teensy-cores

Commit graph

Autor	SHA1	Nachricht	Datum
Defragster	2facd223a1	#ifdef version - same code - no runtime check - T_3.6 >120000000 specific code that works https://forum.pjrc.com/threads/34808-K66-Beta-Test?p=116690&viewfull=1#post116690	vor 8 Jahren
Defragster	fc8222a8c3	Drop HSRUN across Ser# read with interrupts off Results in valid serial # presented to USB host when T_3.6 is in HSRUN mode.	vor 8 Jahren
Kurt Eckhardt	426a53c281	Fix Serial6 for Teensy 3.5 Needed to add new Define for clock gate Plus defines to use the new clock gate, plus correct case name for the serial6 isr to match what is in system isr table	vor 8 Jahren
PaulStoffregen	0ed6ba9a96	Fix USB serial number on K64 & K66	vor 8 Jahren
PaulStoffregen	ce27c4c50b	Add misc SDHC register bitfield defs	vor 8 Jahren
Defragster	00438a66ed	When concat is same string to string, use memcpy, allows for re-alloc to move string on growth https://forum.pjrc.com/threads/35688-Something-wrong-with-Adding-a-String-to-itself!?p=111109#post111109	vor 8 Jahren
Kurt Eckhardt	899cbecc02	Enable Uart 2 stop bit capabilities The T-LC and the new beta boards T3.6 and soon T3.5 hardware uarts have ability to turn on 2 stop bits. So enabled on these boards.	vor 8 Jahren
Kurt Eckhardt	a8c467f5e6	Fix Compile error for Teensy LC	vor 8 Jahren
Kurt Eckhardt	1067caf0ba	Beta Board names Change	vor 8 Jahren
Kurt Eckhardt	78189d6f15	Serial4.setTX - used wrong SIm_SCGC4 test Was using UART2, should be UART3	vor 8 Jahren
Kurt Eckhardt	da4b27c0db	T3.2 Serial2.end - handle alternate pins On T3.2 if you do something like: Serial2.setTX(31); Serial2.setRX(26); Serial2.begin(.9600); ... Serial2.end(); It will on the end call will always reconfigure pins 9 and 10 to be digital pins MUX = 1	vor 8 Jahren
PaulStoffregen	4d925d3a1c	Improve async sample rate feedback, add optional mac limit	vor 8 Jahren
Kurt Eckhardt	44027e2115	Add serialEvent6 to yield	vor 8 Jahren
PaulStoffregen	12421ba5a9	Add new Arduino pin defines	vor 8 Jahren
PaulStoffregen	731d9123f6	Keycode for Non-US backslash (thanks parsnip42) fixes #159	vor 8 Jahren
PaulStoffregen	d46a56a811	Fix USB audio feedback endpoint attributes	vor 8 Jahren
Kurt Eckhardt	89d92016c1	Pass at serial6_format	vor 8 Jahren
Kurt Eckhardt	d2f9acc78c	Try using BITBAND to turn on/off TIE and TCIE Make update of these flags be hopefully interrupt safe	vor 8 Jahren
Kurt Eckhardt	7352ea7791	Add Serial6 - T3.4 Uart5, T3.5 LPUart0 This is a WIP, But I have now been able to create Serial6 on T3.4 beta, and so far have tested Send/Receive basic stuff at 115200 and have tried at several CPU speeds in MHZ (192, 216, 180, 120, 96)	vor 8 Jahren
Kurt Eckhardt	c79a667e31	T T3.4 T3.5 SPI2 support	vor 8 Jahren
PaulStoffregen	50c805926f	Improve flash security documentation	vor 8 Jahren
sumotoy	892d07181d	missed pin 26	vor 8 Jahren
duff2013	c5c14007bb	trigger mode enable cmp register def	vor 8 Jahren
PaulStoffregen	88dce04d81	Add extra K66 pin defines	vor 8 Jahren
Kurt Eckhardt	1bb20b3b61	Serial2.setTx and Serial2.setRX should check Uart1 These two functions were checking (SIM_SCGC4 & SIM_SCGC4_UART2) and should be testing (SIM_SCGC4 & SIM_SCGC4_UART1)	vor 8 Jahren
PaulStoffregen	bb95e546fe	Increase startup delay slightly	vor 8 Jahren
PaulStoffregen	aeff63583d	Document flash security locking technique	vor 8 Jahren
PaulStoffregen	39d9fdc386	Fix compiler warnings with USB audio	vor 8 Jahren
Frank	61dce339b0	fix SDHC_XFERTYP_RSPTYP	vor 8 Jahren
PaulStoffregen	de0677a6e0	Enable VREF on K66 fixes #145	vor 8 Jahren
Kurt Eckhardt	eb97df1ffe	PulseIn on LC issue PulseIn may fail on LC as it is using *reg to test the value for on or off, but on LC register is a bitmask associated with several IO pins. So split off for LC to use the MASK value for the pin to test high and low. Warning did not update timings for this, which may be necessary as adds an & in the loop. However when I tried TLC for 5000us timeout, it timed out with 5138us, if I decremented the PULSEIN_LOOPS_PER_USEC by one, then it timed out at 4398... This was at 49mhz.	vor 8 Jahren
PaulStoffregen	4b7151d0e0	Fix compiler warning with Keyboard.set_modifier	vor 8 Jahren
Kurt Eckhardt	57be6914a5	Serial1 - New pins work with begin	vor 8 Jahren
Kurt Eckhardt	94ce960eef	SPCR1 operations now defined	vor 8 Jahren
PaulStoffregen	31c9626281	Fix some USBHS register bit names	vor 8 Jahren
duff2013	87274341bd	Set FlexBus Clock Divider to correct value for 16, 8, 4 MHz	vor 8 Jahren
duff2013	484098c794	update LLWU reg.	vor 8 Jahren
PaulStoffregen	9f1f15a53e	Add SDHC register bit defs	vor 8 Jahren
PaulStoffregen	0e35a31068	Add ethernet register bit defs	vor 8 Jahren
PaulStoffregen	fdf57f66c6	Add USBHS register bit defs	vor 8 Jahren
Kurt Eckhardt	1c2f6dca35	Optional: Add SPI2... Just in case the extra pads are added to bottom of 3.4/3.5 board, define is in place...	vor 8 Jahren
Kurt Eckhardt	305fb4da93	SPI1 on T3.4/3.5 - Add SPCR1	vor 8 Jahren
Kurt Eckhardt	91f8f30c04	Add SPI1 to kinetis.h for T3.4 and T3.5 Added define for SPI1 registers	vor 8 Jahren
Frank	c0921e7b0d	add additonal F_TIMER (FTM_MOD) ...were missing :)	vor 8 Jahren
PaulStoffregen	d79723c252	Easier F_BUS overclocking	vor 8 Jahren
PaulStoffregen	be42e0574e	Fix DMA on K66	vor 8 Jahren
Frank Bösing	dfd60bee72	add missing F_BUS to SPIFIFO	vor 8 Jahren
Frank Bösing	8752969dbb	Add missing F_BUS	vor 8 Jahren
PaulStoffregen	e2e07e5394	Fix DMAMUX for K66	vor 8 Jahren
PaulStoffregen	ddb7fb0267	Add I2C clock divider names	vor 8 Jahren

1 2 3 4 5 ...

414 Commits (459ac4cfc7838cceef0a1dc1730365fb497b20d4)