teensy-cores

Commit graph

Autor	SHA1	Nachricht	Datum
PaulStoffregen	88dce04d81	Add extra K66 pin defines	vor 8 Jahren
Paul Stoffregen	42b873097e	Merge pull request #153 from KurtE/Serial2-SetTx/Rx-error Serial2.setTx and Serial2.setRX should check Uart1	vor 8 Jahren
Kurt Eckhardt	1bb20b3b61	Serial2.setTx and Serial2.setRX should check Uart1 These two functions were checking (SIM_SCGC4 & SIM_SCGC4_UART2) and should be testing (SIM_SCGC4 & SIM_SCGC4_UART1)	vor 8 Jahren
PaulStoffregen	bb95e546fe	Increase startup delay slightly	vor 8 Jahren
PaulStoffregen	aeff63583d	Document flash security locking technique	vor 8 Jahren
PaulStoffregen	39d9fdc386	Fix compiler warnings with USB audio	vor 8 Jahren
Paul Stoffregen	77411348a4	Merge pull request #152 from FrankBoesing/patch-1 fix SDHC_XFERTYP_RSPTYP	vor 8 Jahren
Frank	61dce339b0	fix SDHC_XFERTYP_RSPTYP	vor 8 Jahren
PaulStoffregen	de0677a6e0	Enable VREF on K66 fixes #145	vor 8 Jahren
Paul Stoffregen	6002a8710c	Merge pull request #146 from KurtE/SPI1-defined Spi1 defined	vor 8 Jahren
Paul Stoffregen	3ab443fd1a	Merge pull request #151 from KurtE/PulseIn-LC PulseIn on LC issue	vor 8 Jahren
Kurt Eckhardt	eb97df1ffe	PulseIn on LC issue PulseIn may fail on LC as it is using *reg to test the value for on or off, but on LC register is a bitmask associated with several IO pins. So split off for LC to use the MASK value for the pin to test high and low. Warning did not update timings for this, which may be necessary as adds an & in the loop. However when I tried TLC for 5000us timeout, it timed out with 5138us, if I decremented the PULSEIN_LOOPS_PER_USEC by one, then it timed out at 4398... This was at 49mhz.	vor 8 Jahren
PaulStoffregen	4b7151d0e0	Fix compiler warning with Keyboard.set_modifier	vor 8 Jahren
Kurt Eckhardt	57be6914a5	Serial1 - New pins work with begin	vor 8 Jahren
Kurt Eckhardt	94ce960eef	SPCR1 operations now defined	vor 8 Jahren
PaulStoffregen	31c9626281	Fix some USBHS register bit names	vor 8 Jahren
Paul Stoffregen	2d37d6e087	Merge pull request #148 from duff2013/master Set FlexBus Clock Divider to correct value for 16, 8, 4 MHz	vor 8 Jahren
duff2013	87274341bd	Set FlexBus Clock Divider to correct value for 16, 8, 4 MHz	vor 8 Jahren
Paul Stoffregen	d07a9215a4	Merge pull request #147 from duff2013/master update LLWU reg.	vor 8 Jahren
duff2013	484098c794	update LLWU reg.	vor 8 Jahren
PaulStoffregen	9f1f15a53e	Add SDHC register bit defs	vor 8 Jahren
PaulStoffregen	0e35a31068	Add ethernet register bit defs	vor 8 Jahren
PaulStoffregen	8d7b44f384	Merge branch 'master' of github.com:PaulStoffregen/cores	vor 8 Jahren
PaulStoffregen	fdf57f66c6	Add USBHS register bit defs	vor 8 Jahren
Kurt Eckhardt	1c2f6dca35	Optional: Add SPI2... Just in case the extra pads are added to bottom of 3.4/3.5 board, define is in place...	vor 8 Jahren
Kurt Eckhardt	305fb4da93	SPI1 on T3.4/3.5 - Add SPCR1	vor 8 Jahren
Kurt Eckhardt	91f8f30c04	Add SPI1 to kinetis.h for T3.4 and T3.5 Added define for SPI1 registers	vor 8 Jahren
Paul Stoffregen	3ab6f0380f	Merge pull request #144 from FrankBoesing/patch-1 add additonal F_TIMER (FTM_MOD)	vor 8 Jahren
Frank	c0921e7b0d	add additonal F_TIMER (FTM_MOD) ...were missing :)	vor 8 Jahren
PaulStoffregen	d79723c252	Easier F_BUS overclocking	vor 8 Jahren
PaulStoffregen	be42e0574e	Fix DMA on K66	vor 8 Jahren
Paul Stoffregen	ebc6460ff4	Merge pull request #142 from FrankBoesing/master Add missing F_BUS	vor 8 Jahren
Frank Bösing	dfd60bee72	add missing F_BUS to SPIFIFO	vor 8 Jahren
Frank Bösing	8752969dbb	Add missing F_BUS	vor 8 Jahren
PaulStoffregen	e2e07e5394	Fix DMAMUX for K66	vor 8 Jahren
PaulStoffregen	ddb7fb0267	Add I2C clock divider names	vor 8 Jahren
PaulStoffregen	575f309209	Fix EEPROM on K66	vor 8 Jahren
PaulStoffregen	759ba1b417	Fix touchRead on K66	vor 8 Jahren
PaulStoffregen	7a2c0037b8	Use IRC48M clock for USB when F_CPU is 180 or 216 MHz	vor 8 Jahren
PaulStoffregen	6856d4eedc	Fix analogRead on K66	vor 8 Jahren
PaulStoffregen	7c963d5269	Use SIM_SCGC6 for RNG to match register defs	vor 8 Jahren
PaulStoffregen	5eab8dd0b8	Fix pin numbers for transmit opendrain on Serial4 & Serial5	vor 8 Jahren
Paul Stoffregen	9f87a7b766	Merge pull request #139 from KurtE/T3-5-Serial1-new-TXRX-pins Add support for pins 26 and 27	vor 8 Jahren
Paul Stoffregen	cd8cd50f05	Merge pull request #140 from FrankBoesing/patch-1 Fix for crash @ 48 & 24MHz on K66	vor 8 Jahren
Kurt Eckhardt	7458590a29	Allow SetTX on Serial3/4/5 ... On Serial 3 this addition is for all 3.x. Before it was ifdefed to only do work on Teensy_LC as there is only one valid TX pin. But we now pass in open drain as an option so this code should allow you to not turn it on/off on Serial3 on all of these boards and on Serial4 and Serial5 on the new boards.	vor 8 Jahren
Frank	27f9bd8f0f	Frix for crash @ 48 & 24MHz	vor 8 Jahren
Kurt Eckhardt	c9bec4c380	Serial2 - !TX(31) !RX(26) on T3.5 Updated Serial2. It had valid TX for T3.2 of 10 and 31, but 31 on T3.5 is RX4 Likewise RX for T3.2 of 9 and 26, but on T3.5 26 is RX1	vor 8 Jahren
Kurt Eckhardt	491e1e21ca	Add support for pins 26 and 27	vor 8 Jahren
PaulStoffregen	8b3d33689e	Add Serial4 & Serial5 for K64 & K66	vor 8 Jahren
PaulStoffregen	6040145aac	More K66 overclocking options	vor 8 Jahren

1 2 3 4 5 ...

473 Commits (88dce04d81f36bd4607bcd99e7cf43d5d70b204d) Alle Branches Suchen

473 Commits (88dce04d81f36bd4607bcd99e7cf43d5d70b204d)

Alle Branches