Kurt Eckhardt
44027e2115
Add serialEvent6 to yield
vor 8 Jahren
PaulStoffregen
12421ba5a9
Add new Arduino pin defines
vor 8 Jahren
PaulStoffregen
731d9123f6
Keycode for Non-US backslash (thanks parsnip42)
fixes #159
vor 8 Jahren
PaulStoffregen
d46a56a811
Fix USB audio feedback endpoint attributes
vor 8 Jahren
Kurt Eckhardt
89d92016c1
Pass at serial6_format
vor 8 Jahren
Kurt Eckhardt
d2f9acc78c
Try using BITBAND to turn on/off TIE and TCIE
Make update of these flags be hopefully interrupt safe
vor 8 Jahren
Kurt Eckhardt
7352ea7791
Add Serial6 - T3.4 Uart5, T3.5 LPUart0
This is a WIP, But I have now been able to create Serial6 on T3.4 beta,
and so far have tested Send/Receive basic stuff at 115200 and have tried
at several CPU speeds in MHZ (192, 216, 180, 120, 96)
vor 8 Jahren
Kurt Eckhardt
c79a667e31
T T3.4 T3.5 SPI2 support
vor 8 Jahren
PaulStoffregen
50c805926f
Improve flash security documentation
vor 8 Jahren
sumotoy
892d07181d
missed pin 26
vor 8 Jahren
duff2013
c5c14007bb
trigger mode enable cmp register def
vor 8 Jahren
PaulStoffregen
88dce04d81
Add extra K66 pin defines
vor 8 Jahren
Kurt Eckhardt
1bb20b3b61
Serial2.setTx and Serial2.setRX should check Uart1
These two functions were checking (SIM_SCGC4 & SIM_SCGC4_UART2)
and should be testing (SIM_SCGC4 & SIM_SCGC4_UART1)
vor 8 Jahren
PaulStoffregen
bb95e546fe
Increase startup delay slightly
vor 8 Jahren
PaulStoffregen
aeff63583d
Document flash security locking technique
vor 8 Jahren
PaulStoffregen
39d9fdc386
Fix compiler warnings with USB audio
vor 8 Jahren
Frank
61dce339b0
fix SDHC_XFERTYP_RSPTYP
vor 8 Jahren
PaulStoffregen
de0677a6e0
Enable VREF on K66
fixes #145
vor 8 Jahren
Kurt Eckhardt
eb97df1ffe
PulseIn on LC issue
PulseIn may fail on LC as it is using *reg to test the value for on or
off, but on LC register is a bitmask associated with several IO pins.
So split off for LC to use the MASK value for the pin to test high and
low.
Warning did not update timings for this, which may be necessary as adds
an & in the loop. However when I tried TLC for 5000us timeout, it timed
out with 5138us, if I decremented the PULSEIN_LOOPS_PER_USEC by one,
then it timed out at 4398... This was at 49mhz.
vor 8 Jahren
PaulStoffregen
4b7151d0e0
Fix compiler warning with Keyboard.set_modifier
vor 8 Jahren
Kurt Eckhardt
57be6914a5
Serial1 - New pins work with begin
vor 8 Jahren
Kurt Eckhardt
94ce960eef
SPCR1 operations now defined
vor 8 Jahren
PaulStoffregen
31c9626281
Fix some USBHS register bit names
vor 8 Jahren
duff2013
87274341bd
Set FlexBus Clock Divider to correct value for 16, 8, 4 MHz
vor 8 Jahren
duff2013
484098c794
update LLWU reg.
vor 8 Jahren
PaulStoffregen
9f1f15a53e
Add SDHC register bit defs
vor 8 Jahren
PaulStoffregen
0e35a31068
Add ethernet register bit defs
vor 8 Jahren
PaulStoffregen
fdf57f66c6
Add USBHS register bit defs
vor 8 Jahren
Kurt Eckhardt
1c2f6dca35
Optional: Add SPI2...
Just in case the extra pads are added to bottom of 3.4/3.5 board,
define is in place...
vor 8 Jahren
Kurt Eckhardt
305fb4da93
SPI1 on T3.4/3.5 - Add SPCR1
vor 8 Jahren
Kurt Eckhardt
91f8f30c04
Add SPI1 to kinetis.h for T3.4 and T3.5
Added define for SPI1 registers
vor 8 Jahren
Frank
c0921e7b0d
add additonal F_TIMER (FTM_MOD)
...were missing :)
vor 8 Jahren
PaulStoffregen
d79723c252
Easier F_BUS overclocking
vor 8 Jahren
PaulStoffregen
be42e0574e
Fix DMA on K66
vor 8 Jahren
Frank Bösing
dfd60bee72
add missing F_BUS to SPIFIFO
vor 8 Jahren
Frank Bösing
8752969dbb
Add missing F_BUS
vor 8 Jahren
PaulStoffregen
e2e07e5394
Fix DMAMUX for K66
vor 8 Jahren
PaulStoffregen
ddb7fb0267
Add I2C clock divider names
vor 8 Jahren
PaulStoffregen
575f309209
Fix EEPROM on K66
vor 8 Jahren
PaulStoffregen
759ba1b417
Fix touchRead on K66
vor 8 Jahren
PaulStoffregen
7a2c0037b8
Use IRC48M clock for USB when F_CPU is 180 or 216 MHz
vor 8 Jahren
PaulStoffregen
6856d4eedc
Fix analogRead on K66
vor 8 Jahren
PaulStoffregen
7c963d5269
Use SIM_SCGC6 for RNG to match register defs
vor 8 Jahren
PaulStoffregen
5eab8dd0b8
Fix pin numbers for transmit opendrain on Serial4 & Serial5
vor 8 Jahren
Kurt Eckhardt
7458590a29
Allow SetTX on Serial3/4/5 ...
On Serial 3 this addition is for all 3.x. Before it was ifdefed to only
do work on Teensy_LC as there is only one valid TX pin. But we now pass
in open drain as an option so this code should allow you to not turn it
on/off on Serial3 on all of these boards
and on Serial4 and Serial5 on the new boards.
vor 8 Jahren
Frank
27f9bd8f0f
Frix for crash @ 48 & 24MHz
vor 8 Jahren
Kurt Eckhardt
c9bec4c380
Serial2 - !TX(31) !RX(26) on T3.5
Updated Serial2.
It had valid TX for T3.2 of 10 and 31, but 31 on T3.5 is RX4
Likewise RX for T3.2 of 9 and 26, but on T3.5 26 is RX1
vor 8 Jahren
Kurt Eckhardt
491e1e21ca
Add support for pins 26 and 27
vor 8 Jahren
PaulStoffregen
8b3d33689e
Add Serial4 & Serial5 for K64 & K66
vor 8 Jahren
PaulStoffregen
6040145aac
More K66 overclocking options
vor 8 Jahren