visus
/
toolchain-gcc-arm-embedded


			
							<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<!-- Copyright (C) 1988-2020 Free Software Foundation, Inc.

Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "Funding Free Software", the Front-Cover
Texts being (a) (see below), and with the Back-Cover Texts being (b)
(see below).  A copy of the license is included in the section entitled
"GNU Free Documentation License".

(a) The FSF's Front-Cover Text is:

A GNU Manual

(b) The FSF's Back-Cover Text is:

You have freedom to copy and modify this GNU Manual, like GNU
     software.  Copies published by the Free Software Foundation raise
     funds for GNU development. -->
<!-- Created by GNU Texinfo 6.5, http://www.gnu.org/software/texinfo/ -->
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>Makefile (GNU Compiler Collection (GCC) Internals)</title>

<meta name="description" content="Makefile (GNU Compiler Collection (GCC) Internals)">
<meta name="keywords" content="Makefile (GNU Compiler Collection (GCC) Internals)">
<meta name="resource-type" content="document">
<meta name="distribution" content="global">
<meta name="Generator" content="makeinfo">
<link href="index.html#Top" rel="start" title="Top">
<link href="Option-Index.html#Option-Index" rel="index" title="Option Index">
<link href="index.html#SEC_Contents" rel="contents" title="Table of Contents">
<link href="gcc-Directory.html#gcc-Directory" rel="up" title="gcc Directory">
<link href="Library-Files.html#Library-Files" rel="next" title="Library Files">
<link href="Build.html#Build" rel="prev" title="Build">
<style type="text/css">
<!--
a.summary-letter {text-decoration: none}
blockquote.indentedblock {margin-right: 0em}
blockquote.smallindentedblock {margin-right: 0em; font-size: smaller}
blockquote.smallquotation {font-size: smaller}
div.display {margin-left: 3.2em}
div.example {margin-left: 3.2em}
div.lisp {margin-left: 3.2em}
div.smalldisplay {margin-left: 3.2em}
div.smallexample {margin-left: 3.2em}
div.smalllisp {margin-left: 3.2em}
kbd {font-style: oblique}
pre.display {font-family: inherit}
pre.format {font-family: inherit}
pre.menu-comment {font-family: serif}
pre.menu-preformatted {font-family: serif}
pre.smalldisplay {font-family: inherit; font-size: smaller}
pre.smallexample {font-size: smaller}
pre.smallformat {font-family: inherit; font-size: smaller}
pre.smalllisp {font-size: smaller}
span.nolinebreak {white-space: nowrap}
span.roman {font-family: initial; font-weight: normal}
span.sansserif {font-family: sans-serif; font-weight: normal}
ul.no-bullet {list-style: none}
-->
</style>


</head>

<body lang="en">
<a name="Makefile"></a>
<div class="header">
<p>
Next: <a href="Library-Files.html#Library-Files" accesskey="n" rel="next">Library Files</a>, Previous: <a href="Build.html#Build" accesskey="p" rel="prev">Build</a>, Up: <a href="gcc-Directory.html#gcc-Directory" accesskey="u" rel="up">gcc Directory</a> &nbsp; [<a href="index.html#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="Option-Index.html#Option-Index" title="Index" rel="index">Index</a>]</p>
</div>
<hr>
<a name="Makefile-Targets"></a>
<h4 class="subsection">6.3.4 Makefile Targets</h4>
<a name="index-makefile-targets"></a>
<a name="index-targets_002c-makefile"></a>

<p>These targets are available from the &lsquo;<samp>gcc</samp>&rsquo; directory:
</p>
<dl compact="compact">
<dt><code>all</code></dt>
<dd><p>This is the default target.  Depending on what your build/host/target
configuration is, it coordinates all the things that need to be built.
</p>
</dd>
<dt><code>doc</code></dt>
<dd><p>Produce info-formatted documentation and man pages.  Essentially it
calls &lsquo;<samp>make man</samp>&rsquo; and &lsquo;<samp>make info</samp>&rsquo;.
</p>
</dd>
<dt><code>dvi</code></dt>
<dd><p>Produce DVI-formatted documentation.
</p>
</dd>
<dt><code>pdf</code></dt>
<dd><p>Produce PDF-formatted documentation.
</p>
</dd>
<dt><code>html</code></dt>
<dd><p>Produce HTML-formatted documentation.
</p>
</dd>
<dt><code>man</code></dt>
<dd><p>Generate man pages.
</p>
</dd>
<dt><code>info</code></dt>
<dd><p>Generate info-formatted pages.
</p>
</dd>
<dt><code>mostlyclean</code></dt>
<dd><p>Delete the files made while building the compiler.
</p>
</dd>
<dt><code>clean</code></dt>
<dd><p>That, and all the other files built by &lsquo;<samp>make all</samp>&rsquo;.
</p>
</dd>
<dt><code>distclean</code></dt>
<dd><p>That, and all the files created by <code>configure</code>.
</p>
</dd>
<dt><code>maintainer-clean</code></dt>
<dd><p>Distclean plus any file that can be generated from other files.  Note
that additional tools may be required beyond what is normally needed to
build GCC.
</p>
</dd>
<dt><code>srcextra</code></dt>
<dd><p>Generates files in the source directory that are not version-controlled but
should go into a release tarball.
</p>
</dd>
<dt><code>srcinfo</code></dt>
<dt><code>srcman</code></dt>
<dd><p>Copies the info-formatted and manpage documentation into the source
directory usually for the purpose of generating a release tarball.
</p>
</dd>
<dt><code>install</code></dt>
<dd><p>Installs GCC.
</p>
</dd>
<dt><code>uninstall</code></dt>
<dd><p>Deletes installed files, though this is not supported.
</p>
</dd>
<dt><code>check</code></dt>
<dd><p>Run the testsuite.  This creates a <samp>testsuite</samp> subdirectory that
has various <samp>.sum</samp> and <samp>.log</samp> files containing the results of
the testing.  You can run subsets with, for example, &lsquo;<samp>make check-gcc</samp>&rsquo;.
You can specify specific tests by setting <code>RUNTESTFLAGS</code> to be the name
of the <samp>.exp</samp> file, optionally followed by (for some tests) an equals
and a file wildcard, like:
</p>
<div class="smallexample">
<pre class="smallexample">make check-gcc RUNTESTFLAGS=&quot;execute.exp=19980413-*&quot;
</pre></div>

<p>Note that running the testsuite may require additional tools be
installed, such as Tcl or DejaGnu.
</p></dd>
</dl>

<p>The toplevel tree from which you start GCC compilation is not
the GCC directory, but rather a complex Makefile that coordinates
the various steps of the build, including bootstrapping the compiler
and using the new compiler to build target libraries.
</p>
<p>When GCC is configured for a native configuration, the default action
for <code>make</code> is to do a full three-stage bootstrap.  This means
that GCC is built three times&mdash;once with the native compiler, once with
the native-built compiler it just built, and once with the compiler it
built the second time.  In theory, the last two should produce the same
results, which &lsquo;<samp>make compare</samp>&rsquo; can check.  Each stage is configured
separately and compiled into a separate directory, to minimize problems
due to ABI incompatibilities between the native compiler and GCC.
</p>
<p>If you do a change, rebuilding will also start from the first stage
and &ldquo;bubble&rdquo; up the change through the three stages.  Each stage
is taken from its build directory (if it had been built previously),
rebuilt, and copied to its subdirectory.  This will allow you to, for
example, continue a bootstrap after fixing a bug which causes the
stage2 build to crash.  It does not provide as good coverage of the
compiler as bootstrapping from scratch, but it ensures that the new
code is syntactically correct (e.g., that you did not use GCC extensions
by mistake), and avoids spurious bootstrap comparison
failures<a name="DOCF1" href="#FOOT1"><sup>1</sup></a>.
</p>
<p>Other targets available from the top level include:
</p>
<dl compact="compact">
<dt><code>bootstrap-lean</code></dt>
<dd><p>Like <code>bootstrap</code>, except that the various stages are removed once
they&rsquo;re no longer needed.  This saves disk space.
</p>
</dd>
<dt><code>bootstrap2</code></dt>
<dt><code>bootstrap2-lean</code></dt>
<dd><p>Performs only the first two stages of bootstrap.  Unlike a three-stage
bootstrap, this does not perform a comparison to test that the compiler
is running properly.  Note that the disk space required by a &ldquo;lean&rdquo;
bootstrap is approximately independent of the number of stages.
</p>
</dd>
<dt><code>stage<var>N</var>-bubble (<var>N</var> = 1&hellip;4, profile, feedback)</code></dt>
<dd><p>Rebuild all the stages up to <var>N</var>, with the appropriate flags,
&ldquo;bubbling&rdquo; the changes as described above.
</p>
</dd>
<dt><code>all-stage<var>N</var> (<var>N</var> = 1&hellip;4, profile, feedback)</code></dt>
<dd><p>Assuming that stage <var>N</var> has already been built, rebuild it with the
appropriate flags.  This is rarely needed.
</p>
</dd>
<dt><code>cleanstrap</code></dt>
<dd><p>Remove everything (&lsquo;<samp>make clean</samp>&rsquo;) and rebuilds (&lsquo;<samp>make bootstrap</samp>&rsquo;).
</p>
</dd>
<dt><code>compare</code></dt>
<dd><p>Compares the results of stages 2 and 3.  This ensures that the compiler
is running properly, since it should produce the same object files
regardless of how it itself was compiled.
</p>
</dd>
<dt><code>profiledbootstrap</code></dt>
<dd><p>Builds a compiler with profiling feedback information.  In this case,
the second and third stages are named &lsquo;<samp>profile</samp>&rsquo; and &lsquo;<samp>feedback</samp>&rsquo;,
respectively.  For more information, see the installation instructions.
</p>
</dd>
<dt><code>restrap</code></dt>
<dd><p>Restart a bootstrap, so that everything that was not built with
the system compiler is rebuilt.
</p>
</dd>
<dt><code>stage<var>N</var>-start (<var>N</var> = 1&hellip;4, profile, feedback)</code></dt>
<dd><p>For each package that is bootstrapped, rename directories so that,
for example, <samp>gcc</samp> points to the stage<var>N</var> GCC, compiled
with the stage<var>N-1</var> GCC<a name="DOCF2" href="#FOOT2"><sup>2</sup></a>.
</p>
<p>You will invoke this target if you need to test or debug the
stage<var>N</var> GCC.  If you only need to execute GCC (but you need
not run &lsquo;<samp>make</samp>&rsquo; either to rebuild it or to run test suites),
you should be able to work directly in the <samp>stage<var>N</var>-gcc</samp>
directory.  This makes it easier to debug multiple stages in
parallel.
</p>
</dd>
<dt><code>stage</code></dt>
<dd><p>For each package that is bootstrapped, relocate its build directory
to indicate its stage.  For example, if the <samp>gcc</samp> directory
points to the stage2 GCC, after invoking this target it will be
renamed to <samp>stage2-gcc</samp>.
</p>
</dd>
</dl>

<p>If you wish to use non-default GCC flags when compiling the stage2 and
stage3 compilers, set <code>BOOT_CFLAGS</code> on the command line when doing
&lsquo;<samp>make</samp>&rsquo;.
</p>
<p>Usually, the first stage only builds the languages that the compiler
is written in: typically, C and maybe Ada.  If you are debugging a
miscompilation of a different stage2 front-end (for example, of the
Fortran front-end), you may want to have front-ends for other languages
in the first stage as well.  To do so, set <code>STAGE1_LANGUAGES</code>
on the command line when doing &lsquo;<samp>make</samp>&rsquo;.
</p>
<p>For example, in the aforementioned scenario of debugging a Fortran
front-end miscompilation caused by the stage1 compiler, you may need a
command like
</p>
<div class="example">
<pre class="example">make stage2-bubble STAGE1_LANGUAGES=c,fortran
</pre></div>

<p>Alternatively, you can use per-language targets to build and test
languages that are not enabled by default in stage1.  For example,
<code>make f951</code> will build a Fortran compiler even in the stage1
build directory.
</p>

<div class="footnote">
<hr>
<h4 class="footnotes-heading">Footnotes</h4>

<h3><a name="FOOT1" href="#DOCF1">(1)</a></h3>
<p>Except if the compiler was buggy and miscompiled
some of the files that were not modified.  In this case, it&rsquo;s best
to use <code>make restrap</code>.</p>
<h3><a name="FOOT2" href="#DOCF2">(2)</a></h3>
<p>Customarily, the system compiler
is also termed the <samp>stage0</samp> GCC.</p>
</div>
<hr>
<div class="header">
<p>
Next: <a href="Library-Files.html#Library-Files" accesskey="n" rel="next">Library Files</a>, Previous: <a href="Build.html#Build" accesskey="p" rel="prev">Build</a>, Up: <a href="gcc-Directory.html#gcc-Directory" accesskey="u" rel="up">gcc Directory</a> &nbsp; [<a href="index.html#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="Option-Index.html#Option-Index" title="Index" rel="index">Index</a>]</p>
</div>


</body>
</html>