Turns out they are a lot different than other PS3 controllers.
When plugged into USB, it appears like these units do not send
any reports. They do allow us to do pairing (which is differnt)
than other PS3, as well as set the Bulb LED color, which I now
have it alternating colors every few seconds and also it tries
to pair it with a BT dongle
When connected to Bluetooth, it now is setup to generate reports,
as well as again set the bulb color and rumble.
So far it maps the 3 button bytes into the buttons field and then
simply copies most all of the data down into Axis, starting where
the Trigger button is.
JoystickBT.ino was updated, to know about this controller and as
mentioned above in the USB case it tries to pair and plays with the
color of bulb.
In the BT case it tries to display data. I did a quick and dirty
change of the Accel/Gyro like stuff which is probably totally wrong.
Pressing some of the buttons will set bulb color and pressing trigger
will set rumble.
PS3 Motion controller - very little mapping of axis
Did some quick edits, to try this out on my T4. beta
Decided maybe needed top header to mention this currently requires SPIN, ILI9341_t3n libraries, Also thought I would mention which pins, which I made different for T3.6 versis T4.
Also removed the ili9341_due_config.h file as nothing in it was used.
And added a message to the screen saying it was waiting for Joystick object.
Mike S
Kurt Eckhardt