PaulStoffregen
2c726eae11
RTS/CTS support for Serial1 on Teensy LC & 3.x (experimental)
vor 9 Jahren
Frank
9074be84f0
The buffer for digits after the decimal-point is on the stack, so i think it's not a problem to make it slightly bigger.
https://forum.pjrc.com/threads/31233-float-and-double?p=86860&viewfull=1#post86860
vor 9 Jahren
PaulStoffregen
7a6898b59d
Add bool operator to HardwareSerial
vor 9 Jahren
Defragster
9d0e0143bd
Fix for dtostrf on floats under zero
Per forum
https://forum.pjrc.com/threads/1227-Teensy3-alternative-for-dtostrf()?p=86671&viewfull=1#post86671
vor 9 Jahren
PaulStoffregen
b9044c4289
Add doughboy's alternate serial1 code (for reference only, not used yet)
vor 9 Jahren
PaulStoffregen
c6e6060c48
whitespace reformat in serial code
vor 9 Jahren
PaulStoffregen
7e46ee291b
Add 2 channel enable flags for I2S
vor 9 Jahren
Thierry Frenkel
0e397cc970
Allow low frequencies for analogWriteFrequency
In case the desired frequency is too low to be obtained with F_TIMER
because prescale and mod were at their limits, switch automatically to
the alternative clock source (31250Hz) before determining prescale and
mod with the same algorithm as before.
vor 9 Jahren
PaulStoffregen
c4289ff4c5
Improve tone(), always complete current cycle before change to new frequency
vor 9 Jahren
PaulStoffregen
d1a6e77ad9
Begin work on MTP Disk
vor 9 Jahren
PaulStoffregen
d5a1b9745b
Add __bss_start__ and __bss_end__, improves compatibility with other software
vor 9 Jahren
PaulStoffregen
aa212b61e0
Defs for MK66FX1M0
vor 9 Jahren
Frank
628addbd49
See Reference Manual Page 1350
50.6.2 SCAN Control register
Bug found by Chronologist, https://forum.pjrc.com/threads/29624-Using-TSI-for-capacitance-measurement
vor 9 Jahren
PaulStoffregen
345b03b31f
Someday Teensy-LC will have audio, but only 22 kHz sample rate
vor 9 Jahren
PaulStoffregen
c2f550d378
Add serial flow control C functions
https://forum.pjrc.com/threads/29446-Teensy-Hardware-Flow-Control-RTS-CTS?p=80425#post80425
vor 9 Jahren
PaulStoffregen
7dd78d023a
Reduce flash clock in 168 MHz overclock mode
vor 9 Jahren
PaulStoffregen
f2948bd195
Add UART register bit definitions
vor 9 Jahren
PaulStoffregen
05fa587cc4
Add more register defs
vor 9 Jahren
PaulStoffregen
1e49af2dd2
Add register definitions
vor 9 Jahren
Jorg Bliesener
fe29d9e740
Bugfixes and comments
vor 9 Jahren
Jorg Bliesener
32d841e418
usb_flightsim changes for XPlaneRefs with names >58 chars
vor 9 Jahren
Karg
09f8b04899
Added full support for Midi Time Codes and Real Time messages
can now receive and send Midi Time Codes
and send Real Time messages
vor 9 Jahren
PaulStoffregen
4cf71a44c8
Use mlu's further optimization of divmod10
https://forum.pjrc.com/threads/28932-LC-is-10-9-times-slower-than-T3-1?p=76072&viewfull=1#post76072
vor 9 Jahren
PaulStoffregen
71ba6b2adb
Speedup print() on Teensy-LC
vor 9 Jahren
Jorg Neves Bliesener
f2ed8c5dc3
Fix packet stuffing in usb_flightsim_flush_callback
vor 9 Jahren
PaulStoffregen
37e24b0107
define SERIAL_PORT_MONITOR to Serial1 when USB is disabled
vor 9 Jahren
PaulStoffregen
0bdac50dcb
Add PDB channel 1 register definitions
https://forum.pjrc.com/threads/25153-PDB0CH1-register-definitions
vor 9 Jahren
PaulStoffregen
ca6b6fd9b0
opps, fix delayMicroseconds on Teensy-LC at 24 MHz for realz
vor 9 Jahren
PaulStoffregen
00d45085e6
fix delayMicroseconds on Teensy-LC at 24 MHz
https://forum.pjrc.com/threads/28932-LC-is-10-9-times-slower-than-T3-1?p=75775&viewfull=1#post75775
vor 9 Jahren
PaulStoffregen
61b29fa289
Optimize delayMicroseconds() on Teensy-LC
https://forum.pjrc.com/threads/28932-LC-is-10-9-times-slower-than-T3-1
vor 9 Jahren
kbob
c1cedab25a
Defined FTM_SC_DMA on KINETIS-L chips.
vor 9 Jahren
kbob
3676d1621f
Corrected conversion from words to bytes in transferCount().
vor 9 Jahren
PaulStoffregen
2ee5a630c8
Add license headers to AVR emulation header files
vor 9 Jahren
PaulStoffregen
66b28afda0
Fix initial delay bug on Teensy-LC
https://forum.pjrc.com/threads/28325-Teensy-LC-and-delay
vor 9 Jahren
FrankBoesing
7d3da62a48
strlen is already in string.h
or, alternativly one could write size_t strlen(const char *s) {return __builtin_strlen(s);} to use the gcc-builtin function.
I think, both are faster than the bytewise search.
vor 9 Jahren
PaulStoffregen
28a3eb04f0
analogWriteFrequency uses float for frequency
vor 9 Jahren
FrankBoesing
3bc1d5f9e8
millis()
systick_millis_count is already volatile, doing it twice is not needed.
vor 9 Jahren
PaulStoffregen
8cd4703817
Use gcc memory barriers in IRQ enable/disable
vor 9 Jahren
PaulStoffregen
a8818e0058
Default Systick to priority 32 (don't hog highest priority)
vor 9 Jahren
PaulStoffregen
0dcc3a1f5e
Fix NVIC_TRIGGER_IRQ on Teensy-LC
vor 9 Jahren
PaulStoffregen
8545ba7ffb
Fix USB flightsim on Teensy-LC
vor 9 Jahren
PaulStoffregen
3bc1d7c08b
Fix E2END
vor 9 Jahren
PaulStoffregen
7a750fe78e
Improve avr eeprom emulation, E2END
vor 9 Jahren
PaulStoffregen
c4054203a7
Fix more compiler warnings
vor 9 Jahren
PaulStoffregen
809219a11a
Fix compiler warnings
vor 9 Jahren
crteensy
0064485e41
Update kinetis.h
- Added bit definitions for the PIT
- limited Teensy LC to only two PITs
- added PIT_LTMR64 for Teensy LC
vor 9 Jahren
FrankBoesing
61ba19bd11
CS initialization corrected
vor 9 Jahren
PaulStoffregen
6ed0c5f01f
Fix Hardware Serial transmitterEnable() on Teensy-LC
vor 9 Jahren
PaulStoffregen
5c9ccd8412
Fix 9 bit transmit mode on Serial3
vor 9 Jahren
PaulStoffregen
eb3e46ac85
Improve printf_P() compatibility on Teensy 3.x
vor 9 Jahren