void (* _VectorsRam[160+16])(void);

Fleshing out some of the missing pieces. - Need to test
copy NVIC execution priority from T3
Set priority per Serial object

RTS pin
CTS pin - only Serial3 supports
setRX, setTX - do nothing none of these have two pins defined.

Maybe temporary - but added from previous code ability to add second buffer for RX and TX

Put in code to read all of the current stuff in Receive queue on Interrupt..

..use NVIC_NUM_INTERRUPTS instead 
i know, very minor documentational issue :)

Used macros from OneWIre to fast set/clear the optional Transmitter Enable support.

Also fixed bug in ISR where was not properly looking for TC.  This will help make SerialX->flush() to work

T4 - Hardware Serial - Pass 1

Update AudioStream.cpp

add shiftIn/Out, pulseIn

Wrong RX_Select value

This pass has some more support for using the Hardware Serial objects.

Including setting an ISR for doing both reads and writes,  sets up the FIFO,

Sitll lots more work to go.

Things like: fifo - need to better understand/set watermarks, also RX need to read in more than one byte if more available.

Also support fo r other features, like formats, 9 bit, ...

BUt at least you can do simple reads/writes

optimized delayNanoseconds

shifting both sides by 16 bit gives pretty good accuracy with fast code:
        movw    r3, #9155
        ldr     r2, .L2
        mul     r0, r3, r0
        lsrs    r0, r0, #1
        umull   r3, r0, r2, r0
        lsrs    r0, r0, #8
.L2:
        .word   144122641

with 984 MHz it allows nsec to be max ~143000  max which is plenty

fast memcpy/memset

Add delayNanoseconds()

This makes sense now, and would be useful for shorter wait-times. Could be used for PulseIn etc.  where we need defined very short delays.

fix warning "implicit declaration of function 'delay'"

Renumbered IRQ_RESERVED1-7, IRQ_SOFTWARE = 62

corrected SAI1/3_CLK_PODF

SCB_SHPR3 = 0x20000000;  // Systick = priority 32

default 128 priority for all interrupts

SPDIF register bit defs