PaulStoffregen
fa1f446555
Add link to info about usb_tx_packet_count() function & USB packet latency
4 yıl önce
Kurt Eckhardt
d28e889454
T3 - Bug in PINC
Reading wrong register for one bit...
5 yıl önce
PaulStoffregen
73ea157600
Add comment with link to PORT_PCR_ISF polling example
5 yıl önce
PaulStoffregen
5e3ce5a4ca
Require the vector table on Teensy 3.x, even for programs referencing nothing
5 yıl önce
PaulStoffregen
571493c10e
Allow huge serial buffers on Teensy 3.x
5 yıl önce
PaulStoffregen
63aba265db
Fix digitalPinHasPWM on T3.6 & analogInputToDigitalPin on T3.5 & T3.6
5 yıl önce
Mikolaj
d7a15b0210
Added the ability to parametrize Teensy 3 core USB init delays through compiler defines (TEENSY_INIT_USB_DELAY_BEFORE, TEENSY_INIT_USB_DELAY_AFTER). When defines are not present, default values are used, depending on teensy version.
5 yıl önce
PaulStoffregen
019c928ac4
Add empty cache functions, for T4 backwards compatibility
5 yıl önce
PaulStoffregen
1b1f95315f
Improve startup behavior on Teensy 3.6 with external slowly rising power
5 yıl önce
PaulStoffregen
c4fe5e9303
Fix compiler warning
5 yıl önce
Frank
1badfa2ccd
add nullptr check
5 yıl önce
Frank
afefd37bc7
Make sure DONE Bit is cleared.
5 yıl önce
Frank
1d59fe6df4
Update Stream.cpp
5 yıl önce
Frank
be0b44bceb
Update Stream.cpp
5 yıl önce
Frank
07df732e2b
Update Stream.cpp
5 yıl önce
Frank
8d01550ff3
Update Stream.cpp
5 yıl önce
Pete
7a309dfb89
Update AudioStream.cpp
5 yıl önce
PaulStoffregen
238b102ac4
Add model identification to linker scripts for all Teensy 3.x boards
5 yıl önce
PaulStoffregen
44359dcf6b
Add comments about EEPROM size config
5 yıl önce
PaulStoffregen
556b4b4c5d
Fix asm in delayMicroseconds on Teensy LC (Frank B)
fixes #288
5 yıl önce
dav1901
20b527d01a
Fix typo
6 yıl önce
dav1901
59402d1e7e
Fix typo
6 yıl önce
Frank Bösing
b7b51f0a91
Revert "Revert "F_BUS 128MHz for SPIFIFO.h""
This reverts commit 5dade02144
.
6 yıl önce
Frank Bösing
5dade02144
Revert "F_BUS 128MHz for SPIFIFO.h"
This reverts commit c2e28e0a27
.
6 yıl önce
Frank
c2e28e0a27
F_BUS 128MHz for SPIFIFO.h
6 yıl önce
Frank Bösing
7d43e33fbe
cosmetic changes
6 yıl önce
Frank Bösing
f6d7053eb5
F_BUS 128MHZ for pins_teensy.c
6 yıl önce
Frank Bösing
72d7b11fb6
F_BUS 128MHz analog.c
6 yıl önce
Frank Bösing
11bd76352d
FCPU 256MHz
6 yıl önce
PaulStoffregen
c425ecbd0a
Fix serial end() when errors are received but final interrupt never runs
6 yıl önce
PaulStoffregen
0444986638
Update makefile
6 yıl önce
PaulStoffregen
cb6289fd85
Avoid USB bug related with O2 optimize
6 yıl önce
PaulStoffregen
92533cb5ce
Remove ancient BYTE define (causes more trouble than it's worth)
6 yıl önce
PaulStoffregen
87f6186546
USB MIDI - don't hog transmit buffers
6 yıl önce
PaulStoffregen
831d3b40b1
Fix typo
6 yıl önce
PaulStoffregen
a95bccf37f
Update sample Makefile for next release number
6 yıl önce
PaulStoffregen
e1676586f1
Support generic UDP beginMulticast()
6 yıl önce
Jon Eyolfson
41705a8324
Change `getIsrTable` from `inline` to `static inline`
Newer versions of GCC (8.1.0 in my case) default to `-std=gnu11` (I believe), which expects `inline` to have an external definition. The `Makefile` (I ran it with `NO_ARDUINO` set) doesn't specify any C_FLAGS. Therefore gcc uses the new default value, instead of the old C99 standard. In this case you'll get a linker error for `getIsrTable` not being defined. This change allows the code to successfully compile with new versions of gcc. This change works with the old default std of gcc. For much older versions of gcc it might be better to explicitly set the `std` in `CFLAGS` within the `Makefile`.
6 yıl önce
PaulStoffregen
fc79132670
Fix Keyboard.print('#') on UK & Irish keyboard layouts
6 yıl önce
Jim Thoenen
0126257caa
Only enable C++ set_media API if KEYMEDIA_INTERFACE is defined.
6 yıl önce
PaulStoffregen
9b5d9f9632
Use same USB PID for flight sim controls
6 yıl önce
PaulStoffregen
6a30e80658
Add bcdDevice info to help teensy_ports identify models
6 yıl önce
PaulStoffregen
86f64c1a9f
Fix Teensy 3.5 stack alignment (thanks Frank)
6 yıl önce
PaulStoffregen
27cdeb1cb9
Teensy LC does not support saturate instruction
6 yıl önce
shkshk90
edc3f0c12b
Add saturate instruction
Use ARM's unsigned saturate instruction to limit the value, to be written to DAC, to 11 bits (range 0 to 4095).
6 yıl önce
shkshk90
b90f36c8b7
Update analog.c
6 yıl önce
PaulStoffregen
6d441162e6
Fix FTM_CONF register bitfield defs
6 yıl önce
PaulStoffregen
5fdbe446bc
Fix DMAChannel transferSize() on Teensy LC
fixes #266
6 yıl önce
PaulStoffregen
abe5ca8072
Include <Arduino.h> first, for precompile header rebuild all speedup
6 yıl önce
PaulStoffregen
148efde0f2
Enable use of 256K RAM on Teensy 3.5
6 yıl önce