PaulStoffregen
fa1f446555
Add link to info about usb_tx_packet_count() function & USB packet latency
4 years ago
Kurt Eckhardt
d28e889454
T3 - Bug in PINC
Reading wrong register for one bit...
5 years ago
PaulStoffregen
73ea157600
Add comment with link to PORT_PCR_ISF polling example
5 years ago
PaulStoffregen
5e3ce5a4ca
Require the vector table on Teensy 3.x, even for programs referencing nothing
5 years ago
PaulStoffregen
571493c10e
Allow huge serial buffers on Teensy 3.x
5 years ago
PaulStoffregen
63aba265db
Fix digitalPinHasPWM on T3.6 & analogInputToDigitalPin on T3.5 & T3.6
5 years ago
Mikolaj
d7a15b0210
Added the ability to parametrize Teensy 3 core USB init delays through compiler defines (TEENSY_INIT_USB_DELAY_BEFORE, TEENSY_INIT_USB_DELAY_AFTER). When defines are not present, default values are used, depending on teensy version.
5 years ago
PaulStoffregen
019c928ac4
Add empty cache functions, for T4 backwards compatibility
5 years ago
PaulStoffregen
1b1f95315f
Improve startup behavior on Teensy 3.6 with external slowly rising power
5 years ago
PaulStoffregen
c4fe5e9303
Fix compiler warning
5 years ago
Frank
1badfa2ccd
add nullptr check
5 years ago
Frank
afefd37bc7
Make sure DONE Bit is cleared.
5 years ago
Frank
1d59fe6df4
Update Stream.cpp
5 years ago
Frank
be0b44bceb
Update Stream.cpp
5 years ago
Frank
07df732e2b
Update Stream.cpp
5 years ago
Frank
8d01550ff3
Update Stream.cpp
5 years ago
Pete
7a309dfb89
Update AudioStream.cpp
5 years ago
PaulStoffregen
238b102ac4
Add model identification to linker scripts for all Teensy 3.x boards
5 years ago
PaulStoffregen
44359dcf6b
Add comments about EEPROM size config
5 years ago
PaulStoffregen
556b4b4c5d
Fix asm in delayMicroseconds on Teensy LC (Frank B)
fixes #288
5 years ago
dav1901
20b527d01a
Fix typo
6 years ago
dav1901
59402d1e7e
Fix typo
6 years ago
Frank Bösing
b7b51f0a91
Revert "Revert "F_BUS 128MHz for SPIFIFO.h""
This reverts commit 5dade02144
.
6 years ago
Frank Bösing
5dade02144
Revert "F_BUS 128MHz for SPIFIFO.h"
This reverts commit c2e28e0a27
.
6 years ago
Frank
c2e28e0a27
F_BUS 128MHz for SPIFIFO.h
6 years ago
Frank Bösing
7d43e33fbe
cosmetic changes
6 years ago
Frank Bösing
f6d7053eb5
F_BUS 128MHZ for pins_teensy.c
6 years ago
Frank Bösing
72d7b11fb6
F_BUS 128MHz analog.c
6 years ago
Frank Bösing
11bd76352d
FCPU 256MHz
6 years ago
PaulStoffregen
c425ecbd0a
Fix serial end() when errors are received but final interrupt never runs
6 years ago
PaulStoffregen
0444986638
Update makefile
6 years ago
PaulStoffregen
cb6289fd85
Avoid USB bug related with O2 optimize
6 years ago
PaulStoffregen
92533cb5ce
Remove ancient BYTE define (causes more trouble than it's worth)
6 years ago
PaulStoffregen
87f6186546
USB MIDI - don't hog transmit buffers
6 years ago
PaulStoffregen
831d3b40b1
Fix typo
6 years ago
PaulStoffregen
a95bccf37f
Update sample Makefile for next release number
6 years ago
PaulStoffregen
e1676586f1
Support generic UDP beginMulticast()
6 years ago
Jon Eyolfson
41705a8324
Change `getIsrTable` from `inline` to `static inline`
Newer versions of GCC (8.1.0 in my case) default to `-std=gnu11` (I believe), which expects `inline` to have an external definition. The `Makefile` (I ran it with `NO_ARDUINO` set) doesn't specify any C_FLAGS. Therefore gcc uses the new default value, instead of the old C99 standard. In this case you'll get a linker error for `getIsrTable` not being defined. This change allows the code to successfully compile with new versions of gcc. This change works with the old default std of gcc. For much older versions of gcc it might be better to explicitly set the `std` in `CFLAGS` within the `Makefile`.
6 years ago
PaulStoffregen
fc79132670
Fix Keyboard.print('#') on UK & Irish keyboard layouts
6 years ago
Jim Thoenen
0126257caa
Only enable C++ set_media API if KEYMEDIA_INTERFACE is defined.
6 years ago
PaulStoffregen
9b5d9f9632
Use same USB PID for flight sim controls
6 years ago
PaulStoffregen
6a30e80658
Add bcdDevice info to help teensy_ports identify models
6 years ago
PaulStoffregen
86f64c1a9f
Fix Teensy 3.5 stack alignment (thanks Frank)
6 years ago
PaulStoffregen
27cdeb1cb9
Teensy LC does not support saturate instruction
6 years ago
shkshk90
edc3f0c12b
Add saturate instruction
Use ARM's unsigned saturate instruction to limit the value, to be written to DAC, to 11 bits (range 0 to 4095).
6 years ago
shkshk90
b90f36c8b7
Update analog.c
6 years ago
PaulStoffregen
6d441162e6
Fix FTM_CONF register bitfield defs
6 years ago
PaulStoffregen
5fdbe446bc
Fix DMAChannel transferSize() on Teensy LC
fixes #266
6 years ago
PaulStoffregen
abe5ca8072
Include <Arduino.h> first, for precompile header rebuild all speedup
6 years ago
PaulStoffregen
148efde0f2
Enable use of 256K RAM on Teensy 3.5
6 years ago