but it is CS5 which encodes to 0x20 and our
macros only handled up to 0x1f... so changed
to 0x3f.

Tested on my ILI9341_t3n test now works with DC on 45... Needs change in Core as well

A define was under a #ifdef that it should not have been

Merged in the SPI.transfer(buf, retbuf, cnt)  version.

Also merged in the SPI.transfer(buf, retbuf, cnt, event_responder) version that does DMA access.

The current table code was setup that when we choose a specific pin for MOSI or Miso or SCK (or CS), that the only thing set at the time was the MUX value.

Well the old enable_pins that was called off of the enumlated register was setting the PORT_PCR_DSE option on pins 11 and 13...

So to fix it, I have the table, allow you to fully set the options for each pin.
Still have most all of them just setting the MUX, but do have pins 11 and 13 setting the PCR_DSE option to be compatible with old code.

Update SPI.transfer(buf, cnt) to use the FIFO queue to speed things up.
It also speeds things up to pack the data into 16 bit transfers instead
of 8 bits.

As this code is more complicated,  no longer makes sense to inline it,
so functions moved from .h to .cpp files.

SPI1 and SPI2 transfer functions were updated as well for T3.5 and T3.6

This adds support for optionally being able to use the SDCard pins for
SPI1.

This change requires the corresponding changes in the CORES project

Added SPI2 support for T34/T35 boards

These changes plus some changes in core (added register defines, plus
added logical SPCR1 register), allowed me to do quick hack to
serialFlash library and test and initialize flash memory using 3.5 test
board connected to prop shield using pins 0, 1, 20 and 6

In the comments: "Teensy 3.x" changed to "Teensy LC". Or is the LC also part of the "3" family?

http://forum.pjrc.com/threads/26776-Teensyduino-1-20-Released?p=56316&viewfull=1#post56316