teensy-wire

Commit Graph

작성자	SHA1	메시지	날짜
PaulStoffregen	a9457dac39	Add Si7210 to Scanner example fixes #22	4 년 전
PaulStoffregen	7c1ff62346	Add MS8607 to Scanner example	5 년 전
Paul Stoffregen	33d7d7e48c	Merge pull request #20 from KurtE/QWIIC_KEYPAD Qwiic keypad	5 년 전
Kurt Eckhardt	8592d6d3ca	T4 Wire defines for IIMPLEMENT... Added defines like we have for T3.x/LC That it implements Wire, Wire1, Wire2, So that programs that care can build using without having to special case T4	5 년 전
Kurt Eckhardt	69614902c6	Add Qwiic Keypad to scanner Note: I added it's primary address 0x4B as well as it's one alternate 0x4a by Solder jumper... Again not sure as for QWiic_Button we (you) added the 0x6f which is default one, but it actually has 4 solder jumpers which gives it an address range of 0x60-0x6f	5 년 전
PaulStoffregen	6ec2a5a10a	Add Qwiic Button to Scanner example	5 년 전
PaulStoffregen	69186a2759	Add FRAM to Scanner example	5 년 전
PaulStoffregen	956a5c418a	Improve FIFO handling for Teensy 4.0	5 년 전
PaulStoffregen	c93e869a96	Workaround for BNO080 errors on Teensy 4.0	5 년 전
PaulStoffregen	f72e03f34a	Add BNO080 to list of known chips in Scanner example	5 년 전
PaulStoffregen	5f58cb703b	Adjust pin config on Teensy 4.0 https://forum.pjrc.com/threads/58654-Teensyduino-1-49-Beta-2?p=223880&viewfull=1#post223880	5 년 전
PaulStoffregen	f52060abe3	Use open drain pin config	5 년 전
PaulStoffregen	6c9fec1699	Only clear FIFOs when bus is idle	5 년 전
Paul Stoffregen	3b1808072f	Merge pull request #16 from KurtE/T4_BNO055_HANG T4 - Clear out TX FIFO in RequestFrom and endTransmission	5 년 전
PaulStoffregen	e61b4d91dc	Add more known chips to Scanner example	5 년 전
Kurt Eckhardt	08d870fc13	T4 - Clear out TX FIFO in RequestFrom and endTransmission This appears to resolve the hang in the BNO055 test cases. Basically I detect if the FIFO queue is not empty when you start these two functions and clear it out if it does. Also NEED to then clear out the FEF status bit after you clear it. You might want to see if there is a better way. But @mjs513 said it also resolved his issue with MPL3115	5 년 전
Paul Stoffregen	68471bc63c	Merge pull request #14 from KurtE/T4_setSCL_setSDA T4 Wire1 has alternate pins - setSCL setSDA implemented	5 년 전
Kurt Eckhardt	0fe5f18d4b	T4 Wire1 has alternate pins - setSCL setSDA implemented T4 has alternate wire pins on the SDCard pins, which may come in handy in some cases. So converted the pin initialization stuff to be close to what I did in hardwareSerial, and created a pin definition structure with pin numbers, and then mapped those pins to underlying IMXRT data... Implemented setSCL and setSDA. Tested with modified version of Scanner.ino, and found prop shield devices on Wire, Wire1, Wire2 and then Wire1 on alternate pins...	5 년 전
PaulStoffregen	760fcb7197	Add Wire.requestFrom() with 5 params	5 년 전
Paul Stoffregen	30d884ddea	Merge pull request #13 from arjhun/patch-1 Added APDS-9960 lux sensor at 0x39	5 년 전
arjhun	9673e38f55	Added APDS-9960 lux sensor at 0x39 Used in the sparkfun apds-9960 lux rgb proximity sensor boards and clones.	5 년 전
PaulStoffregen	1309ff3eb8	Rename AdafruitLED to HT16K33 in Scanner example	5 년 전
PaulStoffregen	780f56789f	Add MAX11612-MAX11617 to Scanner example	5 년 전
PaulStoffregen	4b47980e8d	Add SHT3X to list of known chip in Scanner example fixes #12	6 년 전
PaulStoffregen	c525e05e39	Improve check for Teensy 3.x boards	6 년 전
PaulStoffregen	9740070fc7	Support 400 kHz & 1 MHz speeds	6 년 전
PaulStoffregen	2fd0fcf8e2	Fix pin definitions	6 년 전
PaulStoffregen	1c236b07a4	endTransmission to only report success when all commands processed from fifo	6 년 전
PaulStoffregen	21ab71102b	Support Wire1 and Wire2	6 년 전
PaulStoffregen	bdbdb91154	Wire first working on IMXRT	6 년 전
PaulStoffregen	b757eb66ff	IMXRT - work in progress...	6 년 전
PaulStoffregen	877a05eb59	Include Arduino.h (for pre-compiled header speedup)	6 년 전
Paul Stoffregen	6e248dbb0f	Merge pull request #11 from FrankBoesing/F_BUS-128MHz F_BUS 128MHz	6 년 전
Frank	a3914c047d	Update WireKinetis.cpp	6 년 전
Frank	63fcd566c5	Update WireKinetis.h	6 년 전
PaulStoffregen	1e3551a03d	Force 9 clocks if waiting too long for bus idle	7 년 전
PaulStoffregen	49361a0c41	Fix typo in comments	7 년 전
PaulStoffregen	13fc9401d9	Fix for fastest optimization with CPU > 120 MHz	7 년 전
PaulStoffregen	53bad9ba2b	Add AVR twi_writeTo compatibility function	7 년 전
PaulStoffregen	06760becb5	Pins 58-59 (SD card pins) can be used for Wire1	7 년 전
Paul Stoffregen	bd5367b455	Merge pull request #7 from tni/master Make TwoWire constructor constexpr to allow constant initialization.	7 년 전
Tilo Nitzsche	e61db6b3ac	Make TwoWire constructor constexpr to allow constant initialization.	7 년 전
PaulStoffregen	db6faf319b	Allow read of partial requestFrom data	7 년 전
PaulStoffregen	c084466c3a	Don't get stuck in requestFrom if bus busy or long clock stretch	7 년 전
PaulStoffregen	45fd91166b	Don't default build Wire1 on LC & Wire3 on 3.6 (saves memory)	7 년 전
PaulStoffregen	f78061da69	Allow implementing Wire objects in sketch	7 년 전
PaulStoffregen	14617c9a30	Don't get stuck in endTransmission if bus busy or long clock stretch	7 년 전
PaulStoffregen	4e3317945a	All master/slave read & write examples Blink LED	7 년 전
PaulStoffregen	88ec5e7b57	Minor updates to examples	7 년 전
PaulStoffregen	39c840b8e9	Use pin change hack (only if needed) for Wire & Wire1	7 년 전

1 2

86 커밋 (a9457dac399bb66857c429ef34c37edde7ee9ca3) All Branches 검색

86 커밋 (a9457dac399bb66857c429ef34c37edde7ee9ca3)

All Branches