Updated some of the init code for the CP210x.

Before it worked with the one USB to serial adapter I had, but
we foudn it id did not work with Adafruit USB adaptor nor with their metro boards

As per the forum posts, worked on combining the claim code for extracting which endpoints are RX and TX and create the pipes and the like.

Also worked on live cases.  Reading and writing to AX servos... Found some issues Probably more to find.

I left in some debug code to help find cases of deleting a pipe may hang.  Also macros in serial.cpp to set or toggle IO pins (when in debug mode). This helps find where things are happing using Logic Analyzer as a way to find the approriate USB packets.

Did a quick add of support for the Slicon Labs CP210x drivers.  Did similar like messages as FTDI, based on their documents on line:
https://www.silabs.com/documents/public/application-notes/AN571.pdf

This commit adds support for at least some of the Serial boards with the
CH341 chipset, tested using a board from sparkfun as well as one from
Amazon.com

The code was rearranged some of the Claim code and added a VID:DID to Serial Type table that I use to map, such that I know some of these devices have multiple valid setups.

Support Begin/End/Begin - Change baud

Added code to support switching baud rates, or more particular be able to call end() and then call begin(...) with same or different baud rate.

Hopefully some support for also releasing DTR when the end is called.

WIP - Start support for the begin(baud, format)

Adding some support to the code to handle some of the different possible format capabilities.

In particualar trying to handle the parity, number of bits and number of stop bits.

hacked up test app, such that if you type in command line like:
"#9600, 7e1"

It will extract the 9600 as the new baud and try to use format 7e1.  I only hard coded a few of these in the test app (8n1, 7e1, 7e2, 8n2)...

Again work in progress.  Took me awhile tofigure out how to do this for ch341 boards as I did not see any documents or code that handled this.  So had to deduce it from differences in USB packets.

Added support for a another Serial type CH341.

Wip - But I do have it working so far at least with a loop back test (RX shorted to TX)

Also Rearranged some of the Claim code and added a VID:DID to Serial Type table that I use to map, such that I know some of these devices have multiple valid setups.

Will test more.  I have several more cheap USB to serial adapter arriving tomorrow.

Removed some of the #if 1
If defs, plus

cleaned up a few comments

This commit should start to allow some Prolific PL2303 devices to work.
Tis device has a rather more complex initialization process than some
of the other devices.

I have tested this some with one device that I used to use to program
some older RS232 based boards plus talk to an SSC-32 device.
Test case is I am able to talk to SSC-32 and if I type in ver<cr>
It does properly return the version number.

The data I am seeing is pretty close to what
was documented in: https://gist.github.com/tommie/89011c5ac06553d5cdb8
as well as what the Linux driver outputs.

I also incorperated Frank's configuration options.

Have some support in place for the CDCACM serial class code.

It appears to be working for talking to a
Teensy that is programmed USB=Serial
or USB=Serial+...

Also test with an USB2AX board which is a Servo controller for Dynamixel servos (AX-12), that is an Atmega32u2 board programmed using LUFA as the USB library.

instead of having each HUB have 7 buffers, which can eat up space.  We have each main object contribute currently one string buffer, which than when we initialize a Device_t we try to allocate one for it, likewise we release it when the Device is released.

Hopefully less memory needed.

Also updated such that the HIDInput classes can not retrieve these strings.

Changed test program to now also have list of HIDInput objects and when I detect a new one, I again print out info on it...