_change_notify_mask_ = 0x3ff; // Start off assume only the 10 bits... | |||
| } | |||
| Serial.printf("Claim Additional axis: %x %x %d\n", additional_axis_usage_page_, additional_axis_usage_start_, additional_axis_usage_count_); | |||
| DBGPrintf("Claim Additional axis: %x %x %d\n", additional_axis_usage_page_, additional_axis_usage_start_, additional_axis_usage_count_); | |||
| return CLAIM_REPORT; | |||
| } | |||
| @@ -305,7 +391,8 @@ void JoystickController::hid_input_begin(uint32_t topusage, uint32_t type, int l | |||
| void JoystickController::hid_input_data(uint32_t usage, int32_t value) | |||
| { | |||
| //Serial.printf("Joystick: usage=%X, value=%d\n", usage, value); | |||
| DBGPrintf("joystickType_=%d\n", joystickType_); | |||
| DBGPrintf("Joystick: usage=%X, value=%d\n", usage, value); | |||
| uint32_t usage_page = usage >> 16; | |||
| usage &= 0xFFFF; | |||
| if (usage_page == 9 && usage >= 1 && usage <= 32) { | |||
| @@ -334,7 +421,7 @@ void JoystickController::hid_input_data(uint32_t usage, int32_t value) | |||
| } | |||
| } else if (usage_page == additional_axis_usage_page_) { | |||
| // see if the usage is witin range. | |||
| //Serial.printf("UP: usage_page=%x usage=%x User: %x %d\n", usage_page, usage, user_buttons_usage_start, user_buttons_count_); | |||
| //DBGPrintf("UP: usage_page=%x usage=%x User: %x %d\n", usage_page, usage, user_buttons_usage_start, user_buttons_count_); | |||
| if ((usage >= additional_axis_usage_start_) && (usage < (additional_axis_usage_start_ + additional_axis_usage_count_))) { | |||
| // We are in the user range. | |||
| uint16_t usage_index = usage - additional_axis_usage_start_ + STANDARD_AXIS_COUNT; | |||
| @@ -348,11 +435,11 @@ void JoystickController::hid_input_data(uint32_t usage, int32_t value) | |||
| } | |||
| axis_mask_ |= ((uint64_t)1 << usage_index); // Keep record of which axis we have data on. | |||
| } | |||
| //Serial.printf("UB: index=%x value=%x\n", usage_index, value); | |||
| //DBGPrintf("UB: index=%x value=%x\n", usage_index, value); | |||
| } | |||
| } else { | |||
| Serial.printf("UP: usage_page=%x usage=%x add: %x %x %d\n", usage_page, usage, additional_axis_usage_page_, additional_axis_usage_start_, additional_axis_usage_count_); | |||
| DBGPrintf("UP: usage_page=%x usage=%x add: %x %x %d\n", usage_page, usage, additional_axis_usage_page_, additional_axis_usage_start_, additional_axis_usage_count_); | |||
| } | |||
| // TODO: hat switch? | |||
| @@ -367,7 +454,7 @@ void JoystickController::hid_input_end() | |||
| bool JoystickController::hid_process_out_data(const Transfer_t *transfer) | |||
| { | |||
| //Serial.printf("JoystickController::hid_process_out_data\n"); | |||
| //DBGPrintf("JoystickController::hid_process_out_data\n"); | |||
| return true; | |||
| } | |||
| @@ -479,7 +566,8 @@ bool JoystickController::claim(Device_t *dev, int type, const uint8_t *descripto | |||
| connected_ = 0; // remember that hardware is actually connected... | |||
| } | |||
| memset(axis, 0, sizeof(axis)); // clear out any data. | |||
| joystickType = jtype; // remember we are an XBox One. | |||
| joystickType_ = jtype; // remember we are an XBox One. | |||
| DBGPrintf(" JoystickController::claim joystickType_ %d\n", joystickType_); | |||
| return true; | |||
| } | |||
| @@ -512,6 +600,8 @@ void JoystickController::tx_callback(const Transfer_t *transfer) | |||
| // Information came from several places on the web including: | |||
| // https://github.com/quantus/xbox-one-controller-protocol | |||
| /************************************************************/ | |||
| // 20 00 C5 0E 00 00 00 00 00 00 F0 06 AD FB 7A 0A DD F7 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |||
| // 20 00 E0 0E 40 00 00 00 00 00 F0 06 AD FB 7A 0A DD F7 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |||
| typedef struct { | |||
| uint8_t type; | |||
| uint8_t const_0; | |||
| @@ -545,14 +635,15 @@ typedef struct { | |||
| int16_t axis[4]; | |||
| } xbox360data_t; | |||
| static const uint8_t xbox_axis_order_mapping[] = {4, 5, 0, 1, 2, 3}; | |||
| static const uint8_t xbox_axis_order_mapping[] = {3, 4, 0, 1, 2, 5}; | |||
| void JoystickController::rx_data(const Transfer_t *transfer) | |||
| { | |||
| print("JoystickController::rx_data: "); | |||
| print("JoystickController::rx_data (", joystickType_, DEC); | |||
| print("): "); | |||
| print_hexbytes((uint8_t*)transfer->buffer, transfer->length); | |||
| if (joystickType == XBOXONE) { | |||
| if (joystickType_ == XBOXONE) { | |||
| // Process XBOX One data | |||
| axis_mask_ = 0x3f; | |||
| axis_changed_mask_ = 0; // assume none for now | |||
| @@ -562,6 +653,8 @@ void JoystickController::rx_data(const Transfer_t *transfer) | |||
| if (xb1d->buttons != buttons) { | |||
| buttons = xb1d->buttons; | |||
| anychange = true; | |||
| joystickEvent = true; | |||
| println(" Button Change: ", buttons, HEX); | |||
| } | |||
| for (uint8_t i = 0; i < sizeof (xbox_axis_order_mapping); i++) { | |||
| // The first two values were unsigned. | |||
| @@ -575,7 +668,7 @@ void JoystickController::rx_data(const Transfer_t *transfer) | |||
| joystickEvent = true; | |||
| } | |||
| } else if (joystickType == XBOX360) { | |||
| } else if (joystickType_ == XBOX360) { | |||
| // First byte appears to status - if the byte is 0x8 it is a connect or disconnect of the controller. | |||
| xbox360data_t *xb360d = (xbox360data_t *)transfer->buffer; | |||
| if (xb360d->state == 0x08) { | |||
| @@ -595,8 +688,8 @@ void JoystickController::rx_data(const Transfer_t *transfer) | |||
| println("XBox360w - controllerStatus: ", xb360d->controller_status, HEX); | |||
| } else if(xb360d->id_or_type == 0x01) { // Lets only process report 1. | |||
| //const uint8_t *pbuffer = (uint8_t*)transfer->buffer; | |||
| //for (uint8_t i = 0; i < transfer->length; i++) Serial.printf("%02x ", pbuffer[i]); | |||
| //Serial.printf("\n"); | |||
| //for (uint8_t i = 0; i < transfer->length; i++) DBGPrintf("%02x ", pbuffer[i]); | |||
| //DBGPrintf("\n"); | |||
| if (buttons != xb360d->buttons) { | |||
| buttons = xb360d->buttons; | |||
| @@ -643,4 +736,340 @@ void JoystickController::disconnect() | |||
| // TODO: free resources | |||
| } | |||
| bool JoystickController::claim_bluetooth(BluetoothController *driver, uint32_t bluetooth_class, uint8_t *remoteName) | |||
| { | |||
| if ((((bluetooth_class & 0xff00) == 0x2500) || (((bluetooth_class & 0xff00) == 0x500))) && ((bluetooth_class & 0x3C) == 0x08)) { | |||
| DBGPrintf("JoystickController::claim_bluetooth TRUE\n"); | |||
| btdriver_ = driver; | |||
| btdevice = (Device_t*)driver; // remember this way | |||
| if (remoteName) mapNameToJoystickType(remoteName); | |||
| return true; | |||
| } | |||
| if (remoteName && mapNameToJoystickType(remoteName)) { | |||
| if ((joystickType_ == PS3) || (joystickType_ == PS3_MOTION)) { | |||
| DBGPrintf("JoystickController::claim_bluetooth TRUE PS3 hack...\n"); | |||
| btdriver_ = driver; | |||
| btdevice = (Device_t*)driver; // remember this way | |||
| special_process_required = SP_PS3_IDS; // PS3 maybe needs different IDS. | |||
| return true; | |||
| } | |||
| } | |||
| return false; | |||
| } | |||
| bool JoystickController::process_bluetooth_HID_data(const uint8_t *data, uint16_t length) | |||
| { | |||
| // Example data from PS4 controller | |||
| //01 7e 7f 82 84 08 00 00 00 00 | |||
| // LX LY RX RY BT BT PS LT RT | |||
| DBGPrintf("JoystickController::process_bluetooth_HID_data: data[0]=%x\n", data[0]); | |||
| // May have to look at this one with other controllers... | |||
| if (data[0] == 1) { | |||
| //print(" Joystick Data: "); | |||
| // print_hexbytes(data, length); | |||
| if (length > TOTAL_AXIS_COUNT) length = TOTAL_AXIS_COUNT; // don't overflow arrays... | |||
| DBGPrintf(" Joystick Data: "); | |||
| for(uint16_t i =0; i < length; i++) DBGPrintf("%02x ", data[i]); | |||
| DBGPrintf("\r\n"); | |||
| if (joystickType_ == PS3) { | |||
| // Quick and dirty hack to match PS3 HID data | |||
| uint32_t cur_buttons = data[2] | ((uint16_t)data[3] << 8) | ((uint32_t)data[4] << 16); | |||
| if (cur_buttons != buttons) { | |||
| buttons = cur_buttons; | |||
| joystickEvent = true; // something changed. | |||
| } | |||
| uint64_t mask = 0x1; | |||
| axis_mask_ = 0x27; // assume bits 0, 1, 2, 5 | |||
| for (uint16_t i = 0; i < 3; i++) { | |||
| if (axis[i] != data[i+6]) { | |||
| axis_changed_mask_ |= mask; | |||
| axis[i] = data[i+6]; | |||
| } | |||
| mask <<= 1; // shift down the mask. | |||
| } | |||
| if (axis[5] != data[9]) { | |||
| axis_changed_mask_ |= (1<<5); | |||
| axis[5] = data[9]; | |||
| } | |||
| if (axis[3] != data[18]) { | |||
| axis_changed_mask_ |= (1<<3); | |||
| axis[3] = data[18]; | |||
| } | |||
| if (axis[4] != data[19]) { | |||
| axis_changed_mask_ |= (1<<4); | |||
| axis[4] = data[19]; | |||
| } | |||
| // Then rest of data | |||
| mask = 0x1 << 10; // setup for other bits | |||
| for (uint16_t i = 10; i < length; i++ ) { | |||
| axis_mask_ |= mask; | |||
| if(data[i] != axis[i]) { | |||
| axis_changed_mask_ |= mask; | |||
| axis[i] = data[i]; | |||
| } | |||
| mask <<= 1; // shift down the mask. | |||
| } | |||
| } else if (joystickType_ == PS3_MOTION) { | |||
| // Quick and dirty PS3_Motion data. | |||
| uint32_t cur_buttons = data[1] | ((uint16_t)data[2] << 8) | ((uint32_t)data[3] << 16); | |||
| if (cur_buttons != buttons) { | |||
| buttons = cur_buttons; | |||
| joystickEvent = true; // something changed. | |||
| } | |||
| // Hard to know what is best here. for now just copy raw data over... | |||
| // will do this for now... Format of thought to be data. | |||
| // data[1-3] Buttons (mentioned 4 as well but appears to be counter | |||
| // axis[0-1] data[5] Trigger, Previous trigger value | |||
| // 2-5 Unknown probably place holders for Axis like data for other PS3 | |||
| // 6 - Time stamp | |||
| // 7 - Battery | |||
| // 8-19 - Accel: XL, XH, YL, YH, ZL, ZH, XL2, XH2, YL2, YH2, ZL2, ZH2 | |||
| // 20-31 - Gyro: Xl,Xh,Yl,Yh,Zl,Zh,Xl2,Xh2,Yl2,Yh2,Zl2,Zh2 | |||
| // 32 - Temp High | |||
| // 33 - Temp Low (4 bits) Maybe Magneto x High on other?? | |||
| uint64_t mask = 0x1; | |||
| axis_mask_ = 0; // assume bits 0, 1, 2, 5 | |||
| // Then rest of data | |||
| mask = 0x1 << 10; // setup for other bits | |||
| for (uint16_t i = 5; i < length; i++ ) { | |||
| axis_mask_ |= mask; | |||
| if(data[i] != axis[i-5]) { | |||
| axis_changed_mask_ |= mask; | |||
| axis[i-5] = data[i]; | |||
| } | |||
| mask <<= 1; // shift down the mask. | |||
| } | |||
| } else { | |||
| uint64_t mask = 0x1; | |||
| axis_mask_ = 0; | |||
| for (uint16_t i = 0; i < length; i++ ) { | |||
| axis_mask_ |= mask; | |||
| if(data[i] != axis[i]) { | |||
| axis_changed_mask_ |= mask; | |||
| axis[i] = data[i]; | |||
| } | |||
| mask <<= 1; // shift down the mask. | |||
| // DBGPrintf("%02x ", axis[i]); | |||
| } | |||
| } | |||
| if (axis_changed_mask_ & axis_change_notify_mask_) | |||
| joystickEvent = true; | |||
| connected_ = true; | |||
| return true; | |||
| } else if(data[0] == 0x11){ | |||
| DBGPrintf("\n Joystick Data: "); | |||
| uint64_t mask = 0x1; | |||
| axis_mask_ = 0; | |||
| axis_changed_mask_ = 0; | |||
| //This moves data to be equivalent to what we see for | |||
| //data[0] = 0x01 | |||
| uint8_t tmp_data[length-2]; | |||
| for (uint16_t i = 0; i < (length-2); i++ ) { | |||
| tmp_data[i] = 0; | |||
| tmp_data[i] = data[i+2]; | |||
| } | |||
| /* | |||
| * [1] LX, [2] = LY, [3] = RX, [4] = RY | |||
| * [5] combo, tri, cir, x, sqr, D-PAD (4bits, 0-3 | |||
| * [6] R3,L3, opt, share, R2, L2, R1, L1 | |||
| * [7] Counter (bit7-2), T-PAD, PS | |||
| * [8] Left Trigger, [9] Right Trigger | |||
| * [10-11] Timestamp | |||
| * [12] Battery (0 to 0xff) | |||
| * [13-14] acceleration x | |||
| * [15-16] acceleration y | |||
| * [17-18] acceleration z | |||
| * [19-20] gyro x | |||
| * [21-22] gyro y | |||
| * [23-24] gyro z | |||
| * [25-29] unknown | |||
| * [30] 0x00,phone,mic, usb, battery level (4bits) | |||
| * rest is trackpad? to do implement? | |||
| */ | |||
| //PS Bit | |||
| tmp_data[7] = (tmp_data[7] >> 0) & 1; | |||
| //set arrow buttons to axis[0] | |||
| tmp_data[10] = tmp_data[5] & ((1 << 4) - 1); | |||
| //set buttons for last 4bits in the axis[5] | |||
| tmp_data[5] = tmp_data[5] >> 4; | |||
| // Quick and dirty hack to match PS4 HID data | |||
| uint32_t cur_buttons = tmp_data[7] | (tmp_data[10]) | ((tmp_data[6]*10)) | ((uint16_t)tmp_data[5] << 16) ; | |||
| if (cur_buttons != buttons) { | |||
| buttons = cur_buttons; | |||
| joystickEvent = true; // something changed. | |||
| } | |||
| mask = 0x1; | |||
| axis_mask_ = 0x27; // assume bits 0, 1, 2, 5 | |||
| for (uint16_t i = 0; i < 3; i++) { | |||
| if (axis[i] != tmp_data[i+1]) { | |||
| axis_changed_mask_ |= mask; | |||
| axis[i] = tmp_data[i+1]; | |||
| } | |||
| mask <<= 1; // shift down the mask. | |||
| } | |||
| if (axis[5] != tmp_data[4]) { | |||
| axis_changed_mask_ |= (1<<5); | |||
| axis[5] = tmp_data[4]; | |||
| } | |||
| if (axis[3] != tmp_data[8]) { | |||
| axis_changed_mask_ |= (1<<3); | |||
| axis[3] = tmp_data[8]; | |||
| } | |||
| if (axis[4] != tmp_data[9]) { | |||
| axis_changed_mask_ |= (1<<4); | |||
| axis[4] = tmp_data[9]; | |||
| } | |||
| //limit for masking | |||
| mask = 0x1; | |||
| for (uint16_t i = 6; i < (64); i++ ) { | |||
| axis_mask_ |= mask; | |||
| if(tmp_data[i] != axis[i]) { | |||
| axis_changed_mask_ |= mask; | |||
| axis[i] = tmp_data[i]; | |||
| } | |||
| mask <<= 1; // shift down the mask. | |||
| DBGPrintf("%02x ", axis[i]); | |||
| } | |||
| DBGPrintf("\n"); | |||
| //DBGPrintf("Axis Mask (axis_mask_, axis_changed_mask_; %d, %d\n", axis_mask_,axis_changed_mask_); | |||
| joystickEvent = true; | |||
| connected_ = true; | |||
| } | |||
| return false; | |||
| } | |||
| bool JoystickController::mapNameToJoystickType(const uint8_t *remoteName) | |||
| { | |||
| // Sort of a hack, but try to map the name given from remote to a type... | |||
| if (strncmp((const char *)remoteName, "Wireless Controller", 19) == 0) { | |||
| DBGPrintf(" JoystickController::mapNameToJoystickType %s - set to PS4\n", remoteName); | |||
| joystickType_ = PS4; | |||
| } else if (strncmp((const char *)remoteName, "PLAYSTATION(R)3", 15) == 0) { | |||
| DBGPrintf(" JoystickController::mapNameToJoystickType %x %s - set to PS3\n", (uint32_t)this, remoteName); | |||
| joystickType_ = PS3; | |||
| } else if (strncmp((const char *)remoteName, "Navigation Controller", 21) == 0) { | |||
| DBGPrintf(" JoystickController::mapNameToJoystickType %x %s - set to PS3\n", (uint32_t)this, remoteName); | |||
| joystickType_ = PS3; | |||
| } else if (strncmp((const char *)remoteName, "Motion Controller", 17) == 0) { | |||
| DBGPrintf(" JoystickController::mapNameToJoystickType %x %s - set to PS3 Motion\n", (uint32_t)this, remoteName); | |||
| joystickType_ = PS3_MOTION; | |||
| } else if (strncmp((const char *)remoteName, "Xbox Wireless", 13) == 0) { | |||
| DBGPrintf(" JoystickController::mapNameToJoystickType %x %s - set to XBOXONE\n", (uint32_t)this, remoteName); | |||
| joystickType_ = XBOXONE; | |||
| } else { | |||
| DBGPrintf(" JoystickController::mapNameToJoystickType %s - Unknown\n", remoteName); | |||
| } | |||
| DBGPrintf(" Joystick Type: %d\n", joystickType_); | |||
| return true; | |||
| } | |||
| bool JoystickController::remoteNameComplete(const uint8_t *remoteName) | |||
| { | |||
| // Sort of a hack, but try to map the name given from remote to a type... | |||
| if (mapNameToJoystickType(remoteName)) { | |||
| switch (joystickType_) { | |||
| case PS4: special_process_required = SP_NEED_CONNECT; break; | |||
| case PS3: special_process_required = SP_PS3_IDS; break; | |||
| case PS3_MOTION: special_process_required = SP_PS3_IDS; break; | |||
| default: | |||
| break; | |||
| } | |||
| } | |||
| return true; | |||
| } | |||
| void JoystickController::connectionComplete() | |||
| { | |||
| DBGPrintf(" JoystickController::connectionComplete %x joystick type %d\n", (uint32_t)this, joystickType_); | |||
| switch (joystickType_) { | |||
| case PS4: | |||
| { | |||
| uint8_t packet[2]; | |||
| packet[0] = 0x43; // HID BT Get_report (0x40) | Report Type (Feature 0x03) | |||
| packet[1] = 0x02; // Report ID | |||
| DBGPrintf("Set PS4 report\n"); | |||
| delay(1); | |||
| btdriver_->sendL2CapCommand(packet, sizeof(packet), 0x40); | |||
| } | |||
| break; | |||
| case PS3: | |||
| { | |||
| uint8_t packet[6]; | |||
| packet[0] = 0x53; // HID BT Set_report (0x50) | Report Type (Feature 0x03) | |||
| packet[1] = 0xF4; // Report ID | |||
| packet[2] = 0x42; // Special PS3 Controller enable commands | |||
| packet[3] = 0x03; | |||
| packet[4] = 0x00; | |||
| packet[5] = 0x00; | |||
| DBGPrintf("enable six axis\n"); | |||
| delay(1); | |||
| btdriver_->sendL2CapCommand(packet, sizeof(packet), BluetoothController::CONTROL_SCID); | |||
| } | |||
| break; | |||
| case PS3_MOTION: | |||
| setLEDs(0, 0xff, 0); // Maybe try setting to green? | |||
| default: | |||
| break; | |||
| } | |||
| } | |||
| void JoystickController::release_bluetooth() | |||
| { | |||
| btdevice = nullptr; // remember this way | |||
| btdriver_ = nullptr; | |||
| connected_ = false; | |||
| special_process_required = false; | |||
| } | |||
| bool JoystickController::PS3Pair(uint8_t* bdaddr) { | |||
| if (!driver_) return false; | |||
| if (joystickType_ == PS3) { | |||
| /* Set the internal Bluetooth address */ | |||
| txbuf_[0] = 0x01; | |||
| txbuf_[1] = 0x00; | |||
| for(uint8_t i = 0; i < 6; i++) | |||
| txbuf_[i + 2] = bdaddr[5 - i]; // Copy into buffer, has to be written reversed, so it is MSB first | |||
| // bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0xF5), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data | |||
| return driver_->sendControlPacket(0x21, 9, 0x3f5, 0, 8, txbuf_); | |||
| } else if (joystickType_ == PS3_MOTION) { | |||
| // Slightly different than other PS3 units... | |||
| txbuf_[0] = 0x05; | |||
| for(uint8_t i = 0; i < 6; i++) | |||
| txbuf_[i + 1] = bdaddr[i]; // Order different looks like LSB First? | |||
| txbuf_[7] = 0x10; | |||
| txbuf_[8] = 0x01; | |||
| txbuf_[9] = 0x02; | |||
| txbuf_[10] = 0x12; | |||
| // bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0xF5), Report Type (Feature 0x03), interface (0x00), datalength, datalength, data | |||
| return driver_->sendControlPacket(0x21, 9, 0x305, 0, 11, txbuf_); | |||
| } | |||
| return false; | |||
| } | |||
+ 84
- 7
keyboard.cpp
Переглянути файл
| @@ -102,6 +102,9 @@ static const keyboard_force_boot_protocol_t keyboard_forceBootMode[] = { | |||
| #define print USBHost::print_ | |||
| #define println USBHost::println_ | |||
| void KeyboardController::init() | |||
| { | |||
| contribute_Pipes(mypipes, sizeof(mypipes)/sizeof(Pipe_t)); | |||
| @@ -109,6 +112,7 @@ void KeyboardController::init() | |||
| contribute_String_Buffers(mystring_bufs, sizeof(mystring_bufs)/sizeof(strbuf_t)); | |||
| driver_ready_for_device(this); | |||
| USBHIDParser::driver_ready_for_hid_collection(this); | |||
| BluetoothController::driver_ready_for_bluetooth(this); | |||
| force_boot_protocol = false; // start off assuming not | |||
| } | |||
| @@ -380,8 +384,13 @@ void KeyboardController::LEDS(uint8_t leds) { | |||
| void KeyboardController::updateLEDS() { | |||
| // Now lets tell keyboard new state. | |||
| mk_setup(setup, 0x21, 9, 0x200, 0, sizeof(leds_.byte)); // hopefully this sets leds | |||
| queue_Control_Transfer(device, &setup, &leds_.byte, this); | |||
| if (device != nullptr) { | |||
| // Only do it this way if we are a standard USB device | |||
| mk_setup(setup, 0x21, 9, 0x200, 0, sizeof(leds_.byte)); // hopefully this sets leds | |||
| queue_Control_Transfer(device, &setup, &leds_.byte, this); | |||
| } else { | |||
| // Bluetooth, need to setup back channel to Bluetooth controller. | |||
| } | |||
| } | |||
| //============================================================================= | |||
| @@ -394,12 +403,12 @@ void KeyboardController::updateLEDS() { | |||
| hidclaim_t KeyboardController::claim_collection(USBHIDParser *driver, Device_t *dev, uint32_t topusage) | |||
| { | |||
| // Lets try to claim a few specific Keyboard related collection/reports | |||
| //Serial.printf("KBH Claim %x\n", topusage); | |||
| //USBHDBGSerial.printf("KBH Claim %x\n", topusage); | |||
| if ((topusage != TOPUSAGE_SYS_CONTROL) | |||
| && (topusage != TOPUSAGE_CONSUMER_CONTROL) | |||
| ) return CLAIM_NO; | |||
| // only claim from one physical device | |||
| //Serial.println("KeyboardController claim collection"); | |||
| //USBHDBGSerial.println("KeyboardController claim collection"); | |||
| // Lets only claim if this is the same device as claimed Keyboard... | |||
| if (dev != device) return CLAIM_NO; | |||
| if (mydevice != NULL && dev != mydevice) return CLAIM_NO; | |||
| @@ -417,7 +426,7 @@ void KeyboardController::disconnect_collection(Device_t *dev) | |||
| void KeyboardController::hid_input_begin(uint32_t topusage, uint32_t type, int lgmin, int lgmax) | |||
| { | |||
| //Serial.printf("KPC:hid_input_begin TUSE: %x TYPE: %x Range:%x %x\n", topusage, type, lgmin, lgmax); | |||
| //USBHDBGSerial.printf("KPC:hid_input_begin TUSE: %x TYPE: %x Range:%x %x\n", topusage, type, lgmin, lgmax); | |||
| topusage_ = topusage; // remember which report we are processing. | |||
| hid_input_begin_ = true; | |||
| hid_input_data_ = false; | |||
| @@ -427,7 +436,7 @@ void KeyboardController::hid_input_data(uint32_t usage, int32_t value) | |||
| { | |||
| // Hack ignore 0xff00 high words as these are user values... | |||
| if ((usage & 0xffff0000) == 0xff000000) return; | |||
| //Serial.printf("KeyboardController: topusage= %x usage=%X, value=%d\n", topusage_, usage, value); | |||
| //USBHDBGSerial.printf("KeyboardController: topusage= %x usage=%X, value=%d\n", topusage_, usage, value); | |||
| // See if the value is in our keys_down list | |||
| usage &= 0xffff; // only keep the actual key | |||
| @@ -466,7 +475,7 @@ void KeyboardController::hid_input_data(uint32_t usage, int32_t value) | |||
| void KeyboardController::hid_input_end() | |||
| { | |||
| //Serial.println("KPC:hid_input_end"); | |||
| //USBHDBGSerial.println("KPC:hid_input_end"); | |||
| if (hid_input_begin_) { | |||
| // See if we received any data from parser if not, assume all keys released... | |||
| @@ -484,6 +493,69 @@ void KeyboardController::hid_input_end() | |||
| } | |||
| } | |||
| bool KeyboardController::claim_bluetooth(BluetoothController *driver, uint32_t bluetooth_class, uint8_t *remoteName) | |||
| { | |||
| USBHDBGSerial.printf("Keyboard Controller::claim_bluetooth - Class %x\n", bluetooth_class); | |||
| if ((((bluetooth_class & 0xff00) == 0x2500) || (((bluetooth_class & 0xff00) == 0x500))) && (bluetooth_class & 0x40)) { | |||
| if (remoteName && (strncmp((const char *)remoteName, "PLAYSTATION(R)3", 15) == 0)) { | |||
| USBHDBGSerial.printf("KeyboardController::claim_bluetooth Reject PS3 hack\n"); | |||
| return false; | |||
| } | |||
| USBHDBGSerial.printf("KeyboardController::claim_bluetooth TRUE\n"); | |||
| //btdevice = driver; | |||
| return true; | |||
| } | |||
| return false; | |||
| } | |||
| bool KeyboardController::remoteNameComplete(const uint8_t *remoteName) | |||
| { | |||
| // Real Hack some PS3 controllers bluetoot class is keyboard... | |||
| if (strncmp((const char *)remoteName, "PLAYSTATION(R)3", 15) == 0) { | |||
| USBHDBGSerial.printf(" KeyboardController::remoteNameComplete %s - Oops PS3 unclaim\n", remoteName); | |||
| return false; | |||
| } | |||
| return true; | |||
| } | |||
| bool KeyboardController::process_bluetooth_HID_data(const uint8_t *data, uint16_t length) | |||
| { | |||
| // Example DATA from bluetooth keyboard: | |||
| // 0 1 2 3 4 5 6 7 8 910 1 2 3 4 5 6 7 | |||
| // LEN D | |||
| //BT rx2_data(18): 48 20 e 0 a 0 70 0 a1 1 2 0 0 0 0 0 0 0 | |||
| //BT rx2_data(18): 48 20 e 0 a 0 70 0 a1 1 2 0 4 0 0 0 0 0 | |||
| //BT rx2_data(18): 48 20 e 0 a 0 70 0 a1 1 2 0 0 0 0 0 0 0 | |||
| // So Len=9 passed in data starting at report ID=1... | |||
| USBHDBGSerial.printf("KeyboardController::process_bluetooth_HID_data\n"); | |||
| if (data[0] != 1) return false; | |||
| print(" KB Data: "); | |||
| print_hexbytes(data, length); | |||
| for (int i=2; i < length; i++) { | |||
| uint32_t key = prev_report[i]; | |||
| if (key >= 4 && !contains(key, report)) { | |||
| key_release(prev_report[0], key); | |||
| } | |||
| } | |||
| for (int i=2; i < 8; i++) { | |||
| uint32_t key = data[i]; | |||
| if (key >= 4 && !contains(key, prev_report)) { | |||
| key_press(data[1], key); | |||
| } | |||
| } | |||
| // Save away the data.. But shift down one byte... Don't need the report number | |||
| memcpy(prev_report, &data[1], 8); | |||
| return true; | |||
| } | |||
| void KeyboardController::release_bluetooth() | |||
| { | |||
| //btdevice = nullptr; | |||
| } | |||
| //***************************************************************************** | |||
| // Some simple query functions depend on which interface we are using... | |||
| //***************************************************************************** | |||
| @@ -492,6 +564,7 @@ uint16_t KeyboardController::idVendor() | |||
| { | |||
| if (device != nullptr) return device->idVendor; | |||
| if (mydevice != nullptr) return mydevice->idVendor; | |||
| if (btdevice != nullptr) return btdevice->idVendor; | |||
| return 0; | |||
| } | |||
| @@ -499,12 +572,14 @@ uint16_t KeyboardController::idProduct() | |||
| { | |||
| if (device != nullptr) return device->idProduct; | |||
| if (mydevice != nullptr) return mydevice->idProduct; | |||
| if (btdevice != nullptr) return btdevice->idProduct; | |||
| return 0; | |||
| } | |||
| const uint8_t *KeyboardController::manufacturer() | |||
| { | |||
| if ((device != nullptr) && (device->strbuf != nullptr)) return &device->strbuf->buffer[device->strbuf->iStrings[strbuf_t::STR_ID_MAN]]; | |||
| if ((btdevice != nullptr) && (btdevice->strbuf != nullptr)) return &btdevice->strbuf->buffer[btdevice->strbuf->iStrings[strbuf_t::STR_ID_MAN]]; | |||
| if ((mydevice != nullptr) && (mydevice->strbuf != nullptr)) return &mydevice->strbuf->buffer[mydevice->strbuf->iStrings[strbuf_t::STR_ID_MAN]]; | |||
| return nullptr; | |||
| } | |||
| @@ -513,6 +588,7 @@ const uint8_t *KeyboardController::product() | |||
| { | |||
| if ((device != nullptr) && (device->strbuf != nullptr)) return &device->strbuf->buffer[device->strbuf->iStrings[strbuf_t::STR_ID_PROD]]; | |||
| if ((mydevice != nullptr) && (mydevice->strbuf != nullptr)) return &mydevice->strbuf->buffer[mydevice->strbuf->iStrings[strbuf_t::STR_ID_PROD]]; | |||
| if ((btdevice != nullptr) && (btdevice->strbuf != nullptr)) return &btdevice->strbuf->buffer[btdevice->strbuf->iStrings[strbuf_t::STR_ID_PROD]]; | |||
| return nullptr; | |||
| } | |||
| @@ -520,6 +596,7 @@ const uint8_t *KeyboardController::serialNumber() | |||
| { | |||
| if ((device != nullptr) && (device->strbuf != nullptr)) return &device->strbuf->buffer[device->strbuf->iStrings[strbuf_t::STR_ID_SERIAL]]; | |||
| if ((mydevice != nullptr) && (mydevice->strbuf != nullptr)) return &mydevice->strbuf->buffer[mydevice->strbuf->iStrings[strbuf_t::STR_ID_SERIAL]]; | |||
| if ((btdevice != nullptr) && (btdevice->strbuf != nullptr)) return &btdevice->strbuf->buffer[btdevice->strbuf->iStrings[strbuf_t::STR_ID_SERIAL]]; | |||
| return nullptr; | |||
| } | |||
+ 2
- 0
keywords.txt
Переглянути файл
| @@ -4,6 +4,7 @@ USBHub KEYWORD1 | |||
| USBHIDParser KEYWORD1 | |||
| KeyboardController KEYWORD1 | |||
| MouseController KEYWORD1 | |||
| DigitizerController KEYWORD1 | |||
| MIDIDevice KEYWORD1 | |||
| MIDIDevice_BigBuffer KEYWORD1 | |||
| USBSerial KEYWORD1 | |||
| @@ -90,6 +91,7 @@ setRumbleOn KEYWORD2 | |||
| setLEDs KEYWORD2 | |||
| joystickType KEYWORD2 | |||
| PS3 LITERAL1 | |||
| PS3_MOTION LITERAL1 | |||
| PS4 LITERAL1 | |||
| XBOXONE LITERAL1 | |||
| XBOX360 LITERAL1 | |||
+ 62
- 2
mouse.cpp
Переглянути файл
| @@ -25,11 +25,17 @@ | |||
| #include "USBHost_t36.h" // Read this header first for key info | |||
| void MouseController::init() | |||
| { | |||
| USBHIDParser::driver_ready_for_hid_collection(this); | |||
| BluetoothController::driver_ready_for_bluetooth(this); | |||
| } | |||
| hidclaim_t MouseController::claim_collection(USBHIDParser *driver, Device_t *dev, uint32_t topusage) | |||
| { | |||
| // only claim Desktop/Mouse | |||
| if (topusage != 0x10002) return CLAIM_NO; | |||
| if ((topusage != 0x10002) && (topusage != 0x10001)) return CLAIM_NO; | |||
| // only claim from one physical device | |||
| if (mydevice != NULL && dev != mydevice) return CLAIM_NO; | |||
| mydevice = dev; | |||
| @@ -52,7 +58,7 @@ void MouseController::hid_input_begin(uint32_t topusage, uint32_t type, int lgmi | |||
| void MouseController::hid_input_data(uint32_t usage, int32_t value) | |||
| { | |||
| //Serial.printf("Mouse: usage=%X, value=%d\n", usage, value); | |||
| //USBHDBGSerial.printf("Mouse: usage=%X, value=%d\n", usage, value); | |||
| uint32_t usage_page = usage >> 16; | |||
| usage &= 0xFFFF; | |||
| if (usage_page == 9 && usage >= 1 && usage <= 8) { | |||
| @@ -101,3 +107,57 @@ void MouseController::mouseDataClear() { | |||
| } | |||
| bool MouseController::claim_bluetooth(BluetoothController *driver, uint32_t bluetooth_class, uint8_t *remoteName) | |||
| { | |||
| // How to handle combo devices? | |||
| USBHDBGSerial.printf("MouseController Controller::claim_bluetooth - Class %x\n", bluetooth_class); | |||
| if ((((bluetooth_class & 0xff00) == 0x2500) || (((bluetooth_class & 0xff00) == 0x500))) && (bluetooth_class & 0x80)) { | |||
| USBHDBGSerial.printf("MouseController::claim_bluetooth TRUE\n"); | |||
| btdevice = (Device_t*)driver; // remember this way | |||
| return true; | |||
| } | |||
| return false; | |||
| } | |||
| bool MouseController::process_bluetooth_HID_data(const uint8_t *data, uint16_t length) | |||
| { | |||
| // Example DATA from bluetooth keyboard: | |||
| // 0 1 2 3 4 5 6 7 8 910 1 2 3 4 5 6 7 | |||
| // LEN D | |||
| //BT rx2_data(14): b 20 a 0 6 0 71 0 a1 2 0 9 fe 0 | |||
| //BT rx2_data(14): b 20 a 0 6 0 71 0 a1 2 0 8 fd 0 | |||
| // So Len=9 passed in data starting at report ID=1... | |||
| if (length == 0) return false; | |||
| #ifdef USBHOST_PRINT_DEBUG | |||
| USBHDBGSerial.printf("MouseController::process_bluetooth_HID_data %d\n", length); | |||
| USBHDBGSerial.printf(" Mouse Data: "); | |||
| const uint8_t *p = (const uint8_t *)data; | |||
| uint16_t len = length; | |||
| do { | |||
| if (*p < 16) USBHDBGSerial.print('0'); | |||
| USBHDBGSerial.print(*p++, HEX); | |||
| USBHDBGSerial.print(' '); | |||
| } while (--len); | |||
| USBHDBGSerial.println(); | |||
| #endif | |||
| // Looks like report 2 is for the mouse info. | |||
| if (data[0] != 2) return false; | |||
| buttons = data[1]; | |||
| mouseX = (int8_t)data[2]; | |||
| mouseY = (int8_t)data[3]; | |||
| if (length >= 5) { | |||
| wheel = (int8_t)data[4]; | |||
| if (length >= 6) { | |||
| wheelH = (int8_t)data[5]; | |||
| } | |||
| } | |||
| mouseEvent = true; | |||
| return true; | |||
| } | |||
| void MouseController::release_bluetooth() | |||
| { | |||
| //btdevice = nullptr; | |||
| } | |||
+ 145
- 145
print.cpp
Переглянути файл
| @@ -34,39 +34,39 @@ | |||
| void USBHost::print_(const Transfer_t *transfer) | |||
| { | |||
| if (!((uint32_t)transfer & 0xFFFFFFE0)) return; | |||
| Serial.print("Transfer @ "); | |||
| Serial.println(((uint32_t)transfer & 0xFFFFFFE0), HEX); | |||
| Serial.print(" next: "); | |||
| Serial.println(transfer->qtd.next, HEX); | |||
| Serial.print(" anext: "); | |||
| Serial.println(transfer->qtd.alt_next, HEX); | |||
| Serial.print(" token: "); | |||
| Serial.println(transfer->qtd.token, HEX); | |||
| Serial.print(" bufs: "); | |||
| USBHDBGSerial.print("Transfer @ "); | |||
| USBHDBGSerial.println(((uint32_t)transfer & 0xFFFFFFE0), HEX); | |||
| USBHDBGSerial.print(" next: "); | |||
| USBHDBGSerial.println(transfer->qtd.next, HEX); | |||
| USBHDBGSerial.print(" anext: "); | |||
| USBHDBGSerial.println(transfer->qtd.alt_next, HEX); | |||
| USBHDBGSerial.print(" token: "); | |||
| USBHDBGSerial.println(transfer->qtd.token, HEX); | |||
| USBHDBGSerial.print(" bufs: "); | |||
| for (int i=0; i < 5; i++) { | |||
| Serial.print(transfer->qtd.buffer[i], HEX); | |||
| if (i < 4) Serial.print(','); | |||
| USBHDBGSerial.print(transfer->qtd.buffer[i], HEX); | |||
| if (i < 4) USBHDBGSerial.print(','); | |||
| } | |||
| Serial.println(); | |||
| USBHDBGSerial.println(); | |||
| } | |||
| void USBHost::print_(const Transfer_t *first, const Transfer_t *last) | |||
| { | |||
| Serial.print("Transfer Followup List "); | |||
| Serial.print((uint32_t)first, HEX); | |||
| Serial.print(" to "); | |||
| Serial.println((uint32_t)last, HEX); | |||
| Serial.println(" forward:"); | |||
| USBHDBGSerial.print("Transfer Followup List "); | |||
| USBHDBGSerial.print((uint32_t)first, HEX); | |||
| USBHDBGSerial.print(" to "); | |||
| USBHDBGSerial.println((uint32_t)last, HEX); | |||
| USBHDBGSerial.println(" forward:"); | |||
| while (first) { | |||
| Serial.print(" "); | |||
| Serial.print((uint32_t)first, HEX); | |||
| USBHDBGSerial.print(" "); | |||
| USBHDBGSerial.print((uint32_t)first, HEX); | |||
| print_token(first->qtd.token); | |||
| first = first->next_followup; | |||
| } | |||
| Serial.println(" backward:"); | |||
| USBHDBGSerial.println(" backward:"); | |||
| while (last) { | |||
| Serial.print(" "); | |||
| Serial.print((uint32_t)last, HEX); | |||
| USBHDBGSerial.print(" "); | |||
| USBHDBGSerial.print((uint32_t)last, HEX); | |||
| print_token(last->qtd.token); | |||
| last = last->prev_followup; | |||
| } | |||
| @@ -76,163 +76,163 @@ void USBHost::print_token(uint32_t token) | |||
| { | |||
| switch ((token >> 8) & 3) { | |||
| case 0: | |||
| Serial.print(" OUT "); | |||
| Serial.println((token >> 16) & 0x7FFF); | |||
| USBHDBGSerial.print(" OUT "); | |||
| USBHDBGSerial.println((token >> 16) & 0x7FFF); | |||
| break; | |||
| case 1: | |||
| Serial.print(" IN "); | |||
| Serial.println((token >> 16) & 0x7FFF); | |||
| USBHDBGSerial.print(" IN "); | |||
| USBHDBGSerial.println((token >> 16) & 0x7FFF); | |||
| break; | |||
| case 2: | |||
| Serial.println(" SETUP"); | |||
| USBHDBGSerial.println(" SETUP"); | |||
| break; | |||
| default: | |||
| Serial.println(" unknown"); | |||
| USBHDBGSerial.println(" unknown"); | |||
| } | |||
| } | |||
| void USBHost::print_(const Pipe_t *pipe) | |||
| { | |||
| if (!((uint32_t)pipe & 0xFFFFFFE0)) return; | |||
| Serial.print("Pipe "); | |||
| if (pipe->type == 0) Serial.print("control"); | |||
| else if (pipe->type == 1) Serial.print("isochronous"); | |||
| else if (pipe->type == 2) Serial.print("bulk"); | |||
| else if (pipe->type == 3) Serial.print("interrupt"); | |||
| Serial.print(pipe->direction ? " IN" : " OUT"); | |||
| Serial.print(" @ "); | |||
| Serial.println((uint32_t)pipe, HEX); | |||
| Serial.print(" horiz link: "); | |||
| Serial.println(pipe->qh.horizontal_link, HEX); | |||
| Serial.print(" capabilities: "); | |||
| Serial.print(pipe->qh.capabilities[0], HEX); | |||
| Serial.print(','); | |||
| Serial.println(pipe->qh.capabilities[1], HEX); | |||
| Serial.println(" overlay:"); | |||
| Serial.print(" cur: "); | |||
| Serial.println(pipe->qh.current, HEX); | |||
| Serial.print(" next: "); | |||
| Serial.println(pipe->qh.next, HEX); | |||
| Serial.print(" anext: "); | |||
| Serial.println(pipe->qh.alt_next, HEX); | |||
| Serial.print(" token: "); | |||
| Serial.println(pipe->qh.token, HEX); | |||
| Serial.print(" bufs: "); | |||
| USBHDBGSerial.print("Pipe "); | |||
| if (pipe->type == 0) USBHDBGSerial.print("control"); | |||
| else if (pipe->type == 1) USBHDBGSerial.print("isochronous"); | |||
| else if (pipe->type == 2) USBHDBGSerial.print("bulk"); | |||
| else if (pipe->type == 3) USBHDBGSerial.print("interrupt"); | |||
| USBHDBGSerial.print(pipe->direction ? " IN" : " OUT"); | |||
| USBHDBGSerial.print(" @ "); | |||
| USBHDBGSerial.println((uint32_t)pipe, HEX); | |||
| USBHDBGSerial.print(" horiz link: "); | |||
| USBHDBGSerial.println(pipe->qh.horizontal_link, HEX); | |||
| USBHDBGSerial.print(" capabilities: "); | |||
| USBHDBGSerial.print(pipe->qh.capabilities[0], HEX); | |||
| USBHDBGSerial.print(','); | |||
| USBHDBGSerial.println(pipe->qh.capabilities[1], HEX); | |||
| USBHDBGSerial.println(" overlay:"); | |||
| USBHDBGSerial.print(" cur: "); | |||
| USBHDBGSerial.println(pipe->qh.current, HEX); | |||
| USBHDBGSerial.print(" next: "); | |||
| USBHDBGSerial.println(pipe->qh.next, HEX); | |||
| USBHDBGSerial.print(" anext: "); | |||
| USBHDBGSerial.println(pipe->qh.alt_next, HEX); | |||
| USBHDBGSerial.print(" token: "); | |||
| USBHDBGSerial.println(pipe->qh.token, HEX); | |||
| USBHDBGSerial.print(" bufs: "); | |||
| for (int i=0; i < 5; i++) { | |||
| Serial.print(pipe->qh.buffer[i], HEX); | |||
| if (i < 4) Serial.print(','); | |||
| USBHDBGSerial.print(pipe->qh.buffer[i], HEX); | |||
| if (i < 4) USBHDBGSerial.print(','); | |||
| } | |||
| Serial.println(); | |||
| USBHDBGSerial.println(); | |||
| const Transfer_t *t = (Transfer_t *)pipe->qh.next; | |||
| while (((uint32_t)t & 0xFFFFFFE0)) { | |||
| print_(t); | |||
| t = (Transfer_t *)t->qtd.next; | |||
| } | |||
| //Serial.print(); | |||
| //USBHDBGSerial.print(); | |||
| } | |||
| void USBHost::print_driverlist(const char *name, const USBDriver *driver) | |||
| { | |||
| Serial.print("USBDriver ("); | |||
| Serial.print(name); | |||
| Serial.print(") list: "); | |||
| USBHDBGSerial.print("USBDriver ("); | |||
| USBHDBGSerial.print(name); | |||
| USBHDBGSerial.print(") list: "); | |||
| if (driver == NULL) { | |||
| Serial.println("(empty"); | |||
| USBHDBGSerial.println("(empty"); | |||
| return; | |||
| } | |||
| uint32_t count=0; | |||
| for (const USBDriver *p = driver; p; p = p->next) { | |||
| Serial.print((uint32_t)p, HEX); | |||
| if (p->next) Serial.print(" -> "); | |||
| USBHDBGSerial.print((uint32_t)p, HEX); | |||
| if (p->next) USBHDBGSerial.print(" -> "); | |||
| if (++count > 30) { | |||
| Serial.println("abort:list too long"); | |||
| USBHDBGSerial.println("abort:list too long"); | |||
| return; | |||
| } | |||
| } | |||
| Serial.println(); | |||
| USBHDBGSerial.println(); | |||
| } | |||
| void USBHost::print_qh_list(const Pipe_t *list) | |||
| { | |||
| if (!list) { | |||
| Serial.println("(empty)"); | |||
| USBHDBGSerial.println("(empty)"); | |||
| return; | |||
| } | |||
| const Pipe_t *node = list; | |||
| while (1) { | |||
| Serial.print((uint32_t)node, HEX); | |||
| USBHDBGSerial.print((uint32_t)node, HEX); | |||
| node = (const Pipe_t *)(node->qh.horizontal_link & 0xFFFFFFE0); | |||
| if (!node) break; | |||
| if (node == list) { | |||
| Serial.print(" (loops)"); | |||
| USBHDBGSerial.print(" (loops)"); | |||
| break; | |||
| } | |||
| Serial.print(" -> "); | |||
| USBHDBGSerial.print(" -> "); | |||
| } | |||
| Serial.println(); | |||
| USBHDBGSerial.println(); | |||
| } | |||
| static void print_class_subclass_protocol(uint8_t c, uint8_t s, uint8_t p) | |||
| { | |||
| Serial.print(c); | |||
| if (c == 3) Serial.print("(HID)"); | |||
| if (c == 8) Serial.print("(Mass Storage)"); | |||
| if (c == 9) Serial.print("(Hub)"); | |||
| Serial.print(" / "); | |||
| Serial.print(s); | |||
| if (c == 3 && s == 1) Serial.print("(Boot)"); | |||
| if (c == 8 && s == 6) Serial.print("(SCSI)"); | |||
| Serial.print(" / "); | |||
| Serial.print(p); | |||
| if (c == 3 && s == 1 && p == 1) Serial.print("(Keyboard)"); | |||
| if (c == 3 && s == 1 && p == 2) Serial.print("(Mouse)"); | |||
| if (c == 8 && s == 6 && p == 0x50) Serial.print("(Bulk Only)"); | |||
| if (c == 8 && s == 6 && p == 0x62) Serial.print("(UAS)"); | |||
| if (c == 9 && s == 0 && p == 1) Serial.print("(Single-TT)"); | |||
| if (c == 9 && s == 0 && p == 2) Serial.print("(Multi-TT)"); | |||
| Serial.println(); | |||
| USBHDBGSerial.print(c); | |||
| if (c == 3) USBHDBGSerial.print("(HID)"); | |||
| if (c == 8) USBHDBGSerial.print("(Mass Storage)"); | |||
| if (c == 9) USBHDBGSerial.print("(Hub)"); | |||
| USBHDBGSerial.print(" / "); | |||
| USBHDBGSerial.print(s); | |||
| if (c == 3 && s == 1) USBHDBGSerial.print("(Boot)"); | |||
| if (c == 8 && s == 6) USBHDBGSerial.print("(SCSI)"); | |||
| USBHDBGSerial.print(" / "); | |||
| USBHDBGSerial.print(p); | |||
| if (c == 3 && s == 1 && p == 1) USBHDBGSerial.print("(Keyboard)"); | |||
| if (c == 3 && s == 1 && p == 2) USBHDBGSerial.print("(Mouse)"); | |||
| if (c == 8 && s == 6 && p == 0x50) USBHDBGSerial.print("(Bulk Only)"); | |||
| if (c == 8 && s == 6 && p == 0x62) USBHDBGSerial.print("(UAS)"); | |||
| if (c == 9 && s == 0 && p == 1) USBHDBGSerial.print("(Single-TT)"); | |||
| if (c == 9 && s == 0 && p == 2) USBHDBGSerial.print("(Multi-TT)"); | |||
| USBHDBGSerial.println(); | |||
| } | |||
| void USBHost::print_device_descriptor(const uint8_t *p) | |||
| { | |||
| Serial.println("Device Descriptor:"); | |||
| Serial.print(" "); | |||
| USBHDBGSerial.println("Device Descriptor:"); | |||
| USBHDBGSerial.print(" "); | |||
| print_hexbytes(p, p[0]); | |||
| if (p[0] != 18) { | |||
| Serial.println("error: device must be 18 bytes"); | |||
| USBHDBGSerial.println("error: device must be 18 bytes"); | |||
| return; | |||
| } | |||
| if (p[1] != 1) { | |||
| Serial.println("error: device must type 1"); | |||
| USBHDBGSerial.println("error: device must type 1"); | |||
| return; | |||
| } | |||
| Serial.printf(" VendorID = %04X, ProductID = %04X, Version = %04X", | |||
| USBHDBGSerial.printf(" VendorID = %04X, ProductID = %04X, Version = %04X", | |||
| p[8] | (p[9] << 8), p[10] | (p[11] << 8), p[12] | (p[13] << 8)); | |||
| Serial.println(); | |||
| Serial.print(" Class/Subclass/Protocol = "); | |||
| USBHDBGSerial.println(); | |||
| USBHDBGSerial.print(" Class/Subclass/Protocol = "); | |||
| print_class_subclass_protocol(p[4], p[5], p[6]); | |||
| Serial.print(" Number of Configurations = "); | |||
| Serial.println(p[17]); | |||
| USBHDBGSerial.print(" Number of Configurations = "); | |||
| USBHDBGSerial.println(p[17]); | |||
| } | |||
| void USBHost::print_config_descriptor(const uint8_t *p, uint32_t maxlen) | |||
| { | |||
| // Descriptor Types: (USB 2.0, page 251) | |||
| Serial.println("Configuration Descriptor:"); | |||
| Serial.print(" "); | |||
| USBHDBGSerial.println("Configuration Descriptor:"); | |||
| USBHDBGSerial.print(" "); | |||
| print_hexbytes(p, p[0]); | |||
| if (p[0] != 9) { | |||
| Serial.println("error: config must be 9 bytes"); | |||
| USBHDBGSerial.println("error: config must be 9 bytes"); | |||
| return; | |||
| } | |||
| if (p[1] != 2) { | |||
| Serial.println("error: config must type 2"); | |||
| USBHDBGSerial.println("error: config must type 2"); | |||
| return; | |||
| } | |||
| Serial.print(" NumInterfaces = "); | |||
| Serial.println(p[4]); | |||
| Serial.print(" ConfigurationValue = "); | |||
| Serial.println(p[5]); | |||
| USBHDBGSerial.print(" NumInterfaces = "); | |||
| USBHDBGSerial.println(p[4]); | |||
| USBHDBGSerial.print(" ConfigurationValue = "); | |||
| USBHDBGSerial.println(p[5]); | |||
| uint32_t len = p[2] | (p[3] << 8); | |||
| if (len > maxlen) len = maxlen; | |||
| @@ -241,48 +241,48 @@ void USBHost::print_config_descriptor(const uint8_t *p, uint32_t maxlen) | |||
| while (len > 0) { | |||
| if (p[0] > len) { | |||
| Serial.print(" "); | |||
| USBHDBGSerial.print(" "); | |||
| print_hexbytes(p, len); | |||
| Serial.println(" error: length beyond total data size"); | |||
| USBHDBGSerial.println(" error: length beyond total data size"); | |||
| break; | |||
| } | |||
| Serial.print(" "); | |||
| USBHDBGSerial.print(" "); | |||
| print_hexbytes(p, p[0]); | |||
| if (p[0] == 9 && p[1] == 4) { // Interface Descriptor | |||
| Serial.print(" Interface = "); | |||
| Serial.println(p[2]); | |||
| Serial.print(" Number of endpoints = "); | |||
| Serial.println(p[4]); | |||
| Serial.print(" Class/Subclass/Protocol = "); | |||
| USBHDBGSerial.print(" Interface = "); | |||
| USBHDBGSerial.println(p[2]); | |||
| USBHDBGSerial.print(" Number of endpoints = "); | |||
| USBHDBGSerial.println(p[4]); | |||
| USBHDBGSerial.print(" Class/Subclass/Protocol = "); | |||
| print_class_subclass_protocol(p[5], p[6], p[7]); | |||
| } else if (p[0] >= 7 && p[0] <= 9 && p[1] == 5) { // Endpoint Descriptor | |||
| Serial.print(" Endpoint = "); | |||
| Serial.print(p[2] & 15); | |||
| Serial.println((p[2] & 128) ? " IN" : " OUT"); | |||
| Serial.print(" Type = "); | |||
| USBHDBGSerial.print(" Endpoint = "); | |||
| USBHDBGSerial.print(p[2] & 15); | |||
| USBHDBGSerial.println((p[2] & 128) ? " IN" : " OUT"); | |||
| USBHDBGSerial.print(" Type = "); | |||
| switch (p[3] & 3) { | |||
| case 0: Serial.println("Control"); break; | |||
| case 1: Serial.println("Isochronous"); break; | |||
| case 2: Serial.println("Bulk"); break; | |||
| case 3: Serial.println("Interrupt"); break; | |||
| case 0: USBHDBGSerial.println("Control"); break; | |||
| case 1: USBHDBGSerial.println("Isochronous"); break; | |||
| case 2: USBHDBGSerial.println("Bulk"); break; | |||
| case 3: USBHDBGSerial.println("Interrupt"); break; | |||
| } | |||
| Serial.print(" Max Size = "); | |||
| Serial.println(p[4] | (p[5] << 8)); | |||
| Serial.print(" Polling Interval = "); | |||
| Serial.println(p[6]); | |||
| USBHDBGSerial.print(" Max Size = "); | |||
| USBHDBGSerial.println(p[4] | (p[5] << 8)); | |||
| USBHDBGSerial.print(" Polling Interval = "); | |||
| USBHDBGSerial.println(p[6]); | |||
| } else if (p[0] == 8 && p[1] == 11) { // IAD | |||
| Serial.print(" Interface Association = "); | |||
| Serial.print(p[2]); | |||
| Serial.print(" through "); | |||
| Serial.println(p[2] + p[3] - 1); | |||
| Serial.print(" Class / Subclass / Protocol = "); | |||
| USBHDBGSerial.print(" Interface Association = "); | |||
| USBHDBGSerial.print(p[2]); | |||
| USBHDBGSerial.print(" through "); | |||
| USBHDBGSerial.println(p[2] + p[3] - 1); | |||
| USBHDBGSerial.print(" Class / Subclass / Protocol = "); | |||
| print_class_subclass_protocol(p[4], p[5], p[7]); | |||
| } else if (p[0] >= 9 && p[1] == 0x21) { // HID | |||
| Serial.print(" HID, "); | |||
| Serial.print(p[5]); | |||
| Serial.print(" report descriptor"); | |||
| if (p[5] != 1) Serial.print('s'); | |||
| Serial.println(); | |||
| USBHDBGSerial.print(" HID, "); | |||
| USBHDBGSerial.print(p[5]); | |||
| USBHDBGSerial.print(" report descriptor"); | |||
| if (p[5] != 1) USBHDBGSerial.print('s'); | |||
| USBHDBGSerial.println(); | |||
| } | |||
| len -= p[0]; | |||
| p += p[0]; | |||
| @@ -293,25 +293,25 @@ void USBHost::print_string_descriptor(const char *name, const uint8_t *p) | |||
| { | |||
| uint32_t len = p[0]; | |||
| if (len < 4) return; | |||
| Serial.print(name); | |||
| USBHDBGSerial.print(name); | |||
| len -= 2; | |||
| p += 2; | |||
| while (len >= 2) { | |||
| uint32_t c = p[0] | (p[1] << 8); | |||
| if (c < 0x80) { | |||
| Serial.write(c); | |||
| USBHDBGSerial.write(c); | |||
| } else if (c < 0x800) { | |||
| Serial.write((c >> 6) | 0xC0); | |||
| Serial.write((c & 0x3F) | 0x80); | |||
| USBHDBGSerial.write((c >> 6) | 0xC0); | |||
| USBHDBGSerial.write((c & 0x3F) | 0x80); | |||
| } else { | |||
| Serial.write((c >> 12) | 0xE0); | |||
| Serial.write(((c >> 6) & 0x3F) | 0x80); | |||
| Serial.write((c & 0x3F) | 0x80); | |||
| USBHDBGSerial.write((c >> 12) | 0xE0); | |||
| USBHDBGSerial.write(((c >> 6) & 0x3F) | 0x80); | |||
| USBHDBGSerial.write((c & 0x3F) | 0x80); | |||
| } | |||
| len -= 2; | |||
| p += 2; | |||
| } | |||
| Serial.println(); | |||
| USBHDBGSerial.println(); | |||
| //print_hexbytes(p, p[0]); | |||
| } | |||
| @@ -321,11 +321,11 @@ void USBHost::print_hexbytes(const void *ptr, uint32_t len) | |||
| if (ptr == NULL || len == 0) return; | |||
| const uint8_t *p = (const uint8_t *)ptr; | |||
| do { | |||
| if (*p < 16) Serial.print('0'); | |||
| Serial.print(*p++, HEX); | |||
| Serial.print(' '); | |||
| if (*p < 16) USBHDBGSerial.print('0'); | |||
| USBHDBGSerial.print(*p++, HEX); | |||
| USBHDBGSerial.print(' '); | |||
| } while (--len); | |||
| Serial.println(); | |||
| USBHDBGSerial.println(); | |||
| } | |||
| #endif | |||
+ 8
- 8
rawhid.cpp
Переглянути файл
| @@ -34,7 +34,7 @@ hidclaim_t RawHIDController::claim_collection(USBHIDParser *driver, Device_t *de | |||
| { | |||
| // only claim RAWHID devices currently: 16c0:0486 | |||
| #ifdef USBHOST_PRINT_DEBUG | |||
| Serial.printf("Rawhid Claim: %x:%x usage: %x\n", dev->idVendor, dev->idProduct, topusage); | |||
| USBHDBGSerial.printf("Rawhid Claim: %x:%x usage: %x\n", dev->idVendor, dev->idProduct, topusage); | |||
| #endif | |||
| if ((dev->idVendor != 0x16c0 || (dev->idProduct) != 0x486)) return CLAIM_NO; | |||
| @@ -59,7 +59,7 @@ void RawHIDController::disconnect_collection(Device_t *dev) | |||
| bool RawHIDController::hid_process_in_data(const Transfer_t *transfer) | |||
| { | |||
| #ifdef USBHOST_PRINT_DEBUG | |||
| Serial.printf("RawHIDController::hid_process_in_data: %x\n", usage_); | |||
| USBHDBGSerial.printf("RawHIDController::hid_process_in_data: %x\n", usage_); | |||
| #endif | |||
| if (receiveCB) { | |||
| @@ -71,7 +71,7 @@ bool RawHIDController::hid_process_in_data(const Transfer_t *transfer) | |||
| bool RawHIDController::hid_process_out_data(const Transfer_t *transfer) | |||
| { | |||
| #ifdef USBHOST_PRINT_DEBUG | |||
| Serial.printf("RawHIDController::hid_process_out_data: %x\n", usage_); | |||
| USBHDBGSerial.printf("RawHIDController::hid_process_out_data: %x\n", usage_); | |||
| #endif | |||
| return true; | |||
| } | |||
| @@ -89,7 +89,7 @@ void RawHIDController::hid_input_begin(uint32_t topusage, uint32_t type, int lgm | |||
| // These should not be called as we are claiming the whole interface and not | |||
| // allowing the parse to happen | |||
| #ifdef USBHOST_PRINT_DEBUG | |||
| Serial.printf("RawHID::hid_input_begin %x %x %x %x\n", topusage, type, lgmin, lgmax); | |||
| USBHDBGSerial.printf("RawHID::hid_input_begin %x %x %x %x\n", topusage, type, lgmin, lgmax); | |||
| #endif | |||
| //hid_input_begin_ = true; | |||
| } | |||
| @@ -99,9 +99,9 @@ void RawHIDController::hid_input_data(uint32_t usage, int32_t value) | |||
| // These should not be called as we are claiming the whole interface and not | |||
| // allowing the parse to happen | |||
| #ifdef USBHOST_PRINT_DEBUG | |||
| Serial.printf("RawHID: usage=%X, value=%d", usage, value); | |||
| if ((value >= ' ') && (value <='~')) Serial.printf("(%c)", value); | |||
| Serial.println(); | |||
| USBHDBGSerial.printf("RawHID: usage=%X, value=%d", usage, value); | |||
| if ((value >= ' ') && (value <='~')) USBHDBGSerial.printf("(%c)", value); | |||
| USBHDBGSerial.println(); | |||
| #endif | |||
| } | |||
| @@ -110,7 +110,7 @@ void RawHIDController::hid_input_end() | |||
| // These should not be called as we are claiming the whole interface and not | |||
| // allowing the parse to happen | |||
| #ifdef USBHOST_PRINT_DEBUG | |||
| Serial.println("RawHID::hid_input_end"); | |||
| USBHDBGSerial.println("RawHID::hid_input_end"); | |||
| #endif | |||
| // if (hid_input_begin_) { | |||
| // hid_input_begin_ = false; | |||
Завантаження…