teensy-cores

Grafico dei commit

Autore	SHA1	Messaggio	Data
PaulStoffregen	fa1f446555	Add link to info about usb_tx_packet_count() function & USB packet latency	4 anni fa
Kurt Eckhardt	d28e889454	T3 - Bug in PINC Reading wrong register for one bit...	5 anni fa
PaulStoffregen	73ea157600	Add comment with link to PORT_PCR_ISF polling example	5 anni fa
PaulStoffregen	5e3ce5a4ca	Require the vector table on Teensy 3.x, even for programs referencing nothing	5 anni fa
PaulStoffregen	571493c10e	Allow huge serial buffers on Teensy 3.x	5 anni fa
PaulStoffregen	63aba265db	Fix digitalPinHasPWM on T3.6 & analogInputToDigitalPin on T3.5 & T3.6	5 anni fa
Mikolaj	d7a15b0210	Added the ability to parametrize Teensy 3 core USB init delays through compiler defines (TEENSY_INIT_USB_DELAY_BEFORE, TEENSY_INIT_USB_DELAY_AFTER). When defines are not present, default values are used, depending on teensy version.	5 anni fa
PaulStoffregen	019c928ac4	Add empty cache functions, for T4 backwards compatibility	5 anni fa
PaulStoffregen	1b1f95315f	Improve startup behavior on Teensy 3.6 with external slowly rising power	5 anni fa
PaulStoffregen	c4fe5e9303	Fix compiler warning	5 anni fa
Frank	1badfa2ccd	add nullptr check	5 anni fa
Frank	afefd37bc7	Make sure DONE Bit is cleared.	5 anni fa
Frank	1d59fe6df4	Update Stream.cpp	5 anni fa
Frank	be0b44bceb	Update Stream.cpp	5 anni fa
Frank	07df732e2b	Update Stream.cpp	5 anni fa
Frank	8d01550ff3	Update Stream.cpp	5 anni fa
Pete	7a309dfb89	Update AudioStream.cpp	5 anni fa
PaulStoffregen	238b102ac4	Add model identification to linker scripts for all Teensy 3.x boards	5 anni fa
PaulStoffregen	44359dcf6b	Add comments about EEPROM size config	5 anni fa
PaulStoffregen	556b4b4c5d	Fix asm in delayMicroseconds on Teensy LC (Frank B) fixes #288	5 anni fa
dav1901	20b527d01a	Fix typo	6 anni fa
dav1901	59402d1e7e	Fix typo	6 anni fa
Frank Bösing	b7b51f0a91	Revert "Revert "F_BUS 128MHz for SPIFIFO.h"" This reverts commit `5dade02144`.	6 anni fa
Frank Bösing	5dade02144	Revert "F_BUS 128MHz for SPIFIFO.h" This reverts commit `c2e28e0a27`.	6 anni fa
Frank	c2e28e0a27	F_BUS 128MHz for SPIFIFO.h	6 anni fa
Frank Bösing	7d43e33fbe	cosmetic changes	6 anni fa
Frank Bösing	f6d7053eb5	F_BUS 128MHZ for pins_teensy.c	6 anni fa
Frank Bösing	72d7b11fb6	F_BUS 128MHz analog.c	6 anni fa
Frank Bösing	11bd76352d	FCPU 256MHz	6 anni fa
PaulStoffregen	c425ecbd0a	Fix serial end() when errors are received but final interrupt never runs	6 anni fa
PaulStoffregen	0444986638	Update makefile	6 anni fa
PaulStoffregen	cb6289fd85	Avoid USB bug related with O2 optimize	6 anni fa
PaulStoffregen	92533cb5ce	Remove ancient BYTE define (causes more trouble than it's worth)	6 anni fa
PaulStoffregen	87f6186546	USB MIDI - don't hog transmit buffers	6 anni fa
PaulStoffregen	831d3b40b1	Fix typo	6 anni fa
PaulStoffregen	a95bccf37f	Update sample Makefile for next release number	6 anni fa
PaulStoffregen	e1676586f1	Support generic UDP beginMulticast()	6 anni fa
Jon Eyolfson	41705a8324	Change `getIsrTable` from `inline` to `static inline` Newer versions of GCC (8.1.0 in my case) default to `-std=gnu11` (I believe), which expects `inline` to have an external definition. The `Makefile` (I ran it with `NO_ARDUINO` set) doesn't specify any C_FLAGS. Therefore gcc uses the new default value, instead of the old C99 standard. In this case you'll get a linker error for `getIsrTable` not being defined. This change allows the code to successfully compile with new versions of gcc. This change works with the old default std of gcc. For much older versions of gcc it might be better to explicitly set the `std` in `CFLAGS` within the `Makefile`.	6 anni fa
PaulStoffregen	fc79132670	Fix Keyboard.print('#') on UK & Irish keyboard layouts	6 anni fa
Jim Thoenen	0126257caa	Only enable C++ set_media API if KEYMEDIA_INTERFACE is defined.	6 anni fa
PaulStoffregen	9b5d9f9632	Use same USB PID for flight sim controls	6 anni fa
PaulStoffregen	6a30e80658	Add bcdDevice info to help teensy_ports identify models	6 anni fa
PaulStoffregen	86f64c1a9f	Fix Teensy 3.5 stack alignment (thanks Frank)	6 anni fa
PaulStoffregen	27cdeb1cb9	Teensy LC does not support saturate instruction	6 anni fa
shkshk90	edc3f0c12b	Add saturate instruction Use ARM's unsigned saturate instruction to limit the value, to be written to DAC, to 11 bits (range 0 to 4095).	6 anni fa
shkshk90	b90f36c8b7	Update analog.c	6 anni fa
PaulStoffregen	6d441162e6	Fix FTM_CONF register bitfield defs	6 anni fa
PaulStoffregen	5fdbe446bc	Fix DMAChannel transferSize() on Teensy LC fixes #266	6 anni fa
PaulStoffregen	abe5ca8072	Include <Arduino.h> first, for precompile header rebuild all speedup	6 anni fa
PaulStoffregen	148efde0f2	Enable use of 256K RAM on Teensy 3.5	6 anni fa

1 2 3 4 5 ...

680 Commit (add1b5ab6c97a3c080dd84a19199e8f9c2e0842d)