Fixed analog comparators IRQ names.

T4.1 - Serial8 is on pins 34 and 35

It was defaulting to the same NUM_DIGITAL_PINS and NUM_ANALOG_INPUTS as the T4.0 so updated for the new pins

There are two pins on the SDCard IO pins that are valid alternate pins for Serial5
Serial5.setRX or setTX.

These pin numbers changed from T4 to T4.1 so update table depending on which board.

Serial8 is now defined for T4.1.

Previously it was defined for T4B1, but went away on T4B2 and released.  It is now defined on the T4.1

fix panic-temp power off

The fix of IOMUXC_GPR_GPR16 disabled the power-off on panic-alarm, this should fix it.

T4 - USB Keyboard support LEDS

USB Flightsim for Teensy 4, add FlightSimData and FlightSimEvent data types for T3

Needs accompanying changes in Arduino's boards.txt, enabling corresponding menu entries

Sorry pasted in wrong code.

Migrated the T3 code over to handle the message to set the logical keyboard LEDS

As per forum thread: https://forum.pjrc.com/threads/59372-Teensy-4-0-no-support-for-keyboard_leds

SCB_ID_CSSELR is not const

T4 IntervalTimer - change limit magic number

Longer term we might consider changing timer over to using system clock, with default(max) divisior of 4 to go to PID instead of fixed 24mhz...

But in the mean time, try to allow IntervalTimer Settings that work at least as well as default settings for T3.2 whoes BUS speed is 48mhz, so the magic number of 36 was used which allowed a minimum value passed into begin/update of 36
48*.75-.5

With T4 code we just blindly left the magic number of 36...  So this one simply sort of halves it.  24*.75-.5 ... I rounded down to 17

fixes #418

fixes #293, fixes #414

T4 IntervalTimer Priority

If you call set priority it was only looking at priority of first two items, even though there could be 4.  The main code that started an interrupt checked all 4. So I sort of copied that code over, only change was to simply set the top_priority to the first item to start with instead of 255 and then look at the first item

Update imxrt.h

Add T4 ADC_ETC definitions for bits plus structure

Decided to go to the format that is closer to the the manual to
and use names like: chain_1_0, chain_3_2...

https://forum.pjrc.com/threads/58667-Temboo-library-error-Unknown-type-name-bool

T4 - Can now handle sketches with main() instead of setup()/loop()