teensy-audio

提交图

作者	SHA1	备注	提交日期
PaulStoffregen	5c5b4e80ad	Add SPH0645 microphone example	4 年前
PaulStoffregen	66d89d911c	Add PassThroughADCtoI2S example	4 年前
awalch6679	73e562a94d	async_spdif_input.h added to audio header	4 年前
awalch6679	834ac4d31f	async spdif input added	4 年前
PaulStoffregen	d256c82aa6	Fix I2S slave mode on Teensy 4.0	4 年前
PaulStoffregen	828ea4a74c	WM8731 has flaky I2C communication workaround	5 年前
PaulStoffregen	475e670e76	Add comment to WM8731MikroSine example, for alternate wiring	5 年前
PaulStoffregen	e4fcedd834	Update WM8731 documentation	6 年前
PaulStoffregen	e83ddeefdd	Add WM8731 inputSelect() function and update example	6 年前
PaulStoffregen	98a6be4511	Add ADAT 8 channel TOSLINK output by Ernstjan Freriks https://forum.pjrc.com/threads/28639-S-pdif?p=159530&viewfull=1#post159530	7 年前
PaulStoffregen	ca594397d7	Better volume scaling in PassThroughUSB example	7 年前
PaulStoffregen	ba2b4981d1	Add volume adjust to PassThroughUSB example	7 年前
PaulStoffregen	a8b02e2468	Update all examples to document all SD card options	7 年前
PaulStoffregen	c8d680c4a0	Document Macintosh USB audio workaround	7 年前
PaulStoffregen	ea14e9b083	Fix card init function in SdCardTest example	8 年前
PaulStoffregen	248b6d25cc	Add PT8211 documentation and example	8 年前
PaulStoffregen	6381c771c9	Add comments to USB examples	8 年前
PaulStoffregen	a1975344d0	Add USB examples	8 年前
PaulStoffregen	08a6367d03	Work around multi-line function limit in Arduino 1.6.7	8 年前
PaulStoffregen	f12071604f	Add PassThroughQuad example	8 年前
PaulStoffregen	54ce35d3ff	Add ability to control two SGTL5000 chips	8 年前
PaulStoffregen	3cc5a15122	Add dacVolumeRamp documentation	8 年前
PaulStoffregen	d427b99a2e	Opps, include SerialFlash in VolumeRamp example (for Arduino < 1.6.7)	8 年前
PaulStoffregen	238ec19741	Add SGTL5000 dacVolumeRamp functions & example	8 年前
MickMad	553bbcd5cd	Fixed control functions, examples, GUI elements	9 年前
Michele Perla	967ba4c462	Fixed registers configuration, added two examples One write was out-of-bounds due to worng address put (I was using the device address rather than the register address), another write overwrote the Power Management register with the Mode Control register. Now everything works. Added two exampes: SineOutTest that puts two sinewaves on the outputs, and PassthroughTest that connects the two inputs to the two outputs.	9 年前
Michele Perla	1c7fccfb07	Enabled PIN_PDN as OUTPUT The PIN_PDN was not set as output, therefore it would not transition to LOW for 150 ns and then stay HIGH to properly enable the CODEC. The CODEC now powers up, at least.	9 年前
Michele Perla	ca4413c9f1	Added SineOutTest in AK4558 Examples folder The test puts a 440 Hz sinewave on one channel, and a 220 Hz on the other	9 年前
PaulStoffregen	f13e51ee97	Add AudioPlaySerialflashRaw https://forum.pjrc.com/threads/27409-Play-RAW-from-Serial-Flash?p=77666#post77666	9 年前
PaulStoffregen	700cb656c1	Shorten example folder from SGTL5000_Specific to SGTL5000	10 年前
PaulStoffregen	4346fff2fa	Update WM8731 example	10 年前
PaulStoffregen	673b7aef49	Update SdCardTest example	10 年前
PaulStoffregen	0891e07bac	Update examples	10 年前
PaulStoffregen	e8cb4897b0	Avoid allocating unneeded DMA channels	10 年前
PaulStoffregen	bdd67504ef	Make input ADC and output DAC play nicely together	10 年前
PaulStoffregen	9f167ace1f	Udate SGTL5000 examples	10 年前
PaulStoffregen	98ee40d596	Rearrange Examples	10 年前

37 次代码提交 (0d938fe01a0f6117a3ae9fce22a894c269dbd1ff)