framework-arduinoteensy-cxx20/libraries/AccelStepper/examples/Quickstop/Quickstop.pde

// Quickstop.pde
// -*- mode: C++ -*-
//
// Check stop handling.
// Calls stop() while the stepper is travelling at full speed, causing
// the stepper to stop as quickly as possible, within the constraints of the
// current acceleration.
//
// Copyright (C) 2012 Mike McCauley
// $Id:  $

#include <AccelStepper.h>

// Define a stepper and the pins it will use
AccelStepper stepper; // Defaults to AccelStepper::FULL4WIRE (4 pins) on 2, 3, 4, 5

void setup()
{  
  stepper.setMaxSpeed(150);
  stepper.setAcceleration(100);
}

void loop()
{    
  stepper.moveTo(500);
  while (stepper.currentPosition() != 300) // Full speed up to 300
    stepper.run();
  stepper.stop(); // Stop as fast as possible: sets new target
  stepper.runToPosition(); 
  // Now stopped after quickstop

  // Now go backwards
  stepper.moveTo(-500);
  while (stepper.currentPosition() != 0) // Full speed basck to 0
    stepper.run();
  stepper.stop(); // Stop as fast as possible: sets new target
  stepper.runToPosition(); 
  // Now stopped after quickstop

}