Raw access to SD and SDHC flash memory cards via SPI protocol. More...

#include <SdSpiCard.h>

Inheritance diagram for SdSpiCard:

Public Member Functions
bool	begin (SdSpiDriver *spi, uint8_t csPin, SPISettings spiSettings)

uint32_t	cardSize ()

bool	erase (uint32_t firstBlock, uint32_t lastBlock)

bool	eraseSingleBlockEnable ()

void	error (uint8_t code)

int	errorCode () const

int	errorData () const

bool	isBusy ()

bool	readBlock (uint32_t lba, uint8_t *dst)

bool	readBlocks (uint32_t lba, uint8_t *dst, size_t nb)

bool	readCID (cid_t *cid)

bool	readCSD (csd_t *csd)

bool	readData (uint8_t *dst)

bool	readOCR (uint32_t *ocr)

bool	readStart (uint32_t blockNumber)

bool	readStatus (uint8_t *status)

bool	readStop ()

	SdSpiCard ()

void	spiStart ()

void	spiStop ()

bool	syncBlocks ()

int	type () const

bool	writeBlock (uint32_t lba, const uint8_t *src)

bool	writeBlocks (uint32_t lba, const uint8_t *src, size_t nb)

bool	writeData (const uint8_t *src)

bool	writeStart (uint32_t blockNumber)

bool	writeStart (uint32_t blockNumber, uint32_t eraseCount)

bool	writeStop ()

Detailed Description

Raw access to SD and SDHC flash memory cards via SPI protocol.

Constructor & Destructor Documentation

SdSpiCard::SdSpiCard ( )

inline

Construct an instance of SdSpiCard.

Member Function Documentation

bool SdSpiCard::begin	(	SdSpiDriver *	spi,
		uint8_t	csPin,
		SPISettings	spiSettings
	)

Initialize the SD card.

Parameters

[in]	spi	SPI driver for card.
[in]	csPin	card chip select pin.
[in]	spiSettings	SPI speed, mode, and bit order.

Returns: true for success else false.

uint32_t SdSpiCard::cardSize ( )

Determine the size of an SD flash memory card.

Returns: The number of 512 byte data blocks in the card or zero if an error occurs.

bool SdSpiCard::erase	(	uint32_t	firstBlock,
		uint32_t	lastBlock
	)

Erase a range of blocks.

Parameters

[in]	firstBlock	The address of the first block in the range.
[in]	lastBlock	The address of the last block in the range.

Note: This function requests the SD card to do a flash erase for a range of blocks. The data on the card after an erase operation is either 0 or 1, depends on the card vendor. The card must support single block erase.

Returns: The value true is returned for success and the value false is returned for failure.

bool SdSpiCard::eraseSingleBlockEnable ( )

Determine if card supports single block erase.

Returns: true is returned if single block erase is supported. false is returned if single block erase is not supported.

void SdSpiCard::error ( uint8_t code )

inline

Set SD error code.

Parameters

[in] code value for error code.

int SdSpiCard::errorCode ( ) const

inline

Returns: code for the last error. See SdInfo.h for a list of error codes.

int SdSpiCard::errorData ( ) const

inline

Returns: error data for last error.

bool SdSpiCard::isBusy ( )

Check for busy. MISO low indicates the card is busy.

Returns: true if busy else false.

bool SdSpiCard::readBlock	(	uint32_t	lba,
		uint8_t *	dst
	)

Read a 512 byte block from an SD card.

Parameters

[in]	lba	Logical block to be read.
[out]	dst	Pointer to the location that will receive the data.

Returns: The value true is returned for success and the value false is returned for failure.

bool SdSpiCard::readBlocks	(	uint32_t	lba,
		uint8_t *	dst,
		size_t	nb
	)

Read multiple 512 byte blocks from an SD card.

Parameters

[in]	lba	Logical block to be read.
[in]	nb	Number of blocks to be read.
[out]	dst	Pointer to the location that will receive the data.

Returns: The value true is returned for success and the value false is returned for failure.

bool SdSpiCard::readCID ( cid_t * cid )

inline

Read a card's CID register. The CID contains card identification information such as Manufacturer ID, Product name, Product serial number and Manufacturing date.

Parameters

[out] cid pointer to area for returned data.

Returns: true for success or false for failure.

bool SdSpiCard::readCSD ( csd_t * csd )

inline

Read a card's CSD register. The CSD contains Card-Specific Data that provides information regarding access to the card's contents.

Parameters

[out] csd pointer to area for returned data.

Returns: true for success or false for failure.

bool SdSpiCard::readData ( uint8_t * dst )

Read one data block in a multiple block read sequence

Parameters

[out] dst Pointer to the location for the data to be read.

Returns: The value true is returned for success and the value false is returned for failure.

bool SdSpiCard::readOCR ( uint32_t * ocr )

Read OCR register.

Parameters

[out] ocr Value of OCR register.

Returns: true for success else false.

bool SdSpiCard::readStart ( uint32_t blockNumber )

Start a read multiple blocks sequence.

Parameters

[in] blockNumber Address of first block in sequence.

Note: This function is used with readData() and readStop() for optimized multiple block reads. SPI chipSelect must be low for the entire sequence.

Returns: The value true is returned for success and the value false is returned for failure.

bool SdSpiCard::readStatus ( uint8_t * status )

Return the 64 byte card status

Parameters

[out] status location for 64 status bytes.

Returns: The value true is returned for success and the value false is returned for failure.

bool SdSpiCard::readStop ( )

End a read multiple blocks sequence.

Returns: The value true is returned for success and the value false is returned for failure.

void SdSpiCard::spiStart ( )

Set CS low and activate the card.

void SdSpiCard::spiStop ( )

Set CS high and deactivate the card.

bool SdSpiCard::syncBlocks ( )

inline

Returns: success if sync successful. Not for user apps.

int SdSpiCard::type ( ) const

inline

Return the card type: SD V1, SD V2 or SDHC

Returns: 0 - SD V1, 1 - SD V2, or 3 - SDHC.

bool SdSpiCard::writeBlock	(	uint32_t	lba,
		const uint8_t *	src
	)

Writes a 512 byte block to an SD card.

Parameters

[in]	lba	Logical block to be written.
[in]	src	Pointer to the location of the data to be written.

Returns: The value true is returned for success and the value false is returned for failure.

bool SdSpiCard::writeBlocks	(	uint32_t	lba,
		const uint8_t *	src,
		size_t	nb
	)

Write multiple 512 byte blocks to an SD card.

Parameters

[in]	lba	Logical block to be written.
[in]	nb	Number of blocks to be written.
[in]	src	Pointer to the location of the data to be written.

Returns: The value true is returned for success and the value false is returned for failure.

bool SdSpiCard::writeData ( const uint8_t * src )

Write one data block in a multiple block write sequence.

Parameters

[in] src Pointer to the location of the data to be written.

Returns: The value true is returned for success and the value false is returned for failure.

bool SdSpiCard::writeStart ( uint32_t blockNumber )

Start a write multiple blocks sequence.

Parameters

[in] blockNumber Address of first block in sequence.

Note: This function is used with writeData() and writeStop() for optimized multiple block writes.

Returns: The value true is returned for success and the value false is returned for failure.

bool SdSpiCard::writeStart	(	uint32_t	blockNumber,
		uint32_t	eraseCount
	)

Start a write multiple blocks sequence with pre-erase.

Parameters

[in]	blockNumber	Address of first block in sequence.
[in]	eraseCount	The number of blocks to be pre-erased.

Note: This function is used with writeData() and writeStop() for optimized multiple block writes.

Returns: The value true is returned for success and the value false is returned for failure.

bool SdSpiCard::writeStop ( )

End a write multiple blocks sequence.

Returns: The value true is returned for success and the value false is returned for failure.

The documentation for this class was generated from the following files:

Arduino/libraries/SdFat/src/SdCard/SdSpiCard.h
Arduino/libraries/SdFat/src/SdCard/SdSpiCard.cpp

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation