Semi automated routing, SGTL members renamed & gain/volume set around 1

Fixed AudioSynthWaveform. Uses LUT with linear interpolation for sinewav...

Square, triangle and sawtooth are generated directly.

Bit of a fight with the github client, heaps of distraction and no time
delayed me getting back to this. Sorry.

While changing everything else I also modified most things regarding
gain or volume from using 0 to 100 (or -100 thru 0 to 100) to using 1
(or -1 to 1) with only one exception I can think of right now in the
autoVolumeControl(..); - I modified all examples I found .volume or
similar in to suit.

I found opportunity to write these changes, I did not have a chance to
test much more extensively than just compiling it. I will have a chance
to test them by about 24 hours time.

min and max resetting to 0 each reset wasn't as accurate in a shortened
sampling time as making them the opposite of their potential maximums.

removed conditional serial prints as well, they were a hangover from
trying to make AudioInputAnalog & AudioOutputAnalog cooperate in a 'non
standard' order for my current pet project.

Considered renaming Dpp() to what it is abbreviating, being
DataPeak2Peak, but not sure that is a good name anyway.

The alternative route(..) was declared as unsigned short but was not
return anything.

Adding route() made me review dap_enable() more closely and it wasn't
doing what I intended to do before, it was ignoring I2S coming back from
Teensy, DAP was sourced from ADC as was I2S_DOUT and DAC was sourced
from DAP; Teensy received valid data from ADC but data from Teensy was
just discarded if user selected it.

Remove old version of AudioSynthWaveform. Fix sine wave generation to cl...

Fix #20

Play William Tell Overture using new AudioSynthWaveform

Add adc_hpf() to allow control of ADC high pass filter.

unsigned short .adc_hpf(uint8_t bypass, uint8_t freeze);
unsigned short .adc_hpf(uint8_t bypass);
bypass & freeze as defined on page 34 of the SGTL5000 datasheet.

Actual fix for multiple filter sets in AudioFilterBiquad

I am tired of seeing Serial.begin(9600); where 9600 is not going to be
used at all. Can Serial.begin(Serial.baud()); be acceptable?

Untested, will test it personally in next couple of days but sincerely
expect it will work so committing.

Todo: Test properly. Improve comments and possibly link to wiring
example(s).

modified an older 'detached' copy of the example source to try multiple
filters out and didn't notice the old comments till reviewing later.

Simplistic visual peak meter just outputs to terminal.

My manipulation of the contents of *data instead of the value of data
itself was foolish at best - forgot to leave the * off for my intent.