Added Pacman demo

examples/Bluetooth/Pacman-Teensy-BT/ILI9341_due_config.h

@@ -0,0 +1,56 @@
+/*
+ILI9341_due_config.h - Arduino Due library for interfacing with ILI9341-based TFTs
+
+Code: https://github.com/marekburiak/ILI9341_due
+Documentation: http://marekburiak.github.io/ILI9341_due/
+
+Copyright (c) 2015  Marek Buriak
+
+*/
+
+#ifndef _ILI9341_due_configH_
+#define _ILI9341_due_configH_
+
+// comment out the SPI mode you want to use (does not matter for AVR)
+#define ILI9341_SPI_MODE_NORMAL	// uses SPI library
+//#define ILI9341_SPI_MODE_EXTENDED	// uses Extended SPI in Due, make sure you use pin 4, 10 or 52 for CS
+//#define ILI9341_SPI_MODE_DMA		// uses DMA in Due
+
+// set the clock divider
+#if defined ARDUINO_SAM_DUE
+#define ILI9341_SPI_CLKDIVIDER 4	// for Due
+#elif defined ARDUINO_ARCH_AVR
+#define ILI9341_SPI_CLKDIVIDER SPI_CLOCK_DIV2	// for Uno, Mega,...
+#elif defined(TEENSYDUINO)
+#define SPICLOCK 30000000
+#endif
+
+
+
+// uncomment if you want to use SPI transactions. Uncomment it if the library does not work when used with other libraries.
+#define ILI_USE_SPI_TRANSACTION
+
+// comment out if you do need to use scaled text. The text will draw then faster.
+#define TEXT_SCALING_ENABLED
+
+// default letter spacing
+#define DEFAULT_LETTER_SPACING 2
+
+// default line spacing
+#define DEFAULT_LINE_SPACING 0
+
+// sets the space between lines as part of the text
+//#define LINE_SPACING_AS_PART_OF_LETTERS
+
+// number representing the maximum angle (e.g. if 100, then if you pass in start=0 and end=50, you get a half circle)
+// this can be changed with setArcParams function at runtime
+#define DEFAULT_ARC_ANGLE_MAX 360		
+
+// rotational offset in degrees defining position of value 0 (-90 will put it at the top of circle)
+// this can be changed with setAngleOffset function at runtime
+#define DEFAULT_ANGLE_OFFSET -90	
+
+
+
+
+#endif

examples/Bluetooth/Pacman-Teensy-BT/README.md

@@ -0,0 +1,77 @@
+# Pacman-Arduino-Due / Modified for Teensy 3.6 and T4.x
+Pacman Game for Arduino Due with tft ILI9341 and VGA output support
+
+Pacman Game on Arduino Due with ILI9341 and VGA support (available 2 outputs at the same time), playable with keypad, 5 sample levels, VGA output is 240x320, source code avaliable on Github, Licensed under MIT License.
+
+Original Pacman sketch modified to use a Teensy 3.6/T4 with ILI9341_t3n and USBHost_t36 libraries.  Intended as demo for the incorporating BT or Serial gamepads such as the PS3 and PS4 into a user application.
+
+Originally posted on:
+Arduino Forum:
+
+http://forum.arduino.cc/index.php?topic=375394.0
+
+Video:
+
+https://www.youtube.com/watch?v=2Hdzr6m4QdU
+
+
+
+<pre>
+/******************************************************************************/
+/*                                                                            */
+/*  PACMAN GAME FOR TEENSY                                                    */
+/*                                                                            */
+/******************************************************************************/
+/*  Copyright (c) 2014  Dr. NCX (mirracle.mxx@gmail.com)                      */
+/*                                                                            */
+/* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL              */
+/* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED              */
+/* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR    */
+/* BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES      */
+/* OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,     */
+/* WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,     */
+/* ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS        */
+/* SOFTWARE.                                                                  */
+/*                                                                            */
+/*  MIT license, all text above must be included in any redistribution.       */
+/******************************************************************************/
+/*  Original Pacman sketch modified to use a Teensy 3.6/T4 with ILI9341_t3n   */
+/*  and USBHost_t36 libraries.  Intended as demo for the incorporating BT     */
+/*  or Serial gamepads such as the PS3 and PS4 into a user application.       */
+/*  The original version for the Arduino Due and SNES controllers can be      */
+/*  found at                                                                  */
+/*  https://forum.arduino.cc/index.php?topic=375394.0                         */
+/*  and                                                                       */
+/*  https://github.com/DrNCXCortex/Pacman-Arduino-Due                         */
+/*                                                                            */
+/******************************************************************************/
+/*  ILI9341:                                                                  */
+/*----------------------------------------------------------------------------*/
+/*   8 = RST                                                                  */
+/*   9 = D/C                                                                  */
+/*  10 = CS                                                                   */
+/*  can be changed at user discretion                                         */
+/*----------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------------*/
+/*  KEYPAD:                                                                   */
+/*----------------------------------------------------------------------------*/
+/*  PS3: button START/Pause                                                   */
+/*  	 button SELECT                                                        */
+/*  	 button A/Diamond                                                     */
+/*  	 button B /Circle                                                     */
+/*  	 button UP                                                            */
+/*  	 button DOWN                                                          */
+/*  	 button LEFT                                                          */
+/*  	 button RIGHT                                                         */
+/*                                                                            */
+/*  PS4: button START/Pause = Share on PS4                                    */
+/*  	 button SELECT = Options on PS4                                       */
+/*  	 button A/Square                                                      */
+/*  	 button B /Circle                                                     */
+/*  	 button UP                                                            */
+/*  	 button DOWN                                                          */
+/*  	 button LEFT                                                          */
+/*  	 button RIGHT                                                         */
+/*                                                                            *//******************************************************************************/
+</pre>