visus
/
toolchain-gcc-arm-embedded


			
							<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<!-- Copyright (C) 1988-2020 Free Software Foundation, Inc.

Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "Funding Free Software", the Front-Cover
Texts being (a) (see below), and with the Back-Cover Texts being (b)
(see below).  A copy of the license is included in the section entitled
"GNU Free Documentation License".

(a) The FSF's Front-Cover Text is:

A GNU Manual

(b) The FSF's Back-Cover Text is:

You have freedom to copy and modify this GNU Manual, like GNU
     software.  Copies published by the Free Software Foundation raise
     funds for GNU development. -->
<!-- Created by GNU Texinfo 6.5, http://www.gnu.org/software/texinfo/ -->
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>RL78 Options (Using the GNU Compiler Collection (GCC))</title>

<meta name="description" content="RL78 Options (Using the GNU Compiler Collection (GCC))">
<meta name="keywords" content="RL78 Options (Using the GNU Compiler Collection (GCC))">
<meta name="resource-type" content="document">
<meta name="distribution" content="global">
<meta name="Generator" content="makeinfo">
<link href="index.html#Top" rel="start" title="Top">
<link href="Option-Index.html#Option-Index" rel="index" title="Option Index">
<link href="index.html#SEC_Contents" rel="contents" title="Table of Contents">
<link href="Submodel-Options.html#Submodel-Options" rel="up" title="Submodel Options">
<link href="RS_002f6000-and-PowerPC-Options.html#RS_002f6000-and-PowerPC-Options" rel="next" title="RS/6000 and PowerPC Options">
<link href="RISC_002dV-Options.html#RISC_002dV-Options" rel="prev" title="RISC-V Options">
<style type="text/css">
<!--
a.summary-letter {text-decoration: none}
blockquote.indentedblock {margin-right: 0em}
blockquote.smallindentedblock {margin-right: 0em; font-size: smaller}
blockquote.smallquotation {font-size: smaller}
div.display {margin-left: 3.2em}
div.example {margin-left: 3.2em}
div.lisp {margin-left: 3.2em}
div.smalldisplay {margin-left: 3.2em}
div.smallexample {margin-left: 3.2em}
div.smalllisp {margin-left: 3.2em}
kbd {font-style: oblique}
pre.display {font-family: inherit}
pre.format {font-family: inherit}
pre.menu-comment {font-family: serif}
pre.menu-preformatted {font-family: serif}
pre.smalldisplay {font-family: inherit; font-size: smaller}
pre.smallexample {font-size: smaller}
pre.smallformat {font-family: inherit; font-size: smaller}
pre.smalllisp {font-size: smaller}
span.nolinebreak {white-space: nowrap}
span.roman {font-family: initial; font-weight: normal}
span.sansserif {font-family: sans-serif; font-weight: normal}
ul.no-bullet {list-style: none}
-->
</style>


</head>

<body lang="en">
<a name="RL78-Options"></a>
<div class="header">
<p>
Next: <a href="RS_002f6000-and-PowerPC-Options.html#RS_002f6000-and-PowerPC-Options" accesskey="n" rel="next">RS/6000 and PowerPC Options</a>, Previous: <a href="RISC_002dV-Options.html#RISC_002dV-Options" accesskey="p" rel="prev">RISC-V Options</a>, Up: <a href="Submodel-Options.html#Submodel-Options" accesskey="u" rel="up">Submodel Options</a> &nbsp; [<a href="index.html#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="Option-Index.html#Option-Index" title="Index" rel="index">Index</a>]</p>
</div>
<hr>
<a name="RL78-Options-1"></a>
<h4 class="subsection">3.19.43 RL78 Options</h4>
<a name="index-RL78-Options"></a>

<dl compact="compact">
<dt><code>-msim</code></dt>
<dd><a name="index-msim-7"></a>
<p>Links in additional target libraries to support operation within a
simulator.
</p>
</dd>
<dt><code>-mmul=none</code></dt>
<dt><code>-mmul=g10</code></dt>
<dt><code>-mmul=g13</code></dt>
<dt><code>-mmul=g14</code></dt>
<dt><code>-mmul=rl78</code></dt>
<dd><a name="index-mmul"></a>
<p>Specifies the type of hardware multiplication and division support to
be used.  The simplest is <code>none</code>, which uses software for both
multiplication and division.  This is the default.  The <code>g13</code>
value is for the hardware multiply/divide peripheral found on the
RL78/G13 (S2 core) targets.  The <code>g14</code> value selects the use of
the multiplication and division instructions supported by the RL78/G14
(S3 core) parts.  The value <code>rl78</code> is an alias for <code>g14</code> and
the value <code>mg10</code> is an alias for <code>none</code>.
</p>
<p>In addition a C preprocessor macro is defined, based upon the setting
of this option.  Possible values are: <code>__RL78_MUL_NONE__</code>,
<code>__RL78_MUL_G13__</code> or <code>__RL78_MUL_G14__</code>.
</p>
</dd>
<dt><code>-mcpu=g10</code></dt>
<dt><code>-mcpu=g13</code></dt>
<dt><code>-mcpu=g14</code></dt>
<dt><code>-mcpu=rl78</code></dt>
<dd><a name="index-mcpu-8"></a>
<p>Specifies the RL78 core to target.  The default is the G14 core, also
known as an S3 core or just RL78.  The G13 or S2 core does not have
multiply or divide instructions, instead it uses a hardware peripheral
for these operations.  The G10 or S1 core does not have register
banks, so it uses a different calling convention.
</p>
<p>If this option is set it also selects the type of hardware multiply
support to use, unless this is overridden by an explicit
<samp>-mmul=none</samp> option on the command line.  Thus specifying
<samp>-mcpu=g13</samp> enables the use of the G13 hardware multiply
peripheral and specifying <samp>-mcpu=g10</samp> disables the use of
hardware multiplications altogether.
</p>
<p>Note, although the RL78/G14 core is the default target, specifying
<samp>-mcpu=g14</samp> or <samp>-mcpu=rl78</samp> on the command line does
change the behavior of the toolchain since it also enables G14
hardware multiply support.  If these options are not specified on the
command line then software multiplication routines will be used even
though the code targets the RL78 core.  This is for backwards
compatibility with older toolchains which did not have hardware
multiply and divide support.
</p>
<p>In addition a C preprocessor macro is defined, based upon the setting
of this option.  Possible values are: <code>__RL78_G10__</code>,
<code>__RL78_G13__</code> or <code>__RL78_G14__</code>.
</p>
</dd>
<dt><code>-mg10</code></dt>
<dt><code>-mg13</code></dt>
<dt><code>-mg14</code></dt>
<dt><code>-mrl78</code></dt>
<dd><a name="index-mg10"></a>
<a name="index-mg13"></a>
<a name="index-mg14"></a>
<a name="index-mrl78"></a>
<p>These are aliases for the corresponding <samp>-mcpu=</samp> option.  They
are provided for backwards compatibility.
</p>
</dd>
<dt><code>-mallregs</code></dt>
<dd><a name="index-mallregs"></a>
<p>Allow the compiler to use all of the available registers.  By default
registers <code>r24..r31</code> are reserved for use in interrupt handlers.
With this option enabled these registers can be used in ordinary
functions as well.
</p>
</dd>
<dt><code>-m64bit-doubles</code></dt>
<dt><code>-m32bit-doubles</code></dt>
<dd><a name="index-m64bit_002ddoubles"></a>
<a name="index-m32bit_002ddoubles"></a>
<p>Make the <code>double</code> data type be 64 bits (<samp>-m64bit-doubles</samp>)
or 32 bits (<samp>-m32bit-doubles</samp>) in size.  The default is
<samp>-m32bit-doubles</samp>.
</p>
</dd>
<dt><code>-msave-mduc-in-interrupts</code></dt>
<dt><code>-mno-save-mduc-in-interrupts</code></dt>
<dd><a name="index-msave_002dmduc_002din_002dinterrupts"></a>
<a name="index-mno_002dsave_002dmduc_002din_002dinterrupts"></a>
<p>Specifies that interrupt handler functions should preserve the
MDUC registers.  This is only necessary if normal code might use
the MDUC registers, for example because it performs multiplication
and division operations.  The default is to ignore the MDUC registers
as this makes the interrupt handlers faster.  The target option -mg13
needs to be passed for this to work as this feature is only available
on the G13 target (S2 core).  The MDUC registers will only be saved
if the interrupt handler performs a multiplication or division
operation or it calls another function.
</p>
</dd>
</dl>

<hr>
<div class="header">
<p>
Next: <a href="RS_002f6000-and-PowerPC-Options.html#RS_002f6000-and-PowerPC-Options" accesskey="n" rel="next">RS/6000 and PowerPC Options</a>, Previous: <a href="RISC_002dV-Options.html#RISC_002dV-Options" accesskey="p" rel="prev">RISC-V Options</a>, Up: <a href="Submodel-Options.html#Submodel-Options" accesskey="u" rel="up">Submodel Options</a> &nbsp; [<a href="index.html#SEC_Contents" title="Table of contents" rel="contents">Contents</a>][<a href="Option-Index.html#Option-Index" title="Index" rel="index">Index</a>]</p>
</div>


</body>
</html>