浏览代码

Fix simultaneous input & output on I2S2

dds
PaulStoffregen 4 年前
父节点
当前提交
ec61d34dd5
共有 2 个文件被更改,包括 29 次插入24 次删除
  1. +5
    -8
      input_i2s2.cpp
  2. +24
    -16
      output_i2s2.cpp

+ 5
- 8
input_i2s2.cpp 查看文件

@@ -48,8 +48,8 @@ void AudioInputI2S2::begin(void)
// TODO: should we set & clear the I2S_RCSR_SR bit here?
AudioOutputI2S2::config_i2s();

CORE_PIN5_CONFIG = 2; //2:RX_DATA0
IOMUXC_SAI2_RX_DATA0_SELECT_INPUT = 0;
CORE_PIN5_CONFIG = 2; //EMC_08, 2=SAI2_RX_DATA, page 434
IOMUXC_SAI2_RX_DATA0_SELECT_INPUT = 0; // 0=GPIO_EMC_08_ALT2, page 876

dma.TCD->SADDR = (void *)((uint32_t)&I2S2_RDR0+2);
dma.TCD->SOFF = 0;
@@ -63,14 +63,13 @@ void AudioInputI2S2::begin(void)
dma.TCD->BITER_ELINKNO = sizeof(i2s2_rx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI2_RX);
dma.enable();

I2S2_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE;
I2S2_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE;
I2S2_RCSR = I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE | I2S_RCSR_FR; // page 2099
I2S2_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE; // page 2087

update_responsibility = update_setup();
dma.enable();
dma.attachInterrupt(isr);
//pinMode(13, OUTPUT);
}

void AudioInputI2S2::isr(void)
@@ -80,7 +79,6 @@ void AudioInputI2S2::isr(void)
int16_t *dest_left, *dest_right;
audio_block_t *left, *right;

//digitalWriteFast(13, HIGH);
daddr = (uint32_t)(dma.TCD->DADDR);
dma.clearInterrupt();

@@ -115,7 +113,6 @@ void AudioInputI2S2::isr(void)
} while (src < end);
}
}
//digitalWriteFast(13, LOW);
}



+ 24
- 16
output_i2s2.cpp 查看文件

@@ -49,7 +49,12 @@ void AudioOutputI2S2::begin(void)
block_right_1st = NULL;

config_i2s();
CORE_PIN2_CONFIG = 2; //2:TX_DATA0

// if AudioInputI2S2 set I2S_TCSR_TE (for clock sync), disable it
I2S2_TCSR = 0;
while (I2S2_TCSR & I2S_TCSR_TE) ; //wait for transmit disabled

CORE_PIN2_CONFIG = 2; //EMC_04, 2=SAI2_TX_DATA, page 428

dma.TCD->SADDR = i2s2_tx_buffer;
dma.TCD->SOFF = 2;
@@ -63,11 +68,12 @@ void AudioOutputI2S2::begin(void)
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
dma.TCD->DADDR = (void *)((uint32_t)&I2S2_TDR0 + 2);
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_SAI2_TX);
// I2S2_RCSR |= I2S_RCSR_RE;
I2S2_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE;
dma.enable();

I2S2_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE | I2S_TCSR_FRDE | I2S_TCSR_FR;

update_responsibility = update_setup();
dma.attachInterrupt(isr);
dma.enable();
}

void AudioOutputI2S2::isr(void)
@@ -184,6 +190,10 @@ void AudioOutputI2S2::update(void)
void AudioOutputI2S2::config_i2s(void)
{
CCM_CCGR5 |= CCM_CCGR5_SAI2(CCM_CCGR_ON);

// if either transmitter or receiver is enabled, do nothing
if (I2S2_TCSR & I2S_TCSR_TE) return;
if (I2S2_RCSR & I2S_RCSR_RE) return;
//PLL:
int fs = AUDIO_SAMPLE_RATE_EXACT;
// PLL between 27*24 = 648MHz und 54*24=1296MHz
@@ -200,18 +210,14 @@ void AudioOutputI2S2::config_i2s(void)
CCM_CSCMR1 = (CCM_CSCMR1 & ~(CCM_CSCMR1_SAI2_CLK_SEL_MASK))
| CCM_CSCMR1_SAI2_CLK_SEL(2); // &0x03 // (0,1,2): PLL3PFD0, PLL5, PLL4,
CCM_CS2CDR = (CCM_CS2CDR & ~(CCM_CS2CDR_SAI2_CLK_PRED_MASK | CCM_CS2CDR_SAI2_CLK_PODF_MASK))
| CCM_CS2CDR_SAI2_CLK_PRED(n1-1)
| CCM_CS2CDR_SAI2_CLK_PRED(n1-1)
| CCM_CS2CDR_SAI2_CLK_PODF(n2-1);
IOMUXC_GPR_GPR1 = (IOMUXC_GPR_GPR1 & ~(IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL_MASK))
| (IOMUXC_GPR_GPR1_SAI2_MCLK_DIR | IOMUXC_GPR_GPR1_SAI2_MCLK3_SEL(0)); //Select MCLK

// if either transmitter or receiver is enabled, do nothing
if (I2S2_TCSR & I2S_TCSR_TE) return;
if (I2S2_RCSR & I2S_RCSR_RE) return;

CORE_PIN33_CONFIG = 2; //2:MCLK
CORE_PIN4_CONFIG = 2; //2:TX_BCLK
CORE_PIN3_CONFIG = 2; //2:TX_SYNC
CORE_PIN33_CONFIG = 2; //EMC_07, 2=SAI2_MCLK
CORE_PIN4_CONFIG = 2; //EMC_06, 2=SAI2_TX_BCLK
CORE_PIN3_CONFIG = 2; //EMC_05, 2=SAI2_TX_SYNC, page 429

int rsync = 1;
int tsync = 0;
@@ -220,18 +226,20 @@ void AudioOutputI2S2::config_i2s(void)
//I2S2_TCSR = (1<<25); //Reset
I2S2_TCR1 = I2S_TCR1_RFW(1);
I2S2_TCR2 = I2S_TCR2_SYNC(tsync) | I2S_TCR2_BCP // sync=0; tx is async;
| (I2S_TCR2_BCD | I2S_TCR2_DIV((1)) | I2S_TCR2_MSEL(1));
| (I2S_TCR2_BCD | I2S_TCR2_DIV((1)) | I2S_TCR2_MSEL(1));
I2S2_TCR3 = I2S_TCR3_TCE;
I2S2_TCR4 = I2S_TCR4_FRSZ((2-1)) | I2S_TCR4_SYWD((32-1)) | I2S_TCR4_MF | I2S_TCR4_FSD | I2S_TCR4_FSE | I2S_TCR4_FSP;
I2S2_TCR4 = I2S_TCR4_FRSZ((2-1)) | I2S_TCR4_SYWD((32-1)) | I2S_TCR4_MF
| I2S_TCR4_FSD | I2S_TCR4_FSE | I2S_TCR4_FSP;
I2S2_TCR5 = I2S_TCR5_WNW((32-1)) | I2S_TCR5_W0W((32-1)) | I2S_TCR5_FBT((32-1));

I2S2_RMR = 0;
//I2S2_RCSR = (1<<25); //Reset
I2S2_RCR1 = I2S_RCR1_RFW(1);
I2S2_RCR2 = I2S_RCR2_SYNC(rsync) | I2S_RCR2_BCP // sync=0; rx is async;
| (I2S_RCR2_BCD | I2S_RCR2_DIV((1)) | I2S_RCR2_MSEL(1));
| (I2S_RCR2_BCD | I2S_RCR2_DIV((1)) | I2S_RCR2_MSEL(1));
I2S2_RCR3 = I2S_RCR3_RCE;
I2S2_RCR4 = I2S_RCR4_FRSZ((2-1)) | I2S_RCR4_SYWD((32-1)) | I2S_RCR4_MF | I2S_RCR4_FSE | I2S_RCR4_FSP | I2S_RCR4_FSD;
I2S2_RCR4 = I2S_RCR4_FRSZ((2-1)) | I2S_RCR4_SYWD((32-1)) | I2S_RCR4_MF
| I2S_RCR4_FSE | I2S_RCR4_FSP | I2S_RCR4_FSD;
I2S2_RCR5 = I2S_RCR5_WNW((32-1)) | I2S_RCR5_W0W((32-1)) | I2S_RCR5_FBT((32-1));

}

正在加载...
取消
保存