Merge pull request #291 from FrankBoesing/master

T4: Input TDM, Input TDM2

Audio.h

 #include "input_i2s2.h"
 #include "input_i2s_quad.h"
 #include "input_tdm.h"
+#include "input_tdm2.h"
 #include "input_pdm.h"
 #include "mixer.h"
 #include "output_dac.h"

input_tdm.cpp

 #include <Arduino.h>
 #include "input_tdm.h"
 #include "output_tdm.h"
-#if defined(KINETISK)
+#if defined(KINETISK) || defined(__IMXRT1052__) || defined(__IMXRT1062__)
+#include "utility/imxrt_hw.h"
 
-DMAMEM static uint32_t tdm_rx_buffer[AUDIO_BLOCK_SAMPLES*16];
+DMAMEM __attribute__((aligned(32)))
+static uint32_t tdm_rx_buffer[AUDIO_BLOCK_SAMPLES*16];
 audio_block_t * AudioInputTDM::block_incoming[16] = {
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL
+	nullptr, nullptr, nullptr, nullptr, nullptr, nullptr, nullptr, nullptr,
+	nullptr, nullptr, nullptr, nullptr, nullptr, nullptr, nullptr, nullptr
 };
 bool AudioInputTDM::update_responsibility = false;
 DMAChannel AudioInputTDM::dma(false);
 
 	// TODO: should we set & clear the I2S_RCSR_SR bit here?
 	AudioOutputTDM::config_tdm();
-
+#if defined(KINETISK)
 	CORE_PIN13_CONFIG = PORT_PCR_MUX(4); // pin 13, PTC5, I2S0_RXD0
 	dma.TCD->SADDR = &I2S0_RDR0;
 	dma.TCD->SOFF = 0;
 	I2S0_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE | I2S_RCSR_FR;
 	I2S0_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE; // TX clock enable, because sync'd to TX
 	dma.attachInterrupt(isr);
+#else
+	CORE_PIN7_CONFIG  = 3;  //RX_DATA0
+	IOMUXC_SAI1_RX_DATA0_SELECT_INPUT = 2;
+	dma.TCD->SADDR = &I2S1_RDR0;
+	dma.TCD->SOFF = 0;
+	dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(2) | DMA_TCD_ATTR_DSIZE(2);
+	dma.TCD->NBYTES_MLNO = 4;
+	dma.TCD->SLAST = 0;
+	dma.TCD->DADDR = tdm_rx_buffer;
+	dma.TCD->DOFF = 4;
+	dma.TCD->CITER_ELINKNO = sizeof(tdm_rx_buffer) / 4;
+	dma.TCD->DLASTSGA = -sizeof(tdm_rx_buffer);
+	dma.TCD->BITER_ELINKNO = sizeof(tdm_rx_buffer) / 4;
+	dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
+	dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI1_RX);
+	update_responsibility = update_setup();
+	dma.enable();
+
+	I2S1_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE | I2S_RCSR_FR;
+	I2S1_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE;
+	dma.attachInterrupt(isr);	
+#endif	
 }
 
 // TODO: needs optimization...
 	const uint32_t *src;
 	unsigned int i;
 
-	//digitalWriteFast(3, HIGH);
 	daddr = (uint32_t)(dma.TCD->DADDR);
 	dma.clearInterrupt();
 
 		// need to remove data from the first half
 		src = &tdm_rx_buffer[0];
 	}
-	if (block_incoming[0] != NULL) {
+	if (block_incoming[0] != nullptr) {
+		#if IMXRT_CACHE_ENABLED >=1
+		arm_dcache_delete((void*)src, sizeof(tdm_rx_buffer) / 2);
+		#endif
 		for (i=0; i < 16; i += 2) {
 			uint32_t *dest1 = (uint32_t *)(block_incoming[i]->data);
 			uint32_t *dest2 = (uint32_t *)(block_incoming[i+1]->data);
 		}
 	}
 	if (update_responsibility) update_all();
-	//digitalWriteFast(3, LOW);
 }
 
 
 	// allocate 16 new blocks.  If any fails, allocate none
 	for (i=0; i < 16; i++) {
 		new_block[i] = allocate();
-		if (new_block[i] == NULL) {
+		if (new_block[i] == nullptr) {
 			for (j=0; j < i; j++) {
 				release(new_block[j]);
 			}
 	memcpy(out_block, block_incoming, sizeof(out_block));
 	memcpy(block_incoming, new_block, sizeof(block_incoming));
 	__enable_irq();
-	if (out_block[0] != NULL) {
+	if (out_block[0] != nullptr) {		
 		// if we got 1 block, all 16 are filled
 		for (i=0; i < 16; i++) {
 			transmit(out_block[i], i);
 }
 
 
-#endif // KINETISK
+#endif

input_tdm2.cpp

+/* Audio Library for Teensy 3.X
+ * Copyright (c) 2017, Paul Stoffregen, paul@pjrc.com
+ *
+ * Development of this audio library was funded by PJRC.COM, LLC by sales of
+ * Teensy and Audio Adaptor boards.  Please support PJRC's efforts to develop
+ * open source software by purchasing Teensy or other PJRC products.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice, development funding notice, and this permission
+ * notice shall be included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#if defined(__IMXRT1052__) || defined(__IMXRT1062__)
+#include <Arduino.h>
+#include "input_tdm2.h"
+#include "output_tdm2.h"
+#include "utility/imxrt_hw.h"
+
+DMAMEM __attribute__((aligned(32)))
+static uint32_t tdm_rx_buffer[AUDIO_BLOCK_SAMPLES*16];
+audio_block_t * AudioInputTDM2::block_incoming[16] = {
+	nullptr, nullptr, nullptr, nullptr, nullptr, nullptr, nullptr, nullptr,
+	nullptr, nullptr, nullptr, nullptr, nullptr, nullptr, nullptr, nullptr
+};
+bool AudioInputTDM2::update_responsibility = false;
+DMAChannel AudioInputTDM2::dma(false);
+
+
+void AudioInputTDM2::begin(void)
+{
+	dma.begin(true); // Allocate the DMA channel first
+
+	// TODO: should we set & clear the I2S_RCSR_SR bit here?
+	AudioOutputTDM2::config_tdm();
+
+	CORE_PIN33_CONFIG = 2;  //2:RX_DATA0
+	IOMUXC_SAI2_RX_DATA0_SELECT_INPUT = 0;
+	dma.TCD->SADDR = &I2S2_RDR0;
+	dma.TCD->SOFF = 0;
+	dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(2) | DMA_TCD_ATTR_DSIZE(2);
+	dma.TCD->NBYTES_MLNO = 4;
+	dma.TCD->SLAST = 0;
+	dma.TCD->DADDR = tdm_rx_buffer;
+	dma.TCD->DOFF = 4;
+	dma.TCD->CITER_ELINKNO = sizeof(tdm_rx_buffer) / 4;
+	dma.TCD->DLASTSGA = -sizeof(tdm_rx_buffer);
+	dma.TCD->BITER_ELINKNO = sizeof(tdm_rx_buffer) / 4;
+	dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
+	dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI2_RX);
+	update_responsibility = update_setup();
+	dma.enable();
+
+	I2S2_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE | I2S_RCSR_FR;
+	I2S2_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE;
+	dma.attachInterrupt(isr);	
+
+}
+
+// TODO: needs optimization...
+static void memcpy_tdm_rx(uint32_t *dest1, uint32_t *dest2, const uint32_t *src)
+{
+	uint32_t i, in1, in2;
+
+	for (i=0; i < AUDIO_BLOCK_SAMPLES/2; i++) {
+		in1 = *src;
+		in2 = *(src+8);
+		src += 16;
+		*dest1++ = (in1 >> 16) | (in2 & 0xFFFF0000);
+		*dest2++ = (in1 << 16) | (in2 & 0x0000FFFF);
+	}
+}
+
+void AudioInputTDM2::isr(void)
+{
+	uint32_t daddr;
+	const uint32_t *src;
+	unsigned int i;
+
+	daddr = (uint32_t)(dma.TCD->DADDR);
+	dma.clearInterrupt();
+
+	if (daddr < (uint32_t)tdm_rx_buffer + sizeof(tdm_rx_buffer) / 2) {
+		// DMA is receiving to the first half of the buffer
+		// need to remove data from the second half
+		src = &tdm_rx_buffer[AUDIO_BLOCK_SAMPLES*8];
+	} else {
+		// DMA is receiving to the second half of the buffer
+		// need to remove data from the first half
+		src = &tdm_rx_buffer[0];
+	}
+	if (block_incoming[0] != nullptr) {
+		#if IMXRT_CACHE_ENABLED >=1
+		arm_dcache_delete((void*)src, sizeof(tdm_rx_buffer) / 2);
+		#endif
+		for (i=0; i < 16; i += 2) {
+			uint32_t *dest1 = (uint32_t *)(block_incoming[i]->data);
+			uint32_t *dest2 = (uint32_t *)(block_incoming[i+1]->data);
+			memcpy_tdm_rx(dest1, dest2, src);
+			src++;
+		}
+	}
+	if (update_responsibility) update_all();
+}
+
+
+void AudioInputTDM2::update(void)
+{
+	unsigned int i, j;
+	audio_block_t *new_block[16];
+	audio_block_t *out_block[16];
+
+	// allocate 16 new blocks.  If any fails, allocate none
+	for (i=0; i < 16; i++) {
+		new_block[i] = allocate();
+		if (new_block[i] == nullptr) {
+			for (j=0; j < i; j++) {
+				release(new_block[j]);
+			}
+			memset(new_block, 0, sizeof(new_block));
+			break;
+		}
+	}
+	__disable_irq();
+	memcpy(out_block, block_incoming, sizeof(out_block));
+	memcpy(block_incoming, new_block, sizeof(block_incoming));
+	__enable_irq();
+	if (out_block[0] != nullptr) {		
+		// if we got 1 block, all 16 are filled
+		for (i=0; i < 16; i++) {
+			transmit(out_block[i], i);
+			release(out_block[i]);
+		}
+	}
+}
+
+
+#endif

input_tdm2.h

+/* Audio Library for Teensy 3.X
+ * Copyright (c) 2017, Paul Stoffregen, paul@pjrc.com
+ *
+ * Development of this audio library was funded by PJRC.COM, LLC by sales of
+ * Teensy and Audio Adaptor boards.  Please support PJRC's efforts to develop
+ * open source software by purchasing Teensy or other PJRC products.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice, development funding notice, and this permission
+ * notice shall be included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#if defined(__IMXRT1052__) || defined(__IMXRT1062__)
+#ifndef _input_tdm2_h_
+#define _input_tdm2_h_
+
+#include "Arduino.h"
+#include "AudioStream.h"
+#include "DMAChannel.h"
+
+class AudioInputTDM2 : public AudioStream
+{
+public:
+	AudioInputTDM2(void) : AudioStream(0, NULL) { begin(); }
+	virtual void update(void);
+	void begin(void);
+protected:	
+	static bool update_responsibility;
+	static DMAChannel dma;
+	static void isr(void);
+private:
+	static audio_block_t *block_incoming[16];
+};
+
+#endif
+#endif

keywords.txt

 AudioInputI2SQuad	KEYWORD2
 AudioInputI2Sslave	KEYWORD2
 AudioInputTDM	KEYWORD2
+AudioInputTDM2	KEYWORD2
 AudioInputPDM	KEYWORD2
 AudioInputUSB	KEYWORD2
 AudioOutputI2S	KEYWORD2

output_i2s2.cpp

 #include <Arduino.h>
 #include "output_i2s2.h"
 #include "memcpy_audio.h"
+#include "utility/imxrt_hw.h"
 
 audio_block_t * AudioOutputI2S2::block_left_1st = NULL;
 audio_block_t * AudioOutputI2S2::block_right_1st = NULL;
 
 void AudioOutputI2S2::isr(void)
 {
-	int16_t *dest;
+	int16_t *dest, *dc;
 	audio_block_t *blockL, *blockR;
 	uint32_t saddr, offsetL, offsetR;
 

output_tdm2.cpp

  * THE SOFTWARE.
  */
 
- #if defined(__IMXRT1052__) || defined(__IMXRT1062__)
+#if defined(__IMXRT1052__) || defined(__IMXRT1062__)
 #include <Arduino.h>
 #include "output_tdm2.h"
 #include "memcpy_audio.h"
 
 	CCM_CCGR5 |= CCM_CCGR5_SAI2(CCM_CCGR_ON);
 //PLL:
-	int fs = AUDIO_SAMPLE_RATE_EXACT*2; //176.4 khZ
+	int fs = AUDIO_SAMPLE_RATE_EXACT; //176.4 khZ
 	// PLL between 27*24 = 648MHz und 54*24=1296MHz
 	int n1 = 4; //SAI prescaler 4 => (n1*n2) = multiple of 4
 	int n2 = 1 + (24000000 * 27) / (fs * 256 * n1);
 	CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI2_CLK_SEL_MASK))
 		   | CCM_CSCMR1_SAI2_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4
 
-	//n1 = n1 / 2; //Double Speed for TDM
+	n1 = n1 / 2; //Double Speed for TDM
 
 	CCM_CS2CDR = (CCM_CS2CDR & ~(CCM_CS2CDR_SAI2_CLK_PRED_MASK | CCM_CS2CDR_SAI2_CLK_PODF_MASK))
 		   | CCM_CS2CDR_SAI2_CLK_PRED(n1-1) // &0x07